Adding an effect to a sound, not the entire track
Hey All, I am looking to simply add a effect to a single sound, not the entire track, is that possible with Logic? I am coming from pro tools, and I know I was able to do that there, I was hoping I could do the same here. Thanks so much!
By add effect, I assume you mean add some delay or reverb one one particular note or word. Several ways to do this. Put the effect plug-in on a bus return, and then automate the send level to come up/down for that one incident.
Another way would be to make a 2nd track (audio or midi), Insert the effect on that track, and cut the phrase or note, and move down to that 2nd track. So the whole track would be dry, and that one word, note, would have the effect on the next track.
Make sure levels are similar
Similar Messages
-
We have bought an Apple TV, and have downloaded the sky sports app. We are trying to watch this via airplay, but we are only managing to get the sound, not the picture. Any ideas??
Sky do not allow the app to work with Airplay.You will only get sound.
-
My movies library is getting frighteningly large, and I want to move it (not the entire library) to an external HD, and still be able to watch the movies (when the HD is connectec). How would I do that?
It's not a feature of iTunes but can be done using various work-arounds.
Small hard drive? Split your iTunes library across multiple volumes - http://www.macyourself.com/2009/04/24/small-hard-drive-split-your-itunes-library -across-multiple-volumes/ - copying media folders to external, then deleting from internal, then adding again.
Splitting & Managing Your iTunes Library - http://machintsandtips.com/i-j-k/itunes/splitting-managing-your-itunes-library/ - using option+drag to override iTunes from copying file to your default media folder.
https://discussions.apple.com/message/10160819#10160819 - Change location of media folder to start putting files on second drive. Note later follow-up post about leaving 'organize media' and 'copy to drive' checked.
TuneSpan: (OS X app) A utility that allows you to distribute the media files in your iTunes Library across multiple drives. - http://tunespan.com/ - https://itunes.apple.com/us/app/tunespan/id528459889?mt=12 - Requirements: OS X 10.6.6 or later, 64-bit processor -
How do I send just a song to someone and not the entire album?
How do I send just a song to someone and not the entire album??
If you are using an iOS device then no, I don't think that you can gift a song, it will need to be the whole album. If you are using your computer's iTunes, and it's not an album-only track, then you should be able to gift individual songs via the downward pointing arrow next to the song's price.
-
How do I sort a selection, not the entire table?
I have a spreadsheet in numbers that I only need to sort a selected section, not the entire table. In the previous version of numbers, it allowed 'sort selected range', but I can't find that in the newer version. When I have the selection outlined, the entire table sorts -- ??
Ann,
Nobody here in the Discussions has reported finding a way to sort selected rows, as was possible in Numbers 2.3. It seems that it was just left out of the new version to streamline the interface.
The workaround would be to structure your Tables such that content requiring separate sorting would be in a separate table.
Jerry -
Firefox will only zoom text, not the entire page.
Hi. Recently I was using Youtube and ran into a bit of a problem. When ever I zoom the page it only zooms the text, not the entire page. Ive tested it on other pages like google.com and it workes fine and zooms the whole page. Also, when I use youtube.com. the page works perfectly, but I cant sign in because there are no cookies. Ive also tried uninstalling firefox and deleting the firefox folder but with no luck. This might be because I accidentally pressed CTRL and ? when I was typing as I ment to press shift.
Reload the webpage while bypassing the cache using '''one''' of the following steps:
*Hold down the ''Shift'' key and click the ''Reload'' button with a left click.
OR
*Press ''Ctrl'' + ''F5'' or ''Ctrl'' + ''Shift'' + ''R'' (Windows and Linux)
*Press ''Command'' + ''Shift'' + ''R'' (Mac)
Then try logging in ,it might solve the problem.
Let us know if this solves the issues you are having.
Thanks! -
I have head phones with the rubber ear buds. Where can I buy additional rubber ear buds; not the entire head phone? Because the rubber piece slips on and off easily, I have lost several of them.
Start by going to the manufacturer's website (if it is non-Apple)
-
Want to know bow to block part of a website, not the entire website.
I am aware how to block entire websites through the host file or through extensions, but I've looked all over google and can't find a way to just block one specific url. I don't want to block the entire site, I just want to block one page on that site. If anyone out there has figured out a way to just block a specific url within a website and not the entire website, I'd be happy to hear from you :)
== This happened ==
Every time Firefox opened
== foreverMaybe one of these work:
* LeechBlock: https://addons.mozilla.org/firefox/addon/4476
* BlockSite: https://addons.mozilla.org/firefox/addon/3145 -
Example: Eminem 'Encore' has multiple artists on the entire track list. Several songs will just list Eminem as the artist, but a lot will have Eminem, FEATURING...so and so. Each song that has "FEATURING" shows up as a different album, so if you are not paying attention, and pull all the songs from a particular album over to your ipod, for example, and you don't see that not all the songs are there, you won't get them all to transfer.
Is there anyway to correct this?Each tune gets a file name - that is how iTunes works. iTunes is a data base manager.
In a PlayList a reference is created that will link to a specific tune.
You can take the tunes that you do not want listed under a particular album name and change the album name using 'Get Info' for that tune(s) from the iTunes window.
MJ -
Adding music to more than one slide and not the entire presentation
I love the way Keynote looks and behaves, but it fails to compete with PPT on certain aspects, such as adding the same audio track to more than one slide and NOT have it play for the entire presentation. Using PPT (and I hate PCs!) you can have a track play for "n" number of slides. I'm frustrated that I cannot do this with Keynote! I don't want the track as a soundtrack for the entire presentation. I want to add another audio track to, say, the last two or three slides only and something else for all the other slides. I looked through the user manual, forums, etc. and found that I can only add a soundtrack to the entire thing or a different audio to only one slide.
Question: What if I cut (that last two slides) and paste the the slides as a new Presentation with its own soundtrack, then reincorporate that back and paste it into the original presentation? Will that work or will the original soundtrack take over the entire presentation again?Anyone remember Claris Works for Mac back in the early 90s? Now, that was a gem! What were they thinking when they got rid of that one (and replaced it with AppleWorks!)?
Good point, but one which Apple has heard a zillion times, and so sadly chosen to ignore. The really heartbroken among us remember AppleWorks from the mid-'80's, the world's first integrated suite, then ClarisWorks, then AppleWorks; and, of course, Beagle Bros. and BeagleWorks. But since we old f*s are dying off, those complaints will eventually stop. +Sic transit gloria mundi.+ -
No sound, not the MIDI problem
No sound in Safari 3.0.2, NOT the MIDI resetting problem.
sound prefs are set correctly.
help appreciated.
macbook Mac OS X (10.4.10)Hi
Welcome to Apple Discussions
Another possible remedy is to open Garage Band, if it is installed on your system. Then restart the computer/Safari and see if the sound returns. -
Adding a Preloader to a Symbol, not the Stage. How?
I have a local video (not one hosted on YouTube/Vimeo) as part of a Symbol. Since it's a local video and may take a while to load once the button to load it is clicked, I'd like to add a Preloader to either the video itself, or to the Symbol. It's easy enough to do this to the entire Stage, but I just want the Preloader to appear when the Symbol it's in is loaded onto the Stage. How do I do this?
ThanksHi,
You can do it using the "poster" attribute: HTML video poster Attribute
I assumed that you have one and only one video and you have a preloader within the images folder, so:
sym.$("video").attr("poster", "images/myPreloader.gif"); -
How can I set the submit button to email only certain pages of the pdf not the entire pdf?
We have a pdf that is a hundred pages or so where each page is an individual product that the customer can select for purchase. At the end of the pdf is an order form. We want to be able to email just the few pages which are the form as a pdf. The default function of the submit button is to email back the entire pdf. As there any way to just select whcih pages would be submitted?
The problem is for people not using an email client like Outlook. In the version of Reader my boss was using, you had to save the FDF file to your hard disk and then open your browser to go to your web based email and write an email and attach the file. In the newest version of Reader it will open a browser window and create a draft for you, but he thought it was to much work if people were using older versions of Reader. He was really looking for something straightforward where all they had to do is push a button and it was submitted.
-
i made a video in final cut pro x. The entire thing isn't that long, however when it comes to sharing it only the very first few seconds are playe.
Thanks,
Jamiesee where the clip ends and then the timeline becomes black? when i add on an extra clip that line thing with the arrow does not move and if i try to export the video not all of it is played, just till that arrow.
-
I've made sure i've updated my plugins and made sure my graphics drivers are all up to date. I'm running windows 7, & firefox 24. I've noticed ever since firefox came out with a new version of the browser, i'm not able to watch an entire video online. (mtv, hulu, etc.) it only lets me view just the beginning portion of it, then it stops playing and at the bottem of the video it says "the video will return shortly" but never plays again. I do however am able to see an entire video on youtube. Any suggestion on how to solve the problem i am having. I know its not the website because ive used a different browser and i'm able to view an entire video online.
If you use extensions (Firefox/Tools > Add-ons > Extensions) that can block content (e.g. Adblock Plus, NoScript, Flash Block, Ghostery) then make sure that such extensions aren't blocking content.
Start Firefox in <u>[[Safe Mode|Safe Mode]]</u> to check if one of the extensions (Firefox/Firefox/Tools > Add-ons > Extensions) or if hardware acceleration is causing the problem (switch to the DEFAULT theme: Firefox/Firefox/Tools > Add-ons > Appearance).
*Do NOT click the Reset button on the Safe Mode start window.
*https://support.mozilla.org/kb/Safe+Mode
*https://support.mozilla.org/kb/Troubleshooting+extensions+and+themes
Also make sure that your security software isn't blocking the videos or otherwise interfering.
Maybe you are looking for
-
How do I get the messgae icon to show number of unread messages?
How do I change the message icon on the 5s to show the number of unread messages?
-
In order to connect to my network I need the MAC-address of my brand new iPad Air. I have to setup the MAC in my router before it allows logging in.
-
Is there any way to download files on my computer from different websites i have created?
don´t know what happened but by any reason i cannot find my folders that contain all the files of different websites i have created, in my computers. So my question is if is there any way i can download those files from the business catalyst into my
-
[SOLVED] Cron Job that starts every 30 minutes from boot
I wish to have a cron job that runs a script every 30 minutes from boot, without any users logging in. I know about crontab -e, but I think that would I only run once i'm logged in. I've also heard about @reboot, but that would only run the script on
-
Hi - I am setting up a new website and am pretty new to this. I'm not sure if this can be done but can you create links to other websites (not just a page within my site)? i.e. Can I have a link to a friend's website? Thank you for the help! Regards,