Adding cipher support for Cryptsetup

I have an encrypted partition that I created in another distro, and I can't unlock it in arch linux. The problem is that the proper ciphers are not installed.
cryptsetup luksDump on the partition gives this information:
Version: 1
Cipher name: serpent
Cipher mode: xts-essiv:sha256
Hash spec: sha1
However, when I check my supported ciphers with cat /proc/crypto, I get
name : ecb(arc4)
driver : ecb(arc4-generic)
module : ecb
priority : 0
refcnt : 3
selftest : passed
type : blkcipher
blocksize : 1
min keysize : 1
max keysize : 256
ivsize : 0
geniv : <default>
name : arc4
driver : arc4-generic
module : arc4
priority : 0
refcnt : 3
selftest : passed
type : cipher
blocksize : 1
min keysize : 1
max keysize : 256
name : stdrng
driver : krng
module : kernel
priority : 200
refcnt : 1
selftest : passed
type : rng
seedsize : 0
In Ubuntu I've checked to make sure they are installed this way. I imagine its the same in Arch. What packages do I need to install to use serpent in XTS mode?

did you load the module?
try:
modprobe aes-i586 #or maybe more like:
modprobe aes-x86_64 #depending on your architecture
http://wiki.archlinux.org/index.php/Sys … el_modules
Last edited by atcq (2009-08-10 23:14:26)

Similar Messages

[svn:osmf:] 15972: ChromeLibrary: adding rudimentary support for loading plug-ins defined in XML.

Revision: 15972
Revision: 15972
Author:   [email protected]
Date:     2010-05-08 07:31:24 -0700 (Sat, 08 May 2010)
Log Message:
ChromeLibrary: adding rudimentary support for loading plug-ins defined in XML.
Modified Paths:
    osmf/trunk/libs/ChromeLibrary/.flexLibProperties
    osmf/trunk/libs/ChromeLibrary/org/osmf/chrome/application/ChromeApplication.as
Added Paths:
    osmf/trunk/libs/ChromeLibrary/org/osmf/chrome/configuration/PluginsParser.as

rnair wrote:
I am trying to install Oracle 11g R2 on my windows 7, 64bit computer. After 42% of installation, it started showing some files are missing. Few of them are:
C:\app\User\product\11.2.0\dbhome_1\owb\external\oc4j_applications\applications\WFMLRSVCApp.ear
C:\app\User\product\11.2.0\dbhome_1\oc4j\j2ee\oc4j_applications\applications\WFMLRSVCApp.ear
C:\app\User\product\11.2.0\dbhome_1\owb\external\oc4j_applications\applications\WFMGRApp.ear
C:\app\User\product\11.2.0\dbhome_1\oc4j\j2ee\oc4j_applications\applications\WFMGRApp.ear
C:\app\User\product\11.2.0\dbhome_1\owb\bin\win32\owb.tmp
C:\app\User\product\11.2.0\dbhome_1\owb\bin\win32\setowbenv.tmp
C:\app\User\product\11.2.0\dbhome_1\oc4j\j2ee\OC4J_DBConsole\config\system-application.xml
And the final pop up winow says:
Database configuration Assistant:Info
*"Template General_Purpose.dbc does not exists. Please specify an exixting template for database creation"*
*"[INS-20802] Oracle Database Configuration Assistant failed"*
Details:
Cause:- The plug-in failed in its perform method
Action:- Refer to the logs or contact Oracle Support Services.
Following are the last few lines of the log file. Can anyone please help me to fix this problem?<snip>
the error has nothing to do with DBCA. DBCA was simply the last in a long string of victims.
Go back and read the instructions where you downloaded the install media. They state that the TWO zip files you download must be unzipped into the same directory.

[svn:cairngorm3:] 16403: Added runtime support for latest module library ( LazyModuleLoadPolicyTag).

Revision: 16403
Revision: 16403
Author:   [email protected]
Date:     2010-06-02 12:47:11 -0700 (Wed, 02 Jun 2010)
Log Message:
Added runtime support for latest module library (LazyModuleLoadPolicyTag).
Modified Paths:
    cairngorm3/trunk/libraries/Module/src/com/adobe/cairngorm/CairngormModuleXMLSupport.as
    cairngorm3/trunk/libraries/ModuleTest/src/CairngormModuleLibRuntimeSample.mxml
    cairngorm3/trunk/libraries/ModuleTest/src/runtimeContext.xml

Bing,
I think one thing you might want to do is to post your code on the Web somewhere. Maybe you can open a Weblog and post this there.
http://www.jroller.com will let you open a blog for free we'll love to see more customers of JDeveloper opening weblogs and sharing their experience over the Web.

[svn:osmf:] 16099: Added HTML support for a Banner Region.

Revision: 16099
Revision: 16099
Author:   [email protected]
Date:     2010-05-13 13:26:58 -0700 (Thu, 13 May 2010)
Log Message:
Added HTML support for a Banner Region.
Modified Paths:
    osmf/trunk/apps/samples/framework/ExamplePlayer/html-template/index.template.html

Hello Alex,
I don't have an answer for you.
But, can you try to use http://drmtest2.adobe.com:8080/Content/anonymous.f4v with locally hosted OSMF player? This content doens't require user/pass info.
I'm wondering that Google TV's flash player doesn't support prompt dialog.
http://drmtest2.adobe.com/AccessPlayer/player.html requires flash player 11. That's why it won't be loaded with flash player 10.x.
Thanks,
-- Hiroshi

Could Adobe please advise if they will be adding tethering support for Nikon D600

Could Adobe please advise if they will be adding tethering support for Nikon D600 as it is instrumental to our decison regarding purchase.
Many thanks

ssprengel wrote:
Nobody is happy with the answer about old software not getting updated with new cameras, but if you look into it, Adobe had to lay off about half their employees over the past few years to keep the company viable in the declining economy, so they don’t have extra people to update and test plug-ins for non-current versions, and if they did, then some people wouldn’t buy the newer version and they’d have even less money.
Adobe has only just gotten the D600 supported for raw format in their current beta version of LR, which affects everyone with a D600, and if they had to wait for Nikon for supply and SDK and also have to prioritize their work to keep things on schedule, tethering is likely to lag behind raw-file support for any particular camera. Apple controls their entire computer environment, hardware and software, so it’s not surprising they can implement tethered capture from day one, but Adobe must figure things out for OSes they don’t own, both Mac and PC, so they rely on waiting for Nikon to do things for them, and then figuring out how to get it to work.
Well boo hoo for Adobe ... life sure is tough for them ... if they can't handle the load maybe they should get out of the business of software development ... They can't be all that worried about revenue to support Lightroom development or they wouldn't have reduced the price of the full version by 50% and the upgrade price by 20% ... it was a less than smart move considering they have been bragging for the past couple of years about how many more folks use Lightroom vs. other competitive options ...
Aperture 3, Capture One both have tether support for the D600 ... and many more cameras than are supported by Lightroom ... those developers are working and engineering solutions in the very same economy as Adobe (and C1 supports both platforms as well, costs much more than Lr and employs far fewer engineers) ... why aren't they suffering from the same lack of support? ... or using the camera makers to deflect blame for the lack of results?
Excuses are not solutions ...

Adding AJAX support for dynamically created panelGrid components

Hi everyone!
I would like to ask help from anyone who may have encountered similar problem before...
I have a panelGrid whose component is dynamically created by the backing bean. Here is my JSF code:
<h:panelGrid styleClass="panelGrid"
          rowClasses="tsPanelGridRowClass" columns="8" cellpadding="0"
          cellspacing="2" bgcolor="transparent" style="margin-left: 10px"
          id="revCenterItemPanelGrid"
          binding="#{pc_Touchscreen_pull_select_item.revCenterItemPanelGrid}">
</h:panelGrid>And here is the code for backing bean that adds content inside the panelGrid:
HtmlOutputText index = (HtmlOutputText) app.createComponent(HtmlOutputText.COMPONENT_TYPE);
index.setId("1");
index.setValue(String.valueOf(1));
index.setStyle("datagridtext");
revCenterItemPanelGrid.getChildren().add(index);On click of a button...
<a4j:commandButton value="Update"
          styleClass="commandExButtonPou2" id="button1" reRender="revCenterItemPanelGrid"
          actionListener="#{pc_Touchscreen_pull_select_item.doSortActionListener2}">
          <f:attribute name="order" value="2"></f:attribute>
          <f:attribute name="toggleState" value="off"></f:attribute>
</a4j:commandButton>the backing bean is supposed to update the value of the outputText
doSortActionListener2() {
HtmlOutputText index = (HtmlOutputText) app.createComponent(HtmlOutputText.COMPONENT_TYPE);
index.setId("2");
index.setValue(String.valueOf(2));
index.setStyle("datagridtext");
revCenterItemPanelGrid.getChildren().add(index);
}However, update doesn't seem to work. I have been successful in adding ajax support to a panelGrid that is not dynamically created but not for this one.
Has anyone encountered this error before? Any ideas?
Thanks in advance!

Hi everyone!
I would like to ask help from anyone who may have encountered similar problem before...
I have a panelGrid whose component is dynamically created by the backing bean. Here is my JSF code:
<h:panelGrid styleClass="panelGrid"
          rowClasses="tsPanelGridRowClass" columns="8" cellpadding="0"
          cellspacing="2" bgcolor="transparent" style="margin-left: 10px"
          id="revCenterItemPanelGrid"
          binding="#{pc_Touchscreen_pull_select_item.revCenterItemPanelGrid}">
</h:panelGrid>And here is the code for backing bean that adds content inside the panelGrid:
HtmlOutputText index = (HtmlOutputText) app.createComponent(HtmlOutputText.COMPONENT_TYPE);
index.setId("1");
index.setValue(String.valueOf(1));
index.setStyle("datagridtext");
revCenterItemPanelGrid.getChildren().add(index);On click of a button...
<a4j:commandButton value="Update"
          styleClass="commandExButtonPou2" id="button1" reRender="revCenterItemPanelGrid"
          actionListener="#{pc_Touchscreen_pull_select_item.doSortActionListener2}">
          <f:attribute name="order" value="2"></f:attribute>
          <f:attribute name="toggleState" value="off"></f:attribute>
</a4j:commandButton>the backing bean is supposed to update the value of the outputText
doSortActionListener2() {
HtmlOutputText index = (HtmlOutputText) app.createComponent(HtmlOutputText.COMPONENT_TYPE);
index.setId("2");
index.setValue(String.valueOf(2));
index.setStyle("datagridtext");
revCenterItemPanelGrid.getChildren().add(index);
}However, update doesn't seem to work. I have been successful in adding ajax support to a panelGrid that is not dynamically created but not for this one.
Has anyone encountered this error before? Any ideas?
Thanks in advance!

Adding ldap support for postfix

using darwinbuild
I have read several discussion:
http://discussions.apple.com/thread.jspa?messageID=1240972
http://discussions.apple.com/thread.jspa?messageID=658174&#658174
in reading these i noted that I have to create the directory
/Appleinternal/Developer/Headers and place the appropriate headers in there.
This is where I'm stuck looking for the right headers for LDAP.
smtp1:/usr/include root# ls | grep ldap
ldap.h
ldap_cdefs.h
ldap_features.h
ldap_schema.h
ldap_utf8.h
Are these the header files i need to place in the Developers/ldap directory?
What All needs to be in here?
here is the build from the postfix makefile
build :
echo "ENV = $(ENV)"
$(ENV) $(MAKE) -C $(SRCROOT)/$(PROJECT) makefiles OPT="-DBIND8COMPAT -DHAS_SSL -DUSESASLAUTH -D_APPLE_ \
-I/AppleInternal/Developer/Headers/sasl -framework DirectoryService $(CFLAGS)" \
AUXLIBS="-L/usr/lib -lssl -lsasl2.2.0.1 -lgssapi_krb5"
$(ENV) $(MAKE) -C $(SRCROOT)/$(PROJECT)
the ldap book 'O'reilly" pg. 148 to enable client support for postfix;
CCARGS="-I/usr/include -DHAS_LDAP" \
AUXLIBS ="-L/usr/local/lib -lldap -llber "
i get the same info from http://www.postfix.org/LDAP_README.html
i do not see lldap and llber in /usr/lib anwhere. do these files get created in the build or do I have to find them? are these the current options?
TIA
-j

1. Make sure you do not forget the sasl headers.
okay, sasl in addtion to ldap information.
2. Did you recompile LDAP, or just use the one that
was there on your Tiger default install?
No i did not recompile ldap. Although the thought did cross my mind when i saw that my ldap version was 2.2.19
If you did
re-compile, make sure you used the one from darwin
sources.
Darwin source is 2.2.19
Current version on OpenLDAP site is 2.3.20

What is SONY'S stance on adding ATMOS support for the STR-DA5800ES?

Other companies have announced support for slightly older receivers. The Sony is a 9.2 AVR's so it would just be software based.

Hi Wiggum,
Welcome to Sony Community!
Part of the improvement included on the latest firmware update for Sony STRDA8500ES is for Dolby Digital Plus.
If Dolby Atmos will be available on the next update, you will be able to find that out at this link:
http://esupport.sony.com/US/p/model-home.pl?mdl=STRDA5800ES&template_id=1&region_id=1&tab=download#/...
If my post answers your question, please mark it as "Accept as Solution"
Vincent

Adding drop support for JPanel in 1.4

Hi there.
I'm sorry for this naive question, but I just had to...
For implementing drop support in a JPanel can we use the new dnd features of 1.4 or do we have to do it using the "old style"?
I mean, do we have to implement the DropTargetListener interface and define it as a DropTarget or is there a simpler way?
Cheers,
/rp

Hi there.
I'm sorry for this naive question, but I just had to...
For implementing drop support in a JPanel can we use the new dnd features of 1.4 or do we have to do it using the "old style"?
I mean, do we have to implement the DropTargetListener interface and define it as a DropTarget or is there a simpler way?
Cheers,
/rp

Ffmpeg support for stepmania-cvs

I have been looking into adding ffmpeg support for the stepmania-cvs package. The main problem is that StepMania will continue to depend on the old 0.4.9-pre1 version of ffmpeg in order for video support to work properly. Following the directions on the StepMania website were not that helpful but I have found a slightly easier way to build StepMania with ffmpeg built into the application; a lot of the time was spent trying to find a decent configuration. The 0.4.9-pre1 version of ffmpeg would only be required to build StepMania but, since the required ffmpeg libraries will be built into StepMania, it is not required to run the application so the older version of ffmpeg can then be uninstalled or be replaced with the current ffmpeg package in extra.
I was wondering whether the people who are using stepmania-cvs would want ffmpeg support included and would be willing to put up with the hassle of installing a custom ffmpeg package during every install and upgrade. The stepmania-cvs package will only be updated when a new Windows CVS snapshot is released if people want this change. I want stepmania-cvs to closely resemble what is included with the Windows snapshots and the current CVS snapshot does include video support in the application.
The video support isn't that great with either the version that I have built or with the Windows CVS snapshot. Playing video seems to bog down StepMania a bit; it isn't really noticable most of the time. I have messed around with the StepMania 3.9 source code and video playback is a lot better with that version.
In case anyone is wondering, I have thought about making a PKGBUILD that would build StepMania 3.9 from source instead of using the pre-built binary package like the current one does. The main reason for continuing the use of the binary package was because of the ffmpeg issue, including conflicting with any current ffmpeg installation, and because there is no option to build StepMania 3.9 without ffmpeg support. Now, it is because StepMania 3.9 will not build with the current version of sdl in the Arch repository; it will build with the 1.2.9 package. So, I am still going with my stance of not worrying about making a PKGBUILD that makes StepMania 3.9 from the source code.
This has been a long winded post but I would really appreciate any feedback on this issue. I would personally like to have ffmpeg support in the stepmania-cvs package but I don't want to inconvenience others if other people don't want to deal with the hassle of getting ffmpeg support working.
Random: Something that is a lot better with the Linux version of StepMania 4.0 CVS are the load times. With the current Windows CVS snapshot, it takes like 5 seconds to go to the song selection screen, no matter if it is after loading StepMania for the first time or after playing a song, while the Linux version takes around 1 second.

I guess that nobody will have a problem with video support being added to the stepmania-cvs package. I just updated stepmania-cvs with the necessary changes for video support to work. Just like when the stepmania package was uploaded to the AUR, I posted a little howto for installing stepmania-cvs with the most recent changes. The howto is the last comment posted on the AUR page for stepmania-cvs. I am also messing around with making a custom repository. So far, I have put up some of my packages from the AUR. The repository will include pre-built packages of stepmania and stepmania-cvs. In order to access my repository, add the following two lines to /etc/pacman.conf:
[ryochan7]
Server = http://bored.homelinux.net/arch/ryochan7
Then run pacman -Sy. My upload connection isn't that great (peaks around 45 KB/s) so it might take a while to download any package from my repository.

Raw Support for Panasonic LX-5

In trying to keep aware of when raw support might be added for my 2 month old LX-5 I came across an update that someone had referenced from January of this year that added raw support for the LX-5 and some other cameras, when I tried to download it my computer said the latest update on my computer was newer than that. Does that mean I should already have it? If not does anyone know when it will be added? When I first took pictures with my camera I had images saved in raw and j-peg and i photo only recognized the j peg formatted pictures. The j pegs are beautiful but I would like to experiment with raw.

I reply now only to validate my ignorance..
I think what happened is the update that added the lx-5 raw support came out a couple weeks after I got the camera, so I tried it initially and was not able to import raw files and gave up and went to j peg. I tried again this morning after posting, and have been happily dealing with raw files all morning.
Love the camera and am glad i photo will allow me to realize all that it can do!

Aperture support for Nikon D7100?

Lightroom now has support for Nikon D7100. Does anybody have any suggestions when Aperture will provid support?

There has always been, and likely always will be a bit of leap frog, one upsmanship with the timetables for competing developers when adding RAW support for new cameras. None of the developers who offer solutions for RAW processing have the market cornered in this respect.
While I too have concerns ... it should be pointed out that the view across the fence is not as attractive as one might think.
On Oct. 23, 2012, Apple added RAW support and tether support for the Nikon D600 ... while Lightroom did add RAW support for the D600 about the same time, Adobe has yet to offer tether support for the D600. In fact, Lightroom only supports a small select few cameras for tethering.
Of course this may not be of interest for Aperture users who do not rely upon the tethering feature ... I simply point out this situation in order to illustrate that Lightroom is not a panacea of perfection ... and don't get me started on how horrid the Lightroom Slideshow and Book modules are compared to what Aperture offers.
Likely, Apple will offer an update sooner rather than later.

HT4757 RAW support for the SONY RX100?

Anyone know when will Apple be adding RAW support for the SONY RX100?

Unfortunately this is a user forum, so no-one can answer that one for you. You can use the feedback option in aperture to request it though. More than likely it wont come until Canon or Nikon release some more DSLRs, which is usually what prompts an update. For what it's worth you can use the Adobe DNG converter which will convert the sony .arw file into a .dng file that Aperture can read. It is another step to your workflow but you can do it.

Plugin support for a GUI

Hi,
I am in the process of adding plugin support for a Java-based GUI and have the following question: is it possible for the plugin to be non-Java code - that is, is it possible to load/execute a plugin software that is not written in Java. For example if I had a C program to do something, can I invoke that program as a plugin from a Java application? Any pointers that would help me to achieve this would be great help.
Thanks.

Intune is an OS management solution that among other things will push software to managed systems. Intune uses an agent installed on the managed systems to accomplish its tasks.
Depending on the meaning of the word "client", Intune is probably not what you are looking for. Are you an IT organization managing "client" computers or are you a software vendor with "clients/customers" who use your application?
Jason | http://blog.configmgrftw.com | @jasonsandys

I have been a customer with Verizon, since 1996. Recently, my husband has been added onto my account. We have both been experience drop calls. My husband contact Tech support for over 2 weeks. We were pretty upset to be paying a lot of money for a service

I have been a customer with Verizon, since 1996. Recently, my husband has been added onto my account. We have both been experience drop calls. My husband contact Tech support for over 2 weeks. We were pretty upset to be paying a lot of money for a service that didn't work. Verizon advised us that would upgrade both of our phones (to see if that solved the problem). Ok...this is where Verizon has forgotten customer service rules. He order 2 phone...one for himself, one for me. 1st the wrong address on the package..Fedex couldn't deliver...2nd...missing condo number Fedex couldn't deliver again...(2nd call to Verizon)...3rd package was finally deliver with 1 phone...missing my phone. Contacted verizon rep...reorder my phone again..but sorry we cannot give the same price as quoted on 21April...even though...its our mistake...Ok...Ok..what a surprise..but we can do this...after 65 minutes...found a price that was a little bit more...fine...just order the phone....I reordered phone on 28April...on the April 29...no email..so I can Verizon for the 4times in a few days..sorry your order was delay due to our Fraud dept. OK...talked to fraud dept...ok..account is good..will release phone and ship. OK...Next day, no email with deliver confimation. Contact Verizon 5 times now...sorry..your order was cancelled...YES...cancelled again...2nd time now...but we can reorder...OK...sorry but we cannot honor that price that was quoted..really...agent messed up...again...but we can do this for you....I don't understand...your mistake...ALL the times...
Strange ...how my order gets cancelled twice by Verizon's mistake....yet you cannot honor prices that your agents quoted!!!
I didn't reorder the phone....I cannot in good faith same with a company that does not stand behind their own mistakes...and worse...they make the poor customer pay for it...
I will not be renewing my contact...its time to Cricket Wirless...which my sister-in-law loves for half the cost....

I hope that you aren't complaining about dropped calls INSIDE your condo because no amount of switching or upgrading devices will solve that.
VZW will not guarantee service inside of any structure. There are just too many factors. If the problem is inside then you might want to look at one of the following:
1.) Network Extender (may cause issues for others in a condo or apartment style setting)
2.) A Google Voice Number (Free with a Gmail email address), downloading Google Hangouts Dialer and forwarding your calls to the GVN so that you can make and receive calls over Wi-Fi.

Adding cipher support for Cryptsetup

Similar Messages

Maybe you are looking for