Adding audio without video

When I drag in an audio clip iWeb sees it as a video clip and wants to add a photo. Does anyone have a way to add audio only without making it an .mov file?
Thanks!

There are some other ways of displaying your tracks...
http://www.iwebformusicians.com/MusicPlayers/MP3iFrame.html
Method 1 helps to stop people stealing your tracks.
If you insist on using QT for music tracks, make sure you give the download link as a lot of PC users don't have QuickTime Player installed.
See...
http://www.iwebformusicians.com/MusicPlayers/QT.html

Similar Messages

Recording audio without video

Is there any way to record live audio from a mic and
streaming it through FMS without having to have a webcam plugged
in? Is there way to use another video source other than a webcam,
such as an existing flv?
thank you.

Sure... you can record audio without video. It's the same as
recording both... just don't attach the camera to the netstream.
As for adding another video image... that one you can't do.
You can only play once source over a stream, so video from one
source and audio from another can't be played across a common
stream.

Video files are playing audio without video (just a black screen)

Video files are playing audio without video. It just shows a blank screen. These same videos work just fine in Chrome, thogh.

Try to disable hardware acceleration in Firefox (you need to close and restart Firefox).
*Tools > Options > Advanced > General > Browsing: "Use hardware acceleration when available"
*https://support.mozilla.org/kb/Troubleshooting+extensions+and+themes
You can check for problems with current Flash plugin versions and try these:
*disable a possible RealPlayer Browser Record Plugin extension for Firefox and update the RealPlayer if installed
*disable protected mode in the Flash plugin (Flash 11.3+ on Windows Vista and later)
*disable hardware acceleration in the Flash plugin
*http://kb.mozillazine.org/Flash#Troubleshooting

Adobe Captivate 6 -- Adding audio to video

Hello --
How do I add audio to a video I imported into Adobe Captivate 6? The videos actually already have audio, but I would like to record over them with my voice.
Thank you!
Ryan

Thank you!
Von: RodWard [email protected]
Gesendet: Montag, 20. August 2012 18:47
An: Scharfer, Ryan
Betreff: Adobe Captivate 6 -- Adding audio to video
Re: Adobe Captivate 6 -- Adding audio to video
created by RodWard<http://forums.adobe.com/people/RodWard> in Adobe Captivate - View the full discussion<http://forums.adobe.com/message/4634171#4634171

Adding audio to Video Demo: Captivate 7

Hello, i have several questions about working with audio in a video demo in Captivate 7.
I have a video demo that was captured without audio, then the intended script changed signifigantly so the timing is way off (sometimes the video doesn't hold on a screen long enough for the narrator to finish talking, sometimes it holds too long).
Any tutorials out there for adding audio after the video demo is recorded, when the timing is all off and I need to hold on some frames longer than the movie does? I'm doing still screen grabs and inserting them as images for the duration of the hold, but there's got to be a better way!
Is there any way to add text-to-speech in the Video Demo (other than adding it in slide notes, exporting the audio file and then importing it to the background of the video demo?)
When adding audio to a Captivate 7 video demo, is it better to add it to the video (Edit Video Demo > Audio > Import to > Background) or to add it to the slide in the regular timeline? Pros/Cons? Best practice?
Thanks!

Are you un-checking "Edit Volume" before you play it?
Sue
Hi Sue, Thanks for your help, I am new to the Mac, so forgive me if I am slow!
I cannot find "Edit Voume".
I can find "Show clip volume" in the "View menu" is that the same thing?
Thanks for your help. Chatch

Adding Audio and Video Content to EPUB from InDesign CS5.5 | CS5.5 Design Premium Feature Tour | Adobe TV

In this episode, Colin Fleming shows how simple it is to embed audio and video content in InDesign CS5.5 for export to EPUB.
http://adobe.ly/xT0jKh

I have placed audio and video into InDesign. I did it just exactly the way this video told me. Everything works well in the preview panel. However, when I exported it to EPUB, the file of the EPUB is so small (I guess, it should have been larger because I had added video and audio file into it). Plus, When I open it in EPUB reader (ibook) and Adobe Digital Edition, It shows nothing.
What I want to do is to create an EPUB which contains image, and sound. I want to make the image as a button which plays sound when I click it. I did it by setting he button to play when clicked, but again, it is not showing at all when published to EPUB.
I hope that there will be a good solution to this matter.
Thank You.

Adding audio to video

I captured separate files for audio and video in Final Cut Pro and now I want to join them in iMovie '08.
The video imported correctly but when I try to drag or import the audio file, iMovie says the "file is not compatible with iMovie". The audio kind is QuickTime Movie (.mov) and the Codec is Integer (Big Endian).

The video imported correctly but when I try to drag or import the audio file, iMovie says the "file is not compatible with iMovie".
if audio is iMovie '08 compatible, transfer it to iTunes and access it in iMovie '08 via the iTunes browser.

I would like to see a built-in way of adding audio and video files.

As it is, you have to rely on third-party solutions for adding mp3 audio files and video to Muse sites. Thanks

Hi,
I tried to reproduce what you were getting by building a simple VI but I havent had much luck (I have attached the VI).
Could you post your code so that I can take a look at it?
Feroz P
National Instruments
Attachments:
Graph.vi ‏39 KB

Import audio WITHOUT video

Hi there,
I am working on an iMovie 09 project and I can't manage to use only the audio of a clip without the video. I can dettach the audio and move it around, but if i delete the video clip, the audio disappears also ...
Anybody a clue?
Thanx,
iMatt+

Hello, hillguydc,
Welcome to the discussions.
For what you are trying to do, use iMovie 6. If you had it before installing iLife 08, it is in your Applications folder, iMovie(previous version). In iM6, what you want to do is under the 'Advanced' menu option...to 'Paste Over at Playhead.' You want to paste your photos over the video and keep the audio going.
If you open iMovie HD, see if you still get its Help files, and not iMovie 08's and you will find the step-by-step instructions. If you cannot find it, here it is:
I+nserting video clips or photos in a passage while maintaining running audio:+
+You can paste a new video clip or photo over an existing clip while retaining the audio from the original clip. The video cuts away to a new picture, but you continue to hear the sound from the original clip.+
+To replace images in a clip while maintaining running audio:+
+Choose iMovie HD > Preferences, and then click General.+
+Select the "Extract audio when using Paste Over at Playhead" checkbox.+
+Select the video or photo that you want to insert.+
+Choose Edit > Cut or Copy.+
+Do one of the following:+
+To paste the entire video you selected in step 3, position the playhead at the first frame to be replaced. When you paste the clip, it will replace a portion of video equal to its length.+
+To paste over a specific segment of your movie, select the part of the video clip you want to paste over.+
+If the video you're pasting is longer than the selected frame range, the excess video will not be pasted. If the video you're pasting is shorter than the selected frame range, the extra space will be filled with a color clip (or the still image, if you paste a still image).+
+Choose Advanced > "Paste Over at Playhead."+
+The audio track of the original video is retained and appears in audio track 1 of the timeline viewer.+

Apple Keynote Plays Audio Without Video

http://events.apple.com.edgesuite.net/0901ouabdcaw/event/index.html

I have varying problems with watching Keynote addresses. The worst being video breakup not to mention audio breakup. Frankly I fail to understand why Apple don't allow the video to be downloaded so that you can watch it cleanly rather than waiting for it to buffer and mess around the way it does. It ends up being hopeless to watch because you need significant bandwidth.
Chris

Can i airplay audio without video?(Airport Express)

What happens if i want to listen audio from my streo but watch from ipad? Can i do that? Airport doesn't have video out.

ON the express there is a 3.5 mm audio output jack which u connect to your stereo using RCA cords this will allow u to play and view whatever want on your ipad and output sound through your stereo.

Audio without Video

I just updated to the latest flash player and cannot see my
streaming video. The site works as I can see it on another PC. In
IE or Firefox when I open the link the audio plays but I don't get
get the video just a blank screen.
I have run the uninstaller and reinstalled. I see the flash
object from the install page fine.
http://shows.ctv.ca/2007/ this
is the video I'm trying to view.

This sounds similar to another post that I recently answered.
Check this thread; maybe you're running similar software?
http://www.adobe.com/cfusion/webforums/forum/messageview.cfm?catid=194&threadid=1316605&fo rumid=15

Re: Adding Audio To Video

Well i can think of only the data source type problem causing a IncompatibleSourceException.
Anyways post your code here.

Yes, you were right. The Exception IS a NoPlayerException. Basically I end up with a DataSource with a content descriptor of application.mixed which it can't find a player for. Which I guess is understandable. I'm not sure it's necessary, but my code is below
import javax.swing.*;
import java.net.*;
import javax.media.*;
import java.awt.Component;
import java.beans.Beans;
import javax.media.bean.playerbean.MediaPlayer;
import javax.media.protocol.DataSource;
public class MediaPanel extends JPanel{
     DataSource m_dataSourceVideo;
     DataSource m_dataSourceWav;
     DataSource m_dataSourceFinal;
     DataSource[] m_adataSourceArray;
     MediaPlayer m_playerMaster;
     Player m_playerMedia;
     Component m_componentVideo;
     boolean m_bIsVideo;
     boolean m_bIsWav;
     MediaPanel() {
          try {
               ClassLoader cl = this.getClass().getClassLoader();
               m_playerMaster = (MediaPlayer)Beans.instantiate(cl,"javax.media.bean.playerbean.MediaPlayer");
          catch(Exception e) {
               System.out.println("Can't create MediaPlayer");
               System.exit(0);
     public void LoadWav(URL urlWav) {
          m_bIsWav = false;
          try {
               m_dataSourceWav = Manager.createDataSource(urlWav);
          catch(Exception e) {
               m_bIsWav = false;
               System.out.println("Can't load Wav");
          m_bIsWav = true;
     public void LoadVideo(URL urlVideo) {
          m_bIsVideo = false;
          try {
               m_dataSourceVideo = Manager.createDataSource(urlVideo);
          catch(Exception e) {
               m_bIsVideo = false;
               System.out.println("Can't create Video");
          m_bIsVideo = true;
     public void PlayMedia() {
          m_playerMaster.setPlayer(m_playerMedia);
          if(m_bIsVideo) {
               if((m_componentVideo = m_playerMedia.getVisualComponent()) != null) {
                    add(m_componentVideo);
               repaint();
               m_playerMedia.start();
     public void SetMedia() {
          if(m_bIsWav && m_bIsVideo) {
               // We have both, need to merge them
               System.out.println("Calling Merge");
               MergeMedia();
               try {
                    m_playerMedia = Manager.createPlayer(m_dataSourceFinal);
                    return;
               catch(Exception e) {
                    System.out.println(e.getMessage());
                    System.out.println("Can't create player from DataSource");
          else {
               if(m_bIsWav) {
                    m_dataSourceFinal = m_dataSourceWav;
                    return;
               if(m_bIsVideo) {
                    m_dataSourceFinal = m_dataSourceVideo;
                    return;
     public void MergeMedia() {
          DataSource[] m_adataSourceArray = {m_dataSourceWav, m_dataSourceVideo};
          try {
               m_dataSourceFinal = Manager.createMergingDataSource(m_adataSourceArray);
          catch(Exception e) {
               System.out.println(e.getMessage());
               System.out.println("Merging failed");
}

Adobe Presenter - audio and video

Could someone please tell me the difference between adding
audio and video to a PP presentation via PowerPoint vs. importing
and adding audio and video using the Presenter tab?
Also, I'm looking for a list of things that won't work when
publishing. For example, I noticed that animations, slide
transitions and QuickTime movies won't work after publishing.
Thanks SO much.
Leona

Check out the documentation on Presenter -- there are some
very specific ways you need to add audio (use "Record Audio" or
"Edit Audio" in the Presenter menu) and video (use "Insert video"
in the Presenter menu).
Powerpoint has facilities to do these things as well, but
Presenter won't be able to publish them, from what we've
determined.
For animations, again, read the documentation carefully --
all your animations have to be set to "On Click" or "With Previous"
-- i.e., they can't be timed animations. Again, Presenter won't be
able to translate these timed animations -- you must "click" them
into view (you do this as you're recording audio with "Next
Animation", or you can do it after recording audio using
"Synchronize Audio").

Seperate audio and video.

How do you seperate an audio clip from the video clip before you import it into your project. Any and all help is greatly apprciated

If what you're asking is how to select video without audio or audio without video from a clip in your Browser and bring only that element into your timeline, just click the tab(s) in the patch panel area at the left end of the timeline to disconnect the element of the clip (audio or video) you don't want to use. Then bring the clip into your timeline in the usual way.

Adding audio without video

Similar Messages

Maybe you are looking for