Adding audio to edited video

Hey, I've been editing a short movie with premiere and I accidentally removed the audio from half the footage and can't restore it, all the auto save files saved it after I finished editing. All I want to do is get the audio from the edited video, as the video clips are there but the audio aren't, only in the original clip does it have the audio.
Thanks,
Josh

If the original clip stil has the audio, perhaps you could insert this on the end of your sequence. Unlink the audio, then delete the original clip and slide the unlinked audio back into the position you want it along the timeline.

Similar Messages

Adding audio suddenly creating video gap

I'm working on a slide show and it was going really well until today. The video is finished, with transitions, effects, etc., and I've been adding audio over the past couple of days. Today, I added a couple of songs and they did fine, then I added another one and it caused a gap in the video. When I go to the video line and right-click the gap, the "Delete and Close Gap" is greyed out so I can't use it. The gap doesn't "match" the audio--it starts about halfway through the audio and then ends where the audio ends. This is really frustrating, as I can't see anything different about this section of the project from the rest of it. (same file types, etc.) Can anyone tell me why this is happening and how I can correct it? Thanks!

Steve--Thanks so much--of course that worked like a charm! :) I can always count on you to know right away what I'm doing wrong!! I do have one more question--why did the ripple feature only kick in towards the end? I had 1 hour and 6 minutes of audio tracks that didn't cause any of the ripples, then it seemed to happen out of nowhere. I don't *think* I was doing anything differently up to that point. I'm mystified! But also very, very thankful to know the cure--I'll be doing some last minute touch-ups and then I'll be ready to burn this one! Yahoooooo!!!!! :) Take care, Tina

Adding Audio to my Video

I have my HD source file and my 6 Channel AIFF file (Both are separate)
I want to encode a 5.1 H264 MOV file. How can I add my 6 channel audio to my video source in Compressor?

The media files for each episode are contained in the 'enclosure' tag and you can't have mulptiple ones in an episode - well, you can, but all but the first will be ignored.
So if you want to have audio-only versions you have to create an extra episode for each one. The problem with this is that people who want the audio only version are likely to find themselves downloading the video version, or vice versa, depending on how you've arranged it.
It's a better idea to create an entirely separate podcast containing only the audio files - the usual practice is to have the same title for each but with ' - Video version' or '- Audio version' as applicable, or something along those lines. You would obviously have to go through the submissions process again for the new feed.

Adding audio to a video demo Captivate 8

How can I add mp3 audio files to a video demonstration I recorded in Captivate 8? I recorded the demo. Then, clicked edit. When I choose Media, the audio option is grayed out and does not let me select.

That damned BBB, they took it over from the cptx (you can hear that I don't like that bar at all). For a video demo project is pretty confusing.
You have to use the Audio menu in this case. You have the option Import, Project Narration there. If there is already a Project Narration, you'll have to go to Record, and use the Add/Replace tab to import and replace the existing Narration.
Sorry for my ranting. I so miss the CP7 UI.

Adding audio and/or video without altering time line...

I currently have a completed i-movie project of which I wanted to add some "stuff" at the begining of the presentation and actually at one point in the middle. I want to "insert" this audio and a few slides without altering the rest of the project. Am I am to anchor points so that what ever I do around those points does not affect the timing of what is already there?
Thanks in advance all.
JCole

Hi
First your server does not require javascript only your browser, (standard in all modern browsers).
You also do not necessarily require the flash program, (your browser will require a plug-in for the audio video to play).
You will require some form of video/media encoding software to convert your files to the required format though, (do a search using your preferred search engine for video encoder), then use dreamweavers insert file option to insert your audio/video file into your html
PZ
www.pziecina.com

Lost audio while editing video

I lost my volume while ediing my video, I checked my volume and it wasn't muted, what else can it be?

Llamadude99
This morning I replied to your follow up where you told of your success and overcoming your audio issues for your Premiere Elements project. But, after I replied to your news of success, I could not find your latest post nor mine in your thread.
I finally found them, but in the old 2013 thread of another. Here is the copy/paste from the 2013 thread to your thread here
17. Llamadude99,
02-Mar-2014 22:30    in reply to A.T. Romano
Report
I was trying different things and I went to tools to narration. I removed the mute audio before recording, then deleted the narration I previously did and then pressed undo, to bring it back and my audio returned on my video. Very strange but it worked. I wanted to thank you for taking the time to try to help me with this situation.I really appreciate it.
Was this helpful? Yes    No
Reply
|                        Translate
      10,418 posts
30-Apr-2006
18. A.T. Romano,
03-Mar-2014 07:38    in reply to Llamadude99
Llamadude99
Thanks for the update.
Later today I am going to try to get narration to cause the rest of the audio to fail. If I can, I will try what you said worked for you, that is,
I removed the mute audio before recording, then deleted the narration I previously did and then pressed undo, to bring it back and my audio returned on my video.
If this works, it may be the answer to this type of situation, and it will be a major contribution to the Premiere Elements community.
Congratulation on your success. Great job.
Best wishes to your daughter, her cousin, and you.
ATR

Adding audio to a Video CD slideshow using Toast

I have been able to create a Video CD slideshow using Toast Titanium 7.0. Has anyone successfully been able to add audio to a VCD slideshow? If so exactly how did you do it. The Toast help files were no help. They instructed me to use the application Motion Pictures which comes bundled with Toast. I was able to create a slideshow with audio with this application but could not figure out how to import it into Toast.

1. I suggest you post all questions concerning the use of Toast to Roxio's own Discussion Groups. That's where you will find the ardent Toast gurus. This isn't the "Using Roxio Toast" Discussion.
2. See also the "Other links" section of my my "VCD and SVCD Players" FAQ. That section contains links to some other sources of VCD/SVCD hints, tips, etc.
Good luck!
Dr. Smoke
Author: Troubleshooting Mac® OS X
Note: The information provided in the link(s) above is freely available. However, because I own The X Lab™, a commercial Web site to which some of these links point, the Apple Discussions Terms of Use require I include the following disclosure statement with this post:
I may receive some form of compensation, financial or otherwise, from my recommendation or link.

Adding audio to Video Demo: Captivate 7

Hello, i have several questions about working with audio in a video demo in Captivate 7.
I have a video demo that was captured without audio, then the intended script changed signifigantly so the timing is way off (sometimes the video doesn't hold on a screen long enough for the narrator to finish talking, sometimes it holds too long).
Any tutorials out there for adding audio after the video demo is recorded, when the timing is all off and I need to hold on some frames longer than the movie does? I'm doing still screen grabs and inserting them as images for the duration of the hold, but there's got to be a better way!
Is there any way to add text-to-speech in the Video Demo (other than adding it in slide notes, exporting the audio file and then importing it to the background of the video demo?)
When adding audio to a Captivate 7 video demo, is it better to add it to the video (Edit Video Demo > Audio > Import to > Background) or to add it to the slide in the regular timeline? Pros/Cons? Best practice?
Thanks!

Are you un-checking "Edit Volume" before you play it?
Sue
Hi Sue, Thanks for your help, I am new to the Mac, so forgive me if I am slow!
I cannot find "Edit Voume".
I can find "Show clip volume" in the "View menu" is that the same thing?
Thanks for your help. Chatch

How can i use original audio track in video editing for iPad 2?

I am struggling to understand how the video editing apps work for iPad 2, and specifically, to understand why all the editing apps I have looked at explain how you can make these terrific video clips by ADDING audio tracks from iTunes, or. From the audio library. I just want to use the original audio on the tape? Is that so strange? Today I took a video clip of my daughter singing with her guitar. I wanted to shorten the length a bit, so I downloaded a couple of Visio editing apps. When I pulled the clip out of my Camera Roll storage into the video editing screen, there was no sound at all,though there were ways to add other sounds ( for .99cents) most frustrating is that nowhere, does Apple explain this. The tutorials just show someone editing a video of their friends ( with no sound) And adding text and music, as if it's normal not to include the actual sound that originally accompanied the video clip. Seems like i wouldn't be the only customer who would prefer to hear my daughters own voice Ina video of her singing, and would like thisexplainedbefore I started downloading editing apps. If it can't be done, couldn't This be posted?

I am not understanding your question, or your complaint, if it is a complaint.
I movies takes a video clip, including its audio track.
You have the option of mutimg it, or of importing some other sound from your music library, or narrating. What other option do you want?

DVD to uncompressed Video/Audio for editing

I NEED TO TAKE A DVD BACK TO UNCOMPRSSED VIDEO AND AUDIO TO EDIT THE AUDIO AND THEN BACK TO A DVD FORMAT WITH CHAPTERS. I NEED TO KEEP IT IN HIGH QUALITY. I HAVE BOTH FINNAL CUT PRO AND EXPRSS. MAYBE QUICKTIME? THANKS BOB

Try this on the Final Cut Pro forum. You can't do uncompressed in FCE. Of course it's already compressed and going through an extra compression cycle will not help. You might be able to cut and paste audio tracks in the QT Pro player. Not sure about chapter markers in the QT player, whether they can be added there. Basically FCE isn't the tool for this.

On a Mac, in Adobe Photoshop CC 2014, when adding audio to an edit, i get the message "Could not complete your request, because Dynamiclink is not available". When performing the exact same operation in Adobe Photoshop CC, i can add audio in the same way,

On a Mac, in Adobe Photoshop CC 2014, when adding audio to an edit, i get the message "Could not complete your request, because Dynamiclink is not available".
When performing the exact same operation in Adobe Photoshop CC, i can add audio in the same way, no error message. Any ideas to solve this, anyone? Would be greatly appreciated.

I tried to update and it keeps telling me to get the Application Manager. And this is what happens
Adobe Application Manager failed and it told me to download the Adobe Support Advisor.
Adobe Support Advisor told me that there was an issue:" cpsid_82829s1: "A restart is pending," bootstrapper error has occurred. "Token Number: 40-87772-063201122012
I followed the instructions it gave me to correct this issue:
If you receive the error "Installer has detected that a machine restart is pending. It is recommended that you quit the installer, restart try again," do the following:
#Restart the computer and try the installation again.
#If the installation fails, delete the InProgress registry key:
Disclaimer: This procedure involves editing the Windows registry. Adobe doesn't provide support for editing the registry, which contains critical system and application information. Make sure to back up the registry before editing it. For more information about the registry, see Windows registry information for advanced users on the Microsoft support site, or contact Microsoft.
Launch Windows Registry Editor.
(Windows XP) Choose Start > Run, type regedit in the Open text box and click OK.
(Windows Vista/ Windows 7) Choose Start, type regedit in the Search box, and press Enter.
Navigate to HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Session Manager.
Delete the InProgress key.
I was not able to find the "InProgress" key.

I would like to see a built-in way of adding audio and video files.

As it is, you have to rely on third-party solutions for adding mp3 audio files and video to Muse sites. Thanks

Hi,
I tried to reproduce what you were getting by building a simple VI but I havent had much luck (I have attached the VI).
Could you post your code so that I can take a look at it?
Feroz P
National Instruments
Attachments:
Graph.vi ‏39 KB

Editing video or audio in increments LESS than 1 frame?

Case #0183085485
Updated
Wednesday, March 21, 2012 7:59:24 PM PDT
Opened
Thursday, March 15, 2012 4:54:02 PM PDT
Status
Open - Pending Adobe Response
Product
Production Premium 5.5
Support contract
Adobe Support Program
Subject
Premiere Pro CS5.5: Edit Audio
NOTES & RESPONSES
Notes from Customer
Wednesday, March 21, 2012 7:59:24 PM PDT
Once upon a time there was a princess who was very sad. She had discovered that her favorite pet guinea pig had been kidnapped by a
n evil Chihuaha named "El Diablo". You see, it turns out El Diablo could not get a straight answer from Adobe Technical Support reg
arding what seemed like an incredibly simple question. So after endless attempts to get this question answered, he went quite insan
e and started kidnapping Guinea Pigs with the diabolical plan of starting his own software support company run by Guinea Pigs as the
y could not possibly offer worse support than he had been receiving. Alas, if someone had only just replied to his futile queries i
n a precise and meaningful fashion. But they did not. And so the Guinea Pigs - they must suffer. To be continued?
Notes to Customer
Wednesday, March 21, 2012 1:06:19 PM PDT
Hi Christopher ,
Thank you for contacting Adobe Technical Support. We are responding in
reference to your case regarding Adobe Premiere Pro .
We would be happy to assist and assure you with the best possible
assistance regarding the case.
We also tried calling you at 01:05 pm PST but you were not available
.So please feel free to get back to us or if you would like us to give
you a call as per your availability ,please let us know of an
appropriate time to call.
Would like to know how you were able to edit the audio and the video
less than a frame in the earlier versions of adobe premiere pro.
You can also visit www.adobe.com/go/supportportal for any assistance
regarding Adobe products. You may also visit www.forums.adobe.com as
it?s a useful resource for self-help.
We are always here to assist you. Please contact us at 800 833 6687 IVR
Options 2-3 if you have any questions or need an update on your case.
Thanks & Regards,
Anish
Adobe Technical Support
Notes from Customer
Tuesday, March 20, 2012 11:21:19 AM PDT
REALLY? I spent an hour on the phone with your top support people and you still can't give me a definitive answer on this unless I
post in other forums? WHAT is so hard about answering this simple question? Thank you!
Please confirm that it is currently IMPOSSIBLE to edit audio or video in Premiere Pro 5.5 to measurements LESS THAN 1 frame.
Notes to Customer
Monday, March 19, 2012 3:36:49 PM PDT
Hi Christopher ,
Thank you for contacting Adobe Technical Support. We are responding in
reference to your case regarding Premiere Pro .
We would be happy to assist and assure you with the best possible
assistance regarding the case.
We also tried calling you at 03:35 pm PST but you were not available .So
please feel free to get back to us or if you would like us to give you a
call as per your availability ,please let us know of an appropriate time
to call.
You can also visit www.adobe.com/go/supportportal for any assistance
regarding Adobe products. You may also visit www.forums.adobe.com as
it?s a useful resource for self-help.
We are always here to assist you. Please contact us at 800 833 6687 IVR
Options 2-3 if you have any questions or need an update on your case.
Thanks & Regards,
Anish
Adobe Technical Support
Notes from Customer
Sunday, March 18, 2012 8:12:20 AM PDT
Please confirm that it is currently IMPOSSIBLE to edit audio or video in Premiere Pro 5.5 to measurements LESS THAN 1 frame.
It appears in versions prior to CS5.0 one could select AUDIO UNITS by right clicking timecode display to edit audio (and presumably
video for that matter) to SAMPLE RATE accuracy.
Despite a long and involved support phone call including taking control of our computer by remote, it appears this is NOT currently
possible.
If this is indeed so - we will have to adjust our work flow to edit audio OUTSIDE of Premiere.
Thank you...please confirm and advise.

Thank you for your input.
YES - I've seen the "right click Time Code display and switch to audio units timeline solution - yet audio units do NOT appear as an option for me...hence all of this drama.
ADOBE - do I have a munged install? Any other advice? We keep a clean system (Mac Pro 10.6.11 or whatever is last iteration of SL). I guess I could try installing into a new User and see if it behaves any differently.
Sigh...we bailed on FCP7 after trying FCPX and also passed on going to Avid MC. Hope PP is reliable for our work flow...again thx for all help.
PCG

Rookie needs rules of thumb re: P-Pro or Soundbooth to edit audio of a video?

Hello, I'm a rookie having just purchased the CS5 Master Collection and I'm editing the video of my first skydive last week. I want to add an mp3 music track to the freefall section etc.
I've watched most of the Lynda.com "essential training" videos for both Premiere Pro and Soundbooth, but I'm still wondering which application would be best.
What are some basic guidelines or rules to decide where to edit the audio for a video? For this project, all I need to do is make the mp3 audio track start about a minute into the video and I also want to take (copy) a few short sections of the audio and insert them in different spots. Other than changing the volume level of the music at different points (which is explained pretty well in the Lynda.com tutorials), nothing really that fancy.
Thanks!
Edit: Oops! I just thought of another question: how do I convert the video file so I can play it on a Blu-Ray/DVD player and big screen TV? Right now, I can only play the DVD/video the skydiving folks sent to me on my PC.
Here is what P-Pro says about the file:
Name: "VTS_01__1.VOB
Movie, 740 x 480 (0.9091)
29.97 fps
480000 Hz-Compressed-Stereo

Thanks for your response, Bill!
I expect my 5.5 upgrade in a few days, so it's good to hear Audition is coming! (But now I have to forget what I learned in Soundbooth? ;-) )
I don't know how to convert an mp3 to PCM/WAV or even what that is (I do know what a .wav file is, however), but I'll look into it. But how can a mp3 go to a larger .wav file? I get how an .mp3 is made by reducing the samples and file size, but how can you go the other direction?
On the other hand, the "Instant HD" software you mentioned must be doing something similar with video in taking a smaller file and making it HD, right? So, does this mean I have to invest another $100 to make camcorder videos play on my Blu-Ray/DVD player? Dang, my wallet is gettin awful light these days, but it sure would be cool to watch my jump on the big screen, you know?! Will it look good after conversion or will it be a bit pixelated?
And don't worry about me: even though going skydiving again is all I think about (WARNING!: Like bungee jumping, it's habit forming!), that wallet I mentioned is keeping me safe and warm in front of my PC!

Adobe Captivate 6 -- Adding audio to video

Hello --
How do I add audio to a video I imported into Adobe Captivate 6? The videos actually already have audio, but I would like to record over them with my voice.
Thank you!
Ryan

Thank you!
Von: RodWard [email protected]
Gesendet: Montag, 20. August 2012 18:47
An: Scharfer, Ryan
Betreff: Adobe Captivate 6 -- Adding audio to video
Re: Adobe Captivate 6 -- Adding audio to video
created by RodWard<http://forums.adobe.com/people/RodWard> in Adobe Captivate - View the full discussion<http://forums.adobe.com/message/4634171#4634171

Adding audio to edited video

Similar Messages

Maybe you are looking for