Adding audio/Music is this a glitch?

When you have laid down the audio tracks and then go back to add additional audio, i find that it pushes any music that has been laid down forward that same amount as was added, thus setting everything from that point off on the music tracks line? is this a glitch? is there a resolve to this? i find this happens in imovie as well. . .you've got everything set perfectly to the nth and then you realize you forgot to add a small music track and you go back in and it sets the timing off the whole thing. . .any help with this one?

When you have laid down the audio tracks and then go back to add additional audio, i find that it pushes any music that has been laid down forward that same amount as was added, thus setting everything from that point off on the music tracks line? is this a glitch?
Nope. Not a glitch. It sounds like you're doing an INSERT edit when you should be doing an OVERWRITE edit.
-DH

Similar Messages

Adding audio (music)to my project

I am trying to create a highlight video of all my sons football games. After spending hours learning ( new user for PE) I finally figured out editing out my highlights , it was much easier placing my clips in the timeline. I did not figure this out until half way through my project. I am all finished with my 10 minute video and unlinked the video from the audio. After reading some of the comments in the forum I might have a problem adding music into my project. The first part all my clips are in different tracks and the 2nd half of my video are in 1 track. Before I spend many hours again learning from my mistakes am Igoingto have problems adding one or two song to this video. If I am, what is the easiest way to solve this problem. Please any help is appreciated!!

No need to solve it. It's not a problem having your clips on whatever tracks you want, as long as it looks good to you on playback.

Adding audio / music then saving file as pdf

I produce a monthly magazine using pages. Once done I save the file as a PDF.
I woud like to add a audio file or music file to pages then save it as a PDF and send it out.
Is there a way of doing this?
I know you can drag and drop a audio file onto the page but it disappears when you save it as a PDF and I do need the PDF format.
Any help?
Thanks!

You need to add all media files into the pdf using Adobe Acrobat Pro. Pages won't include them.
There may also be 3rd party apps and websites that do the same task.
Peter

HT1296 so itunes deleted all my music from itunes, I still have all the original files however I unwittingly added new music after this happened which wipes the itl and xml files. I have my playlists on my iphone. how do I get itunes back to its original

If this cant be resolved I think apple and I shall be parting ways its been a long time in the coming

Also, what causes this, so I can avoid it in the future?

Pointer when adding audio to clip

When adding audio/music to a clip (not background) it sits below the clip with a small arrow/pointer pointing to the clip. What does that pointer indicate? Why does it move? Can someone point me to resourcs that explain that in detail?
Thanks

I think you are right that the marker "stays". I don't have any special insight to how this was coded by Apple, but it appears to me that you initially attach the audio to a certain frame in a certain clip. Later you can drag the audio forward or backward, and it may remain attached to the initial frame, but be given an offset. For example, the audio is attached to frame five of clip three, but the audio actually begins at -30 or 30 frames to the left of the anchor frame.
I think if you experimented with it, you might find that if you delete the clip with the anchor frame, the audio is deleted, too, but I don't have time to test this right now.

When adding audio books to ipod either manually or by syncing, the tracks seem to be in the right order but they play back in a random order which means you can't listen to the book. How do you overcome this? (Bill)

I have tried adding audio books to my ipod classic, both by syncing and manually. The tracks come up in the right order in the menu but when listening they will often play (not always) in a random order. How do I overcome this, as it is making listening to books impossible. (Tarraganda)

I have found the problem myself when I got into the Settings. Somehow it had been put onto shuffle all music files and once I turned that off it reverted to normal. I realised something basic was wrong when our other ipod that had been synced at the same time didn't have a problem. However, I had put all the books on manually, one album at a time as problems occurred when syncing the whole library, including multiple albums for the same piece of music.

I added background music to the video clip, but I only hear noise, no video clip audio or the background music audio

I added background music to the video clip in iMovie, the playback runs ok on the right corner preview screen, if I share it to movie clip or itunes or theather, I only hear noise, no video clip audio or the music audio
If I don't put additional audio to the clip. audio effect or music background, the video plays normally
I detached the audio from the video clip and deleted it, that way it was possible to listen to the music background and see the actual video clip, but no audio from the video clip.
How can I have both?

Hi
My first thought is -
Where are the original Audio file ?
If it was on an Audio-CD then the CD is Ejected and one tries to play the movie - it can not find it = Silence.
You are using an Non-Destructive Video editor - meaning that You have raw material - Video, Audio and photos but no Movie in Project - only a text document directing How You want it to be played. So if Audio is not where it was when this document were created - iMovie can not find it and e.g. audio goes silent.
Yours thinking - Bengt W

My ipod nano was synced by itunes and removed all of my music and game files. I am in the process of adding my music back one cd at a time, but there is no history of tetris that I paid for from the itunes store. How can I get this game back for my ipod?

My ipod nano was synced by itunes and removed all of my music and game files, and replaced my music with my kids music that they have put into the current itunes library. My music is nowhere to be found on my computer, so now I am in the long, forever process of adding my music back one cd at a time, but there is no history of tetris that I paid for from the itunes store. How can I get this game back for my ipod?

Contact iTunes support and explain your situation to them. They may let you redownload it at no cost.
http://www.apple.com/support/itunes/contact.html
If they don't, I'm afraid you'll have to purchase it again. Sorry.
B-rock

TS4124 how do sync a book that I have added as music to itunes on my iMac and then listen to this book on my iPhone. Itunes says the icloud status is waiting so the song(book) is in the process of being matched but has not yet been processed. (no help t

how do sync a book that I have added as music to itunes on my iMac and then listen to this book on my iPhone. Itunes says the icloud status is waiting so the song(book) is in the process of being matched but has not yet been processed. (no help there)

Hi,
Why are you trying to add a book as music? It will not match as this only applies to music files. It will be uploaded if the bit rate is 96 Kbps or greater.
You should change media type to audiobook and you will be able to sync by wifi or USB.
Jim

When synching my ipod 80 gig classic, I get this message " iPod cannot be synched. A duplicate file name was specified" And yet, any new music in iTunes is added. What causes this message?

When synching my ipod 80 gig classic, I get this message " iPod cannot be synched. A duplicate file name was specified" And yet, any new music in iTunes is added. What causes this message?

Try deleting the iPod Photo Cache from the nominated folder that you have set up to sync photos to the devices.
See iTunes: Understanding the iPod Photo Cache folder for more info.
tt2

I created my first movie using one long video (all photos) clip created in Keynote and imported to Imovie. I added many music clips, some overlapping. I now want to lay down a new updated video clip, eliminate the original but retain the audio. Can I?

I created my first movie using one long video (a montage of photos) clip created in Keynote and imported to Imovie. I added many music clips, some overlapping. I now want to lay down a new updated video clip, eliminate the original video, but retain the audio. Can I? And if so, how. I cant seem to
find the info anywhere in help.

I would suggest that you go to iMovie/Preferences and make sure that Advanced Tools are enabled.
Then, you can drag your new video clip on top of your old clip and a popup menu should appear. Choose REPLACE.

Adding Background Music Underneath Narration on a Single Slide in Capt 5

I just finished putting together my first Adobe Captivate 5 project and there is one last detail I need to learn how to do. I have recorded narration on every slide. I now want to insert background music underneath my title (first) slide and on the conclusion (last) slide. Somehow I accomplished this on the first slide, but I cannot remember how I did it and cannot seem to replicate it on the last slide. I imported the jingle called Corporate Video2 from the Adobe library. When I click on my last slide and go to Properties and click Edit Audio, I hear my narration. When I click on my last slide and then go up to the little music note icon up top on the toolbar called “Background Audio” I see and hear the corporate video jingle. How do I meld these into one audio file? What is the proper technique to add background audio? Should you lay down the background music first and then record audio or the other way around? Is there some little trick or glitch I’m missing? I only want to do this on one slide, not the entire project. When I preview the project I only get narration, no music, even though when I go to Background Audio, it looks like I have successfully imported the music file. PLEASE HELP! I got this far and want to put this project to bed! Thank you.

Hi there,
Welcome to Adobe Captivate Forums
In Captivate audio can be recorded to 1. Slides, 2. Objects and 3. Project background.
So you can record in whatever way you want to. In the case from what you mention, i can understand that you need to add background audio to first and last slide of your project.
First let me explain you that background audio will be for the entire project. So if you add an audio to project background then it plays for the project till the end of audio. If you want the audio to loop over and play again then you need to enable that option in background audio dialog. This way audio will play in background for the entire project.
Now considering your case i can understand that you have recorded audio for individual slides. So the slides already have a audio and you cant add two audio files to the slide. To accomplish this what you can do is to insert a text caption on first slide ( and last slide) of the project and make the text caption transparent. Later you can delete the text of the text caption . This way you have an object on slide which is not visible to others. Now you can import audio( background music) to this text caption and in the published output you can hear the audio from the text caption and the slide audio.
This will give you narration + Background audio on specific slides effect.
Try it out and let us know if you wanted anything more than this.
Thanks
Ashwin Bharghav B
Adobe Captivate Team

Ducking doesn't work on added audio track

I have an iMovie 09 video clip of people dancing to music in the background. I attached a separate audio clip of music to the video (it appears in green beneath the video).
At a certain point in the video, I want to fade the added music clip so you can hear what's going on in the video. So I went to "Audio Adjustments" on the video clip and checked the Ducking box to that the music on the added audio clip would fade at that certain point.
But it doesn't fade at all. How do I fix this? Thanks.

You should be able to trim expanded audio in previous versions, also. Then you do trim, the audio will only turn dark, not get physically shorter, when you Expand Audio Components. When you Expand Audio, it will physically change the length of the audio section. One thing to remember is that when you Expand Audio/Video, the whole clip is selected by default, click on the head or tail of the audio first. If it is red, you can not expand it out, but can trim it in.
Tom is correct about ROLL edits, they only work in FCPX 10.1 and later. Only works with clips in a Storyline. Only work with audio that has enough Handles to accoedate the Roll edit.

When adding audio to my webpage do I have to add a photo as well?

Hello,
I just set up my website using iweb and it was really fun and easy. I added an audio file to one of my pages and it required me to add a photo or it wouldn't add the song.
Can this be changed?
Thanks, Chad
Powerbook G4 1.5 Mac OS X (10.4.2)

A clip from the help file:
To add audio:
In the site organizer, select the webpage you want to add the audio to.
Do one of the following:
To add a single audio file, drag it to the image placeholder on a webpage or to the webpage canvas. If you drag the audio file to the image placeholder on a blog (the Blog or Podcast template), iWeb creates a podcast. (See the podcast topics below.)
To add more than one audio file, drag them to the webpage canvas. (Select more than one file at a time by Command-clicking.)
To add links to the songs in the iTunes Music Store (not the audio files themselves), drag a playlist (from the Media Browser or iTunes) or a song from the iTunes Music Store to the webpage canvas.
If you added audio files (not links), you can drag a graphics file to the placeholder above each song's audio controls. Or you can create a text box with a solid color fill to put over the placeholder. You can resize the graphic and the audio controls by dragging the handles.

Adding audio to presentation

I added audio from my I-Tunes Library to my presentation. But when I play my presentation, there are silent gaps in the played music. (not in the original music). How can I solve this problem ?

Look Here:
http://docs.info.apple.com/article.html?path=Keynote/5.0/en/kyntc68d86ec.html
Good Luck

Adding audio/Music is this a glitch?

Similar Messages

Maybe you are looking for