Adding Attribute with C1 for the DAP object fails.

Question

Hi Forums
I'm trying to set up the NMAS and Novell Radius with the Vasco Method on a
NetWare 6.5 - SP2 server
According to this
http://support.novell.com/cgi-bin/se...?/10080783.htm
everything works
fine until i get to this point 3(below), within the TID:
================================================== =
Adding an Attribute to the RADIUS Dial Access Profile (DAP) Object
1 Start ConsoleOne.
2 Double-click the DAP object.
3 On the Attributes tab, click Add.
4 Select the Novell eDirectory Name attribute.
5 Check the box next to Novell eDirectory attribute.
6 Select FDN (Fully Distinguished Name).
IMPORTANT: It is critical that you select FDN so that name resolution will
work properly. Otherwise, the users who use this profile will get a 403 User
Name Mismatch error when they try to access Web pages.
7 Click OK > OK.
================================================== =
Then it fails and it seems like the "ADD" button within C1 does not work at
all, i.e. nothing happens.!!!
I'm running the default C1 that is with NW 6.5 - SP2.
I did the install of Radius stuff from the "iChain 2.3 -SP1 Auth CD", not
really sure wether or not that is good.
but anyway thats where i'm going to use it in the end.
Any ideas would be great.
- Michael

Answer 1

Hi Forums
Seems like this TID 10084333 solved my problem.!
but only when i did update my local C:\novell\......... C1.
Cheerrs
- Michael
"Michael" <[email protected]> skrev i en meddelelse
news:kJvMd.137$[email protected]..
> Hi Forums
>
> I'm trying to set up the NMAS and Novell Radius with the Vasco Method on a
> NetWare 6.5 - SP2 server
> According to this
> http://support.novell.com/cgi-bin/se...?/10080783.htm
> everything works
> fine until i get to this point 3(below), within the TID:
>
> ================================================== =
> Adding an Attribute to the RADIUS Dial Access Profile (DAP) Object
> 1 Start ConsoleOne.
> 2 Double-click the DAP object.
> 3 On the Attributes tab, click Add.
> 4 Select the Novell eDirectory Name attribute.
> 5 Check the box next to Novell eDirectory attribute.
> 6 Select FDN (Fully Distinguished Name).
> IMPORTANT: It is critical that you select FDN so that name resolution will
> work properly. Otherwise, the users who use this profile will get a 403
> User Name Mismatch error when they try to access Web pages.
> 7 Click OK > OK.
>
> ================================================== =
>
> Then it fails and it seems like the "ADD" button within C1 does not work
> at all, i.e. nothing happens.!!!
> I'm running the default C1 that is with NW 6.5 - SP2.
>
> I did the install of Radius stuff from the "iChain 2.3 -SP1 Auth CD", not
> really sure wether or not that is good.
> but anyway thats where i'm going to use it in the end.
>
> Any ideas would be great.
> - Michael
>
>