Adding Button on application toolbar on ABAP List display screen....

Hello Gurus,
I copied SAP program 'RFBUEB00' into custom program. When I execute the custom report, I see the data lijne by line in ABAP list. I see a deafult 'Select' button on application toolbar.
If I want to add additional custom button on application toolbar on ABAP list display screen, how can I do it ? Please help.
Regards,
Jainam.
Edited by: Jainam Shah on Oct 27, 2009 5:44 PM

>
Jainam Shah wrote:
> In my case it just rights the data in ABAP screen as follows. I can't use ALV grid and stuff because its on older version.
>
>
FORM LISTE_SCHREIBEN.
>
>   check = '@T9@'.
>
>   FORMAT COLOR COL_KEY INTENSIFIED OFF.
>   WRITE: / SY-VLINE,
>            check,
>            BKPF-BUKRS,
>            BKPF-BELNR,
>            BKPF-GJAHR.
>   FORMAT COLOR COL_NORMAL INTENSIFIED OFF.
>   WRITE:   BKPF-BLART,
>        (8) BKPF-BLDAT DD/MM/YY,
>        (8) BKPF-BUDAT DD/MM/YY,
>            BKPF-WAERS,
>            BKPF-XBLNR,
>         80 SY-VLINE.
>   XAUSGABE = 'X'.
>   HIDE: BKPF-BUKRS, BKPF-BELNR, BKPF-GJAHR, BKPF-BSTAT, XAUSGABE.
>   IF BKPF-BKTXT NE SPACE.
>     FORMAT COLOR COL_KEY INTENSIFIED OFF.
>     WRITE: / SY-VLINE, CHAR4 UNDER BKPF-GJAHR.
>     FORMAT COLOR COL_NORMAL INTENSIFIED.
>     WRITE:   BKPF-BKTXT UNDER BKPF-BLART,
>              80 SY-VLINE.
>     HIDE: BKPF-BUKRS, BKPF-BELNR, BKPF-GJAHR, BKPF-BSTAT, XAUSGABE.
>   ENDIF.
> ENDFORM.
>
>
> I have to select multiple lines and proces them. For one line I know I can use AT-LINE-SELECTION but this is multiple lines...
What is your SAP system version?
It seems to be displayed only in ALV. Well, if you can make it to display in LIST ... you can go with set pf-status.
good luck

Similar Messages

How to deactive a button in application toolbar

how to deactive a button in application toolbar?

Simple example
This example shows how to create a toolbar with a single Exit button, used to exit the program.
Steps:
Create a screen and add a custom container named TOOLBAR_CONTAINER
Code:
   REPORT sapmz_hf_toolbar .
   TYPE-POOLS: icon.
   CLASS cls_event_handler DEFINITION DEFERRED.
G L O B A L   D A T A
   DATA:
     ok_code                    LIKE sy-ucomm,
Reference for conatiner
     go_toolbar_container       TYPE REF TO cl_gui_custom_container,
Reference for SAP Toolbar
     go_toolbar                 TYPE REF TO cl_gui_toolbar,
Event handler
     go_event_handler           TYPE REF TO cls_event_handler.
G L O B A L   T A B L E S
   DATA:
Table for registration of events. Note that a TYPE REF
to cls_event_handler must be created before you can
reference types cntl_simple_events and cntl_simple_event.
     gi_events                  TYPE cntl_simple_events,
Workspace for table gi_events
     g_event                    TYPE cntl_simple_event.
      CLASS cls_event_handler DEFINITION
   CLASS cls_event_handler DEFINITION.
     PUBLIC SECTION.
       METHODS:
         on_function_selected
           FOR EVENT function_selected OF cl_gui_toolbar
             IMPORTING fcode,
         on_dropdown_clicked
           FOR EVENT dropdown_clicked OF cl_gui_toolbar
             IMPORTING fcode posx posy.
   ENDCLASS.
      CLASS cls_event_handler IMPLEMENTATION
   CLASS cls_event_handler IMPLEMENTATION.
     METHOD on_function_selected.
       CASE fcode.
         WHEN 'EXIT'.
           LEAVE TO SCREEN 0.
       ENDCASE.
     ENDMETHOD.
     METHOD on_dropdown_clicked.
     Not implented yet
     ENDMETHOD.
   ENDCLASS.
   START-OF-SELECTION.
     SET SCREEN '100'.
   *&      Module STATUS_0100 OUTPUT
      text
   MODULE status_0100 OUTPUT.
     IF go_toolbar_container IS INITIAL.
Create container
       CREATE OBJECT go_toolbar_container
         EXPORTING
           container_name = 'TOOLBAR_CONTAINER'.
Create toolbar
       CREATE OBJECT go_toolbar
         EXPORTING
           parent = go_toolbar_container.
Add a button
       CALL METHOD go_toolbar->add_button
         EXPORTING fcode       = 'EXIT'            "Function Code
                   icon        = icon_system_end   "ICON name
                   is_disabled = ' '               "Disabled = X
                   butn_type   = cntb_btype_button "Type of button
                   text        = 'Exit'            "Text on button
                   quickinfo   = 'Exit program'    "Quick info
                   is_checked = ' '.              "Button selected
Create event table. The event ID must be found in the
documentation of the specific control
       CLEAR g_event.
       REFRESH gi_events.
       g_event-eventid    = go_toolbar->m_id_function_selected.
       g_event-appl_event = 'X'.    "This is an application event
       APPEND g_event TO gi_events.
       g_event-eventid    = go_toolbar->m_id_dropdown_clicked.
       g_event-appl_event = 'X'.
       APPEND g_event TO gi_events.
Use the events table to register events for the control
       CALL METHOD go_toolbar->set_registered_events
           EXPORTING
              events = gi_events.
Create event handlers
       CREATE OBJECT go_event_handler.
       SET HANDLER go_event_handler->on_function_selected
         FOR go_toolbar.
       SET HANDLER go_event_handler->on_dropdown_clicked
          FOR go_toolbar.
     ENDIF.
   ENDMODULE.                 " STATUS_0100 OUTPUT
http://www.erpgenie.com/abap/controls/toolbar.htm#Simple%20example
http://help.sap.com/saphelp_nw04/helpdata/EN/42/d2ab343e416635e10000000a1553f6/content.htm
help.sap.com/printdocu/core/Print46c/en/data/pdf/BCCITOOLBAR/BCCITOOLBAR.pdf
Regards,
Jagadish

How to disable the button in application toolbar in report pgm

Can anyone help with How to disable the button in application toolbar in report pgm

Hi,
You can use it_excluding to disable button on the tool bar.You have to find the function code for the required button and append that function code to the it_excluding .The optional IMPORTING parameter IT_EXCLUDING is an internal table. It is only needed if the caller uses the list tool standard interface but wants to deactivate interface functions which he or she does not need.You can have your defined pf-status using I_CALLBACK_PF_STATUS_SET.
SAMPLE PROGRAM
tables spfli.
type-pools: slis.
DATA W_FCODE TYPE SLIS_EXTAB-FCODE.
data: t_spfli TYPE SPFLI OCCURS 0 WITH HEADER LINE.
select * from spfli into table t_spfli.
data : t_excluding TYPE SLIS_T_EXTAB .
W_fcode = '&OUP'.
append w_fcode to t_excluding.
W_fcode = '&ODN'.
append w_fcode to t_excluding.
call function 'REUSE_ALV_LIST_DISPLAY'
EXPORTING
I_STRUCTURE_NAME = 'SPFLI'
IS_LAYOUT =
IT_FIELDCAT =
IT_EXCLUDING = T_EXCLUDING
tables
t_outtab = T_SPFLI
EXCEPTIONS
PROGRAM_ERROR = 1
OTHERS = 2.
if sy-subrc <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
endif.
http://help.sap.com/saphelp_nw2004s/helpdata/en/99/49b844d61911d2b469006094192fe3/frameset.htm
Regards,
Priyanka.

How to add a custom button on Application Toolbar for ME21N, ME22N & ME23N

Hi Experts,
I am new to this forum. I hope someone will help me.
My Requirement is as :
I want to add a new custom button on Application Toolbar for ME21N, ME22N & ME23N.
There are already standard buttons in this toolbar which is Document Overview On, Hold, Personal Settings etc.
So after the 'personal settings' button i want add a new button and want to write a code which will open one custom screen.
I am not able to find any exit for this....
Please help...
Thanks....

Hey Buddies
Try below BADI : ME_PROCESS_PO_CUST
and check with required methods.
1)PROCESS_ITEM
2)CHECK
3)POST
Regards,
Pranav

How to make buttons in application toolbar enable and disable

Hi ,
I have to shaow the buttons in application toolbar enable or disable dynamically , pls help

Check syntax of SET PF-STATUS status EXCLUDING fcode in online help...
Regards,
Raymond

Making buttons in application toolbar dynamic....

Hello,
I have a application tool bar with 8 icon buttons defined. Now I have a custom configuration table where I check what buttons in application toolbar should be seen so that user can select which button he wants to see and which not anytime he wishes.
My question is how can I make buttons in application toolbar dynamic ?
Please guide.
Regards,
Rajesh.

This is sample logic, but you can adapt it to you needs
DATA: excl_tab   TYPE sy-ucomm OCCURS 0 WITH HEADER LINE.
AUTHORITY-CHECK OBJECT 'ZREO' ID 'ACTVT' FIELD c_print.
IF sy-subrc NE 0.
    APPEND 'PRIN' TO excl_tab.
ENDIF.
IF ok_0010 = 'DISP' OR ok_0010 = 'DELE'.
    APPEND 'SAVE' TO excl_tab.
ENDIF.
IF ok_0010 <> 'DELE'.
    APPEND 'DELE' TO excl_tab.
ENDIF.
SET PF-STATUS 'STAT_100' EXCLUDING excl_tab.

Pushbuttons on application toolbar of basic list 1

Hi all,
I want to do BDC for sales order creation but before that my user want to validate item data based on some conditions (customised in system using user exit : idea is to avoid occureence of user exit by validating it on internal table level )
So I will display the data in the list format and user will check it...and then execute BDC...for that I want some pushbuttons on application toolbar of basic list 1.....(not on selection screen)
I am thinking of set pf-status...but how and where to set it?
Any idea please........
Thanks....

Hi,
You can place SET PF-STATUS just before the display list code.
Regards,
Sravanthi

How to Add button in Application Toolbar for Fb01(screen) Transaction

Hi All,
I need to Add a customized Button at Application toolbar for FB01 Tcode for standard screen.
I am unaware of this,please take it as an urgent issue and help me with your inputs.
Points will be given.
Thanks,
Ramesh

On which screen (in which standard status ?) to do what ?
You could try to bypass sscr key requirement using some BAdI like FI_HEADER_SUB_1300 to add a button to screen or identifying an implicit enhancement option in one PBO module/form to change PF-STATUS, then look for such an option in PAI module/forms.
Regards,
Raymond

Button at application Toolbar in Output

Hi friends,
                   In my classical report output,i want to add one button in application toolbar.so i have applied PF -STATUS for this. But when i am doing so..my standard buttons like back,cancel and save are automatically disabled..I dont want to write explicit code for back,save and cancel.. i want this button to work in addition to standard functionality..please guide me how to get this one..and also tell me to where write SET PF-STATUS 'STATUSNAME' in code..after which event..Also i have copied standard PF Status for it but it is not working
Thanks,
Gaurav
Edited by: Gaurav Kumar on May 25, 2009 3:11 PM
Edited by: Gaurav Kumar on May 25, 2009 3:12 PM

Hi Gaurav,
I have worked on same application but for ALV. Hcave look on following code it might help you.
CALL FUNCTION 'REUSE_ALV_GRID_DISPLAY'
EXPORTING
   I_INTERFACE_CHECK                 =
I_BYPASSING_BUFFER                = ' '
I_BUFFER_ACTIVE                   = ' '
    i_callback_program                = v_repid
    i_callback_pf_status_set          = 'SET_PF_STATUS'
    i_callback_user_command           = 'USER_COMMAND'
I_CALLBACK_TOP_OF_PAGE            = ' '
I_CALLBACK_HTML_TOP_OF_PAGE       = ' '
I_CALLBACK_HTML_END_OF_LIST       = ' '
I_STRUCTURE_NAME                  =
I_BACKGROUND_ID                   = ' '
I_GRID_TITLE                      =
I_GRID_SETTINGS                   =
IS_LAYOUT                         =
    it_fieldcat                       = fcat[]
IT_EXCLUDING                      =
IT_SPECIAL_GROUPS                 =
IT_SORT                           =
IT_FILTER                         =
IS_SEL_HIDE                       =
I_DEFAULT                         = 'X'
I_SAVE                            = ' '
IS_VARIANT                        =
IT_EVENTS                         =
IT_EVENT_EXIT                     =
IS_PRINT                          =
IS_REPREP_ID                      =
I_SCREEN_START_COLUMN             = 0
I_SCREEN_START_LINE               = 0
I_SCREEN_END_COLUMN               = 0
I_SCREEN_END_LINE                 = 0
I_HTML_HEIGHT_TOP                 = 0
I_HTML_HEIGHT_END                 = 0
IT_ALV_GRAPHICS                   =
IT_HYPERLINK                      =
IT_ADD_FIELDCAT                   =
IT_EXCEPT_QINFO                   =
IR_SALV_FULLSCREEN_ADAPTER        =
IMPORTING
E_EXIT_CAUSED_BY_CALLER           =
ES_EXIT_CAUSED_BY_USER            =
TABLES
    t_outtab                          = itab
EXCEPTIONS
PROGRAM_ERROR                     = 1
OTHERS                            = 2
IF sy-subrc <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
        WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
*&      Form set_pf_status
      Set PF-STATUS for user's push button
FORM set_pf_status USING rt_extab TYPE slis_t_extab.
SET PF-STATUS 'ZNEWSTATUS'.
ENDFORM.                    " PF_STATUS_NEW
*&      Form user_command
      Click on button gives popup information
FORM user_command USING ucomm LIKE sy-ucomm
selfield TYPE slis_selfield.
lv_ucomm
= sy-ucomm.
CASE lv_ucomm.
    WHEN 'BUTTON'.
      MESSAGE 'Working well' TYPE 'I'.
ENDCASE.
ENDFORM.                    "user_command
Hope it will resolve your prblm
Thanks
Lokesh.
Edited by: Lokesh Tarey on May 25, 2009 12:13 PM

Adding a button in Application toolbar of Transaction IW32

Hi ,
I need to add a button in the Application Toolbar of standard transaction IW32,I tried copying the pf-status and adding it in the user exit exit_saplocih_006 also,but its not working.
Please Kindly help.
Regards,
Ismail.

I think you must create a copy of IW32 ( I am not wrong in SAP lingo they say repair) for example ZIW32. And add a button relevant gui status. (I have been looking Gui status of IW32 it is have more status. you must find true status)
If you want change original source don't forget this a patch can change your code.

Custom Button on Application Toolbar of VA01

Hi,
I have a requirement where i need to put in a button on the application Toolbar of VA01. This should be placed next to Orders button. I tried to find Exits, Badi's and Enhancement Spots but was not able to.
There is one buton added and i have found the code for that but not able to understand how was it done.
I checked in SDN too and found a couple of threads which explains that it could be done with GUIXT.
Is this the only possible way or is there any other way in which this could be acheived.
If GuiXT is the only solution, then let me know how can this be done or started since i'm New to GUIXT i don't have any idea about it.
Thanks,
Prashanth

Hi,
Check Enhancement spot ES_SAPMV45A. Check implementations in program MV45AF0C_CUA_SETZEN_BUTTONS.
But be aware of the usage as you will need to replace a standard implementation.
regards
Nitesh

Adding pushbutton in application toolbar of HR programs using LDB

Hi all!
I have a requirement to add a pushbutton in the selection screen application tool bar for the HR programs when using LDB PNP.
Normally when we are using LDB in our program we will get a extra button provided by SAP after the execyte button. When we are creating a new button for this by using the table fields sscrfields with the function key as 2.
But, the statement "SELECTION SCREEN FUNCTION KEY 1" is not showing any pushbutton in the application toolbar.
The same question is already posted in SDN but no reply.
Please provide your suggestion.
Thanks,
Rajan U

Hi all!
I have a requirement to add a pushbutton in the selection screen application tool bar for the HR programs when using LDB PNP.
Normally when we are using LDB in our program we will get a extra button provided by SAP after the execyte button. When we are creating a new button for this by using the table fields sscrfields with the function key as 2.
But, the statement "SELECTION SCREEN FUNCTION KEY 1" is not showing any pushbutton in the application toolbar.
The same question is already posted in SDN but no reply.
Please provide your suggestion.
Ive found this keyword: SELECTION-SCREEN FUNCTION KEY n [ldb_additions]. Will this be useful??
Thanks,
Rajan U

Create button to application toolbar in report

Hi,
May i know how to create new button name continue near the save button or print button at the application toolbar?
Any suggestion ???

HI,
For creating a new button, write the name of the button on the tool bar for ex. &CONTI.
Double click on it, and choose the icon and function text ofr it.
Save and activate the menu.
Your button gets created in the menu.
Declare the variable in your program with the code for continue.
Here's an example,
form set_pf_status using rt_extab type slis_t_extab.
set pf-status 'ALV_MENU'.
endform.
form user_command using p_ucomm type sy-ucomm
data : vbeln type vbeln_va.
case p_ucomm.
when '&CONTI'.
ENDCASE.
Regards,
Pritha.
Reward if helpful.

How to Deactivate the Button in Application Toolbar

Dear ABAPers,
             I would like to deactivate the Release button in CO01 Transaction.How to do this.Please Help me to solve this problem.
Thanks & Regards,
Ashok.

Hi,
You can do it 2 ways,
One is
Code a Function code for the button in the Application toolbar that you want to disable.
For example, I am trying to disable the SAVE button on the Application toolbar. The Function Code that I have coded is 'SAVE'.
module STATUS_0100 output.
     APPEND 'SAVE' TO T_PFSTATUS.
SET PF-STATUS 'STATUS' EXCLUDING T_PFSTATUS.
endmodule.                 " STATUS_0100 OUTPUT
The second way is to create a transaction variant using SHD0
Give the Transaction code(ZTRAN) for which you want to create a variant -> name of some variant (ZVAR) -> create -> takes you to your transaction -> enter -> Menu Functions -> Double click on the button that you want to deactivate -> it turns yellow -> Click on Exit and Save -> Save and go back -> You can see a screen variant created (ZVAR_0100)
Now Goto -> Create variant transaction -> Give your transaction variant name (ZVAR) -> Select Transaction with variant -> Takes you to SE93 transaction -> The transaction variant name appears -> save
Now your new transaction is ZVAR -> Execute it and you will find the button deactivated
Check this for verifications
[http://help.sap.com/saphelp_nw70/helpdata/EN/43/132f9803d76f40e10000000a422035/content.htm]

Want o add button to application toolbar of CO12

Hi,
I want to add one button to application tool bar of CO12 transaction.
Let me know the procedure to achieve the same
Thanks in advance,
Nag

Hi,
Any alternative would also do.
Please help
Thanks,
Nag

Adding Button on application toolbar on ABAP List display screen....

Similar Messages

Maybe you are looking for