Adding aperture versions to iphoto

Since Aperture 2 no longer works with Yosemite upgrade. Is it possible to take the edited photos (versions) from Aperture and bring them into iPhoto?

I was afraid of that.
If I copy the Aperture library to my old macbook pro running snow leopard, I could them export them from Aperture 2 on there and then transfer back as jpgs to computer running Yosemite, correct?
Thanks.

Similar Messages

  • Aperture 3 thinks my iPhoto library is from an older version of iPhoto

    I tried to import my iPhoto library, but when I try it says "Importing libraries from versions earlier than iPhoto 7.1.5 is not supported. Please upgrade your iPhoto library with iPhoto 7.1.5 or later." I'm using the newest version of iPhoto. Any clues?

    I was having this same issue. When importing, Finder defaults to the Pictures folder where my iPhoto Library is found; however, I had to highlight it before clicking import to bypass this error. I'm not sure what else Aperture was looking at in that folder. I've never owned iPhoto earlier than the '09 version so there is nothing remotely related to version 7.

  • Does Aperture 3 have built in PhotoShare/iCloud capabilities or do I need a newer version of iPhoto as well?  I'm running iPhoto '09 and am to scared to switch to the newer version of iPhoto..?

    Does Aperture 3 have built in PhotoShare/iCloud capabilities or do I need a newer version of iPhoto as well?  I'm running iPhoto '09 and am to scared to switch to the newer version of iPhoto..?

    Welcome to the Apple Support Communities
    Both Aperture 3 and iPhoto '11 are compatible with Photo Stream. However, note that the most recent iPhoto '11 and Aperture 3 versions use the same library, so your library will be upgraded, and it doesn't mind if you install iPhoto '11 or Aperture 3. That's why I recommend you to make a backup of your iPhoto library before installing Aperture or upgrading iPhoto

  • Can't open aperture library in iPhoto

    When I try to open my Aperture library (v3.4.4) with iPhoto (v9.4.3), I get the following message and the application quits:
    Aperture library needs to be upgraded.
    To open this Aperture library in iPhoto, it first needs to be upgraded with Aperture 3.3...
    Both iPhoto and Aperture worked properly with a shared library prior to installing the 3.4.4 Aperture update in mid-April 2013. Upon first launch of Aperture after the update, there was a message stating that the library needed to be upgraded. The upgrade completed succesfully, and Aperture has been running properly.
    To remedy the problem, I have tried the following:
    1) Repair Permissions of the Aperture library
    2) Repair Database of the library
    3) Rebuild Database of the library
    4) Opening the iPhoto library with the menu command <Open Library in iPhoto> in Aperture (Same notice to upgrade the library appears)
    My setup is:
    - Latest 27" iMac w/ 3.2GHz Core i5, 16GB RAM
    - OSX 10.8.3
    - Aperture v3.4.4
    - iPhoto v.9.4.3
    - Aperture library is stored in the local hard drive in the Pictures folder
    - iPhoto used to make print products only availble in iPhoto
    I have searched the boards and have noticed people with similar symptoms but not the same circumstances.
    Does anyone have a suggestion or solution?
    Thank you.

    Added:
    Just in case you cannot find a backup of the Aperture Library that has been created with AP 3.4.4, make a current backup of your Aperture library and trash the file "DataModelVersion.plist". Then open your library in Aperture 3.4.4. Aperture creates a new version of this file, at least my experiments showed, that the file can be restored this way.

  • Aperture book for iPhoto user?

    I've been running iPhoto for about 10 years, and the time has long been ripe for me to switch to Aperture.  I'm currently running iPhoto 2009 on an OX 10.6 Mac Pro.  I'd like to switch to Aperture on my Mac Pro, and given that I'm running 10.6 the latest version I can get looks like v3.2. 
    Can anyone recommend a good book for me to get up to speed in Aperture 3, given my iPhoto experience?  I am a fairly advanced user, with a programming background.
    John F
    New York, NY
    ps...
    What I like in iPhoto 2009 that I want to keep:
    Albums (with "folders" and "subfolders") scroll on the left-hand side.  Below the albums list, in the same column, is the optional info box for the selected photo, with the rating, user comments, date taken, etc.  To the right is the photo set for the selected album with resizable thumbnails. iPhoto 2011 inexplicably requires a WHOLE NEW COLUMN just to see comments, photo ranking, and other info for the selected photo which is a maddening waste of screen space.
    What I want to get from Aperture:
    Multiple home directories with a unified view:  Right now, I have one giant 100Gb iPhoto directory with all of my photos in it.  I'd like, instead, to have one directory per year, but have Aperture browse them all as if they were a single unit.
    Portability of photo subsets:  I'd then like the ability to copy just one of these directories to my laptop, and then be able work with that subdirectory in Aperture.

    In addition to Kirby's introduction to the fundamental features of Aperture, a few notes on the transit from iPhoto to Aperture.
    I also have been a long time iPhoto user and really like the added freedom and flexibility that Aperture brings.   But one thing was not so nice - there is no easy transition from iPhoto to Aperture 3.2.4 or earlier, if you want to import your iPhoto libraries as libraries and maintain a lossless workflow.
    I'm currently running iPhoto 2009 on an OX 10.6 Mac Pro.  I'd like to switch to Aperture on my Mac Pro, and given that I'm running 10.6 the latest version I can get looks like v3.2.
    Your transit to Aperture would be much smoother, if you could take the plunge and upgrade to MacOS X 10.7.5 and migrate from iPhoto 9.3.x to Aperture 3.4 .
    The big difference would be, that you could open any iPhoto Library in Aperture and vica versa and could profit from the representation of images and versions as pairs of original master files and virtual versions.  In the iPhoto version you are now running, each edited image is stored twice or more. Each edited verssion will create an new copy of the image file in your iPhoto library. Aperture has always stored only the orginal master and a description of the list of adjustments to render the edited version from the original. You do not duplicate the amount of storage required, when you edit an image, like in the earlier versions of iPhoto? Have you ever been tempted to use iPhoto Diet? With Aperture you can forget such worries.
    If you import your iPhoto '09  library to Aperture, there will be no help but to import each photo twice - the original and the edited version and it will be a waste of diskspace compared to the import in Aperture 3.4 and a lot of work to group these duplicates and to decide what to do about them - redo the edits in Aperture and discard the edited iPhoto version, or what?
    So, if you can, do this from a Lion or Mt.Lion system, if you already have a large iPhoto Library.
    Your wish list:
    iPhoto 2011 inexplicably requires a WHOLE NEW COLUMN just to see comments, photo ranking, and other info for the selected photo which is a maddening waste of screen space.
    In Aperture you have many ways to view the Metadata - hovering HUDs, tabs, overlays on the images;  all is highly customizable.
    Multiple home directories with a unified view:  Right now, I have one giant 100Gb iPhoto directory with all of my photos in it.  I'd like, instead, to have one directory per year, but have Aperture browse them all as if they were a single unit.
    No way. If you want Aperture to browse your photo libraries  as if they were a single unit, it has to be one library. But you have more advanced tools in Aperture to structure your Aperture library than in iPhoto, and Aperture supports huge, distributed Aperture libraries. It works well - my main Aperture library holds all photos I have ever taken plus some more.  See Kirby's explanation above.
    Portability of photo subsets:  I'd then like the ability to copy just one of these directories to my laptop, and then be able work with that subdirectory in Aperture.
    Kirby already explained that.  It is easily done by exporting partial libraries and reimporting.
    Regards
    Léonie

  • Can't open current photo library using this version of iPhoto 7.1.5

    I have recently had to perform a disk repair due to the disk image not mounting. In this process I completed a full backup of my home folder and verify/repair/format of my harddrive. At this time I also added 4G RAM bringing the MacBook up to 5G RAM.
    Since the reinstallation of 10.7.5 (Which took about 18hrs) I have none of the iLife package. I have reinstalled from the original disk that I recieved on initial purchase back in 2008. After installation I ran the software update and have updated everything (iTunes, iPhoto etc) I have been able to import all data from my backup via a simple drag & drop. I am now unable to open my iPhoto library (file size 105.43G). I have searched many forums and have been unable to find a solution that is suitable (rebuild library) because as soon as I launch this option it brings up the following message:
    You can’t open your current photo library using this version of iPhoto. You have made changes to your photo library using a newer version of iPhoto. Please quit and use the latest version of iPhoto.
    After this I must quit the application. What am I missing? I'm sure it is something quite simple... I'm hoping it is as easy as it was to find the recoveryHD during the reformat of the disk.
    Any help would be greatly appreciated, Cheers.

    It sounds like a damaged library. Try the 2 fixes below in order as needed:
    Fix #1
    Launch iPhoto with the Command+Option keys depressed and follow the instructions to rebuild the library. Select the last three options.
    Fix #2
    Rebuild the library using iPhoto Library Manager as follows:
    Using iPhoto Library Manager to Rebuild Your iPhoto Library
    1 -Download iPhoto Library Manager and launch.
    2 -Click on the Add Library button, navigate to your User/Pictures folder and select your iPhoto Library folder.
    3 - Now that the library is listed in the left hand pane of iPLM, click on your library and go to the File->Rebuild Library menu option
    4 - In the next window name the new library and select the location you want it to be placed.
    5 - Click on the Create button.
    Note: This creates a new library based on the LIbraryData.xml file in the library and will recover Events, Albums, keywords, titles and comments but not books, calendars or slideshows. The original library will be untouched for further attempts at fixing or in case the rebuilt library is not satisfactory.

  • It seems that the new version of iPhoto will no longer share photos between computers on the same network. Can anyone confirm this?

    It seems that the new version of iPhoto will no longer share photos between computers on the same network. Can anyone confirm this?

    lovinmymac wrote:
    I have "automatically create previews" in the preferences UNCHECKED. Why is Aperture creating previews? For the screen image?
    You might also need to turn Preview generation off for any existing Projects. Select the Project in the Projects pane and use the cog button at the top of the pane to uncheck 'Maintain Previews For Project'.
    Ian

  • I can only update to OS 10.7.5 and I need to use Photo Stream or a version of iPhoto but not the latest version. How do I get version newer than iPhoto 08?

    Using a Mac Pro desktop which will only update to OS 10.7.5. Have iPhoto 08 but would like to update to iPhoto 11 cannot use the latest version of iPhoto on this computer. Where and how do I get iPhoto 11?

    Minimum Requirements...
    My Photo Stream
    iOS 5.1
    OS X Lion v10.7.5
    iPhoto ’11 (9.2.2) or Aperture 3.2.3
    System requirements for iCloud - Apple Support
    http://www.amazon.com/Apple-MC623Z-A-iLife-VERSION/dp/B003XKRZES
    iLife '11 (retail DVD)
    Apple Special Event on October 20, 2010 (Press Release)
    $49
    10.6.3
    Intel
    9.4.3
    http://en.wikipedia.org/wiki/ILife#iPhoto

  • Books imported from previous version of iPhoto

    We have recently bought a new iMac and installed iLife 09. We imported the iPhoto Library from our old G4 iBook which was iPhoto Version 5.0.4. The import went well, except that this new version of iPhoto has completely different themes for books. SO... whenever we open an old book it comes up with the message "the theme this book was created in is no longer available in this version, please choose a new theme. You may lose some data" or words to that effect. Unfortunately we have spent months creating books that are to be given as portfolios to the parents of the preschool children at the preschool where I work. They include a fair bit of text as well as photos. We have experimented with a few of the themes in iPhoto '09 but they all seem to mess up the layout (adding a dust cover inside flap where the 1st page used to be) and text seems to be missing. Has anyone got any ideas for a solution so we can continue to build these important portfolios to give out at the end of the year. Thanks!

    There is only one way to do this and that's continue to use iPhoto 5.
    Regards
    TD

  • Cannot open iPhoto. I get this command, " you can't open your current photo library using this version of iPhoto.

    I tried downloading iPhoto library manager as suggested by a pervious post, but even with Safari and Firefox it will not download.  The dmg image disappears before I can click on it and I get a command that says "it does not work with this architecture". I'm using a G-5 Power PC Mac running OS 10.5.8.  Any other suggestions? Thanks!

    Likely that is for IntelMacs only.
    If the iPhoto Library was ever "touched" by a later version of iPhoto, then you get the can't open message.
    Create a new photo library
                               Quit iPhoto.                       
                               Hold down the Option key as you open iPhoto.                       
                               In the window that appears, click Create New.                       
                               Type a name and choose a location to store the new photo library.                       
                               Click Save.                           The iPhoto Source list shows your new, empty photo library. Any photos you import are added to this library.                                                      You can switch to another library you’ve created at any time.                       
    http://support.apple.com/kb/PH15263

  • Could I please have feedback on adding Aperture, mainly for organization and storage.

    I have Iphoto and Adobe Photoshop already.  In my iPhoto I have 30K photos.  Could I please have feedback on adding Aperture, mainly for organization and storage.

    You wouldn't be adding it, you'd be replacing iPhoto with it.
    It does all the jobs that iPhoto does, and then some. You'll also find yourself using Photoshop less.
    Regards
    TD

  • How to switch from Aperture 3 to iPhoto 11?

    Hello,
    what is the best method to switch from Aperture 3.x to iPhoto 11?
    I have about 5000 photos grouped by albums an projects in my Aperture library and would like to move them all to iPhoto 11 as I don't need the pro features of Aperture any longer.
    Is it possible to move without loosing meta informations?
    Regards,
    Martin

    There's no best way, there's the only way.
    1. Export all your Masters
    2. Export all your Versions
    You can write the metadata to the files on export - check out the Export presets. Note that you cannot export Faces. There is no convention for sharing Faces. The best you can do is use Faces as a basis for keywording.
    Import them into iPhoto. Note that there is no way to associate the masters with the versions in iPhoto, so you'll have apparent duplicates.
    Regards
    TD

  • Concerned about Aperture backups  vs. iPhoto backups

    Hi All,
    I've just installed Aperture 2.0 and after reading a lot of the posts here regarding the superior way that Aperture handles files compared to iPhoto, I wanted to start using Aperture for everything regarding organizing my photos.
    I have a couple of concerns/questions though...
    1) After importing my iPhoto library into the Aperture library as managed masters, I see that I can't actually access the originals/masters inside the Aperture library via Finder. When I right-click on the Aperture Library and choose Show Package Contents in Finder, I see the albums and events, but I do not see any of the actual photos.
    This concerns me regarding backups... even if I use the Vault feature in Aperture, I wouldn't have access to the actual masters outside of Aperture. If I want to migrate to a different photo cataloging/editing app later, can this be done?
    With iPhoto, I can access the originals when I need to AND they get backed up with Time Capsule or any other system backup.
    2) I've read a lot about Aperture's non-destructive editing being a strength... Isn't this the case with iPhoto as well? In Finder, the iPhoto library contains a folder called "Originals" and one called "Modified"... the Original folder contains the masters and the Modified folder contains copies of the masters to which I've applied edits. Wouldn't this be considered non-destructive as well?
    3) Given these two above points, I'm considering starting over and importing my iPhoto library in Aperture as referenced files. My two concerns here are this:
    a) What are the draw backs, if any, of doing this? Won't I get the same benefits using Aperture with referenced files?
    b) If I add new photos to iPhoto after I've imported the library into Aperture as referenced files, I'm assuming they won't show up in Aperture, right? I guess the alternative is to just open up the iPhoto library in Aperture and not import anything... anything I'd be missing here with regards to Aperture's superiority over iPhoto?
    Thanks so much for any answers and advice. I appreciate it.
    Rick
    Message was edited by: rickdeet
    Message was edited by: rickdeet

    rickdeet
    Welcome to the Apple Discussions.
    1) After importing my iPhoto library into the Aperture library as managed masters, I see that I can't actually access the originals/masters inside the Aperture library via Finder. When I right-click on the Aperture Library and choose Show Package Contents in Finder, I see the albums and events, but I do not see any of the actual photos.
    a: The Library structure of Aperture is quite different. Yes the files are there, but they are inside further packages. Each approject is in itself a further package file, and it contains - among other things - the actual files.
    Now this opens several lines of possibilities. 1: I post a lot on the iPhoto forum and I always advise users to use a Managed Library. iPhoto’s abilities with Referenced Libraries are poor. This is not the case with Aperture. It has very strong abilities with Referenced Libraries, so much so that many folks recommend them as default.
    That said, if you prefer the managed library, then backing up the Library Package does exactly that. Just like iPhoto, you get everything.
    If you want to migrate to a different application, well, frankly the right way to do that is to export the images - same as iPhoto. But that said, if you get inside the Library and then the projects, there are your Original files. Just a single extra layer away.
    2) I've read a lot about Aperture's non-destructive editing being a strength... Isn't this the case with iPhoto as well? In Finder, the iPhoto library contains a folder called "Originals" and one called "Modified"... the Original folder contains the masters and the Modified folder contains copies of the masters to which I've applied edits. Wouldn't this be considered non-destructive as well?
    Yes and no... Aperture works very differently from iPhoto. As you point out, in iPhoto edits are carried out on a copy of the Original and saved as the Modified version. However, this modified version is a generation down - and therefore more compressed - than the Original. That said, with the Non Destructive feature of iPhoto 08 and later, you’re never more than one generation away from the Original +if you edit in iPhoto only.
    Aperture works very differently. There is no Modified Version. When you edit an Original in Aperture your decisions are recorded in the Database and applied to the pic live as you view it. The only time a new file is produced is when you go to use it - email it, print it, whatever...
    Given these two above points, I'm considering starting over and importing my iPhoto library in Aperture as referenced files. My two concerns here are this:
    a) What are the draw backs, if any, of doing this? Won't I get the same benefits using Aperture with referenced files?
    Do you mean “Won’t I get the same benefits using iPhoto with Referenced Files? IF so, the answer is no. And if you ever have to re-attach the masters to a iPhoto Library, then you can set aside the weekend to do a lot of clicking.
    There are no drawbacks with using a Referenced Library in Aperture. If the numbers of photos you process are very large there are distinct advantages to doing so - masters stored on multiple disks for instance.
    b) If I add new photos to iPhoto after I've imported the library into Aperture as referenced files, I'm assuming they won't show up in Aperture, right? I guess the alternative is to just open up the iPhoto library in Aperture and not import anything... anything I'd be missing here with regards to Aperture's superiority over iPhoto?
    Why would you import to iPhoto is you’re using Aperture? A much better workflow would be to import to Aperture and then share the Aperture Previews with iPhoto. But no, the relationship between Aperture and iPhoto is not dynamic. They don’t read each other’s Libraries as they change.
    Aperture’s superiority over iPhoto is down to much better file management controls, much better processing tools with more more fine control over them, much better everything to do with processing photos.
    iPhoto has better slideshows and it has Calendars.
    Regards
    TD

  • Aperture cannot import iPhoto library

    I am unable to import iPhoto library into Aperture.  It complains that the iPhoto version is older than 7.1.5 and thus not supported.  However, I'm working with iPhoto version 9.4.3.
    Any clues how to address this - rather odd...  Just bought the software and have some urgent work to perform with it - so any quick helping advice would be great.
    J

    Jens,
    which version of "Aperture Install Notes" are you referring to? Is your Aperture version the most recent donwload Aperture 3.4.5 from the AppStore? You need at least Aperture 3.3. to be able to share the libraries between iPhoto and Aperture and to use the iPhoto Library as your Aperture library.
    Now, should I re-install Aperture and wipe the "imported library" to make sure I have a clean sharing between iPhoto and Aperture or does it not matter?  I do not want to have double the copies
    It is not necessary to reinstall Aperture, if you want to start over with a new Aperture library. The Aperture Application and the Aperture libraries are completely independent. You can simply trash the current Aperture library (by default it is in your "Pictures" folder and called Aperture Library.aplibrary). Only make sure, that your original iPhoto Library still contains all your photos. When you imported to an earlier version of Aperture, you may have moved your originals from iPhoto to Aperture. That is why I am concerned about your Aperture version.
    Regards
    Léonie

  • Aperture 2 vs Iphoto 8 - importing/deleting etc

    Hi,
    I'm considering upgrading to the new version of Aperture (3.1) from a little used 2.x version. I got excited a while ago, bought it, installed it and uploaded my then iphoto library into it. For some reason, a short time later the new(then, not now) version of iPhoto drew my eye and I never really went back to Aperture.
    However, a few overseas trips (and time to sort photos) later I find that iPhoto doesn't really do it for me anymore, especially having to use tools that affect the entire image.
    I want to play with Aperture 2 for a little while before making the decision to upgrade BUT my old Aperture library still has old image files in it from the first import (which have long been culled from the current iPhoto library).
    My question (finally) is am I able to delete all images in the Aperture library (and basically start over) without affecting my current iPhoto library?
    I believe they are 'referenced' in Aperture and I have not yet consolidated the library.
    Secondly, am I then able to delete the iphoto library (which is taking up significant space on the HD.)
    Clearly I'm pretty vague on the relationship between iphoto and aperture so apologies for the long winded post.
    Thanks,
    Flip.

    Flipper was cool wrote:
    I'm considering upgrading to the new version of Aperture (3.1) from a little used 2.x version.
    Yes, go for the new version - get it from the Apple App Store, it's a good price.
    My question (finally) is am I able to delete all images in the Aperture library (and basically start over) without affecting my current iPhoto library?
    You can delete your Aperture library which is in the Pictures folder. When you next launch Aperture it will prompt you for a new library. At that stage import your iPhoto library.
    Secondly, am I then able to delete the iphoto library (which is taking up significant space on the HD.)
    If you let Aperture copy the photos from iPhoto to Aperture you can then delete the iPhoto library.
    Message was edited by: Jim Calderwood

Maybe you are looking for

  • Is there a way to set up a 'dial string' with a 'wait' function?

    I'm trying to set up calling my work voicemail. On the blackberry i could set up a dial string with a wait function. So when i dialed the voicemail #, once it answered I could hit a button on the phone and it would send the next set of characters (in

  • Changing of  Item category  in bom after being set at once

    how can i changethe item category of item in bom while it has been ones used

  • Delete all notes and highlights at once

    Hi community,  I have a PRS-600 reader and I cannot delete all notes and highlights being accumulated from all books I have read so far.  I read the whole users manual, and there is no "delete all" option.  Thanks a lot for your help,

  • Creat a DLL from a set of VIs

    Hello, I've a board that cames with Labview VIs for each of its functions. As I'd like to use it from CVI, I need a DLL. NI support team gave me the procedure to make such a DLL, it works fine. But, the create DLL can't be used by 2 application in sa

  • We unable to connect to livecache database

    Hi All, We have restored SCM along with Live cache successfully. After restore we are unable to connect live cache to R3.... our source system versions are NW 2004s R2 and live cache version is 7.6.04.09 We didn't find the same version software in th