Adding BO System in SLD
Hi,
For ABAP systems we add it in SLD through RZ70 & for Java through Visual Admin.How to add BO system(SAP BusinessObjects Enterprise XI 3.1 ) in SLD?Is there anyway we can add it through CMC?
Hi, if you read the document END-TO-END ROOT CAYSE ANALYSIS (System Landscape Setup Guide) V 2.14 section 4.40. You can read the following information :
>>4.40 SAP BusinessObjects Enterprise XI 3.0 & 3.1
Latest up to date information for SAP BOE 3.x is available in SAP Note 1357901.For Business Objects Enterprise XI 3.0 and 3.1 an automated creation of the technical landscape via SLD is not available. Therefore you need to create the technical landscape manually using the transaction SMSY and afterwards perform the managed system setup for all BOE Technical Systems created.
Hope it's help
Similar Messages
-
Hi ,
I have added ECC 5.0 system into SLD using RZ70 transaction . Now I need to add another web as ABAP system ( out crm system ). Is there any way I can add it automatically or I need to do add it manually using ' New Technical system , under Home -> Technical system ?
Pls adviceJayant,
I'm not entirely sure about a Web AS ABAP system but with a Web AS Java system you can launch the Visual Administrator, navigate to the SLD Provider service and add the connection details for the SLD server and it automtically updates the SLD with the Web AS server. I guess it would be the same with the ABAP stack.
Steve -
No Installed Products while adding Technical System in SLD!
Hello,
I am trying to add Technical Systems in SLD. when I was at the point to select the software components, I am not seeing any installed products on the left side.
I already gave the ABAP system details in the previous screens, in this wizard.
Why is it that I am not seeing any installed products.
Thanks
SrinivasHi Jazz,
Here are the errors I am getting.
Import finished with 72 errors
Errors:
CIM_ERR_FAILED: CIM qualifier Alias is currently not supported by this implementation
QUALIFIER.DECLARATION Alias
CIM_ERR_FAILED: CIM qualifier BitMap is currently not supported by this implementation
QUALIFIER.DECLARATION BitMap
CIM_ERR_FAILED: CIM qualifier BitValues is currently not supported by this implementation
QUALIFIER.DECLARATION BitValues
CIM_ERR_FAILED: CIM qualifier Composition is currently not supported by this implementation
QUALIFIER.DECLARATION Composition
CIM_ERR_FAILED: CIM qualifier Counter is currently not supported by this implementation
QUALIFIER.DECLARATION Counter
CIM_ERR_FAILED: CIM qualifier Delete is currently not supported by this implementation
QUALIFIER.DECLARATION Delete
CIM_ERR_FAILED: CIM qualifier Deprecated is currently not supported by this implementation
QUALIFIER.DECLARATION Deprecated
CIM_ERR_FAILED: CIM qualifier DN is currently not supported by this implementation
QUALIFIER.DECLARATION DN
CIM_ERR_FAILED: CIM qualifier Expensive is currently not supported by this implementation
QUALIFIER.DECLARATION Expensive
CIM_ERR_FAILED: CIM qualifier Experimental is currently not supported by this implementation
QUALIFIER.DECLARATION Experimental
CIM_ERR_FAILED: CIM qualifier Gauge is currently not supported by this implementation
QUALIFIER.DECLARATION Gauge
CIM_ERR_FAILED: CIM qualifier Ifdeleted is currently not supported by this implementation
QUALIFIER.DECLARATION Ifdeleted
CIM_ERR_FAILED: CIM qualifier In is currently not supported by this implementation
QUALIFIER.DECLARATION In
CIM_ERR_FAILED: CIM qualifier Invisible is currently not supported by this implementation
QUALIFIER.DECLARATION Invisible
CIM_ERR_FAILED: CIM qualifier Large is currently not supported by this implementation
QUALIFIER.DECLARATION Large
CIM_ERR_FAILED: CIM qualifier MaxValue is currently not supported by this implementation
QUALIFIER.DECLARATION MaxValue
CIM_ERR_FAILED: CIM qualifier MinLen is currently not supported by this implementation
QUALIFIER.DECLARATION MinLen
CIM_ERR_FAILED: CIM qualifier MinValue is currently not supported by this implementation
QUALIFIER.DECLARATION MinValue
CIM_ERR_FAILED: CIM qualifier Nonlocal is currently not supported by this implementation
QUALIFIER.DECLARATION Nonlocal
CIM_ERR_FAILED: CIM qualifier NonlocalType is currently not supported by this implementation
QUALIFIER.DECLARATION NonlocalType
CIM_ERR_FAILED: CIM qualifier NullValue is currently not supported by this implementation
QUALIFIER.DECLARATION NullValue
CIM_ERR_FAILED: CIM qualifier Octetstring is currently not supported by this implementation
QUALIFIER.DECLARATION Octetstring
CIM_ERR_FAILED: CIM qualifier Out is currently not supported by this implementation
QUALIFIER.DECLARATION Out
CIM_ERR_FAILED: CIM qualifier PropertyUsage is currently not supported by this implementation
QUALIFIER.DECLARATION PropertyUsage
CIM_ERR_FAILED: CIM qualifier Provider is currently not supported by this implementation
QUALIFIER.DECLARATION Provider
CIM_ERR_FAILED: CIM qualifier Read is currently not supported by this implementation
QUALIFIER.DECLARATION Read
CIM_ERR_FAILED: CIM qualifier Schema is currently not supported by this implementation
QUALIFIER.DECLARATION Schema
CIM_ERR_FAILED: CIM qualifier Source is currently not supported by this implementation
QUALIFIER.DECLARATION Source
CIM_ERR_FAILED: CIM qualifier SourceType is currently not supported by this implementation
QUALIFIER.DECLARATION SourceType
CIM_ERR_FAILED: CIM qualifier Static is currently not supported by this implementation
QUALIFIER.DECLARATION Static
CIM_ERR_FAILED: CIM qualifier Syntax is currently not supported by this implementation
QUALIFIER.DECLARATION Syntax
CIM_ERR_FAILED: CIM qualifier SyntaxType is currently not supported by this implementation
QUALIFIER.DECLARATION SyntaxType
CIM_ERR_FAILED: CIM qualifier Terminal is currently not supported by this implementation
QUALIFIER.DECLARATION Terminal
CIM_ERR_FAILED: CIM qualifier TriggerType is currently not supported by this implementation
QUALIFIER.DECLARATION TriggerType
CIM_ERR_FAILED: CIM qualifier UnknownValues is currently not supported by this implementation
QUALIFIER.DECLARATION UnknownValues
CIM_ERR_FAILED: CIM qualifier UnsupportedValues is currently not supported by this implementation
QUALIFIER.DECLARATION UnsupportedValues
CIM_ERR_FAILED: CIM qualifier Write is currently not supported by this implementation
QUALIFIER.DECLARATION Write
CIM_ERR_FAILED: Unknown qualifier Deprecated found in property ScheduledStartTime
CIM_Job
CIM_ERR_FAILED: Unknown qualifier Write found in property DeleteOnCompletion
CIM_JobSettingData
CIM_ERR_INVALID_SUPERCLASS: No such superclass for class CIM_ConcreteJob: CIM_Job
CIM_ConcreteJob
CIM_ERR_FAILED: Unknown qualifier Write found in property EnabledDefault
CIM_EnabledLogicalElement
CIM_ERR_FAILED: Unknown qualifier Write found in property PrimaryOwnerName
CIM_System
CIM_ERR_FAILED: Unknown qualifier Write found in property PrimaryOwnerName
CIM_Service
CIM_ERR_FAILED: Unknown qualifier Gauge found in property AvailableSpace
CIM_FileSystem
CIM_ERR_FAILED: Unknown qualifier Deprecated found in property array PowerManagementCapabilities
CIM_ComputerSystem
CIM_ERR_FAILED: Unknown qualifier Gauge found in property NumberOfUsers
CIM_OperatingSystem
CIM_ERR_FAILED: Unknown qualifier Gauge found in property FileSize
CIM_LogicalFile
CIM_ERR_FAILED: Unknown qualifier Deprecated found in property PowerManagementSupported
CIM_LogicalDevice
CIM_ERR_FAILED: No such override property in superclass CIM_System: EnabledState
CIM_ApplicationSystem
CIM_ERR_FAILED: Unknown qualifier Gauge found in property WorkingSetSize
CIM_Process
CIM_ERR_INVALID_SUPERCLASS: No such superclass for class CIM_LogicalPort: CIM_LogicalDevice
CIM_LogicalPort
CIM_ERR_INVALID_SUPERCLASS: No such superclass for class CIM_Processor: CIM_LogicalDevice
CIM_Processor
CIM_ERR_INVALID_SUPERCLASS: No such superclass for class CIM_NetworkAdapter: CIM_LogicalDevice
CIM_NetworkAdapter
CIM_ERR_INVALID_SUPERCLASS: No such superclass for class CIM_NetworkPort: CIM_LogicalPort
CIM_NetworkPort
CIM_ERR_FAILED: Unknown qualifier Composition found in class CIM_OSProcess
CIM_OSProcess
CIM_ERR_FAILED: Unknown qualifier Composition found in class CIM_FRUIncludesProduct
CIM_FRUIncludesProduct
CIM_ERR_FAILED: Unknown qualifier Composition found in class CIM_ProductParentChild
CIM_ProductParentChild
CIM_ERR_FAILED: Unknown qualifier Composition found in class CIM_FileStorage
CIM_FileStorage
CIM_ERR_FAILED: Unknown qualifier Deprecated found in class CIM_ProvidesServiceToElement
CIM_ProvidesServiceToElement
CIM_ERR_FAILED: Class CIM_OperatingSystem referenced by association CIM_RunningOS does not exist.
CIM_RunningOS
CIM_ERR_FAILED: Unknown qualifier Composition found in class CIM_SystemDevice
CIM_SystemDevice
CIM_ERR_FAILED: Class CIM_OperatingSystem referenced by association CIM_BootOSFromFS does not exist.
CIM_BootOSFromFS
CIM_ERR_FAILED: Unknown qualifier Deprecated found in property CompiledBits
SAP_BCApplicationServer
CIM_ERR_FAILED: Unknown qualifier STATIC found in property AccSldModelVersion2
SAP_ACEEngine
CIM_ERR_INVALID_SUPERCLASS: No such superclass for class SAP_ACENetworkInterface: CIM_NetworkPort
SAP_ACENetworkInterface
CIM_ERR_FAILED: Unknown qualifier Deprecated found in class SAP_JCODestination
SAP_JCODestination
CIM_ERR_FAILED: Unknown qualifier Deprecated found in class SAP_MsgServJCODestination
SAP_MsgServJCODestination
CIM_ERR_FAILED: Unknown qualifier Deprecated found in class SAP_AppServJCODestination
SAP_AppServJCODestination
CIM_ERR_FAILED: Class SAP_ACENetworkInterface referenced by association SAP_ACENetworkToNetworkInterface does not exist.
SAP_ACENetworkToNetworkInterface
CIM_ERR_FAILED: Class SAP_ACEEngine referenced by association SAP_ACEAssociatedVirtualizationManager does not exist.
SAP_ACEAssociatedVirtualizationManager
CIM_ERR_FAILED: Class SAP_ACEEngine referenced by association SAP_HostedACEEngine does not exist.
SAP_HostedACEEngine
CIM_ERR_INVALID_SUPERCLASS: No such superclass for class SAP_ACENetworkInterfaceComponent: CIM_SystemDevice
SAP_ACENetworkInterfaceComponent -
Probelm in adding system in SLD
Hi,
I added ECC system (ABAP technical sys) in SLD of EP.
It was working fine.
Now i removed it from SLD and trying to add it again.
It is giving this error "CIM_ERR_ALREADY_EXISTS: Instance already exists: SAP_InstalledProduct.CollectionID="41402937-f702-fa00-fe65-a506ad18953e",ProductIdentifyingNumber="01200615320900001261",ProductName="SAP ECC",ProductVendor="sap.com",ProductVersion="6.0",SystemID="BPD.SystemNumber.0020401696.SystemHome.bpblerpd"
I logged off and logged in to SLD.Under ABAP technical system the entry is there but it is not showing Message server details,Installed products all this.
I need to get this info to creat JCO connections.
From that error message i can understand that it is saying system is allready there.But i removed and recreated still it is giving the same message.
Anybody please guide me with a solution
With Regards,
Pradeep.BHi Michael Nicholls ,
I dont have ABAP stack in my EP machine.
The only way i can add is through http://hostname:5xx00/sld.
can you please suggest me.
Is there any possibility of clearing Portal SLD cache.
Regards,
Pradeep.B -
Right now when I go create a model using the Create Model wizard, there is no option to select an SAP system.
So I figure that I have to add a system to the SLD, since our SLD had none of our SAP sytems set up. When I logon to the SLD via http://servername:50000/sld I click the Technical Landscape Link. Next I click the New Technical System button. Then I go thru the wizard entering in the proper information, until I get to the page where you have to add a product. It gives me no choice of product. What do I do here???
I am adding a Web ABAP system and have checked all the values to make sure they are correct...
Any advise on Adding a system to an SLD would be helpful. I've been over the documentation, but it doesn't seem very thoroughHi Thomas,
Please refer to page 10 of the Post-Installation Guide for the SLD.
I am copying the relevant section (3.3.3. Initial Data Import) for you.
Hope this helps,
- Vik.
"The SLD server implements the DMTF Common Information Model (CIM) (www.dmtf.org). Before you start to use the SLD server, you have to import the information about available SAP components (CR_Content.zip). This file is located in the directory <system-install-dir>\SYS\global\sld\model.
Since CR_Content.zip contains all available SAP components, the content of this file grows with time. The extensions contain information about new components (new releases and Support Pacakges, for example). This content in the SLD has to be updated from time to time. You can download the most up-to-date files from the SAP Service Marketplace. See SAP Note 669669 for details.
To import the file:
1. On the main page of SLD, choose 'Administration' -> 'Import'.
2. Specify the file name.
3. Choose 'Import Data'.
The files are transferred to the SLD server. The typical load time for this import step is 20 minutes." -
Hi folks,
I have a SLD set up to use the R/3 backend on the same server. I've also added another R/3 backend to the technical systems, so I can set up a JCO to use this. When I try to set up a JCO with the new backend and try to ping it I get the following error:
com.sap.mw.jco.JCO$Exception: (102) RFC_ERROR_COMMUNICATION: Connect to message server host failed Connect_PM TYPE=B MSHOST=trel-p40 GROUP=PUBLIC R3NAME=SOE MSSERV=sapmsSOE PCS=1 LOCATION CPIC (TCP/IP) on local host with Unicode ERROR service 'sapmsSOE' unknown TIME Thu May 31 12:43:10 2007 RELEASE 700 COMPONENT NI (network interface) VERSION 38 RC -3 MODULE nixxhsl.cpp LINE 776 DETAIL NiHsLGetServNo: service name cached as unknown COUNTER 1
As I can see the JCO points to my local R/3 not to the remote one. So here's my question: How do I tell the SLD that my newly added technical system is in some onther place. I've added the hostnames respectivly but I can't see how the sld would know where to look for a hostname that's not part of the local domain.
Any help would be highly appreciated!
Thanks in advance,
RobertSure, so here's what I'm trying to do: I have a development system consistion of an ERP 5 plus Portal 6.0 and all nessaccery components. I'll use this system to develop webdynpro apps and get them running in the portal.
It's basically just prototypes but in order to give some customers the big picture I wanna connect my webdynpro apps to the customers R/3 for a live presentation with real data.
The Connection runns over JCOs implementing the SLD destination and login data for the remote system (customer side). The remote R/3 just holds an functional package (don't know how it's called in English) that's RFC enabled.
So now I'm facing the problem: How do I get the remote system to be accessable by my JCOs. My thought was just add it in the SLD as a technical system.
As you can see I'm lacking basic understanding of SLD. Maybe you could set me on the right track? -
B1if BizSteps that create new systems in SLD
Hi,
I want to create scenario that creates new updates system in SLD. I read in documentation that using B1if API new jobs can be added to JobCreator and JobExecutor. Is there any help or tutorial that shows how to create job step by step and use them to create, update or delete systems in SLD?
Regards
SzymonAs per my understand, when you create a new company, you have to undergo upgrade SAP Server procedure, at this time SDL of your new company is created.
IF you are talking about document like B1PO to B1SO, then you have to refer other document.
Thanks
Kevin -
Problem creating new ABAP Technical System in SLD
I newly installed a ECC 5 IDES system (ABAP + JAVA) on my computer for ABAP and Webdynpro learning.
I got problem when I try to create new ABAP Technical System in SLD.
I put my steps of installation here so you know my full story.
1. Install Central Instance (Non-unicode);
2. Install Database Instance (Non-unicode);
3. Install Java add-in on ABAP;
4. Configure the HTTP connection parameters in J2EE Engine Visual Administrator
All of the above steps are successful.
Now my Webdynpro application need to access a Function Module, so I want to create a JCo connection in Webdynpro Content Administrator, but both application server and message server are not available, so I can't create any connection.
I go back to SLD to register ABAP Technical System step by step below:
1. Choose Home ® Technical Systems.
2. Choose New Technical System.
3. Select the AS ABAP radio button.
4. Choose Next.
5. Enter system details (Installation number, host name).
6. Choose Next.
7. Enter message server and central application server details.
8. Choose Next.
9. Choose Next.
10. Add New Client 800, leave logical name blank, click Add.
11. Choose Next.
12. Here the system says 'No product available', the whole effort make no sense.
I tried every possible settings, but at step 12 it keeps telling me 'No product available'.
This is the problem I want to fix.
Can anyone help me?
Thanks a lot in advance.hi,
use th following thread,
No products installed while adding a Technical ABAP System in the SLD.
Regards
Jayapriya -
Adding a system to Solution in Maintenance Optimizer
Dear All,
We have installed two NW systems. One is based upon NW 7.0 EHP 2 and the other is based on NW 7.4 SR1. On both of these, we intend to install Duet Enterprise 2.0 add-ons. I have been asked to calculate the SP stack for both NW releases. Based on my limited knowledge of Solution Manager, I have created a solution "Duet Enterprise" and added both systems info in SMSY (server, database etc.). Now, when I create a maintenance transaction in MOPZ, I am unable to see any system in product version in the operations tab as compared to another solution which shows a system SPR (please see attached screenshots).
Please advise the steps through which I can add a system so that it shows in the Duet Solution.
Greatly appreciate any help provided.
Kind regards,
Amer.Hi Amer
Have you checked below links
Maintenance Optimizer - Solution Manager - SCN Wiki
Step By Step Process to configure SLD, MOPZ & EWA in Solution Manager 7.1 SP 8
make sure you have lmdb entries properly reflected for these systems and above links gives more insights for mopz.
Thanks
Prakhar -
Problem with business systems in SLD
Hey guys
i m doing a IDOC to file scenario and m creating two business systems in SLD
the first one uses the logical system name of the R/3 server and has been configured as WAS ABAP.
when i try to create the second one as a third party using the logical system name i defined in BD54(on R/3 server),i get the error sayin that a business system already exist with the logical system name.
i do have one businees system which is using the same logical system but that has been configured as WAS ABAP.
cant i assign two different business names to same logical systems?
thanx
ahmad
Message was edited by:
AhmadHey
thanx ,now when i try to use the same business system name for the R/3 server in the second scenaario,i dont see the business system in ID,i did cache refresh,
also just want to make sure
i have configured my SLD as under for the first scenario
created two business system,first one is using the logical system name of the R/3 server configured as WAS ABAP and the second one is configured as third paarty and using the logical system name created in BD54.
do these setting looks good to u?
now can i use both these business system in my second IDOC to File scenariio?
thanx
ahmad -
Error while trying to open an added backend system in portal
Hi All,
I need one help.
I have added our Backend SAP SRM system in the Enterprise portal and it worked good.
But now if I try to open the added SRM system in the below path
System Administration à System Configuration à System Landscape -> portal contents -> system backends -> MY SRM(added system)
I am facing the error page cannot be displayed error as below
The page cannot be displayed
Explanation: There is a problem with the page you are trying to reach and it cannot be displayed.
Try the following:
u2022 Refresh page: Search for the page again by clicking the Refresh button. The timeout may have occurred due to Internet congestion.
u2022 Check spelling: Check that you typed the Web page address correctly. The address may have been mistyped.
u2022 Access from a link: If there is a link to the page you are looking for, try accessing the page from that link.
Technical Information (for support personnel)
u2022 Error Code: 500 Internal Server Error. The request was rejected by the HTTP filter. Contact the server administrator. (12217)
Please help me to solve it, Thanks a advance.
Thanks,
SenthilHi,
Are you using any webdispatcher or some proxy? Is there any URL filter configured in between?
If yes then I think you have to allow these pages.
Regards,
Vamshi. -
Error while exporting the 3rd party technical system in SLD
Dear all,
We're currently using PI 7.0. When trying to export the technical system in SLD, after the exporting, the IE jumps to the download page automatically, but there's a exclamation mark with no text info. I've tried to create a new 3rd-party technical system and try to export, the same thing happened.
It happened in both our develop and our production PI system.
Also I've found following error info in SLD server log:
Log Record Details
#33 04/19/2007 10:07:38.573 [SAPEngine_Application_Thread[impl:3]_33]
ERROR com.sap.sld.wd.technicalsystem.ExportView: null
Thrown:
java.lang.UnsupportedOperationException
at java.util.AbstractCollection.add(AbstractCollection.java:216)
at java.util.AbstractCollection.addAll(AbstractCollection.java:319)
at
com.sap.lcr.webui.admin.ImportExportControl.addAssociatorAndReferenceNames(ImportExportControl.java:1244)
at com.sap.sld.wd.technicalsystem.ExportView.getBCSystemExportList
(ExportView.java:285)
at com.sap.sld.wd.technicalsystem.ExportView.getExport
(ExportView.java:193)
at com.sap.sld.wd.technicalsystem.wdp.InternalExportView.getExport
(InternalExportView.java:137)
at
com.sap.sld.wd.technicalsystem.wdp.IPrivateExportView$IContextElement.wdGetObject(IPrivateExportView.java:208)
at com.sap.tc.webdynpro.progmodel.context.AttributePointer.getObject
(AttributePointer.java:158)
at com.sap.tc.webdynpro.clientserver.data.DataContainer.getAndFormat
(DataContainer.java:1092)
at com.sap.tc.webdynpro.clientserver.data.DataContainer.getAndFormat
(DataContainer.java:1064)
at
com.sap.tc.webdynpro.clientserver.uielib.standard.impl.FileDownload._getData(FileDownload.java:81)
at
com.sap.tc.webdynpro.clientserver.uielib.standard.uradapter.FileDownloadAdapter.getReference(FileDownloadAdapter.java:291)
at com.sap.tc.ur.renderer.ie6.LinkRenderer.render(LinkRenderer.java:53)
at
com.sap.tc.webdynpro.clientimpl.html.renderer.uielements.base.RenderManager.render(RenderManager.java:434)
at
com.sap.tc.webdynpro.clientimpl.html.renderer.uielements.base.RenderManager.render(RenderManager.java:133)
at
com.sap.tc.ur.renderer.ie6.GridLayoutRenderer.renderGridLayoutCellFragment(GridLayoutRenderer.java:826)
at
com.sap.tc.ur.renderer.ie6.GridLayoutRenderer.renderGridLayoutRowFragment(GridLayoutRenderer.java:424)
at
com.sap.tc.ur.renderer.ie6.GridLayoutRenderer.renderGridLayoutFragment
(GridLayoutRenderer.java:336)
at com.sap.tc.ur.renderer.ie6.GridLayoutRenderer.render
(GridLayoutRenderer.java:79)
at
com.sap.tc.webdynpro.clientimpl.html.renderer.uielements.base.RenderManager.render(RenderManager.java:434)
at
com.sap.tc.webdynpro.clientimpl.html.renderer.uielements.base.RenderManager.render(RenderManager.java:133)
at com.sap.tc.ur.renderer.ie6.GroupRenderer.renderGroupFragment
(GroupRenderer.java:1184)
at com.sap.tc.ur.renderer.ie6.GroupRenderer.render
(GroupRenderer.java:74)
at
com.sap.tc.webdynpro.clientimpl.html.renderer.uielements.base.RenderManager.render(RenderManager.java:434)
at
com.sap.tc.webdynpro.clientimpl.html.renderer.uielements.base.RenderManager.render(RenderManager.java:133)
at
com.sap.tc.ur.renderer.ie6.FlowLayoutRenderer.renderFlowLayoutItemFragment(FlowLayoutRenderer.java:254)
at
com.sap.tc.ur.renderer.ie6.FlowLayoutRenderer.renderFlowLayoutFragment
(FlowLayoutRenderer.java:210)
at com.sap.tc.ur.renderer.ie6.FlowLayoutRenderer.render
(FlowLayoutRenderer.java:49)
at
com.sap.tc.webdynpro.clientimpl.html.renderer.uielements.base.RenderManager.render(RenderManager.java:434)
at
com.sap.tc.webdynpro.clientimpl.html.renderer.uielements.base.RenderManager.render(RenderManager.java:133)
at
com.sap.tc.ur.renderer.ie6.ScrollContainerRenderer.renderScrollContainerFragment(ScrollContainerRenderer.java:619)
at com.sap.tc.ur.renderer.ie6.ScrollContainerRenderer.render
(ScrollContainerRenderer.java:74)
at
com.sap.tc.webdynpro.clientimpl.html.renderer.uielements.base.RenderManager.render(RenderManager.java:434)
at
com.sap.tc.webdynpro.clientimpl.html.renderer.uielements.base.RenderManager.render(RenderManager.java:133)
at
com.sap.tc.ur.renderer.ie6.ViewContainerRenderer.renderViewContainerFragment(ViewContainerRenderer.java:134)
at com.sap.tc.ur.renderer.ie6.ViewContainerRenderer.render
(ViewContainerRenderer.java:49)
at
com.sap.tc.webdynpro.clientimpl.html.renderer.uielements.base.RenderManager.render(RenderManager.java:434)
at
com.sap.tc.webdynpro.clientimpl.html.renderer.uielements.base.RenderManager.render(RenderManager.java:133)
at
com.sap.tc.ur.renderer.ie6.FlowLayoutRenderer.renderFlowLayoutItemFragment(FlowLayoutRenderer.java:254)
at
com.sap.tc.ur.renderer.ie6.FlowLayoutRenderer.renderFlowLayoutFragment
(FlowLayoutRenderer.java:210)
at com.sap.tc.ur.renderer.ie6.FlowLayoutRenderer.render
(FlowLayoutRenderer.java:49)
at
com.sap.tc.webdynpro.clientimpl.html.renderer.uielements.base.RenderManager.render(RenderManager.java:434)
at
com.sap.tc.webdynpro.clientimpl.html.renderer.uielements.base.RenderManager.render(RenderManager.java:133)
at
com.sap.tc.ur.renderer.ie6.ScrollContainerRenderer.renderScrollContainerFragment(ScrollContainerRenderer.java:619)
at com.sap.tc.ur.renderer.ie6.ScrollContainerRenderer.render
(ScrollContainerRenderer.java:74)
at
com.sap.tc.webdynpro.clientimpl.html.renderer.uielements.base.RenderManager.render(RenderManager.java:434)
at
com.sap.tc.webdynpro.clientimpl.html.renderer.uielements.base.RenderManager.render(RenderManager.java:133)
at
com.sap.tc.ur.renderer.ie6.ViewContainerRenderer.renderViewContainerFragment(ViewContainerRenderer.java:134)
at com.sap.tc.ur.renderer.ie6.ViewContainerRenderer.render
(ViewContainerRenderer.java:49)
at
com.sap.tc.webdynpro.clientimpl.html.renderer.uielements.base.RenderManager.render(RenderManager.java:434)
at
com.sap.tc.webdynpro.clientimpl.html.renderer.uielements.base.RenderManager.render(RenderManager.java:133)
at
com.sap.tc.ur.renderer.ie6.ViewContainerRenderer.renderViewContainerFragment(ViewContainerRenderer.java:134)
at com.sap.tc.ur.renderer.ie6.ViewContainerRenderer.render
(ViewContainerRenderer.java:49)
at
com.sap.tc.webdynpro.clientimpl.html.renderer.uielements.base.RenderManager.render(RenderManager.java:434)
at
com.sap.tc.webdynpro.clientimpl.html.renderer.uielements.base.RenderManager.render(RenderManager.java:133)
at
com.sap.tc.ur.renderer.ie6.GridLayoutRenderer.renderGridLayoutCellFragment(GridLayoutRenderer.java:826)
at
com.sap.tc.ur.renderer.ie6.GridLayoutRenderer.renderGridLayoutRowFragment(GridLayoutRenderer.java:424)
at
com.sap.tc.ur.renderer.ie6.GridLayoutRenderer.renderGridLayoutFragment
(GridLayoutRenderer.java:336)
at com.sap.tc.ur.renderer.ie6.GridLayoutRenderer.render
(GridLayoutRenderer.java:79)
at
com.sap.tc.webdynpro.clientimpl.html.renderer.uielements.base.RenderManager.render(RenderManager.java:434)
at
com.sap.tc.webdynpro.clientimpl.html.renderer.uielements.base.RenderManager.render(RenderManager.java:133)
at
com.sap.tc.ur.renderer.ie6.ScrollContainerRenderer.renderScrollContainerFragment(ScrollContainerRenderer.java:619)
at com.sap.tc.ur.renderer.ie6.ScrollContainerRenderer.render
(ScrollContainerRenderer.java:74)
at
com.sap.tc.webdynpro.clientimpl.html.renderer.uielements.base.RenderManager.render(RenderManager.java:434)
at
com.sap.tc.webdynpro.clientimpl.html.renderer.uielements.base.RenderManager.render(RenderManager.java:133)
at
com.sap.tc.webdynpro.clientimpl.html.renderer.uielements.base.UiWindowRenderer.render(UiWindowRenderer.java:52)
at
com.sap.tc.webdynpro.clientimpl.html.renderer.uielements.base.RenderManager.render(RenderManager.java:434)
at
com.sap.tc.webdynpro.clientimpl.html.renderer.uielements.base.RenderManager.render(RenderManager.java:133)
at com.sap.tc.webdynpro.clientimpl.html.client.HtmlClient.sendHtml
(HtmlClient.java:1039)
at
com.sap.tc.webdynpro.clientimpl.html.client.HtmlClient.fillDynamicTemplateContext(HtmlClient.java:455)
at com.sap.tc.webdynpro.clientimpl.html.client.HtmlClient.sendResponse
(HtmlClient.java:1223)
at com.sap.tc.webdynpro.clientimpl.html.client.HtmlClient.sendResponse
(HtmlClient.java:1179)
at com.sap.tc.webdynpro.clientimpl.html.client.HtmlClient.sendResponse
(HtmlClient.java:299)
at com.sap.tc.webdynpro.clientserver.cal.AbstractClient.finishTasks
(AbstractClient.java:173)
at
com.sap.tc.webdynpro.clientserver.session.ApplicationSession.doProcessing(ApplicationSession.java:313)
at
com.sap.tc.webdynpro.clientserver.session.ClientSession.doApplicationProcessingStandalone(ClientSession.java:753)
at
com.sap.tc.webdynpro.clientserver.session.ClientSession.doApplicationProcessing(ClientSession.java:705)
at com.sap.tc.webdynpro.clientserver.session.ClientSession.doProcessing
(ClientSession.java:261)
at com.sap.tc.webdynpro.clientserver.session.RequestManager.doProcessing(RequestManager.java:154)
at
com.sap.tc.webdynpro.serverimpl.defaultimpl.DispatcherServlet.doContent
(DispatcherServlet.java:62)
at com.sap.tc.webdynpro.serverimpl.defaultimpl.DispatcherServlet.doPost
(DispatcherServlet.java:53)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:760)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
at
com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.runServlet
(HttpHandlerImpl.java:401)
at
com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.handleRequest(HttpHandlerImpl.java:266)
at
com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet
(RequestAnalizer.java:387)
at
com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet
(RequestAnalizer.java:365)
at
com.sap.engine.services.httpserver.server.RequestAnalizer.invokeWebContainer(RequestAnalizer.java:944)
at com.sap.engine.services.httpserver.server.RequestAnalizer.handle
(RequestAnalizer.java:266)
at com.sap.engine.services.httpserver.server.Client.handle
(Client.java:95)
at com.sap.engine.services.httpserver.server.Processor.request
(Processor.java:160)
at
com.sap.engine.core.service630.context.cluster.session.ApplicationSessionMessageListener.process(ApplicationSessionMessageListener.java:33)
at com.sap.engine.core.cluster.impl6.session.MessageRunner.run
(MessageRunner.java:41)
at com.sap.engine.core.thread.impl3.ActionObject.run
(ActionObject.java:37)
at java.security.AccessController.doPrivileged(Native Method)
at com.sap.engine.core.thread.impl3.SingleThread.execute
(SingleThread.java:100)
at com.sap.engine.core.thread.impl3.SingleThread.run
(SingleThread.java:170)
Hope you can help us.
Thanks and B'Rgds,
YiNingnot sure if it has relevance, but the SLD level transports will do nothing but create a CIM file which should be downloaded to your deskktop.
1. Make sure that there are no Pop Up BLocker's acting on the XI server on your machine.
2. Make sure that you have the download authorizations on your machine.
Regards
Bhavesh -
Error while deleting the business system in SLD
HI
I am trying to delete the business system in SLD and encountering the following error .
if some one has any idea as to why is this error occuring
java.lang.NullPointerException at com.sap.sld.wd.businesssystem.BusinessSystem.removeXIIntegrationServer(BusinessSystem.java:497) at com.sap.sld.wd.businesssystem.wdp.InternalBusinessSystem.removeXIIntegrationServer(InternalBusinessSystem.java:474) at com.sap.sld.wd.businesssystem.BusinessSystemMainView.RemoveOk(BusinessSystemMainView.java:450) at com.sap.sld.wd.businesssystem.wdp.InternalBusinessSystemMainView.wdInvokeEventHandler(InternalBusinessSystemMainView.java:477) at com.sap.tc.webdynpro.progmodel.generation.DelegatingView.invokeEventHandler(DelegatingView.java:87) at com.sap.tc.webdynpro.clientserver.event.CustomEventProcessor.handleServerEvent(CustomEventProcessor.java:45) at com.sap.tc.webdynpro.clientserver.window.WindowPhaseModel.doHandleServiceEvent(WindowPhaseModel.java:361) at com.sap.tc.webdynpro.clientserver.window.WindowPhaseModel.processRequest(WindowPhaseModel.java:128) at com.sap.tc.webdynpro.clientserver.window.WebDynproWindow.processRequest(WebDynproWindow.java:330) at com.sap.tc.webdynpro.clientserver.window.WebDynproWindow.processPhaseLoop(WebDynproWindow.java:341) at com.sap.tc.webdynpro.clientserver.cal.AbstractClient.executeTasks(AbstractClient.java:152) at com.sap.tc.webdynpro.clientserver.session.ApplicationSession.doProcessing(ApplicationSession.java:297) at com.sap.tc.webdynpro.clientserver.session.ClientSession.doApplicationProcessingStandalone(ClientSession.java:706) at com.sap.tc.webdynpro.clientserver.session.ClientSession.doApplicationProcessing(ClientSession.java:660) at com.sap.tc.webdynpro.clientserver.session.ClientSession.doProcessing(ClientSession.java:228) at com.sap.tc.webdynpro.clientserver.session.RequestManager.doProcessing(RequestManager.java:152) at com.sap.tc.webdynpro.serverimpl.defaultimpl.DispatcherServlet.doContent(DispatcherServlet.java:56) at com.sap.tc.webdynpro.serverimpl.defaultimpl.DispatcherServlet.doPost(DispatcherServlet.java:47) at javax.servlet.http.HttpServlet.service(HttpServlet.java:760) at javax.servlet.http.HttpServlet.service(HttpServlet.java:853) at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.runServlet(HttpHandlerImpl.java:390) at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.handleRequest(HttpHandlerImpl.java:264) at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:347) at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:325) at com.sap.engine.services.httpserver.server.RequestAnalizer.invokeWebContainer(RequestAnalizer.java:887) at com.sap.engine.services.httpserver.server.RequestAnalizer.handle(RequestAnalizer.java:241) at com.sap.engine.services.httpserver.server.Client.handle(Client.java:92) at com.sap.engine.services.httpserver.server.Processor.request(Processor.java:148) at com.sap.engine.core.service630.context.cluster.session.ApplicationSessionMessageListener.process(ApplicationSessionMessageListener.java:33) at com.sap.engine.core.cluster.impl6.session.MessageRunner.run(MessageRunner.java:41) at com.sap.engine.core.thread.impl3.ActionObject.run(ActionObject.java:37) at java.security.AccessController.doPrivileged(Native Method) at com.sap.engine.core.thread.impl3.SingleThread.execute(SingleThread.java:100) at com.sap.engine.core.thread.impl3.SingleThread.run(SingleThread.java:170)
Thanks
Nikhilhi Nikhil,
Null pointer errors are difficult to correct as is
If you have imported the BS from some other system make sure the BS has been imported correctly without errors & any Tech systems attached to it exist.
sachin. -
In solution manager system not showing all the system in SLD
Dear Gurus,
During the installation of solution manger sysyem i selected as a Central SLD as solution manager
Later installed ECC 6.0 and EP systems selected SLD as solution manager system during the instllation.
If i login in to http://hostname:50000/sld (solution manger system) and the screen also not showing all the options also. some options missing in the tab. Wat I need to do to see all the options clearly.
It is not showing all the systems if i check in EP and ECC for SLDCHECK it is not givng any errror.
But if i login into solution manger not able to see all the system in SLD.
RegardsThanks for reply
it is not showing all the systems -
Logical Sys Name for Business system in SLD for Third Party
Hi !!
I have little doubt what will be the logical system name for creating Business systems in SLD for third party?
thanks
GowriHi Gowri,
sorry, i dont agree with the other answers. The logical system name is required for ALE partner finding. If you dont want to communicate with IDocs you dont need it. If you want to send messages from third party system to R/3 via IDoc adapter, then you should (can) give a name. It can be configured in IB directory as well (adapter specific identifiers). Choose any name, this name will be used for the partner agreement in R/3.
Regards,
Udo
Maybe you are looking for
-
Converting tif with clipping path to solid spot color CS3
There must be a better way to do this, I need to make an opaque white spot color overprint the silo'd 4/C image (this is for a window cling). In the past I would duplicate the tif, convert to grayscale, fill with black, duplicate the placed tif, re-l
-
Hi, can someone explain me how can i put the <b>full content</b> of an itab in a attach and send it by mail? Thk, Regards
-
Publishing different than preview
I am working on a training video series about Moodle. I have carefully previewed the project to confirm that everything is timed correctly and matches the audio. However, the published version displays something much different than the preview. Err
-
Dear Team, One of my clients wants to promotion or increments of employees with effect from 01st May 2014. Due to lack of time client wants to update the infotype 8 only and after salary process over then wants to update the organization structure. P
-
Printing address dynamivally on smartform
Hi , I have requirement to print address on smartform but not through vendor number. Header First 2 lines is Corporate Address Read TVKO where VKORG= IS_BIL_INVOICE-HD_ORG-SALESORG and extract TVKO-ADRNR. Read Address Table (ADRC) where ADRC-ADR