Adding bleed and trim lines with Pages?

Hi - I a designing a book with Pages. The printing company wants trim and bleed lines to show in the final pdf. How do I add trim and bleed lines to each page in Pages? Also, they want fonts embedded. Does this happen automatically when crreating the PDF?

Already checked that, Twitch. All the check boxes you mentioned already unchecked.

Similar Messages

  • Bleeds and Trim Marks

    So I am desinging a business card for a company I work for. The company we are sending them off too obviously needs to have the bleed and trims marks. The only thing I can't figure out is how do I make the bleed marks visible to them? When I print the document it shows me the trim marks but since I have a white background, it looks as if there is no border. Should I add a border to the actual Artboard?

    You can use the automated marks
    If you want to draw your own trimmarks
    file >> document setup>> set the bleed amount - you will see a red line showing you where the bleed ends

  • I'm using a pc, (windows 8.1,) and I cannot get a thick and thin line with CS6. None of the brush tool settings have any effect, even in the preview. Is there a setting I need because I'm using a pc?

    I'm using a pc, (windows 8.1,) and I cannot get a thick and thin line with CS6. I want to draw, but I cannot get any linework like I should. I also use Sketchbook Pro, and ToonBoom, and I get wonderful linework. But not with Photoshop.
    None of the brush tool settings have any effect, even in the preview. Is there a setting I need because I'm using a pc and not a mac?

    Thanks for your response,
    I'm using a Fujitsu T901 laptop, with a stylus pen. Painting works great in Photoshop, but for drawing there is no sensitivity at all.  Frans Vischer
    author and illustrator of Fuddles, A Very Fuddles Christmas and Jimmy Dabble
    www.fransvischer.com
    pamperedfatcat.wordpress.com

  • Bleed and crop lines

    Hi all,
    Just wanted to know if/how one can set the bleed and crop marks in pages.
    I'm using the trial and would like these features to print artwork that bleeds off the page.
    Thanks,
    naj

    hi frank,
    thanks for the tip, its a shame however that such a well designed piece of software lacks such a simple feature.
    I sure hope apple implements it in the future.
    You see what I need this for is that I'm working on a comic book. I'd like to be able to produce a PDF that would be suitable to be used by a printer/pod printer. So crop marks and bleed are quite important.
    Your suggestion is a very nice and simple workaround that I will probably end up using. I'll have to get all the details on whats needed by the printer tho - I'm a newbie to this whole industry you see, more of a hobby really.
    have you any other suggestion that might help my cause in light of that?

  • Bleed and crop marks in Pages '09

    Need to export pages document as PDF with bleed and crop marks, HOW do I do that?
    The printer needs to have bleed in the document to be able to crop.

    Hi Daniel,
    Welcome to the forum.
    Pages does not have bleeds, crop marks nor slugs.
    You will need to increase the page size all round by 3/8" or 10mm and add them as 100% cmyk rules to the corners.
    Best done in Word Processing mode with the crops as master objects so they appear on every page.
    Crude, primitive and harking back to what I had to do back in the 80's and early 90's, but Pages seems to be in a time warp.
    Peter

  • Success and Step Forward - with Pages

    I have been in the process of writing a book, and having done most of the preliminary writing in Nisus Writer (Classic) OS 9. Then when I made the switch to OS X about 14 months ago I decided to put it into MS Word 2004. Generally it went well. But I had about 100 pages of photos to insert at various places through the book (making 300+ pages). That made me nervous attempting that with Word.
    About two months ago I decided to try Pages for the photo layout alone. After a while I got the hang of it, and completed almost all photos (I still have cropping and layout for 30 photos) this past week. Then as an after thought I opened a copy of the Word document (I always use a copy!) in Pages. It opened almost perfectly, headers, footers (no footnotes, endnotes or bibliography) came through fine, but the page breaks were slightly off, which for me is a minor issue.
    So, now my next step is to put everything into Pages including the photos (probably break the file into chapter files for faster, easier work/editing). So a five year project is about to wrap up in the next month, and Pages has been the breakthrough I needed to make it this far. It was far more satisfying than buying InDesign or Quark and trying to learn one of those, then produce anything with it. And since this will be self-published I don't have to have it print-shop perfect for them in their format.
    Maybe for many of you this seems rather minor. But for me struggling to find the right software to finish the project without losing the rest of my hair, this was a big deal, and a major step forward.

    Hi Dennis,
    I might be able to answer a few of your points. Having had two books published now I've got quite used to the wierdness of publishers and editors. With the editor I just send them a word document that they make their changes to in a differnet colour. Once all the editing is done and we're due to submit it to the publisher how it is submitted depends greatly on the publisher. My publisher accepts the manuscript in electronic format which is very rare. Most publishers still require that the manuscript be submitted in printed manuscript format. After the manuscript has been accepted by the publisher they make their changes and then we move into the PDF proof stage. Once everyone is happy it then goes to typesetting for print.
    I've had no issue with pages for either method and it certainly handles the large document lengths without issue.
    Chris

  • Working with bleeds and crop lines

    I have a document in Indesign that is 7" x 7". One one page of this document I have an image that is 8 x 8. Therefore, it is a full four-sided bleed.
    I want to be able to print or PDF this document so that the crop lines appear and the full 8 x 8 image appears (or at least, an image larger than the page size). This way it would be easy to cut out the image using a blade without white space peeking out.
    Can this be done in Indesign? If so, how would I go about doing it?
    Any help would be much appreciated.

    I'm sorry but I don't understand how to use the bleed, slug and crop features.
    I would have thought I could specify a page be 7 x 7 and have crop marks that are 7 x 7. And then I could set the bleed marks to be 0.5 inches out each way resulting in a bleed.
    But if this is the case, I am doing something wrong. Because changing the bleed seems to do the opposite. Obviously, I'm confused here about how this works. Any ideas?

  • Email Button - To: line blank and Cc: line with names listed

    I created an email button and I don't want the To: line filled with name(s) only the Cc: line this is what I have so far. What am I doing wrong?
    var sub
    sub = CTitle.rawValue;
    var ebody
    ebody = "The attached file is the filled-out form. Please open it to review the data."
    event.target.submitForm({cURL
    :"mailto: "";?&[email protected],[email protected];;&subject="+sub+"&body="+ebody,cSubmitAs:"PDF",cCharset:"utf-8"});

    I receive an error message:
    Microsoft Outlook does not recognize " "
    This is what have I have in the "on click" event:
    event.target.submitForm({cURL
    :"mailto:
    [email protected],[email protected];&subject=+sub+"&body="+ebody,cSubmitAs:"PDF",cCharset:"utf-8"});

  • Load and Trim Problems with IdeaTab A1000

    Lenovo IdeaTab A1000 16GB at work was a terrible device. Having spent two weeks hanging software. I had to give a warranty repairs.
    After a week of warranty repairs, the device worked for five hours and again hung software ...
    I'm beginning to think that was wrong with the choice of the device.

    I have to try this and I will let you.
              Thanks
              Jon Eagles wrote:
              > All,
              >
              > We have a simple servlet which looks up an RMI object from JNDI and invokes
              > one of its methods in a loop. The RMI object is the HelloClusterImpl
              > example provided by WebLogic. The servlet basically copies the code from
              > the HelloClusterClient. In the cluster property file, our load algorithm is
              > setup to be round-robin. We are using IIS as our web server. If we start
              > up both servers in the cluster and then use another machine as our client to
              > call the HelloClusterClient, we see that the calls to HelloClusterImpl
              > alternate between the two clustered servers. In fact, it is done perfectly
              > at 50% for each server. When we run the servlet from with the client's
              > browser, however, it seems as if which ever server in the cluster that
              > receives the servlet request then takes 100% of the calls to
              > HelloClusterImpl and there is never any alternating. Although we can verify
              > that different servers in the cluster receive the servlet request, it seems
              > as if there is never any altering between the servers during the method
              > invocations on the HelloClusterImpl servant. Does this seem right?
              > Shouldn't there be alternating between the servers? Any help would be
              > greatly appreciated.
              >
              > Thanks,
              >
              > -Jon
              

  • I added greasemonkey and it works with two of my games but not the third one and these are the same type of games Dragons ofAtlantis on Facebook. Why would it work on two and not the third?

    I have windows 7 and firefox 6.0 greasemonkey I had just installed this program

    1. If you break your post into paragraphs it is much easier to read.
    2. I have no idea what your post is referring to, and how - if at all - it relates to iPhoto.
    3. It's a good idea to re-read what you've posted, and ask yourself how it might look to someone who doesn't know you and doesn't know what's going on with your machine.

  • Adding music and associating it with clip or pic

    Question... if I add a song to a movie that begins at a particular clip or picture.  If I then move the picture, the song doesn't always stick to that picture.  Is there a way to do this?
    Another scenario... I add a song to a movie clip or pic.  I then add stuff before that clip.  How to make the song stick with that original clip and move with it?
    thanks.

    Karsten... thanks!  I wish I was that sophisticated to use GB
    AM.... I like the draging the borders, but only thing is I don't know where to stop.  I often will preview the music in itunes and then I know for example, I want to start a song at 35 seconds into a song on a clip.... but then when I slide the ends, I don't know or can't see where 35 seconds is (so it is very tedious trial/error and I am sure it is me not knowing tricks).  So I'll have to try Karsten's cmd-Y to see if that provides details of the timing on the song(when I get home). 
    Thanks again guys.

  • InDesign Cs4 Bleed/Slug not scaling with reduced print?

    Maybe I'm crazy, but I feel certain that when I've printed my layouts in the past, Indesign scaled the bleed and slug along with the rest of the page when I printed at a reduced size.
    Today, I can't get the bleed or the slug to output in relative scale to the document. i.e. a 20" x 32" poster with 1/8" bleeds and a 2 inch slug on top is being printed at 50%. In the Print preview box, it shows that while the page is being reduced properly to 10" x 16", the bleed is still 1/8" and the slug is still 2 inches, not 1/16" and 1" as I would have expected.
    o

    Sorry, miskeyed and hit the return key before I finished my thoughts:
    Am I wrong in thinking that InDesign usually scales bleed and slug with the page? Am I mis-remembering?
    If not, what is causing the odd non-scaling of bleed and slug?
    Mac OS 10.5.8
    Creative Suite 4
    InDesign v6.0.6

  • Sneak Peek #3 about the future of Photoshop: dashed and dotted lines

    Zorana Gee shared another Photoshop Sneak Peek, this time about dashed and dotted lines:
    Could it be useful in your workflow?

    I think dotted and dashed lines with gradients sounds useful. I won't have to go to Illustrator and back to get those functions.
    BUT MORE IMPORTANTLY
    I would like to see some other upgrades to the pen tool and vector masks:
    • All too often I can't really see the pen tool line when I am making a vector selection – it gets lost in the clutter. Could there be an option to assign a color to the path? Hot green or magenta?
    • I would like to be able to change the size that vector points display. If I could make the points appear slightly larger it would often make editing easier.
    • I would like to be able to select two points very close to one another and JOIN them like in AI. I don't understand why the pen tool doesn't share more of the functions of the pen tool in Illustrator such as CUT. It sometimes seems like the vector tools in Photoshop and Illustrator were developed completetly independent of one another.
    Attached (I hope) are images demonstrating how hard it can be to see paths. Can you see the paths? In the first image the path is there, not selected. In the second the path is selected. This makes my work very irritating sometimes.
    Craig

  • Have Firefox home page set for Google search, but each following tab opens w/Yahoo search instead. How do I remove the Yahoo and have Google home page on every tab????

    As I said above: I Have Firefox browser home page set for Google search, but each following tab (but suddenly now it) opens w/Yahoo search instead. How do I remove the Yahoo search off the added tabs and have Google home page/ blank tab (like it used to be) on every tab????

    The new Firefox Start Page - '''about:home''' - isn't the same homepage that was used in earlier versions of Firefox - http://www.google.com/firefox There is no "setting" for the "Search Container" on the about:home "page" - in the Options UI or in about:config .
    Set that old "Mozilla Firefox Start Page" as your "homepage". <br />
    http://support.mozilla.com/en-US/kb/How+to+set+the+home+page
    Or open your Profile folder and delete the '''webappsstore.sqlite''' file and hope the "Search Container" on the about:home "page" returns to Google. When it '''''is''''' Google, the Google logo appears to the left of the "Search Container"; when the search engine there has been changed to something else, there is no logo to the left of the "Search Container" - AFAIK.

  • Basic printing questions with safe zones, trim lines and bleeds

    I am working with a file that has safe zones, trim lines and bleeds. If I place something that touches the outer edges of the document at the bleed zone, how will it display if there is a trim line before it? Won't it be trimmed anyways?
    Thanks.

    Consider the bleed a precautionary measure in the case of registration variance when cutting the actual printed product.
    So it should be cut off, but it may actually become visible (partially).

Maybe you are looking for