Adding anchor is adding a 'sub-layer' ! help!

Help!! I haven't had this happen before,.... I created and
named a layer. Typed in a header and added an anchor -- BUT THE
ANCHOR DOESN"T APPEAR! I find it 1/2 way down my page, in a newly
created layer! When i loof at the 'layers" panel, it is in fact a
??sub-layer' under the one i created -- but when i delete the
'sub-layer' it deletes the layer i created... WHAT IS
HAPPENING>?and how can i stop it! thanks so much!!
CMW

Can't have two elements on the same page with the same name,
or the same ID.
Murray --- ICQ 71997575
Adobe Community Expert
(If you *MUST* email me, don't LAUGH when you do so!)
==================
http://www.projectseven.com/go
- DW FAQs, Tutorials & Resources
http://www.dwfaq.com - DW FAQs,
Tutorials & Resources
==================
"cmckayw" <[email protected]> wrote in
message
news:ffqiq3$il0$[email protected]..
> Resolved! i was naming the ancho the same term i named
the layer --
> apparently that's not a good idea... I just change the
anchor name and it
> works fine... thanks anyway ;-)

Similar Messages

Adding a new field to the search help exit

Hi friends,
adding a new field to the search help exit. How does it work ?
Thanks in advace
Ilhan

The search help exit allows you to modify functionality of search help. If you add a new field to the
parameter list that is not contained on the selection method you can manually populate it within the search
help exit.
This would be performed within the u2018STEP DISPu2019 section. Once within this section all search help
data has been retrieved and is stored in table RECORD_TAB (record_tab-string) as one long string value.
Therefore you need to read table SHLP in-order to locate position of value within string.
Example:
To find position of personnel number (PERNR) within elemenory search
help M_PREMN you would use the following code:
Loop at record_tab.
     read table shlp-fielddescr into wa_shlp
                                   with key tabname   = 'M_PREMN'
                                            fieldname = 'PERNR'.
You could then use this information in the following way, for
example, to find a persons organisation unit:
      select orgeh endda
        up to 1 rows
        from pa0001
        into (ld_orgeh,ld_endda)
       where pernr eq record_tab-string+wa_shlp-offset(8)
                                                  u201Cpernr length is 8
       order by endda descending.
      endselect.
      select single orgtx
        from t527x
        into ld_orgtxt
       where orgeh eq ld_orgeh and
             sprsl eq sy-langu and
           ( endda ge sy-datum and
             begda le sy-datum ).
If you have added a new field to the end of the parameters list
the next step is to populate it by adding this data to the end of
the record_tab string:
concatenate record_tab-string ld_orgtxt into record_tab-string.
modify record_tab.
endloop.

I can't send e-mail because I keep getting this error: "If you are sending a link, try adding some text to it. This helps us fight spam."

I just downloaded Firefox and have been unable to send ANY emails because of the following error:
Unable to send mail.
If you are sending a link, try adding some text to it. This helps us fight spam.

Firefox doesn't do email, it's strictly a web browser.
If you are using Firefox to access your mail, you are using "web-mail". You need to seek support from your service provider or a forum for that service.
If your problem is with Mozilla Thunderbird, let us know and we can move this thread to the Thunderbird queue. This question currently is in the Firefox queue for answers.

HT1692 I am not able to scroll my contacts. If i add or mahe any change in existing contacts, it appaers at the top of the contacts and freezes rest above the first letter of newly added or changed one. Anyone can help?

I am not able to scroll my contacts. If i add or mahe any change in existing contacts, it appaers at the top of the contacts and freezes rest above the first letter of newly added or changed one. Anyone can help?

Hi,
>>1. how can i align Title(DCS Clinical Report-Technician wise) center of pdf report with image named:logo5.png immediately coming to it's right?.
2. how do i add the given below row and it's data to my top my table in pdf report from c# windows forms using itextsharp?
3.how to make my column headers in bold?<<
I’m sorry for the issue that you are hitting now.
This itextsharp is third party control, for this issue, I recommended to consult the control provider directly, I think they can give more precise troubleshooting.
http://sourceforge.net/projects/itextsharp/
Thanks for your understanding.
Regards,
Marvin
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

When printing from Preview, the document prints with large print and many lines added and pages added

When printing from Preview, the document prints with large print and many lines added and pages added. Why does this happen?

Thank you!!! That was the problem--scale was set at 200% (don't know why)--when I reduced it to 100% it printed perfectly.
Thanks again for helping me resolve this problem.

Illustrator CS 5.1 text sub layer problems

Some issues happening with text sub layers, any insight into correcting would be great.
1) The show/hide eye icon for the sub layers has no effect - text always shows.
Show/hide works for the full layer and for object sub layers, but not for any sub layer with text.
2) Text can NOT be selected on art board, it is behaving as if locked if you try to select on the art board, but is not.
Can select the text sub layer in the layers panel. Can select all on the layer in art board, but not text items individually. Can select objects individually on art board.
3) Many of mentioned text sub layers, but not all, also show a solid dot in right hand layers column indicating that they have appearance attributes applied. However no attribures are actually applied and remove attributes is grayed out.
I'm thinking that I hit some strange quick key combo by mistake that has done some wacky lock thing, but I can't find any indication of such.
Tried ungrouping all, unlocking all for the layer and the whole file with no change.
Any thoughts?
- Alice

There's a weird bug/issue with appearances applied at the layer state. Once they are applied, they can't be removed. That may be why your'e seeing the meatball to the right of the layer name. As far as I know the only way to remove that Appearance indicator is to copy/paste to a new layer.
I can't seem to configure a file which shows your issues other than what I've posted above. I'm thinking perhaps there's a clipping mask in place?
Any change you could provide a link to a sample file with the issue?
Have you tried basic trouble-shooting of removing the AI prefs?

How do I make a clipping mask whilst preserving sub layer structure?

Hi guys,
I am editing a map and need my map split into multiple rectangular segments. My map is made up of many layers and sub layers which I need to preserve. When I clipping mask the map with a rectangle all of the map's subs layers merge into one layer. How do I make a clipping mask whilst preserving sub layer structure? It seems like a 'layer mask' is the correct tool but doesn't seem like CS6 has it?
Cheers
Mat

I avoid sublayers, because they really were never thoroughly developed, and when you open files, you get all your layers flipped open.
So for me paste in front works great for pasting a mask directly above the element you want to mask. Unfortunatley paste in front does not work well with sublayers so you will need to drag the mask down into the the sublayer. But atleast if you have a complex document with many sublayers, the paste in fornt gets you close.
eg; Mask is in clipboard, I select sublayer Illinois
After doing a paste in front, the mask (star shape) is not in the sublayer, but above
Drag the star shape down one in to the sublayer Illinois, select entire sublayer(use radio button right of the layer name)
and make clip mask

Magic wand selection shape from one layer, drop to sub layer and copy that shape from that layer.

In PS i can Magic wand selection shape from one layer, drop to sub layer and copy that selected shape from that sub layer. How do I do this in illistrator, and moreover, from multiple layer at the same time.
For instance, in PS = Import an image of gold - select a text phrse with wand - drop to gold - copy paste = gold text.
How is this done in illustrator?

Illustrator C6
Basicly I want to do what takes me 10 minutes to do in PS in Illistrator. LOL! I realize I must learn Illistrator; especially for logo design.
I want to select my objects in Illistrator and drop to another layer and copy that layer but with only the selection to create another new layer with that which I
originally selected and then copied from another layer.
1. Select objects
2. copy that selection from another image. "gold effect taken from an image"
3 paste that which was selected = that which was selected, but in gold.

Sub-layer created when breaking link to symbol bad idea?

When breaking the link to a symbol the contents is put into a sub-layer. I see no value in this and I am constantly disposing of the new layer. If it were a group it would be simple because groups don't exist without content, but layers must be deleted. Does anyone else have this grip or can you convince me this is a great new idea? I'm pretty sure this did not happen in CS4.

For those frustrated by this issue, Cense posted a good workaround:
http://forums.adobe.com/thread/684879?tstart=0
Just group the symbol before breaking link and when you "break link" the resulting artwork is a nested group instead of a sub-layer. No more useless layer to deal with.

Trouble adding new Essbase dimension to physical layer

I'm using OBIEE 10.1.3.4.2 and have created a repository where I imported an Essbase cube. That's all been fine. I recently added another layer to one of the dimensions in my cube - had Division and Market and then added System below Market. I opened the Admin tool and added the new layer/column to the physical layer. Dragged the cube to the BM&M and then the Presentation layers. When I go into Answers and begin drilling down once I select a Market the System column says organization instead of displaying valid System names.
I also created a new repository and imported the cube and everything drills down just fine. I then compared both repositories and they look identical.
Does anyone have a better approach to updating the physical layer when working with Essbase? I really don't want to create the whole thing from scratch as I am also including other sources.
Thanks,
Brad

Follwoing links will be helpful for the same:-
http://hekatonkheires.blogspot.com/2009/10/obiee-101341-essbase-931-udml-for-cube.html
http://hekatonkheires.blogspot.com/2010/01/obiee-101341-essbase-931-udml-for-cube.html
If interested you also check this link for OBIEE 11g
http://www.rittmanmead.com/2011/06/incremental-essbase-metadata-imports-now-possible-with-obiee-11g/

Update newly added IO in Cube.. ABAP help ?

Hi Experts,
Need some help here. I'm trying to write my first abap code. I have been reading the forum here and trying to understand some abap logic. The scenario is, I have added another field in my cube: CALMTH2, which I basically am trying to populate with some little abap that I have tried to learn. There is 0calmth in my cube already. I am adding some logic in the update rules to populate this field. Now 0calmth is getting values from the ods - del date field. But I was assuming to do some coding so I can derive that same date from 0calmth into my new field calmth2. Below is the code that I have written in my update rules, but I end up with the following error.
"E:Field "/BI0/OICALMONTH-0CALMONTH" is unknown. It is neither in one of the specified tables nor defined by a "DATA" statement."
DATA: CALMTH2 TYPE C.
CALMTH2 = /BI0/OICALMONTH-0CALMONTH.
RESULT = CALMTH2.
I don't really understand how the tables are used in the coding. Please help me out here with your expertise. Thanks.

Hi,
I am posting a sample code to store the text of purchasing group in a field. I am keeping all the standard comments so that it would be easier for you to identify the place where you need to put your logic.
In the start routine, you define an internal table to store all text values of purchasing group ( so that you don't hit database everytime). Then in update routine, for each purchasing grp coming from comm str, you read the internal table and passing the text as reult.
Hope it helps.
Regards,
Praveen
Start Routine*************
PROGRAM UPDATE_ROUTINE.
$$ begin of global - insert your declaration only below this line -
TABLES: /bi0/tpur_group.
DATA: it_tab LIKE /bi0/tpur_group OCCURS 0 WITH HEADER LINE.
$$ end of global - insert your declaration only before this line -
The follow definition is new in the BW3.x
TYPES:
BEGIN OF DATA_PACKAGE_STRUCTURE.
 INCLUDE STRUCTURE /BIC/CS8ZPURSCL.
TYPES:
 RECNO LIKE sy-tabix,
END OF DATA_PACKAGE_STRUCTURE.
DATA:
DATA_PACKAGE TYPE STANDARD TABLE OF DATA_PACKAGE_STRUCTURE
 WITH HEADER LINE
 WITH NON-UNIQUE DEFAULT KEY INITIAL SIZE 0.
FORM startup
TABLES MONITOR STRUCTURE RSMONITOR "user defined monitoring
 MONITOR_RECNO STRUCTURE RSMONITORS " monitoring with record n
 DATA_PACKAGE STRUCTURE DATA_PACKAGE
USING RECORD_ALL LIKE SY-TABIX
 SOURCE_SYSTEM LIKE RSUPDSIMULH-LOGSYS
CHANGING ABORT LIKE SY-SUBRC. "set ABORT <> 0 to cancel update
$$ begin of routine - insert your code only below this line -
fill the internal tables "MONITOR" and/or "MONITOR_RECNO",
to make monitor entries
select *
 from /BI0/TPUR_GROUP
 into table it_tab.
if abort is not equal zero, the update process will be canceled
ABORT = 0.
$$ end of routine - insert your code only before this line -
ENDFORM.
Update Routine************
PROGRAM UPDATE_ROUTINE.
$$ begin of global - insert your declaration only below this line -
TABLES: /bi0/tpur_group.
DATA: it_tab LIKE /bi0/tpur_group OCCURS 0 WITH HEADER LINE.
$$ end of global - insert your declaration only before this line -
FORM compute_data_field
TABLES MONITOR STRUCTURE RSMONITOR "user defined monitoring
USING COMM_STRUCTURE LIKE /BIC/CS8ZPURSCL
 RECORD_NO LIKE SY-TABIX
 RECORD_ALL LIKE SY-TABIX
 SOURCE_SYSTEM LIKE RSUPDSIMULH-LOGSYS
CHANGING RESULT LIKE /BIC/AZPURPO0100-/BIC/ZBUYERNM
 RETURNCODE LIKE SY-SUBRC "Do not use!
 ABORT LIKE SY-SUBRC. "set ABORT <> 0 to cancel update
$$ begin of routine - insert your code only below this line -
fill the internal table "MONITOR", to make monitor entries
READ TABLE it_tab WITH KEY pur_group = COMM_STRUCTURE-pur_group.
result value of the routine
IF sy-subrc EQ 0.
 RESULT = it_tab-txtsh.
ELSE.
 CLEAR RESULT.
ENDIF.
if abort is not equal zero, the update process will be canceled
ABORT = 0.
$$ end of routine - insert your code only before this line -

Adding anchors - Is it a bug in DW?

Two issues with DW's Insert -> Hyperlink window:
1. Say, I have the following HTML:
This is some italicized text
and I want to make the phrase "some italicized text" to be wrapped in an anchor tag. I select it first in the Design view and go to the menu -> Insert -> Hyperlink (well, there's actually a button on a toolbar). When the Hyperlink window opens up the Text field will be blank and if I continue adding my link here's what I'm gonna get:
This is some italicized text<a href="123.htm">123.htm</a>
Which is completely NOT what I was hoping to get. Again, I needed to wrap the <a> link around my text.
Note that if the tag wasn't there, the Hyperlink window would've wrapped the anchor tag correctly. This behavior manifests itself with other tags as well and not only with the tag.
2. Second issue is with the actual opening of the Hyperlink window. One of my pages has quite a few what Microsoft used to call Bookmarks. I don't know what they call them in DW -- tags like <a name="bookmark">. So what happens is that the Hyperlink window "hangs up" the DW process for about 2-3 seconds before I can actually begin doing anything with it. This could be quite annoying while trying to add more than an a single link.
So my question is, are these two bugs in the DW?

Which DW are you using?
When the Hyperlink window opens up the Text field will be blank
If I follow your steps up to this point, the hyperlink dialog opens with that text field already populated with the text I selected in Design view. You can also insert hyperlinks by selecting the desired text in Design view and using the Link field in the Property inspector to either enter your target or to browse to your target file using the browse function.
So - I am not able to reproduce your finding in DWCS5. The Hyperlink function appears to work as expected for me.
2. Second issue is with the actual opening of the Hyperlink window. One of my pages has quite a few what Microsoft used to call Bookmarks. I don't know what they call them in DW -- tags like <a name="bookmark">. So what happens is that the Hyperlink window "hangs up" the DW process for about 2-3 seconds before I can actually begin doing anything with it. This could be quite annoying while trying to add more than an a single link.
These links are called named anchors. I have not seen a problem on such pages, but then I don't ever use that Hyperlink dialog preferring to use the Property inspector method I described above.

"Adding Location Based Services to Your Application" help me

Hi all
In the OBE tutorial " Adding Location Based Services to Your Application" has:
"Enter Wireless for Library Name. Set the classpath to include the wireless.jar from your installation. For example, C:\midtier_pw\wireless\lib\wireless.jar. Click OK.
The new library should now appear in your Selected Libraries list. Click OK to close the Properties window. "
But i don't know where the Wireless.jar file is. Please tell me
thanks
[email protected]

help me to perform adding WEB Services as described bellow:
Hello,
It depends a Little bit on the used Visual Studio Version. Basically do a right-mouse click on "References" and select
The next steps are a Little bit hidden & confusing: In the next Dialog click on "Advanced..", then add "Web reference" and here you can enter the URL for SSRS SOAP, click on the green arrow and the WSDL data will be retrieved &
shown in the Dialog:
Olaf Helper
[ Blog] [ Xing] [ MVP]

HT2905 I have lost all my play lists from my itumes library, and all of a sudden i have 2/3/4 duplicates of the same song. when i look at when they were added it says all added on 11th March 2013! i added most of them years ago. please help?!!

All my plat list have vanished, and all of my library has been duplicated and triplicated and some have 4 copies. i looked to try and delete the copied ones and tried to delete by putting on when they had been added. the date came up 11th march 2013 for ALL of the songs!. my library is at least 4 years old, and i constantly add songs. so why would it come up that date? and why have all my play list dissapeared?(I think also on that date) please help?

Empty/corrupt library after upgrade/crash
Hopefully it's not been too long since you last upgraded iTunes, in fact if you get an empty/incomplete library immediately after upgrading then with the following steps you shouldn't lose a thing or need to do any further housekeeping. Note that in iTunes 11 an "empty" library may show your past purchases with links to stream or download them.
In the Previous iTunes Libraries folder should be a number of dated iTunes Library files. Take the most recent of these and copy it into the iTunes folder. Rename iTunes Library.itl as iTunes Library (Corrupt).itl and then rename the restored file as iTunes Library.itl. Start iTunes. Should all be good, bar any recent additions to or deletions from your library.
Alternatively, depending on exactly when and why the library went missing, there may be a more recent .tmp file in the main iTunes folder that can be renamed as iTunes Library.itl to restore the library to a recent state.
See iTunes Folder Watch for a tool to catch up with any changes since the backup file was created.
When you get it all working make a backup!
Should you be in the unfortunate position where you are no longer able to access your original library, or a backup of it, then see Recover your iTunes library from your iPod or iOS device.
I've noticed more of these missing library posts of late and a common factor since I started asking is AVG Anti-Virus. It seems it might be at least part of the reason why the library file disappears. Try excluding the iTunes folder from any real-time scanning process.
Reverting to an earlier version of your library may clean up the duplicates issue along with restoring the original date added values. If you still have real duplicates I have a tool that might be able to help...
tt2

PC resets when adding Vid/Mov to Itunes on Nano3g, Help please

Hello,
Just bought a Nano3g 8gig, I dont know why but everytime i try adding Movie/video files from my PC to Itunes my computer comes up with an error, sometimes reseting the computer also. I dont know whats wrong
Please help, Thankyou
biLLy ~

What is showing on the screen of the iPhone?
Does iTunes say the iPhone is in recovery mode?

Adding anchor is adding a 'sub-layer' ! help!

Similar Messages

Maybe you are looking for