Adding classification info into 0FIAP_C03(FIAP: Line Item)

I'd like to add vendor classification infomation into exist 0FIAP cube whihc is filling through 0FI_AP_4 DS. For each vendor I've just 1 class which is include 2 characteristics. I mean vendor and class relation is 1 to 1.
Allready I have created a DS in R/3 through CTBW for class type 010 and data is commimg into DS. Ichecked in RSA3. Then I replicated DS into BW system and Infoobjects are created by CTBW_META(I have 3 infoobjects 1 for class and 2 for characteristics)
I am not sure if I have done the best I could do for this issue or not? Also I don't know how should I joine this characteristic(s) into cube to make sure data will fill correct. Should I create a new InfoSource to fill new data into cube or I should add new DS into an exist InfoSource whch fills cube?
Thanks for your reply in advance,

Hi Sudeep,
Thanks for your reply. In fact in a report we rank vendors from FI side. I mean I need a report of vendors based on their account amount.
we have diffrent type of vendors like "row material provider", "Consultants" and so on. I wanna make a report, for example, top 5 "row material provider" vendors based on theirs account amount. We assign vendor types through classification module in SAP.
Edited by: Omid Daghdar on Jan 23, 2011 10:27 AM

Similar Messages

  • Query on FIAP:Line item cube

    hi bw friends
    I would like to know that the cube FIAP:Line item (0FIAP_C03) enables us to view about what?
    for example
    the infocube enables you to view information about sales and billing documents from R/3
    such as:
    dealer wise/customer wise monthly sales and sales return
    sales representative wise monthly sales and sales return
    branch wise sales and sales return.
    i would like to know what does the cube FIAP:Line item enables us to view?
    thank you

    The 0FIAP cubes extracts data from Account payables module from R3. The cube gives you the information about the payables(How much the company has to pay its vendors). The best use of the cube can be done for ageing analysis of payables. The characteristics used can be vendor wise, material wise, company code wise etc..

  • Combine PR into one PO line item

    is there a way i can combine into 1 PO line item a list of PR
    which are having common item. we are not using the material master btw.
    Eg. 2 PR are raise from 2 diff cost center having same item
    PR No. 1001-  Microwave  1PCE Cost Center - 2000
           1050 - Microwave  2PCE Cost Center - 3000
    Is there a way i can combine this 2PR into 1 PO 1 line item?
    And during Invoice verification - the charging will be posted per each cost center
    Pls. advise.

    Try to accumulate in multiple account assigment.
    for this u have to set multiple account for one Cost Center 'K'.
    for this SPRO --> MM --> Purchasing --> Account assigment
    Select 'K' and in First Screen, define
    Account Assingment - Multiple accounts
    again in PO, for Different Qty, fill diffrent cost center and G/L account as per our requiremnts.
    this may solve ur problem.
    Pardeep Malik

  • Merge several PR line into into 1 PO line item with ME57-Assign and process

    Our process is run MRP to generate Purchase requisition, system generate 1 PR number for each materials. Happening that there are multiple PR for a same material number and same delivery date. When we convert PR to PO using tcode Me57 - Assign and Process PR, system always generate different line item for each PR even the materials and the requirement date is the same.
    How to merge 2 or a few PR line items for a same material and same requirement date into 1 purchase order line item?

    You should use the "shopping cart'' in the "Delivery Schedule" Tab page of the PO to achieve your requirement.  Basically, in this case, you should use ME21N transaction with ''Document Overview" feature to select related PR line items and drag them into this shopping cart.

  • Duplicate of unloading point info in PR for line items

    We have a Vendor Stock Inventory (VSI) scenario where when we we create Reservation for VSI material then PR is getting created automatically.
    Now we found out that when we create reservation for multiple line items giving different unloading point but when single PR is getting created for mulitple line items , all line items have same unloading point which is incorrect behaviour beacuse while creating reservation we have given different unloading point on line items.
    We are using bapi BAPI_REQUISITION_CREATE to create PR.
    Any clue to this problem . Is this standard SAP bug?? If yes any OSS note on this.

    There was bug in the exit program and this is now resolved.

  • Request to Make Withholding Tax info changeable on Cleared Line items

    Hello all,
    I got a new requirement where the client wants to change the withholding tax information in vendor cleared items. some documents got posted with wrong WT T type, now they want to make the changes to submit 1099 report. Withholding tax info is updated in vendor master and it is picking up defaultly while making the postings to the vendor through FB60.Even this field  (Withholding tax type)  is not changeable in Withholding tax info tab of the FB60. i try to make the settings through Tcode OB32 (document change rules)  but unfortunately this field is not editable in withholding tax information, while open the document through change mode. The field is WITH_ITEM-WITHT (Withholding tax type).
    Please can anyone help me who works on this.
    Thanks & Regards,
    Edited by: p.venkateswarareddy on Jan 20, 2010 9:21 AM

    Dear Kumar
    The relevant withholding tax types change, for example, as a result of legal changes. A withholding tax type is relevant if the following conditions apply:
    1. The withholding tax type is entered in the SAP master record of the business partner and indicated as subject to withholding    tax (vendor).
    2. The company code is indicated as authorized to deduct tax for vendors or as subject to withholding tax for customers for this withholding tax type (withholding tax data for company code: View V_T001WT)
    3. The posting date is in the validity period for the deduction authorization (withholding tax data for company code View V_T001WT).
    Chintan Joshi.

  • Line item Ship-to Info is not the same in Header Ship-to Party During Sales Order Creation via IDOC

    We have observed that during creation of sales order using idoc, the line item ship-to party is not the same with header ship-to. The ship-to party info in line item is equivalent to the header's sold to party. To give you a quick background, Sold to party info is given in idoc and ship to party is being determined using table EDPAR. In this specific scenario, sold to customer is not the same with ship to customer.
    Initial checking on the code leads us in function module VIEW_KUAGV. This FM populates partner details of sales order header and line item in program LVEDAF1Z
    Below is the code for Sales order Header. Notice that WE_INPUT parameter which contains Ship to party is passed as exporting parameter in FM VIEW_KUAGV. This is the reason why Ship to Party is populated correctly in sales order header but not in sales order item.
    Initially, it first set to Sold-To Party. However, if WE_INPUT is given or provided, partner details is set to Ship-To Party.
    Please advise on how we can make the ship to party info in header and line item be consistent. This is SAP Standard program which why we are hesitant to make change on the program. If there is a configuration to make this happen, kindly advise.

    Hi Jayesh,
    If I understand you correctly, you want that when creating SO from Quoatation
    the Ship to Party also follow/copy Ship to Party from Quotation, right?
    Just to confirm with you, when you creating SO reference from Quotation, you
    use copy/follow-up function, am I right?
    You can do this by setting in configuration of Copy Control (like mentioned by Hui).
    Step as follow :
    1. Go to IMG->CRM->Transactions->Basic Settings->Copying Control for
        Business Transactions
    2. Create your BAdi (Business Add-In for Copying Control), such as get Ship to
        Party value from source document and use it in current document
    3. Use this Rule you have created in BAdi (no. 2), in copy control transaction type
        IMG->CRM->Transactions->Basic Settings->Copying Control for
        Business Transactions-> Define Copying Control for Transaction Types
    4. Here you set Copying Routine for your transaction types (put name of your Badi
        created in step no. 2)
    Or alternatively, you can set it on access sequence in Partner Function
    Ship to Party in configuration. You can define access sequence the Ship
    to Party is taken from Preceeding Document -> Ship To Party
    1. Go to Partner Function access sequence :
        IMG->CRM->Basic Functions->Partner Processing->Define Access Sequence
    2. Create new access sequence with following entry :
        - Source COM_PARTNER_A (PrecedingPartner)
        - Check Mapping for Partner Being search
        - Partner Function in Source  = Ship To Party
    3. Assign this Access Sequence in you Partner Function used in Sales Order Transaction
    Tell me if this is what you looking for

  • Line item type Info Object ????????/

    Hi friends
       just for clarification is there any 0 Info Object available for Line Item Type field (i.e,  LINETYPE (char 5) in FAGLFLEXA Table)....or do I need to create a custom object...

    No need to waste much time here. If you are not able to find any relevent IO in Buisness content also , then create a new z-info object.
    With rgds,
    Anil Kumar Sharma .P

  • Sales Order Line item

    Hi Experts,
    when we enter Material- 101 with a quantity of 1000 and by mistake if we enter the same Material- 101 again with quantity of 1000, It is appearing as another line item  and the quantity shows 2000. My requirement is If we did this mistake ,we want all those quantities of one material should added up and show as one line item.How to control this, Please throw some light on this.

    Hi there,
    Standard SAP willnot combine the 2 line  items into 1. It will take as separate line items. But when doing availability check, it does for 2000 items since the materials are same.
    If you have not processed  the order further, delete the line item or enter a reason for rejection sothat it willnot be further processed.
    If you want the system to add the line items, then you need to do customization in MV45AFZZ. Put a code that in a sales order, 2 line items have the same material num MATNR, then they shoould be combined into single line item.
    Check with your ABAPer on this.

  • Customer line items ...dispute case

    when i go into the customer line item report (FBL5N) and click on a record it opens up a page where we see a button for 'Dispute Case'and i went there and changed the reason for case and saved it and came back to the fbl5n customer line item screen and checked the record against which i changed the reason for case, but it didnt changed the reasion on the record but when i go into the record and try to view it in additional details it shows me the one i have made changes. not able to understand why it is not showing in the list of line items when it is showing inside the record details that it has been changed,even i did refreshed it . Our end user wants to see the changed reason code on the line items page wich is on the AR side when we change the reason for case on the dispute side.
    its kind of urgent please put some light onto it, any help would be highly appreciable...

    sounds like changing the ALE from system 1 to the other system.
    However I doubt it will be that easy.
    I believe that could should contact SAP SLO to work out the best route for data migration.

  • Copy service line items to new line items in the same contract (ME32K)?

    Hello friends,
    Requirement: There are many contracts (account assignment K) has service line items  (type 9). I need to copy a contract line item along with its service line items (1 or more) into a new line item in the same contract. I tried bapi_po_change but it says Contracts can't be processed with it, as only in this bapi we have a structure for ESLL services. BAPI_CONTRACT_CHANGE or create don't have structure for to achieve this through a bapi or a fm?
    So, in what way I could accomplish this? I came across some threads, which was helpful, but is not solving the purpose
    Any guidance here would be of great help.
    Thanks in advance.

    This BAPI can be used to create new service items in the contract but won't change existing lines. You can query the contract lines that you want to copy and later call the BAPI to recreate them

  • One line item in po from multiple line items of Purchase Requisition

    Can we merge multiple line items for same item from different different purchase requisition into a single line item in Purchase Order ?
    For example, say department A and B made two different purchase requisition for 1 number of computer system. Now the purchaser viewed these requisitions and he want to make a purchase order to party X for 2 no of computer system. Now how he can do this in Oracle Purchasing.
    Edited by: Saroj.Dash on May 31, 2010 6:02 AM

    Hi !
    thanx to all for your responses.
    But, let me explain better.
    Say Dept A raises an Requisition (Req No: 1 ) for 5 Chairs. In the same time Dept. B raises requisition (req no: 2 ) for 10 chairs.
    Now Purchase Dept. wants to make an PO to procure chair with respective to these 2 requisitions i.e. req no 1 from dept A and req no 2 from Dept B.
    Now my query is that, can the purchase dept. prepare a PO with 1 line item only i.e. for chair (5+10) of 15 numbers from these requisitions of dept A and B ?
    If yes then how ?

  • SO Multiple Line Items but one line item in billing

    Hi Experts,
    I have a requirement from a client whereby they want to consolidate the items in the sales order and create billing as one line item.
    Example: in sales order there are 5 line items (user need to have separate line items due to PR need to be generated for different vendors via 3rd party).
    Line item 10: Miscellaneous charges - $20.00
    Line item 20: Miscellaneous charges - $20.00
    Line item 30: Miscellaneous charges - $20.00
    Line item 40: Miscellaneous charges - $20.00
    Line item 50: Miscellaneous charges - $20.00
    In standard SAP, when the user generates billing document - the billing will show 5 line items. However user wants to consolidate them into 1 single line item  i.e. Miscellaneous charges - $100.00
    Please advice how can this be done.

    Go to Tcode : VTFL.
    There select your  Billing Type with respect to Delivery type. e.g F1 --- LF or F2 -
    Select thet option and goto Items.
    There at item level , select the item category of your materials. There In Details :
    Maintain Billing Quantity : H as Cumulity Batch Quantity.
    Let me know weather is has solved ur problem or not.

  • Authorization: data level security by cost center to finance line items

    We have a business unit request requiring implementation of cost center data level security through FI transaction codes for financial line items.  Example requirement:  Cost center manager can execute FS10N GL account line item display, drill into the balance and only return those line items to which the cost center manager has access.   Cost center managers currently report their cost center expenses via cost center accounting report and through those reports are able to drill into the FI line items to display document and line item details.  Cost Center managers, due to their varied responsibilities, also have access to tcode FS10N, from which if they execute reports directly, can access data for cost centers which they are not responsible for.
    Our security team has stated that the determination of authorization objects which are checked at transaction code/program execution are not configurable.  We’ve found when debugging that it would be possible to implement user exits for additional authorization checks, but that in order for the authorization check to actually get called, the object must be set as ‘checked’ within SU22/SU24.
    Has anyone had a request to implement such cost center data level security for financial line items through Financial transaction codes?  If so, what steps were taken to be implemented?   Was this able to be accomplished via security configuration and PFCG security role updates or was custom code logic needed?  If custom  logic was needed, to what extent was this implemented (what tcodes/programs were included; how was the decision of what to include and exclude determined).   What was the duration of this effort?
    Has anyone had a request to implement such cost center data level security request for financial line items via Financial transaction codes and not implemented the request?  How was this communicated to the business that the request for data level security goes against SAP’s authorization design?
    Thank you in advance for your input,
    Becky Zick

    Hi Becky
    Have you tried with object K_REPO_CCA? You have available these fields to filter authorizations.
    I hope this helps you

  • No duplication of line items in  Invoice

    After combining 2 or more deliveries if these deliveries contains the same line items,if i make one invoice out of these then my requirment will be
    same line items shd not be appear againg and again in the invoice instead quanties for the same line items shd be added up and shown as one line item only.
    Is there any provision for this in standard SAP? if so
    pls share with me ASAP
    Thanks in advance.

    As per my knowledge, It is not possible to configure as the requirement calls for. However, you may have to check whether it is possible through Abap Development.
    Possible Implication:
    If the Price of Same material is different in different order, then how the system should perform. The option would be to carry out new pricing, so that the price is common.
    Rajesh Banka
    Reward suitable points.

Maybe you are looking for