Adding attributes to an infoobject with a reference char.

Hello experts,
We want to add some new attributes to our custom infoobject that was created with reference char. = 0CUSTOMER.
Is this possible? These new fields will be populated from R3, will the user exit for master data, EXIT_SAPLRSAP_002, need to be enhanced for datasource 0CUSTOMER_ATTR?
Thanks in advance,
Inma

Hi inma moya,
You can not enhance any reference characteristics, as this characteristics takes reference table of source tables(0customer) only.
If you want to enhance these characteristics, you need to enhance 0CUSTOMER ONLY.
Then enhance objects will be automatically reflected into reference objects.
Hope it Helps
Srini
[Dont forget to close the call by assigning poings.... - Food for Points: Make a Difference through Community Contribution!|https://www.sdn.sap.com/irj/sdn/index?rid=/webcontent/uuid/007928c5-c4ef-2a10-d9a3-8109ae621a82]

Similar Messages

SAP BW 7.3: RSTRAN018 after adding attribute to an infoobject

Hello,
i added an attribute to an infoobject and tried to activate this. In the log messages i received the message RSTRAN018 "Generation status of transformation XY will be reset".
I never got this message in SAP BW 7.0. Is this just a kind of information (new in Release BW 7.3) which can be ignored or does it has an impact on the transformation in which the infoobject ist used (e.g. inactivation of the transformation)?
In general the adding of an attribute to an infoobject shouldn't affect the transformations in which the infoobject is used.
Thank you in advance.
Kind regards,
Andreas

Hello,
You are correct this text is added to BW 7.30 (onwards I guess). The message is purely for Information purposes and the transformation should not be deactivated and will remain active/usable. This was confimed by SAP dev.
Regards,
Michael

Cumulative value with Agg. reference char.

hi,
If you go to the display of the key figure, in the second tab Aggregation, how should we use Agg. reference char with Cumulative value radio button checked.
I read SAP help but could not get it.Please explain with examples.
Thanks in advance.

Hi
Aggregation :
This flied is the standard aggregation with three options - Min,Max,Sum
Exception Aggregation :
This field determines how the KF is aggregated in the BEx in relation to the
exception characteristic.
The key figure Number of Employees can be aggregated using the ref .characteristic Cost Center (Non-time characteristic).
Here you would determine a time characteristic as an exception characteristic with, for example, the aggregation last value.
For Non Cumulative values:
If you want to aggregate the KF value in business explorer using the non time characteristics like 0person.... then your standard aggrgation field should have summation value
and if you want to aggregate the KF value in the business explorer using the time char.
like 0calmonth, then your exception aggregation field should have last,average.... values (not equal to summation)
Assign points if helpful.
Thanks

Imposible to activate characteristic with one reference attribute in 3.5

Dear Experts,
I have a really strange problem in 3.5 version.
I have ZUTSUP attribute like reference char from 0FUNCT_LOC.
I deleted one Z Character Attribute from 0FUNCT_LOC, when I try to active it shows one error.
"Characteristic 0FUNCT_LOC: Master data has to be activated before conversion"
Ok, I go to "Note 451773" trying to activate master data. Like explains this post: "Unable to Activate master Data InfoObject ''0EQUIPMENT''
But, when i try to reactivate active version... another error
"Characteristic 0FUNCT_LOC: Navigation attribute ZCIRCUITO does not exist for char. ZUTSUP"
Well.. this is a bucle, because, in referenced attribute I don't have navigation attribute ZCIRCUITO. and I can't modify it. I tried to reactive ZUTSUP (without ZUTSUP) but problem is...
"Characteristic ZUTSUP: Referenced characteristic 0FUNCT_LOC not (actively) available"
Well... Any Idea?
Thank you!

Very easy if you know...
Create another time the same attribute with same parameters and active it. Then Acitve Data Master of InfoObject.
That's all, now you can delete the attribute normally.
Edited by: Roger Peruchet on Mar 1, 2010 5:56 PM

Compounding infoobjects with reference

Good morning, experts!
I have created infoobject B as a reference of infoobject A. Now I decided that both have to be system-dependent, I mean, both have to be compounded with source system ID.
When I try to do this, I reach a deadlock.
When I try to change infoobject A, I get a message that I can save but I can't activate the object because of the references. The same happens when I try to change infoobject B.
Right now I have the modified versions with the compounding, but I can't activate either.
Is there anything I can do to activate both infoobjects with the compounding? Or I'll have to delete all references and create them again?
Thank you very much,
Isabela.

What u can do is that u can delete the data if there is any from the Infoobject A using SE14.. for P table and then check assigning the compounding attribute to it.. I hope this shud go thru this time.
and then activate the object.
Thanks
Do let us know after this is carried out..!!

Adding Attribute to an Existing Infoobject

Hi All,
I Had a Info object characteristic ZXXX with relavent data in one cube BCSCUBE.
I want to reuse this Infoobject characteristic to built another Cube BPSCUBE with the same data in ZXXX and additional I want to add an attribute to this Infoobject charactersitc. How is this possible.
if I define a new infoobject ZYYY with TEMPLATE property I m not able to get the same values in ZXXX and
if I define a new infoobject ZYYY as REFERENCE I am not able to define the Attribute to this.
Clarify>>ASAP
Sunitha.

Hi Sunitha,
you are right - reference means using the existing InfoObjects and its master data without any changes. Template means you can change whatever you want, but you will have to load master data for the new InfoObject.
If you need to add an attribute that has master data tables with texts and so on I think you will have to create new InfoObject using template approach.
Best regards,
Björn

BOR/SWO1: only Attributs with DDIC reference are displayed

Hi everybody,
when I test my BOR object in SWO1, only attributes with DDIC reference are listet.
I designed one virtual attribut. Why is this not display in test mode?
Many Thanks
Regards mario
Mario Müller
null

Hi,
in reports the language of the picklists corresponds always to the company default language.
The only solution I now (its really static and not so nice):
Create one report per language and change the picklist field by using CASE statements...you see its hard to refresh if you have lots of values :)
cheers
Myriam

Currency Translation not working with "Time Reference from Variable"

We have created several Currency Translations using RSCUR with a fixed "Key Date". All have been working fine until we got the request to allow a variable date for the exchange rate date. I have built a variable on 0DATE which I am putting a default date value into using user exit. This default date is the SAME date as the fixed "Key Date" which we have been using. Unfortunately when we use the "Time Reference from Variable" option and use this new variable, no currency conversion is taking place, instead it only shows the original currency values. I am 100% sure that my variable is getting a value and it is the same date we are using for the fixed "Key Date" value so both methods should be using the exact same exchange rates. The documentation that I can find states:
●      Time reference: The time reference for the currency translation can be either fixed or variable.
If the time reference is fixed, the time at which the exchange rate is determined is independent of the data. You have the following options:
○       You can establish that the time reference be determined upon translation.
○       You can select the current date.
○       You can specify a fixed date as the key date.
○       You can specify any variable that exists for InfoObject 0DATE.
○       You can establish that the query key date be used. This is determined in the query settings.
In my case I am only switching from option "You can specify a fixed date as the key date"=(Key Date) to "You can specify any variable that exists for InfoObject 0DATE"=(Time Reference from Variable).
What am I missing? Any help is appreciated.

I neglected to mention that we are calling this currency translation through a WAD button using the SET_CURRENCY_TRANSLATION command. I did do a test by applying the currency conversion within query key figure. This seems to work. So it appears the issue is with how the WAD is processing the variable, not the query. When I display the variable in a drop down item within the WAD it does have the default value that I have assigned in user exit.

Error when Refresh Planning after adding attribute V9.2.1

Has anyone encountered this and what is the solution:
Added new attribute dimension in planning web and added attribute members. When I try to do incremental or full refresh, receive error message:
Errors detected (AssocAttrDimension, 1060057) Could not associate attribute with member (attribute,member) Decanatura, Career -2147218881
Career is the dimension and Decanatura is the attribute added
Using 9.2.1
Thanks
Jeff

Hi Jeff,
please find some findings from planning DBAG which may be useful to resolve your issue:
You can assign attributes only to sparse dimensions.
You cannot assign attributes to label-only members.
After you create attributes and attribute values, you can assign attribute values to each member of the dimension.
You must assign attribute values to dimension members at the same member level within a dimension.
You can define attribute values for Entity, user-defined custom dimensions, and Account
members if the Account dimension is designated as a sparse dimension in all plan types. You
can then assign attribute values to members of a dimension.
Attribute values for an attribute must be assigned to the same-level sparse dimension members.
Assigning an attribute value to another level causes an error during the application refresh.
hope this helps.
www.dornakal.blogspot.com
Edited by: Dornakal on May 28, 2009 5:55 AM

How to create an infoobject with a flag kind of data?

Hi Everyone,
How do you create an infoobject with a flag kind of data? Like YES or NO.
Will it have Master Data or just the Text?
It will not have any hierarchy or anymore attributes?
Should I select the DataType as CHAR or something else?
Thanks

Pl check the following objects from the contens:
1. 0ACCDEBCRED
2. 0ABCKEY
Ravi Thothadri

Selection for infoobject with TEXT

Hi All,
I have an infoobject ZCustomer which is having a navigational attribute 'ZROLE' which may have concatenated text value. eg., LOC_INT or INT or LOC_PIC.
Now i have to keep selection/filter to the report where user should have a selection option/drop down with values 'LOC', 'INT' and 'PIC'. If the user select the value 'INT' then i should show the report for only 'LOC_INT' and 'INT'.
To say shortly its like contains pattern in the abap.
so for the above user selection, which ever the customer's attribute value has the string INT only should be dispalyed in the report.
Note: I can use WAD reports if needed. The list of values 'LOC', 'INT' and 'PIC' can be the static list we maintatin for the user to select. bcoz i dont have any particular infoobject with these values.
Thanks in advance
Karthik

Hi Karthik,
You can use the standard selection option variable and ask the users to enter the wild character before and after the input value.
For example, if the user enters 'INT' , then report output would show all values which has 'INT'.
However, the users would be seeing all the values in the master data or posted values in the transaction data ( as per the setting ) and not customised values as per your requirement.
Thanks,
Krishnan R.

Does BOXI support crystal reports with parameter references in formulas?

I am designing a report in Crystal Reports XI Developer that contains parameters, which are passed to a stored procedure and are also used within formulas ( in Crystal Syntax ie. {?FORMAT_ID} ) in the report itself.
I can run the report successfully in CRXI Developer. The formulas use the correct values from the parameters entered during execution and everything looks good.
I then deploy the report to Business Objects Enterprise XI. I do all of the things necessary to manage the report including setting up the proper database connection information and default parameter values.
When I run the report using the Crystal Report Viewer, I get the following error message:
Error in File Forecasting.rpt:
Error in formula <Report Format>.
'if (not isNull({?FORMAT_ID} ) ) then
This field name is not known.
Details: errorKind
This happens when I press the "Preview" button in the Manage Object dialog from Crystal or when I run the report using InfoView.
I have changed the formulas and it doesn't seem to matter what the specific content of the formula is; other than the existence of a parameter reference in the formula. If I comment out the parameter and replace it with a hard-coded value, it gets through the formula fine.
Does Business Objects Enterprise XI support crystal reports with parameter references in the formulas?
Thanks,
Tim H.

Hi,
In Crystal Reports under File -> Report Options >check convert Null Values to default > Verify on first refresh > Verify stored procedures on first refresh.
This corrected the issue by allowing the query engine time to locate those columns and map them to the query being sent by the report.
The convert null values was added because those field were being used in the record selection and grouping.
Regards,
Vinay

Navigational attribute Vs normal infoobject in Query

Hi
I have some infoobjects named ..1)ITEM....2)STATUS....3)SALES etc in cubes...
I have to design a query showing this data...the report should show Item Status also...I can use normal infoobject STATUS from infocube in report to show Item Status....I have one more possibilitySTATUS is added as navigational attribute of infoobject ITEM..So I can use this navigational attribute also..which one should I use normal infoobject STATUS or navigational attribute STATUS of infoobject ITEM to show item status in report?how to decide on this?
Thanks for your guidance.

Hi Hayward,
Status as direct Object
When you use Status as an object added in cube you get the data of the day the cube was loaded. Let say for example your cube is loaded weekely on sundays, so the field status will give status as on sunday, even when it is run on other subsequent days of the week. So as correctly pointed in above posts values you get in status are not real time but historical.
Status as Navigational Attr of Item
When you use Status as Navigational attribute of Item then you get current data because in almost all cases Master Data Objects are loaded on daily basis and thus it picks the latetst Status of Items.
In case your cube is loaded daily then it won't make much difference that whether you are using it as a standalone object or as navigational attribute of Item.
Hope it helped
Regards
Raj Rai

Document attribute ticked on InfoObject which is nav attribute

Hi SDN Community,
We have recently enhanced a query, by removing a natural characteristic Cost Centre Category ZCOBCAT that exists in an infocube, and replaced this with a characteristic which is a navigational attribute - CC Func Code ZCCFUNCCD.
eg. characteristic value with was CC11 is now 11 with this change
On both these characteristics, in the infoObject properties, the "Document attribute" checkbox is ticked.
However, we find that when storing commentary functionality, the comments are applicable against the whole infoObject ZCCFUNCCD. Eg. If the variable input parameters are 11, the comments, are retrieved against 11, and every other value against the ZCCFUNCCD characteristic.
Is it such that navigable attributes enabled against multiproviders will not allow the "Document attribute" against the infoobject to work?
Or is it such i have to enable some other parameter against the Multiprovider or infocube that i have overlooked.
Thank you for your help in advance.
Simon

Hi Karthik, Gattu,
Thank you both for your answers.
As you have indicated, i have verified this:
1) the "Attribute Only" in the Miscallaneous area in the General tab of the infoObject is unticked
2) the "Characteristic is a document attribu" in the Miscallaneous area in the General tab of the infoObject is TICKED as this is what allows storing of documents against the infoObject, and is ticked in the original InfoObject. Are we saying here this should be unticked?
3) ZCCFUNCCD is flagged as a Navigational Attribute in all InfoProviders
4) I have also verified that the Multiprovider has all the assignment correctly ticked for the ZCCFUNCCD is ticked for all the InfoProviders.
What i do find different, is that if i look at 0COSTCENTER, then the attribute ZCCFUNCCD, has a check in the column "Texts of Char." But this should not be causing any issue as this is only using the same description for the Navigational Attribute Display in the queries.
Any other suggestions would be most helpful thanks.
Simon

Error after adding attribute

hi i have added attribute in my EmpDetails data control but now when i run the application i get the error Definition LastName of type Attributes is not in EmpDetails1

where is the classes folder and where is some file system tool can you be in details please
my log is*** Using HTTP port 7101 ***
*** Using SSL port 7102 ***
"C:\Documents and Settings\Desmond\Application Data\JDeveloper\system11.1.2.1.38.60.81\DefaultDomain\bin\startWebLogic.cmd"
[waiting for the server to complete its initialization...]
JAVA Memory arguments: -Xms256m -Xmx512m -XX:CompileThreshold=8000 -XX:PermSize=128m -XX:MaxPermSize=512m
WLS Start Mode=Development
CLASSPATH=C:\oracle\MIDDLE~1\ORACLE~1\modules\oracle.jdbc_11.1.1\ojdbc6dms.jar;C:\oracle\MIDDLE~1\patch_wls1035\profiles\default\sys_manifest_classpath\weblogic_patch.jar;C:\oracle\MIDDLE~1\patch_jdev1112\profiles\default\sys_manifest_classpath\weblogic_patch.jar;C:\oracle\MIDDLE~1\JDK160~1\lib\tools.jar;C:\oracle\MIDDLE~1\WLSERV~1.3\server\lib\weblogic_sp.jar;C:\oracle\MIDDLE~1\WLSERV~1.3\server\lib\weblogic.jar;C:\oracle\MIDDLE~1\modules\features\weblogic.server.modules_10.3.5.0.jar;C:\oracle\MIDDLE~1\WLSERV~1.3\server\lib\webservices.jar;C:\oracle\MIDDLE~1\modules\ORGAPA~1.1/lib/ant-all.jar;C:\oracle\MIDDLE~1\modules\NETSFA~1.0_1/lib/ant-contrib.jar;C:\oracle\MIDDLE~1\ORACLE~1\modules\oracle.jrf_11.1.1\jrf.jar;C:\oracle\MIDDLE~1\WLSERV~1.3\common\derby\lib\derbyclient.jar;C:\oracle\MIDDLE~1\WLSERV~1.3\server\lib\xqrl.jar
PATH=C:\oracle\MIDDLE~1\patch_wls1035\profiles\default\native;C:\oracle\MIDDLE~1\patch_jdev1112\profiles\default\native;C:\oracle\MIDDLE~1\WLSERV~1.3\server\native\win\32;C:\oracle\MIDDLE~1\WLSERV~1.3\server\bin;C:\oracle\MIDDLE~1\modules\ORGAPA~1.1\bin;C:\oracle\MIDDLE~1\JDK160~1\jre\bin;C:\oracle\MIDDLE~1\JDK160~1\bin;C:\forms;C:\product\11.2.0\dbhome_1\bin;C:\product\11.2.0\dbhome_1;C:\DevSuiteHome_1\BIN;C:\DevSuiteHome_1\jlib;C:\Program Files\PHP;C:\Program Files\PC Connectivity Solution\;C:\windows\system32;C:\windows;C:\windows\System32\Wbem;C:\Program Files\Common Files\Roxio Shared\DLLShared;C:\Program Files\Common Files\Roxio Shared\DLLShared;C:\Program Files\Common Files\Roxio Shared\9.0\DLLShared;C:\Program Files\Common Files\DivX Shared;c:\Program Files\Java\jdk1.6.0_21\bin;C:\product\11.2.0\dbhome_1\BIN;C:\DevSuiteHome_1;C:\Program Files\Common Files\Roxio Shared\10.0\DLLShared;C:\Program Files\Common Files\Roxio Shared\DLLShared;C:\Program Files\Common Files\Roxio Shared\10.0\DLLShared;C:\mywls;C:\mydomain\base_domain\bin;C:\Program Files\Java\jre6\bin\client;C:\Program Files\Java\jre6\bin;C:\Program Files\Java\jdk1.6.0_21\jre\bin;C:\Program Files\Java\jdk1.6.0_21\bin;C:\Program Files\Java\jdk1.6.0_21;C:\Program Files\Java\jre6;C:\DevSuiteHome_1\forms;C:\DevSuiteHome_1\cgenf61\admin;C:\DevSuiteHome_1\forms;C:\forms\sms_code.pll;C:\mywls\wlserver\bin;C:\Java\jdk1.6.0_21;C:\oracle\MIDDLE~1\WLSERV~1.3\server\native\win\32\oci920_8
* To start WebLogic Server, use a username and *
* password assigned to an admin-level user. For *
* server administration, use the WebLogic Server *
* console at http:\\hostname:port\console *
starting weblogic with Java version:
java version "1.6.0_24"
Java(TM) SE Runtime Environment (build 1.6.0_24-b50)
Java HotSpot(TM) Client VM (build 19.1-b02, mixed mode)
Starting WLS with line:
C:\oracle\MIDDLE~1\JDK160~1\bin\java -client -Xms256m -Xmx512m -XX:CompileThreshold=8000 -XX:PermSize=128m -XX:MaxPermSize=512m -Dweblogic.Name=DefaultServer -Djava.security.policy=C:\oracle\MIDDLE~1\WLSERV~1.3\server\lib\weblogic.policy -Djavax.net.ssl.trustStore=C:\DOCUME~1\Desmond\LOCALS~1\Temp\trustStore5345414217410371315.jks -Doracle.jdeveloper.adrs=true -Dweblogic.nodemanager.ServiceEnabled=true -Xverify:none -da -Dplatform.home=C:\oracle\MIDDLE~1\WLSERV~1.3 -Dwls.home=C:\oracle\MIDDLE~1\WLSERV~1.3\server -Dweblogic.home=C:\oracle\MIDDLE~1\WLSERV~1.3\server -Djps.app.credential.overwrite.allowed=true -Dcommon.components.home=C:\oracle\MIDDLE~1\ORACLE~1 -Djrf.version=11.1.1 -Dorg.apache.commons.logging.Log=org.apache.commons.logging.impl.Jdk14Logger -Ddomain.home=C:\DOCUME~1\Desmond\APPLIC~1\JDEVEL~1\SYSTEM~1.81\DEFAUL~1 -Djrockit.optfile=C:\oracle\MIDDLE~1\ORACLE~1\modules\oracle.jrf_11.1.1\jrocket_optfile.txt -Doracle.server.config.dir=C:\DOCUME~1\Desmond\APPLIC~1\JDEVEL~1\SYSTEM~1.81\DEFAUL~1\config\FMWCON~1\servers\DefaultServer -Doracle.domain.config.dir=C:\DOCUME~1\Desmond\APPLIC~1\JDEVEL~1\SYSTEM~1.81\DEFAUL~1\config\FMWCON~1 -Digf.arisidbeans.carmlloc=C:\DOCUME~1\Desmond\APPLIC~1\JDEVEL~1\SYSTEM~1.81\DEFAUL~1\config\FMWCON~1\carml -Digf.arisidstack.home=C:\DOCUME~1\Desmond\APPLIC~1\JDEVEL~1\SYSTEM~1.81\DEFAUL~1\config\FMWCON~1\arisidprovider -Doracle.security.jps.config=C:\DOCUME~1\Desmond\APPLIC~1\JDEVEL~1\SYSTEM~1.81\DEFAUL~1\config\fmwconfig\jps-config.xml -Doracle.deployed.app.dir=C:\DOCUME~1\Desmond\APPLIC~1\JDEVEL~1\SYSTEM~1.81\DEFAUL~1\servers\DefaultServer\tmp\_WL_user -Doracle.deployed.app.ext=\- -Dweblogic.alternateTypesDirectory=C:\oracle\MIDDLE~1\ORACLE~1\modules\oracle.ossoiap_11.1.1,C:\oracle\MIDDLE~1\ORACLE~1\modules\oracle.oamprovider_11.1.1 -Djava.protocol.handler.pkgs=oracle.mds.net.protocol -Dweblogic.jdbc.remoteEnabled=false -Dwsm.repository.path=C:\DOCUME~1\Desmond\APPLIC~1\JDEVEL~1\SYSTEM~1.81\DEFAUL~1\oracle\store\gmds -Dweblogic.management.discover=true -Dwlw.iterativeDev= -Dwlw.testConsole= -Dwlw.logErrorsToConsole= -Dweblogic.ext.dirs=C:\oracle\MIDDLE~1\patch_wls1035\profiles\default\sysext_manifest_classpath;C:\oracle\MIDDLE~1\patch_jdev1112\profiles\default\sysext_manifest_classpath weblogic.Server
<11 Dec 2011 3:56:44 PM> <Info> <Security> <BEA-090905> <Disabling CryptoJ JCE Provider self-integrity check for better startup performance. To enable this check, specify -Dweblogic.security.allowCryptoJDefaultJCEVerification=true>
<11 Dec 2011 3:56:44 PM> <Info> <Security> <BEA-090906> <Changing the default Random Number Generator in RSA CryptoJ from ECDRBG to FIPS186PRNG. To disable this change, specify -Dweblogic.security.allowCryptoJDefaultPRNG=true>
<11 Dec 2011 3:56:45 PM> <Info> <WebLogicServer> <BEA-000377> <Starting WebLogic Server with Java HotSpot(TM) Client VM Version 19.1-b02 from Sun Microsystems Inc.>
<11 Dec 2011 3:56:45 PM> <Info> <Management> <BEA-141107> <Version: WebLogic Server 10.3.5.0 Fri Apr 1 20:20:06 PDT 2011 1398638 >
<11 Dec 2011 3:56:48 PM> <Notice> <WebLogicServer> <BEA-000365> <Server state changed to STARTING>
<11 Dec 2011 3:56:48 PM> <Info> <WorkManager> <BEA-002900> <Initializing self-tuning thread pool>
<11 Dec 2011 3:56:49 PM> <Notice> <LoggingService> <BEA-320400> <The log file C:\Documents and Settings\Desmond\Application Data\JDeveloper\system11.1.2.1.38.60.81\DefaultDomain\servers\DefaultServer\logs\DefaultServer.log will be rotated. Reopen the log file if tailing has stopped. This can happen on some platforms like Windows.>
<11 Dec 2011 3:56:49 PM> <Notice> <LoggingService> <BEA-320401> <The log file has been rotated to C:\Documents and Settings\Desmond\Application Data\JDeveloper\system11.1.2.1.38.60.81\DefaultDomain\servers\DefaultServer\logs\DefaultServer.log00115. Log messages will continue to be logged in C:\Documents and Settings\Desmond\Application Data\JDeveloper\system11.1.2.1.38.60.81\DefaultDomain\servers\DefaultServer\logs\DefaultServer.log.>
<11 Dec 2011 3:56:49 PM> <Notice> <Log Management> <BEA-170019> <The server log file C:\Documents and Settings\Desmond\Application Data\JDeveloper\system11.1.2.1.38.60.81\DefaultDomain\servers\DefaultServer\logs\DefaultServer.log is opened. All server side log events will be written to this file.>
<11 Dec 2011 3:57:02 PM> <Notice> <Security> <BEA-090082> <Security initializing using security realm myrealm.>
<11 Dec 2011 3:57:19 PM> <Notice> <WebLogicServer> <BEA-000365> <Server state changed to STANDBY>
<11 Dec 2011 3:57:19 PM> <Notice> <WebLogicServer> <BEA-000365> <Server state changed to STARTING>
<MessageLocalizationHelper> <getLocalizedMessage> The resource for bundle "oracle.jrf.i18n.MBeanMessageBundle" with key "oracle.jrf.JRFServiceMBean.checkIfJRFAppliedOnMutipleTargets" cannot be found.
<11 Dec 2011 3:57:42 PM> <Notice> <LoggingService> <BEA-320400> <The log file C:\Documents and Settings\Desmond\Application Data\JDeveloper\system11.1.2.1.38.60.81\DefaultDomain\servers\DefaultServer\logs\DefaultDomain.log will be rotated. Reopen the log file if tailing has stopped. This can happen on some platforms like Windows.>
<11 Dec 2011 3:57:42 PM> <Notice> <LoggingService> <BEA-320401> <The log file has been rotated to C:\Documents and Settings\Desmond\Application Data\JDeveloper\system11.1.2.1.38.60.81\DefaultDomain\servers\DefaultServer\logs\DefaultDomain.log00114. Log messages will continue to be logged in C:\Documents and Settings\Desmond\Application Data\JDeveloper\system11.1.2.1.38.60.81\DefaultDomain\servers\DefaultServer\logs\DefaultDomain.log.>
<11 Dec 2011 3:57:42 PM> <Notice> <Log Management> <BEA-170027> <The Server has established connection with the Domain level Diagnostic Service successfully.>
<11 Dec 2011 3:57:43 PM> <Notice> <WebLogicServer> <BEA-000365> <Server state changed to ADMIN>
<11 Dec 2011 3:57:43 PM> <Notice> <WebLogicServer> <BEA-000365> <Server state changed to RESUMING>
<11 Dec 2011 3:57:43 PM> <Notice> <Security> <BEA-090171> <Loading the identity certificate and private key stored under the alias DemoIdentity from the jks keystore file C:\oracle\MIDDLE~1\WLSERV~1.3\server\lib\DemoIdentity.jks.>
<11 Dec 2011 3:57:44 PM> <Notice> <Security> <BEA-090169> <Loading trusted certificates from the jks keystore file C:\oracle\MIDDLE~1\WLSERV~1.3\server\lib\DemoTrust.jks.>
<11 Dec 2011 3:57:44 PM> <Notice> <Security> <BEA-090169> <Loading trusted certificates from the jks keystore file C:\oracle\MIDDLE~1\JDK160~1\jre\lib\security\cacerts.>
<11 Dec 2011 3:57:44 PM> <Notice> <Security> <BEA-090898> <Ignoring the trusted CA certificate "CN=Entrust Root Certification Authority - G2,OU=(c) 2009 Entrust\, Inc. - for authorized use only,OU=See www.entrust.net/legal-terms,O=Entrust\, Inc.,C=US". The loading of the trusted certificate list raised a certificate parsing exception PKIX: Unsupported OID in the AlgorithmIdentifier object: 1.2.840.113549.1.1.11.>
<11 Dec 2011 3:57:44 PM> <Notice> <Security> <BEA-090898> <Ignoring the trusted CA certificate "CN=thawte Primary Root CA - G3,OU=(c) 2008 thawte\, Inc. - For authorized use only,OU=Certification Services Division,O=thawte\, Inc.,C=US". The loading of the trusted certificate list raised a certificate parsing exception PKIX: Unsupported OID in the AlgorithmIdentifier object: 1.2.840.113549.1.1.11.>
<11 Dec 2011 3:57:44 PM> <Notice> <Security> <BEA-090898> <Ignoring the trusted CA certificate "CN=T-TeleSec GlobalRoot Class 3,OU=T-Systems Trust Center,O=T-Systems Enterprise Services GmbH,C=DE". The loading of the trusted certificate list raised a certificate parsing exception PKIX: Unsupported OID in the AlgorithmIdentifier object: 1.2.840.113549.1.1.11.>
<11 Dec 2011 3:57:44 PM> <Notice> <Security> <BEA-090898> <Ignoring the trusted CA certificate "CN=T-TeleSec GlobalRoot Class 2,OU=T-Systems Trust Center,O=T-Systems Enterprise Services GmbH,C=DE". The loading of the trusted certificate list raised a certificate parsing exception PKIX: Unsupported OID in the AlgorithmIdentifier object: 1.2.840.113549.1.1.11.>
<11 Dec 2011 3:57:44 PM> <Notice> <Security> <BEA-090898> <Ignoring the trusted CA certificate "CN=GlobalSign,O=GlobalSign,OU=GlobalSign Root CA - R3". The loading of the trusted certificate list raised a certificate parsing exception PKIX: Unsupported OID in the AlgorithmIdentifier object: 1.2.840.113549.1.1.11.>
<11 Dec 2011 3:57:44 PM> <Notice> <Security> <BEA-090898> <Ignoring the trusted CA certificate "OU=Security Communication RootCA2,O=SECOM Trust Systems CO.\,LTD.,C=JP". The loading of the trusted certificate list raised a certificate parsing exception PKIX: Unsupported OID in the AlgorithmIdentifier object: 1.2.840.113549.1.1.11.>
<11 Dec 2011 3:57:44 PM> <Notice> <Security> <BEA-090898> <Ignoring the trusted CA certificate "CN=VeriSign Universal Root Certification Authority,OU=(c) 2008 VeriSign\, Inc. - For authorized use only,OU=VeriSign Trust Network,O=VeriSign\, Inc.,C=US". The loading of the trusted certificate list raised a certificate parsing exception PKIX: Unsupported OID in the AlgorithmIdentifier object: 1.2.840.113549.1.1.11.>
<11 Dec 2011 3:57:44 PM> <Notice> <Security> <BEA-090898> <Ignoring the trusted CA certificate "CN=KEYNECTIS ROOT CA,OU=ROOT,O=KEYNECTIS,C=FR". The loading of the trusted certificate list raised a certificate parsing exception PKIX: Unsupported OID in the AlgorithmIdentifier object: 1.2.840.113549.1.1.11.>
<11 Dec 2011 3:57:44 PM> <Notice> <Security> <BEA-090898> <Ignoring the trusted CA certificate "CN=GeoTrust Primary Certification Authority - G3,OU=(c) 2008 GeoTrust Inc. - For authorized use only,O=GeoTrust Inc.,C=US". The loading of the trusted certificate list raised a certificate parsing exception PKIX: Unsupported OID in the AlgorithmIdentifier object: 1.2.840.113549.1.1.11.>
<11 Dec 2011 3:57:44 PM> <Notice> <Server> <BEA-002613> <Channel "DefaultSecure" is now listening on 127.0.0.1:7102 for protocols iiops, t3s, ldaps, https.>
<11 Dec 2011 3:57:44 PM> <Notice> <Server> <BEA-002613> <Channel "Default" is now listening on 127.0.0.1:7101 for protocols iiop, t3, ldap, snmp, http.>
<11 Dec 2011 3:57:44 PM> <Notice> <WebLogicServer> <BEA-000331> <Started WebLogic Admin Server "DefaultServer" for domain "DefaultDomain" running in Development Mode>
<11 Dec 2011 3:57:45 PM> <Notice> <WebLogicServer> <BEA-000365> <Server state changed to RUNNING>
<11 Dec 2011 3:57:45 PM> <Notice> <WebLogicServer> <BEA-000360> <Server started in RUNNING mode>
IntegratedWebLogicServer startup time: 64047 ms.
IntegratedWebLogicServer started.
[Running application HrSystem on Server Instance IntegratedWebLogicServer...]
[03:57:46 PM] **** Warning: Application HrSystem may have been left deployed on the server. Undeploy it from the admin console.
[03:57:48 PM] Web Module HrSystemWebApp.war recognized in project HrSystem.jpr
[03:57:48 PM] ---- Deployment started. ----
[03:57:48 PM] Target platform is (Weblogic 10.3).
[03:57:49 PM] Retrieving existing application information
[03:57:49 PM] Running dependency analysis...
[03:57:49 PM] Deploying 2 profiles...
[03:57:50 PM] Wrote Web Application Module to C:\Documents and Settings\Desmond\Application Data\JDeveloper\system11.1.2.1.38.60.81\o.j2ee\drs\HrSystem\HrSystemWebApp.war
[03:57:51 PM] Wrote Enterprise Application Module to C:\Documents and Settings\Desmond\Application Data\JDeveloper\system11.1.2.1.38.60.81\o.j2ee\drs\HrSystem
[03:57:51 PM] Deploying Application...
[03:58:39 PM] Application Deployed Successfully.
[03:58:39 PM] The following URL context root(s) were defined and can be used as a starting point to test your application:
[03:58:39 PM] http://127.0.0.1:7101/HrSystem-HrSystem-context-root
[03:58:39 PM] Elapsed time for deployment: 51 seconds
[03:58:39 PM] ---- Deployment finished. ----
Run startup time: 51047 ms.
[Application HrSystem deployed to Server Instance IntegratedWebLogicServer]
Target URL -- http://127.0.0.1:7101/HrSystem-HrSystem-context-root/faces/DeptEmpPage
<ViewHandlerImpl> <_checkTimestamp> Apache Trinidad is running with time-stamp checking enabled. This should not be used in a production environment. See the org.apache.myfaces.trinidad.CHECK_FILE_MODIFICATION property in WEB-INF/web.xml
<UIXEditableValue> <_isBeanValidationAvailable> A Bean Validation provider is not present, therefore bean validation is disabled
<LifecycleImpl> <_handleException> ADF_FACES-60098:Faces lifecycle receives unhandled exceptions in phase RENDER_RESPONSE 6
oracle.jbo.NoDefException: JBO-25058: Definition LastName of type Attribute is not found in EmpDetails1.
     at oracle.jbo.server.ViewObjectImpl.findAttributeDef(ViewObjectImpl.java:7322)
     at oracle.adf.model.bc4j.DCJboDataControl.getAttributeDefs(DCJboDataControl.java:2612)
     at oracle.adf.model.binding.DCIteratorBinding.getAttributeDefs(DCIteratorBinding.java:3321)
     at oracle.jbo.uicli.binding.JUCtrlValueBinding.fetchAttrDefs(JUCtrlValueBinding.java:514)
     at oracle.jbo.uicli.binding.JUCtrlValueBinding.getAttributeDefs(JUCtrlValueBinding.java:465)
     at oracle.jbo.uicli.binding.JUCtrlValueBinding.getAttributeCount(JUCtrlValueBinding.java:1475)
     at oracle.jbo.uicli.binding.JUCtrlAttrsBinding.updateValuesFromRow(JUCtrlAttrsBinding.java:134)
     at oracle.jbo.uicli.binding.JUCtrlValueBinding.updateNavigated(JUCtrlValueBinding.java:290)
     at oracle.jbo.uicli.binding.JUIteratorBinding.navigated(JUIteratorBinding.java:310)
     at oracle.jbo.common.RowSetHelper.fireNavigationEvent(RowSetHelper.java:264)
     at oracle.jbo.server.ViewRowSetIteratorImpl.notifyNavigationToRow(ViewRowSetIteratorImpl.java:3661)
     at oracle.jbo.server.ViewRowSetIteratorImpl.notifyNavigation(ViewRowSetIteratorImpl.java:3632)
     at oracle.jbo.server.ViewRowSetIteratorImpl.next(ViewRowSetIteratorImpl.java:1781)
     at oracle.jbo.server.ViewRowSetIteratorImpl.first(ViewRowSetIteratorImpl.java:1585)
     at oracle.jbo.server.ViewRowSetImpl.first(ViewRowSetImpl.java:3556)
     at oracle.jbo.server.ViewObjectImpl.first(ViewObjectImpl.java:10196)
     at oracle.adf.model.binding.DCIteratorBinding.setupRSIstate(DCIteratorBinding.java:808)
     at oracle.adf.model.binding.DCIteratorBinding.refreshControlAndNotifyDCE(DCIteratorBinding.java:707)
     at oracle.adf.model.binding.DCIteratorBinding.rangeRefreshed(DCIteratorBinding.java:914)
     at oracle.jbo.common.RowSetHelper.fireRangeRefreshed(RowSetHelper.java:175)
     at oracle.jbo.server.ViewRowSetIteratorImpl.notifyRangeRefreshed(ViewRowSetIteratorImpl.java:3596)
     at oracle.jbo.server.ViewRowSetIteratorImpl.ensureRefreshed(ViewRowSetIteratorImpl.java:2813)
     at oracle.jbo.server.ViewRowSetIteratorImpl.refresh(ViewRowSetIteratorImpl.java:3033)
     at oracle.jbo.server.ViewRowSetImpl.notifyRefresh(ViewRowSetImpl.java:2797)
     at oracle.jbo.server.ViewRowSetImpl.execute(ViewRowSetImpl.java:1255)
     at oracle.jbo.server.ViewRowSetImpl.executeEmptyRowSet(ViewRowSetImpl.java:1429)
     at oracle.jbo.server.ViewObjectImpl.executeEmptyRowSet(ViewObjectImpl.java:7129)
     at oracle.adfinternal.view.faces.model.binding.FacesCtrlSearchBinding$QueryModelImpl._handleAutoExec(FacesCtrlSearchBinding.java:1863)
     at oracle.adfinternal.view.faces.model.binding.FacesCtrlSearchBinding$QueryModelImpl._performOneTimeActions(FacesCtrlSearchBinding.java:1997)
     at oracle.adfinternal.view.faces.model.binding.FacesCtrlSearchBinding$QueryModelImpl.<init>(FacesCtrlSearchBinding.java:1479)
     at oracle.adfinternal.view.faces.model.binding.FacesCtrlSearchBinding.getQueryModel(FacesCtrlSearchBinding.java:334)
     at oracle.adfinternal.view.faces.model.binding.FacesCtrlSearchBinding.internalGet(FacesCtrlSearchBinding.java:3648)
     at oracle.adf.model.binding.DCExecutableBinding.get(DCExecutableBinding.java:115)
     at javax.el.MapELResolver.getValue(MapELResolver.java:164)
     at com.sun.faces.el.DemuxCompositeELResolver._getValue(DemuxCompositeELResolver.java:176)
     at com.sun.faces.el.DemuxCompositeELResolver.getValue(DemuxCompositeELResolver.java:203)
     at com.sun.el.parser.AstValue.getValue(Unknown Source)
     at com.sun.el.ValueExpressionImpl.getValue(Unknown Source)
     at org.apache.myfaces.trinidad.bean.FacesBeanImpl.getProperty(FacesBeanImpl.java:73)
     at org.apache.myfaces.trinidad.component.UIXComponentBase.getProperty(UIXComponentBase.java:1485)
     at oracle.adf.view.rich.component.UIXQuery.getModel(UIXQuery.java:493)
     at oracle.adf.view.rich.component.UIXQuery._setupAndStoreContextInRequest(UIXQuery.java:301)
     at oracle.adf.view.rich.component.UIXQuery.encodeBegin(UIXQuery.java:222)
     at javax.faces.component.UIComponent.encodeAll(UIComponent.java:1650)
     at org.apache.myfaces.trinidad.render.CoreRenderer.encodeChild(CoreRenderer.java:624)
     at oracle.adf.view.rich.render.RichRenderer.encodeChild(RichRenderer.java:3201)
     at org.apache.myfaces.trinidad.render.CoreRenderer.encodeAllChildren(CoreRenderer.java:641)
     at oracle.adfinternal.view.faces.renderkit.rich.PanelHeaderRenderer.renderChildrenAfterHelpAndInfo(PanelHeaderRenderer.java:637)
     at oracle.adfinternal.view.faces.renderkit.rich.PanelHeaderRenderer._renderContentCell(PanelHeaderRenderer.java:1169)
     at oracle.adfinternal.view.faces.renderkit.rich.PanelHeaderRenderer.renderContentRow(PanelHeaderRenderer.java:575)
     at oracle.adfinternal.view.faces.renderkit.rich.PanelHeaderRenderer.encodeAll(PanelHeaderRenderer.java:248)
     at oracle.adf.view.rich.render.RichRenderer.encodeAll(RichRenderer.java:1452)
     at org.apache.myfaces.trinidad.render.CoreRenderer.encodeEnd(CoreRenderer.java:511)
     at org.apache.myfaces.trinidad.component.UIXComponentBase.encodeEnd(UIXComponentBase.java:923)
     at javax.faces.component.UIComponent.encodeAll(UIComponent.java:1659)
     at org.apache.myfaces.trinidad.render.CoreRenderer.encodeChild(CoreRenderer.java:624)
     at oracle.adf.view.rich.render.RichRenderer.encodeChild(RichRenderer.java:3201)
     at oracle.adfinternal.view.faces.renderkit.rich.PanelGroupLayoutRenderer._encodeChild(PanelGroupLayoutRenderer.java:447)
     at oracle.adfinternal.view.faces.renderkit.rich.PanelGroupLayoutRenderer.access$1500(PanelGroupLayoutRenderer.java:30)
     at oracle.adfinternal.view.faces.renderkit.rich.PanelGroupLayoutRenderer$EncoderCallback.processComponent(PanelGroupLayoutRenderer.java:734)
     at oracle.adfinternal.view.faces.renderkit.rich.PanelGroupLayoutRenderer$EncoderCallback.processComponent(PanelGroupLayoutRenderer.java:637)
     at org.apache.myfaces.trinidad.component.UIXComponent.processFlattenedChildren(UIXComponent.java:187)
     at org.apache.myfaces.trinidad.component.UIXComponent.processFlattenedChildren(UIXComponent.java:318)
     at org.apache.myfaces.trinidad.component.UIXComponent.encodeFlattenedChildren(UIXComponent.java:283)
     at oracle.adfinternal.view.faces.renderkit.rich.PanelGroupLayoutRenderer.encodeAll(PanelGroupLayoutRenderer.java:360)
     at oracle.adf.view.rich.render.RichRenderer.encodeAll(RichRenderer.java:1452)
     at org.apache.myfaces.trinidad.render.CoreRenderer.encodeEnd(CoreRenderer.java:511)
     at org.apache.myfaces.trinidad.component.UIXComponentBase.encodeEnd(UIXComponentBase.java:923)
     at javax.faces.component.UIComponent.encodeAll(UIComponent.java:1659)
     at org.apache.myfaces.trinidad.render.CoreRenderer.encodeChild(CoreRenderer.java:624)
     at oracle.adf.view.rich.render.RichRenderer.encodeChild(RichRenderer.java:3201)
     at oracle.adfinternal.view.faces.renderkit.rich.DecorativeBoxRenderer.encodeFacet(DecorativeBoxRenderer.java:440)
     at oracle.adfinternal.view.faces.renderkit.rich.DecorativeBoxRenderer._encodeCenterPane(DecorativeBoxRenderer.java:704)
     at oracle.adfinternal.view.faces.renderkit.rich.DecorativeBoxRenderer.encodeAll(DecorativeBoxRenderer.java:380)
     at oracle.adf.view.rich.render.RichRenderer.encodeAll(RichRenderer.java:1452)
     at org.apache.myfaces.trinidad.render.CoreRenderer.encodeEnd(CoreRenderer.java:511)
     at org.apache.myfaces.trinidad.component.UIXComponentBase.encodeEnd(UIXComponentBase.java:923)
     at javax.faces.component.UIComponent.encodeAll(UIComponent.java:1659)
     at org.apache.myfaces.trinidad.render.CoreRenderer.encodeChild(CoreRenderer.java:624)
     at oracle.adf.view.rich.render.RichRenderer.encodeChild(RichRenderer.java:3201)
     at oracle.adfinternal.view.faces.renderkit.rich.DecorativeBoxRenderer.encodeFacet(DecorativeBoxRenderer.java:440)
     at oracle.adfinternal.view.faces.renderkit.rich.DecorativeBoxRenderer._encodeCenterPane(DecorativeBoxRenderer.java:704)
     at oracle.adfinternal.view.faces.renderkit.rich.DecorativeBoxRenderer.encodeAll(DecorativeBoxRenderer.java:380)
     at oracle.adf.view.rich.render.RichRenderer.encodeAll(RichRenderer.java:1452)
     at org.apache.myfaces.trinidad.render.CoreRenderer.encodeEnd(CoreRenderer.java:511)
     at org.apache.myfaces.trinidad.component.UIXComponentBase.encodeEnd(UIXComponentBase.java:923)
     at javax.faces.component.UIComponent.encodeAll(UIComponent.java:1659)
     at org.apache.myfaces.trinidad.render.CoreRenderer.encodeChild(CoreRenderer.java:624)
     at oracle.adf.view.rich.render.RichRenderer.encodeChild(RichRenderer.java:3201)
     at oracle.adfinternal.view.faces.renderkit.rich.PanelStretchLayoutRenderer.encodeCenterFacet(PanelStretchLayoutRenderer.java:879)
     at oracle.adfinternal.view.faces.renderkit.rich.PanelStretchLayoutRenderer._encodeCenterPane(PanelStretchLayoutRenderer.java:1294)
     at oracle.adfinternal.view.faces.renderkit.rich.PanelStretchLayoutRenderer._encodeMiddlePanes(PanelStretchLayoutRenderer.java:351)
     at oracle.adfinternal.view.faces.renderkit.rich.PanelStretchLayoutRenderer.encodeAll(PanelStretchLayoutRenderer.java:316)
     at oracle.adf.view.rich.render.RichRenderer.encodeAll(RichRenderer.java:1452)
     at org.apache.myfaces.trinidad.render.CoreRenderer.encodeEnd(CoreRenderer.java:511)
     at org.apache.myfaces.trinidad.component.UIXComponentBase.encodeEnd(UIXComponentBase.java:923)
     at javax.faces.component.UIComponent.encodeAll(UIComponent.java:1659)
     at org.apache.myfaces.trinidad.render.CoreRenderer.encodeChild(CoreRenderer.java:624)
     at oracle.adf.view.rich.render.RichRenderer.encodeChild(RichRenderer.java:3201)
     at org.apache.myfaces.trinidad.render.CoreRenderer.encodeAllChildren(CoreRenderer.java:641)
     at oracle.adf.view.rich.render.RichRenderer.encodeAllChildrenInContext(RichRenderer.java:3062)
     at oracle.adfinternal.view.faces.renderkit.rich.FormRenderer.encodeAll(FormRenderer.java:274)
     at oracle.adf.view.rich.render.RichRenderer.encodeAll(RichRenderer.java:1452)
     at org.apache.myfaces.trinidad.render.CoreRenderer.encodeEnd(CoreRenderer.java:511)
     at org.apache.myfaces.trinidad.component.UIXComponentBase.encodeEnd(UIXComponentBase.java:923)
     at javax.faces.component.UIComponent.encodeAll(UIComponent.java:1659)
     at org.apache.myfaces.trinidad.render.CoreRenderer.encodeChild(CoreRenderer.java:624)
     at oracle.adf.view.rich.render.RichRenderer.encodeChild(RichRenderer.java:3201)
     at org.apache.myfaces.trinidad.render.CoreRenderer.encodeAllChildren(CoreRenderer.java:641)
     at oracle.adf.view.rich.render.RichRenderer.encodeAllChildrenInContext(RichRenderer.java:3062)
     at oracle.adfinternal.view.faces.renderkit.rich.DocumentRenderer.encodeAll(DocumentRenderer.java:1277)
     at oracle.adf.view.rich.render.RichRenderer.encodeAll(RichRenderer.java:1452)
     at org.apache.myfaces.trinidad.render.CoreRenderer.encodeEnd(CoreRenderer.java:511)
     at org.apache.myfaces.trinidad.component.UIXComponentBase.encodeEnd(UIXComponentBase.java:923)
     at javax.faces.component.UIComponent.encodeAll(UIComponent.java:1659)
     at javax.faces.component.UIComponent.encodeAll(UIComponent.java:1655)
     at oracle.adfinternal.view.faces.component.AdfViewRoot.encodeAll(AdfViewRoot.java:91)
     at com.sun.faces.application.view.JspViewHandlingStrategy.doRenderView(JspViewHandlingStrategy.java:431)
     at com.sun.faces.application.view.JspViewHandlingStrategy.renderView(JspViewHandlingStrategy.java:233)
     at org.apache.myfaces.trinidadinternal.application.ViewDeclarationLanguageFactoryImpl$ChangeApplyingVDLWrapper.renderView(ViewDeclarationLanguageFactoryImpl.java:350)
     at com.sun.faces.application.view.MultiViewHandler.renderView(MultiViewHandler.java:131)
     at javax.faces.application.ViewHandlerWrapper.renderView(ViewHandlerWrapper.java:273)
     at org.apache.myfaces.trinidadinternal.application.ViewHandlerImpl.renderView(ViewHandlerImpl.java:165)
     at oracle.adfinternal.view.faces.lifecycle.LifecycleImpl._renderResponse(LifecycleImpl.java:1027)
     at oracle.adfinternal.view.faces.lifecycle.LifecycleImpl._executePhase(LifecycleImpl.java:334)
     at oracle.adfinternal.view.faces.lifecycle.LifecycleImpl.render(LifecycleImpl.java:232)
     at javax.faces.webapp.FacesServlet.service(FacesServlet.java:313)
     at weblogic.servlet.internal.StubSecurityHelper$ServletServiceAction.run(StubSecurityHelper.java:227)
     at weblogic.servlet.internal.StubSecurityHelper.invokeServlet(StubSecurityHelper.java:125)
     at weblogic.servlet.internal.ServletStubImpl.execute(ServletStubImpl.java:300)
     at weblogic.servlet.internal.TailFilter.doFilter(TailFilter.java:26)
     at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
     at oracle.adf.model.servlet.ADFBindingFilter.doFilter(ADFBindingFilter.java:173)
     at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
     at oracle.adfinternal.view.faces.webapp.rich.RegistrationFilter.doFilter(RegistrationFilter.java:122)
     at org.apache.myfaces.trinidadinternal.webapp.TrinidadFilterImpl$FilterListChain.doFilter(TrinidadFilterImpl.java:468)
     at oracle.adfinternal.view.faces.activedata.AdsFilter.doFilter(AdsFilter.java:60)
     at org.apache.myfaces.trinidadinternal.webapp.TrinidadFilterImpl$FilterListChain.doFilter(TrinidadFilterImpl.java:468)
     at org.apache.myfaces.trinidadinternal.webapp.TrinidadFilterImpl._doFilterImpl(TrinidadFilterImpl.java:293)
     at org.apache.myfaces.trinidadinternal.webapp.TrinidadFilterImpl.doFilter(TrinidadFilterImpl.java:199)
     at org.apache.myfaces.trinidad.webapp.TrinidadFilter.doFilter(TrinidadFilter.java:92)
     at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
     at oracle.adf.library.webapp.LibraryFilter.doFilter(LibraryFilter.java:180)
     at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
     at oracle.security.jps.ee.http.JpsAbsFilter$1.run(JpsAbsFilter.java:111)
     at java.security.AccessController.doPrivileged(Native Method)
     at oracle.security.jps.util.JpsSubject.doAsPrivileged(JpsSubject.java:313)
     at oracle.security.jps.ee.util.JpsPlatformUtil.runJaasMode(JpsPlatformUtil.java:413)
     at oracle.security.jps.ee.http.JpsAbsFilter.runJaasMode(JpsAbsFilter.java:94)

Adding attributes to an infoobject with a reference char.

Similar Messages

Maybe you are looking for