Adding another filter to User Name is Prompted

I am trying to add an additional filter to a dashboard report that uses User Name is Prompted. I would also like to display opportunities that have the user's last name in the Opportunity Name field. It should not be the current user's name, it needs to be the same name as the Is Prompted Name.
Any suggestions?

Hi Prakash,
it's only since some minutes )
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/library/kmc/implementing resource list filters for flexible ui navigation/index.htm
Regards,
Thilo

Similar Messages

User name password prompt is not working

Hi Experts,
I have a screen in a BSP application in which , I have two links.
These two links are the links to the screens of a different BSP application for which default username password is not set.
But when I clicked the first link its prompting for the user name and password but its not happening for the second link.
Its also vice versa.
I checked the below link which explains about the way password details are prompt but I am not sure of how to handle this and have the prompt for username and password for both the links.
http://help.sap.com/SAPHELP_470/Helpdata/EN/5a/f8b53a364e0e5fe10000000a11405a/frameset.htm
Your inputs will be helpful.
Regards,
Gopal

Hi,
this sounds a case for Single Sign On, especially if you´re calling your 3 applications from the Enterprise Portal. You have to talked to your administrators for EP and SAP, since it is a complicated task.
Try this link for more about the user and this link for SSO.
after entering username and password for the first time, somehow the information remains alive event when you close your BSP application and call another one. This is a very bad security case if you´re moving your applications into production.

Windows Security user name/password prompt when trying to remote access personal cloud storage device

I have 2TB WD Book Live drive setup at home and is working fine, including remote accessing by internet. However using a colleague's computer at the office recently, her computer would always prompt me for Windows Security username and password. I've tried
keying her admin user name/password and well as the router's admin/admin combinations and still doesn't allow me to access the cloud drive properly. However I have had no problem accessing the same drive remotely using other colleagues computers.
The exact message prompt as follows: Windows Security. The server 192.168.1.1 is asking for your user name and password. The server reports that it is from index.htm. WARNING: Your user name and password will be sent using basic authentication on
a connection that isn't secure.
Please help me understand the problem and its solution. Thank you.

Hi,
The IP address 192.168.1.1 is your Router server address, isn't it? I doubt there should some limition in your colleague's system. Please check it. Also you can try to disable security software for test to access your cloud.
The problem isn't your cloud server Authorization.
Roger Lu
TechNet Community Support

How to read the data from a file in another computer with user name and password login

How to read read the data from a file in anohter computer which need to login with user name and password?

duplicate post: http://forums.ni.com/t5/LabVIEW/log-on-the-other-computer-with-user-name-and-password/m-p/2061478
duplicate post: http://forums.ni.com/t5/LabVIEW/do-need-to-enter-the-user-name-and-password-when-TCP-ip/m-p/2061612
duplicate post http://forums.ni.com/t5/LabVIEW/log-on-the-other-computer-with-user-name-and-password/m-p/2060682

Need BADI to filter the User Names in Approval Tab

Hi All,
In the PO Approval Preview, I need to validate the user names before getting displayed when the user clicks the button 'Find'.
Could any one specify the correct BADI.

Hi,
You can use BADI BBP_CHNG_AGNT_GET .
See the foll related threads;
Re: Replacing approver
Re: SRM: Add approver - restriction of the selectable agents
BR,
Disha.
Pls reward points for useful answers.

Adding 'All' filter in Obiee 11g dashboard prompt

Hi All,
I am using ver 11.1.1.5
My requirement is to see all data in dashboard prompt as well as there should be another item its 'ALL' which return the all data.
Example:
There is a dashboard filter on a field type (like: Value1,Value2) , our client want to see the data on filter (like: ALL,Value1,Value2) the ALL will filter the boat Value1and Value2.
Please explain with steps.

You have to go with SQL Results in the prompt something like below.
The 2nd statement can be other way so that its return all values..
Make sure that similar you have in report too so that you get all values for ALL
SELECT COL1 FROM "SA"
Union
SELECT CASE WHEN COL1 IS NOT NULL THEN 'ALL' ELSE COL1 END FROM "SA"
instead of not null you may go for like '%'
if helps mark

Can't Connect ASDM and Console Forces User Name: & Password: Prompts

After pulling a brand new ASA 5515 out of the box this morning, I spent countless hours scratching my head wondering why:
1. I cannot establish an HTTPS connection to the Management port - https://192.168.1.1/admin
2. When connecting via the console port I get prompted with a username and password sequence that I don't know
I get an SSL Version Error message when I try to connect with any browser. although I did find a way to resolve it, it requires a console port connection which is not working either.
This is not my typical experience with the console or ASDM port setup. What is going on? Any help from anyone would be so appreciated.
Thank you,
Richard

Hmm,
To my understanding Console connection on a fresh unit shouldnt ask for a username and it shouldnt even have an enable password (should be able to leave it blank and press enter). Or atleast that is how I remember it.
I am not sure if the new ASA5500-X models are different.
I think on when using ssh (or was it telnet) without username configured required you to use username pix and password cisco to log in.
- Jouni

HT4623 How can I chance Apple ID user name?

I deleted my old e-mail account and that was my Apple ID user name.
I created another Apple ID user name with the current e-mail account I have. Fine!
The thing is... I am trying to reset my IPhone 4 and it shows me my older user name and not the current one. Ok! I use the same password for both... BUT it says that my password or ID are incorrect. That means I am not able to reset it.
I already changed my Apple ID on my cellphone, but everytime I try to reset it, it still shows the old one.
Please... Somebody help me!

To change the iCloud ID you have to go to Settings>iCloud, tap Delete Account, provide the password for the old ID when prompted to turn off Find My iPhone, then sign back in with the ID you wish to use.
If you don't know the password for your old ID, or if it isn't accepted, go to https://appleid.apple.com, click Manage my Apple ID and sign in with your current iCloud ID. Click edit next to the primary email account, change it back to your old email address and save the change. Then edit the name of the account to change it back to your old email address. You can now use your current password to turn off Find My iPhone on your device, even though it prompts you for the password for your old account ID. Then save any photo stream photos that you wish to keep to your camera roll. When finished go to Settings>iCloud, tap Delete Account and choose Delete from My iDevice when prompted (your iCloud data will still be in iCloud). Next, go back to https://appleid.apple.com and change your primary email address and iCloud ID name back to the way it was. Now you can go to Settings>iCloud and sign in with your current iCloud ID and password.

Adding more than 1500 users over a livecycle policy

hi,
how can i add more than 1500 Active directory users all at once and grant them permissions over a livecycle policy, i want to do that as i have an issue with active directory group, so untill we figure out the issue with the groups i need to be able to add them manually
i have tried adding simi columns between users names but didnt work, so is there any script or a method we can achive this?
i have Adobe Livecycle ES4
appreciate your earlist response.

Hello ,
The BADI LE_SHP_TAB_CUST_OVER is Single use and hence we cant have multiple implementations fr the same ...
If you want to have two tabls try to implement with in the single implementation by providing different OK_Codes for each tab .....hope it will work
Regards,

HT204053 i RECENTLY PURCHASED ANOTHER IPHONE. MY INTERNET IS NOT WORKING. I JUST CREATED AN APPLE ID. WHAT'S NEXT? I NOW HAVE TWO DIFFERENT ACCOUNTS WITH DIFFERENT USER NAMES. HOW CAN I USE ONLY ONE ACCOUNT FOR ITUNES, ICLOUD APPLE ID ETC???

I RECENTLY PURCHASED ANOTHER IPHONE. MY INTERNET IS NOT WORKING. I JUST CREATED AN APPLE ID. WHAT'S NEXT? I NOW HAVE TWO DIFFERENT ACCOUNTS WITH DIFFERENT USER NAMES. HOW CAN I USE ONLY ONE ACCOUNT FOR ITUNES, ICLOUD APPLE ID ETC???

Welcome to the Apple community.
iTunes and iCloud and different accounts, you will need to delete both accounts from your device before adding the new details in their place.
For iCloud go to settings > iCloud, scroll down and hit the delete button. You can then sign back in using your correct details. For iTunes go to settings >store, tap your account ID and then sign out, you can then sign back in using your correct Apple ID.

Initially stating No authorization required using Adobe. When I try to change it so I can transfer downloaded books by my Nook e-reader it I get an error message stating the Adobe user name and password is associated with another computer. What gives?

When I set up Adobe reader on my computer to be able to download books from a library and then transfer to my Nook e-reader, I initially stating No authorization required using Adobe. When I try to change it so I can transfer downloaded books by my Nook e-reader it I get an error message stating the Adobe user name and password is associated with another computer. What gives?

This is pretty surprising and wierd that even Reader 10.1.1 is crashing on your system. It works pefectly for me.
Would it be possible for you to get the crash dump, and upload it, so that I can have a look at the same.
Download PROCDUMP from <http://technet.microsoft.com/en-us/sysinternals/dd996900.aspx> and extract it to a folder, say, c:\temp\procdump.exe
Open cmd prompt and type "cd c:\temp".
Launch the browser and open the PDF.
Open task manager, sort processed by name. Two AcroRd32.exe instances should have been launched. Note the PID (a small integer like 5588) corresponding to the AcroRd32.exe with the higher memory usage; this is the process that must be crashing. Note this PID.
On the cmd window, type "procdump -e -ma 5588 c:\temp\01.dmp" (replace 5588 with the actual PID of the process noted in Step 4). Procdump will now wait for the aoolication to crash. If it throws a EULA, accept it.
Perform your steps to cause the crash.
Procdump will have created a dump file at "c:\temp\01.dmp". Zip it up (since it will be 100s of MBs otherwise) and share with me.
Thanks in advance for all your help
Ankit

Always prompted for "802.1X Authentication" user name and password

Hi,
Just had the logic board replaced in my Macbook Pro, but that's an different story...
The most recent side effect of this is that I am always prompted for my password/user name when I connect to the wireless network at work.
Obviously, I enter the name and password. However, I didn't used to have to do this. In other words, it's not being saved.
Any suggestions on what I can do so it's saved again?
The Network preference panel reports:
Authenticated via PEAP (Inner Protocol:GTC)
The 802.1X pane shows I have 1 'User Profiles':
WPA:<network>
Which has:
my name
a password
Authentications enabled:
PEAP
TTLS
EAP-FAST

Hi,
it might have something to do with your logic board exchange. Your MAC address (Media Access Control, Ethernet-ID, AirPort-ID, Hardware Address or what you want to call it) has changed. Every network interface has a distinct address which looks like that: 01:23:45:ab:cd:ef
I would ask your company's admin first if it has something to with you having a new MAC address.
Alternatively you could try to remove the wlan from Sys Prefs/Network/AirPort/Options/Preferred Networks. Also remove any saved passwords of this network from your keychain and then try adding it again with the remember-checkbox on.
Björn

How do you do a quick transfer of data from one TX to another TX with different user name

I have more than one TX and want to keep most of the information, addresses, media, calendar as well as third party software the same on all my TX's. Is there a way to do this without the long hassle of exporting all that can be exported, and then importing it into each TX. Then adding all the third party software again? I have a new TX and remember how long this takes, so I am hoping for a faster method. I already know how to do a transfer if using the same user name, but this won't work when each will have a different user name in order to hotsync.
This may be a different question. All the TXs will be used and will sync to the same computer via USB, and all are on the Palm Desktop. I want to use them interchangeably. I would also like to keep the information current on all of them, as I now must copy paste any new info (ex. new address) into each via either palm desktop, or beaming to the others. Often this leads to discrepancies of the data between the different TXs.
Post relates to: Palm TX
Message Edited by Silfox on 06-22-2009 09:03 AM

You might look into a program called "SyncUs" from an author in the UK. It will keep all the PIM data synced between two Palm OS units.
WyreNut
I am a Volunteer here, not employed by HP.
You too can become an HP Expert! Details HERE!
If my post has helped you, click the Kudos Thumbs up!
If it solved your issue, Click the "Accept as Solution" button so others can benefit from the question you asked!

Firefox seems to be prompting me w/ potential email address when i have to put in one for a user name, i don't know how to delete those and stop it...thanks for the help

Every time a box pops up in any kind of site where I have to fill in a user name or password, Firefox tries to prompt me w/ old email address and emails. I don't want that to happen and don't want those email shown...how do I delete those and keep that from happening?

Hi Irene,
You should always pay attention when installing software because often, a software installer includes optional installs, such as this adware. Be very careful what you agree to install. 
Adware gets on your computer after you have installed a freeware software (video recording/streaming, download-managers or PDF creators) that had bundled into their installation this browser hijacker.
You can use the below steps to revert back to adware-less Firefox.
1) Reset Prefs
*Navigate to '''about:config''' in your Address Bar
*Press the "I'll be careful, I promise!" button to proceed
*Search for trovi and reset all prefs that pull up by right clicking > Reset
2) Remove any programs that you don't recognize or remember installing from your Control Panel (Start > Control Panel > Uninstall a Program)
3) Remove any extensions that you don't recognize or remember installing from Firefox.
*Firefox 29 and above:(Press the menu button ([[Image:new fx menu]] > Add-ons > Extensions)
*Firefox 28 and below:[[Image:Firefox Button]]> Add-ons > Extensions)
4) Download ADW Cleaner to wipe out any remnants of the adware.
*http://www.bleepingcomputer.com/download/adwcleaner/

How do I change an existing user account to another user name?

I am trying to change the username on an existing Thunderbird email account to another user name. I have the name changed and can send email out from it. However, you cannot treply back to the email, you get an error message saying that the address does not exist. Nor can you receive an email sent directly to the account with the changed name.
Thank you,
Judy Pfeffer

Is the new username an established email account with an email provider? If not, that is your problem. You cannot just make up a username and expect to receive email with it.
I would not suggest changing usernames due to a new email account. I would set up a new account in Thunderbird for the new email account.

Adding another filter to User Name is Prompted

Similar Messages

Maybe you are looking for