Adding "author" name in iWeb
I mistakenly omitted the Author name when I submitted my feed. I am using garageband-to iWeb and then publishing to iTunes. How do I get the iTunes store listing to show my author name instead of "Unknown". I know how to make the changes in garageband, but the name still comes up as "Unknown" The podcast is here: http://www.westcoastproject.com/westcoastproject/FargoTV/rss.xml
thanks!
You have 'itunes;author' tags within your episode tags (where they don't do you any good) but not in the top part of the feed. The two existing tags are different:
<itunes:author>Michael Mack & Michelle Brock</itunes:author>
<itunes:author>Michael Mack</itunes:author>
Have you got anything entered here:
Similar Messages
-
i had added books to iBooks on iTunes and synced with my iPad mini. Then I realised that the titles sometimes had the author name, or a random number before it. I made changes to all the books in my iTunes library, edited the titles, added authors to the author columns, year in year column etc and synced my iPad again. but my iPad did not update these changes at all is still in the old way. can this be rectified?
Have you tried closing the iTunes store app via the multitasking bar and seeing if it works when you re-open it
Have you tried closing the app via the taskbar ? (I assume that your iPad is on iOS 6, though the version that your tagline shows, 6.1.6, is not a version for iPads) From the home screen (i.e. not with iTunes store app 'open' on-screen) double-click the home button to bring up the taskbar, then press and hold any of the apps on the taskbar for a couple of seconds or so until they start shaking, then press the '-' in the top left of the iTunes app to close it, and touch any part of the screen above the taskbar so as to stop the shaking and close the taskbar.
If that doesn't fix it then you could try a soft-reset : press and hold both the sleep and home buttons for about 10 to 15 seconds (ignore the red slider), after which the Apple logo should appear - you won't lose any content, it's the iPad equivalent of a reboot. -
Change author name in properties
I have a PDF created by someone else and I need to anonymise it before sending it on. This means I need to change the author information in the document Properties, but although I can click the author name and highlight it, I can't change it. Has anyone come across this? Does anyone have a solution other than going back to the original author, who presumably would be able to change it?
Hi alisons68876995,
You might need to try this out:
Go to "Edit> Preferences> Commenting" and disable "Always use log-in name for author name" option.
Then, make a comment in the PDF and once done, go to Comment properties (Click on options in the comment pop-up) and the choose 'General' to choose the author name.
Now, accept the changes, click on options again and choose 'Make properties default'.
Now, adding a new comment will now include your name.
Please check and then let me know.
Regards,
Anubha -
Change author name in my pdf files?
It wont allow me to change the author name in my pdf files. Why not. How can I change it? It wont allow me in 'my preferences' or anywhere else. Not even in the document properties box.
Hi alisons68876995,
You might need to try this out:
Go to "Edit> Preferences> Commenting" and disable "Always use log-in name for author name" option.
Then, make a comment in the PDF and once done, go to Comment properties (Click on options in the comment pop-up) and the choose 'General' to choose the author name.
Now, accept the changes, click on options again and choose 'Make properties default'.
Now, adding a new comment will now include your name.
Please check and then let me know.
Regards,
Anubha -
I just completed a website in iWeb08 for a teacher that uses the podcast template and she wants me to submit it to iTunes. When I started looking at this process, it tells me that the author is "none." Where does it get the AUTHOR from in iWeb and can it be changed without knowing xml?
Mikein iWeb, select the site in the Site Organizer bar on the left of the page.
Then make sure the Inspector is visible. If not, click on the button at the bottom of the window to make it appear.
In the inspector window, select the RSS button.
Here you will find the Series Artist name field. Use this.
You may also have to go individual podcast entries to update them as well, for the first republishing of the site. -
IWork Pages Default Author Name
Everytime I create a new document on the Pages app (Ipad 2) and export to .epub file with "open with/Epub", in the Epub information, the author name field is already filled with a name other than mine. How can I change this default name?
Thank you for replying. However, the reply is about adding a comment to a PDF, not the author of the PDF document itself.
The Author is seen by opening up the PDF file itself, and then File > Properties. You can see a screen shot below.
When this pop-up screen is open, you can manually change the name of that author for that one document. However, I can't figure out how to change the name that Adobe uses by default (for example, I want the Author to be just my first name, not the entire name I used when I installed the product (which is what I changed it to for this one document)).
How do I change the default Author name?
Thank you
Jason -
Revision: 4286
Author: [email protected]
Date: 2008-12-10 18:29:26 -0800 (Wed, 10 Dec 2008)
Log Message:
Bug: BLZ-282: added property name to debug info for Map serialization
checkintests: pass
Ticket Links:
http://bugs.adobe.com/jira/browse/BLZ-282
Modified Paths:
blazeds/trunk/modules/core/src/flex/messaging/io/amf/Amf3Input.javaGuo,
I see a question mark in the sql statement, instead of the Oracle-style bind parameter notation which would be ":1". Can you change your VO to use Oracle-Style bind params and see whether it works?
Steven Davelaar,
JHeadstart Team. -
4.0 Webi Report Author name change
Hi Gurus,
I want to change the Intial Report author name to new report Developer name in SAP BO 4.0. I have tried with Save as option but this couldn't help me.
Can you please let me know, how we can change the Webi Report author name ?
Best Regards,
SaiHi Mahi,
Thank you for your kind information.
I’m not sure how I can implement this Java script since I have never worked on the JAVA sdk.
Could you please let me know step by step how I can implement this ?
Best Regards,
Saidi Reddy -
Author name changing 9.0 Pro
Using 9.0 Pro - recently had to change from XP to 7.
Initially started learning 7.0 with Account name of David - no special security.
Then as I get more knowledgeable in Win 7 and IAW recommendations I set up an "Administrator" account with PW of "Dr. XXXXX" that allows me access to everythhing, but also allows malicious folks in also. Win 7 recommendation was to also have a non-secure account for everyday less-sensitive tasks so I did this also with the PW of "Dr. XXXXX".
Naturally I want to use the Dr. XXXX in my Stickies for professional clout, but Acrobat insists on using David.
Yes, I know about the tick-mark under "properties" where I can specify that my ID in the stickie is to be my log-in name. Yes, I have tried unchecking, rebooting, re-checking, rebooting, etc. Acrobat refuses to use eith my "administrator" or my non-secure name of Dr. XXXX. Frustrating.
Any suggestions?
Thanks,
NeptuneHi Bill - thanks for the response.
I am now beginning to "cone in" a bit am better able to describe the
problem:
1. As I stated at the start, I am using Acrobat 9.0 Pro and Win7
2. As I go to: Edit...preferences...commenting...making
comments...(checkbox) Always use log-in name for author name.
Whether or not this box is checked or unchecked the result is the same:
I go to Sticky Note on the taskbar, place it on the page, go to
Options...properties...general...author I find "David". Yes, I can change
the Author Name, but whether or not I further check the box, "Make
properties default" thr result is the same - that one sticky will have the
correct "Dr. XXXX" but the next sticky, as well as subsequent PDFs once
again default to "David.
3. Thanks to ***** (whose four links all quite happily referred me to the
Acrobat X page (I clearly stated 9.0 Pro) then quoted a generic OS (rather
than my clearly-stated Win 7) I finally figured out the problem when I
accessed the 9.0 Pro help in the far right lower corner of the Acrobat X
page. Dumb of me, I admit but I had tried this initially in my own program
"help" without really understanding what was happening.
SO HERE IS PART OF THE ANSWER: The overall basic "author" information
appears to reside in Edit...Preferences...Identity...Login Name (type-in
box) David. Now the fun part. I am unable to change the Log-in name and thus
am unable to change the sticky note. When I try to change the Log-in name I
get a cheery tone, a blinking box, and no was to change David to Dr. XXXX.
Well, it does seem that once I can change the ...Identity...log-in name I
should be able to change the sticky PERMANENTLY.
So I apologize if I have seemed a bit grouchy, and I do appreciate those of
you who have tried to help, but it does get frustrating when those trying to
help express a solution that uses totally unrecognized words, or do not get
even the Adobe product correct, or the OS...
SO - now the underlying problem is defined. ...
USING WIN 7 AND ACROBAT 9.0 PRO, HOW DO I CHANGE THE LOGIN NAME UNDER
EDIT...PREFERENCES...IDENTITY if I am not allowed access?
Again - apologies to all, but the time I have spent...
Neptune -
Adding file name in the sender Adaptor
Hi ,
I am facing some problem in adding file name .
The scenario is like this :
The file needs to be send from on system and needs to be Archived . Once processed, the archived file should be prefixed with ARCH_ so that it is not picked up again .And the other thing given is the file name used will be of the format XXX_YYY_nnnnnnnnnn.DAT where nnnnnnnnnn is the date stamp .
Please help it's urgent ......
Thanks and regards
AnitaHi,
if you can have XML achvived files you can use
standard
processing mode: Archive
with one swich you can set the timestamp mode
yyyMMdd-hhMMss-SSS_.
ref
http://help.sap.com/saphelp_nw04/helpdata/en/e3/94007075cae04f930cc4c034e411e1/content.htm
Regards,
michal -
Need help creating a script to read the name of a folder (which is the AD Username) and adding that name into the permissions of that folder.
I have over 100 folders which I need to add the AD user to read and write to their own folder
Hope you guys understand what I meanJust to add, Mac in intergrated into AD and all I need is help in creating the script
Thanks -
Create Annotations with 'author' name tool property
Philip Cord has kindly sent me this code that allows to create annotations with the "Author" tool property (older versions than CS3 couldn't get this on script listener - only on the CS3 script listener).
Hope it helps anyone like me that can't have access anymore to CS3
var colour = new SolidColor();
colour.rgb.hexValue = 'ff00ff';
selectNote(0);
colourNote(colour);
addAuthorToNote("Author Name");
function colourNote(colour) {
var Saturation = colour.hsb.saturation;
var Brightness = colour.hsb.brightness;
var Hue =colour.hsb.hue;
var desc = new ActionDescriptor();
var ref = new ActionReference();
ref.putEnumerated( stringIDToTypeID('annotation'), charIDToTypeID('Ordn'), charIDToTypeID('Trgt') );
desc.putReference( charIDToTypeID('null'), ref );
var desc2 = new ActionDescriptor();
var desc3 = new ActionDescriptor();
desc3.putUnitDouble( charIDToTypeID('H '), charIDToTypeID('#Ang'), Hue );
desc3.putDouble( charIDToTypeID('Strt'), Saturation );
desc3.putDouble( charIDToTypeID('Brgh'), Brightness);
desc2.putObject( charIDToTypeID('Clr '), charIDToTypeID('HSBC'), desc3 );
desc.putObject( charIDToTypeID('T '), stringIDToTypeID('annotation'), desc2 );
executeAction( charIDToTypeID('setd'), desc, DialogModes.NO );
function selectNote(number) {
var desc = new ActionDescriptor();
var ref = new ActionReference();
ref.putIndex( stringIDToTypeID('annotation'), number );
desc.putReference( charIDToTypeID('null'), ref );
try{
executeAction( charIDToTypeID('Shw '), desc, DialogModes.NO );
}catch(e){}
function addAuthorToNote(Author) {
var desc = new ActionDescriptor();
var ref = new ActionReference();
ref.putEnumerated( stringIDToTypeID('annotation'), charIDToTypeID('Ordn'), charIDToTypeID('Trgt') );
desc.putReference( charIDToTypeID('null'), ref );
var desc2 = new ActionDescriptor();
desc2.putString( charIDToTypeID('Athr'), Author);
desc.putObject( charIDToTypeID('T '), stringIDToTypeID('annotation'), desc2 );
executeAction( charIDToTypeID('setd'), desc, DialogModes.NO );
function makeAnnotation(X,Y,Width,Height) {
var desc = new ActionDescriptor();
var ref = new ActionReference();
ref.putClass( stringIDToTypeID('annotation') );
desc.putReference( charIDToTypeID('null'), ref );
var desc2 = new ActionDescriptor();
var desc3 = new ActionDescriptor();
desc3.putUnitDouble( charIDToTypeID('Hrzn'), charIDToTypeID('#Pxl'), X );
desc3.putUnitDouble( charIDToTypeID('Vrtc'), charIDToTypeID('#Pxl'), Y );
desc2.putObject( charIDToTypeID('Lctn'), charIDToTypeID('Pnt '), desc3 );
var desc4 = new ActionDescriptor();
desc4.putUnitDouble( charIDToTypeID('Hrzn'), charIDToTypeID('#Pxl'), Width );
desc4.putUnitDouble( charIDToTypeID('Vrtc'), charIDToTypeID('#Pxl'), Height );
desc2.putObject( charIDToTypeID('Sz '), charIDToTypeID('Ofst'), desc4 );
desc2.putEnumerated( stringIDToTypeID('annotType'), stringIDToTypeID('annotType'), stringIDToTypeID('annotText') );
desc.putObject( charIDToTypeID('Usng'), stringIDToTypeID('annotation'), desc2 );
executeAction( charIDToTypeID('Mk '), desc, DialogModes.NO );This is a bit more robust (it won't fall over if you have no images open or can't find the corresponding image) I've made it so if you have the thumbnail image open it will find the mannequin image and visa versa. Save the script to your PS scripts directory. In photoshop record an action that uses the script. Stop recording! Then you can run the script as an action.
app.preferences.rulerUnits = Units.PIXELS;
if (documents.length == 0)
alert ("No documents open, dude!")
else
var dir1 = "Mannequin";
var dir2 = "Thumbnails";
// call the current document
var tempDoc = app.activeDocument;
// get the info out of the source doc
var fileName = tempDoc.name;
var filePath = tempDoc.path.toString();
var fileNameAndPath = filePath + '/' + fileName;
var tempDir = filePath.substring(filePath.lastIndexOf("/") +1, filePath.length);
var goCode = false;
var docName = fileName.substring(0,fileName.length -4);
if (tempDir == dir1)
var otherImagePath = filePath.substring(0, filePath.lastIndexOf(dir1));
var tempFile = decodeURI(otherImagePath + "/" + dir2 + "/" + fileName);
goCode = true;
if (tempDir == dir2)
var otherImagePath = filePath.substring(0, filePath.lastIndexOf(dir2));
var tempFile = decodeURI(otherImagePath + "/" + dir1 + "/" + fileName);
goCode = true;
if (tempDir != dir1 && tempDir != dir2)
alert("Cannot find matching image.")
goCode = false;
if (goCode)
//open the other image
var fileRef = new File(tempFile)
if (fileRef.exists)
app.open(fileRef);
else
alert("Matching file does not exist.")
}// end doc check
Hope this helps. -
How to remove author name and/or date from blogsite summary
Hello,
Can someone please help me find how and where to remove the author name from the blogsite summary?
I don't want any author name listed, just the linked title of the blog post and the date posted.
Or, is it possible to have the linked title, with 50 words of article displayed, but no author name or date created?
Thank you very much in advance!Yes, thank you.
The site is still temporary: http://sculpturebythelakes.businesscatalyst.com/index.html
The "Latest News" box on the right hand column.
Ideally, I would like a linked post title, a return <BR> and then a set quantity of words below with "read more" following.
It seems there should be a template to edit, but I've gone through everything I can find in BC backend, and looked at every tutorial I can find (they are all very general, just getting started stuff) and can't figure it out.
Any help is greatly appreciated. -
APEX application version, author name and date (history)
Hello,
I have created few application in APEX ,I want to add version, author name and date for that application's.
Please help wherein I can enter in APEX like in Oracle form (pre-form trigger we can add.)
Thank you in advance.
Regards,
Gaurav Nagpal.Hi,
I have never used Forms, so I'm not exactly know what you mean.
But APEX application definition have version attribute that you can use.
http://docs.oracle.com/cd/E37097_01/doc/doc.42/e35125/bldr_attr.htm#CHDGJHDC
And you can add author and date to e.g. application comment
http://docs.oracle.com/cd/E37097_01/doc/doc.42/e35125/bldapp_comment.htm#CHDBGHJG
Regards,
Jari
My Blog: http://dbswh.webhop.net/htmldb/f?p=BLOG:HOME:0
Twitter: http://www.twitter.com/jariolai -
Save as PDF - Change Author Name?
In any application when you go to Print, Save as PDF is there any way to change the default author name it already has written there?
Unfortunately, that's not the answer that anyone is looking for. It's not changing the author name that is desired, but changing the author name that comes up by default when you save as PDF so that you don't have to select the author field and change it from your username. The goal is to remove steps, not to add steps.
Maybe you are looking for
-
The only place I use my Ipod Touch is in my car that has an iPod connection and the steering wheel controls, but I mostly listen to audio books with the audible app. Everytime I get in my car instead of the iPod just picking up where it left off with
-
Itunes wont disable disk usage
Ok so heres the deal: I just upgraded to a new desktop that runs under windows vista and thought that moving my old library to this new computer would be a snap. I checked out this site for directions on using my 30g classic as a hard drive to make t
-
Problem facing in saving the workflow
Hi all, I have done some changes to the existing workflow..and i have save the workflow in the data base as using save as option in workflow builder...but the modification are not refllected in the work flow after saving.. what might be the reason ..
-
Ive downloaded csk6 design and web premium trial its asking for serial number
I've downloaded cs6 design and web premium trial its asking for serial number, WHERE DO I GET SERIEL NUMBER FOR TRIAL
-
Please Help! iMovie stopped rendering clips!!
I am halfway finished with a movie and suddenly for no apparent reason clips that I import are not rendering. I have tried many different clips, but every time the bar appears and never moves at all. I have imported many pictures into this movie whic