Adding colour and graphics to a j2me form

hi guys im trying to find info abt adding colour and graphics to a j2me form if anyone can help with any suggested links or info that would be great help thanks .

[http://developers.sun.com/mobility/apis/articles/3dgraphics/]

Similar Messages

Adding filename and path to Adobe Designer form footer

We are developing a form and Document Control required the form have a field on the form footer to show the live "Path & filename".
I need what is shown in the properties under "File" to show up in the footer. I have been unable to locate the correct syntax to type in the footer.
Can you tell me how this can be accomplished?

Create a field on your masterpage. Get rid of the caption, appearance=none and set as Protected. Also set your width to expand to fit. In the layout:ready event of your field, add this JavaScript:
this.rawValue=event.target.path
That should do it.
Kyle

Adobe InDesign, Text Colour and Graphic Overlay

Greetings everyone!
I am using Adobe InDesign to construct a portfolio and I am having a few small issues with my cover of the portfolio. I have integrated several graphics that are JPEG images into the cover and I added some transparency onto them. I am not sure how I can make it so that the text box is over the graphic. I am unable to press the text frame and instead, it seems like the frame for the graphic only ever appears as seen here in the top portion of my cover.
I am not sure how I can get the text frames to show here. What is weird is that I can physically put the text over the graphic by moving the graphic but still the text frames do not appear. This is related, I think, to my other issue in that the graphics appear to change the colour of my text somewhat when the text frame intersects the graphic. It is not very noticeable but you can see it better in the photo below. Above, what is really strange is how my name is black (Michal Laszczuk) while the word portfolio is grey(affected by the white background?) though it should be the same colour since the white background intersects both words. If I am working from the premise regarding the colour alteration due to the graphic, then the colour should be faded for both "Michal Laszczuk" and "Portfolio". Does anyone know what is up here?
On a side note, Im not sure why the graphics appear pixelated when not viewed in overprint preview.
As seen above, I am assuming that the text gets faded since the background colour of the graphic is white as seen below.
Does anyone know a way to eliminate this fading effect? I thought that if I put the text over the graphic, the colour of the text would not be impacted.This is clearly not the case as seen below. It seems like the darker elements of the graphic make the text darker while the white background fades the text.
It is a subtle difference but it is noticeable when you look at the screen long enough. Does this have to do with the transparency effect that I introduced to the graphic or is it the nature of the jpeg graphic? It seems like the white background and colour of the graphic affect the text. Is there an easy way to make it so that the text is not affected? I would be happy to clarify anything or give more detail if this situation appears too confusing.
Cheers!

I don't 'hope' for anything...the OP doesn't seem to understand 'frames'--am just trying to walk someone thru the process of moving text to another layer.
It also appears that a common mistake was made that allowed transparency settings to be applied to all elements.
my explanation/solution will get the OP partially where they need to be and they might realize the error that was made and actually learn how to use the program

How do I create a text style in CC libraries? Every time I drag and drop text into library form Photoshop or illustrator it turns it into a graphic.

How do I create a text style in CC libraries? Every time I drag and drop text into library form Photoshop or illustrator it turns it into a graphic.
If I select the text layer and click the text style button in the library it just creates a new text style for Myriad Pro 12pt - I'm not using that anywhere in my document.
Can anyone help? Seems like a bug to me as I'm trying what the video tutorials are saying.
Thanks

I realize AI is an illustration program.
Do you realize it is an object-based vector-based program? Do you know the difference between raster-based and vector-based content?
My question seems to be all over the forum but no one has been able to answer other than exporting to these file formats, which make text look awful and of no use....
And yet everyone else in the world makes proper web images every day using a plethora of programs, including these...go figure.
Am I missing something?
Yep. Pretty much.
Hello Adobe! People use transparency on website logos.
Hello, cocteau! What you're calling "transparency" is inherent to object-based vector artwork. But web browsers don't support object-based vector artwork, except via file formats like Flash and SVG, or by viewing as a PDF in a plug-in version of Reader. Raster imaging in general only supports "transparency" by either indexing a specific color (i.e.; "don't display this color", as in GIF) or including an alpha channel (i.e.; "blend all the pixels with existing pixels, based on values from this extra channel", as in PNG). It's all in the raster file format you use, cocteau; it has little-to-nothing to do specifically with Adobe software. Such things are among the most basic matters understood by someone doing web design.
When I export an eps from .ai file, and open the eps in photoshop,...I save as a gif for the web, it goes back to the original problem...creates jagged text. I"m giving up on this garbage...Thanks a lot adobe! Lower the price of this software if this is all that can be done.
Once it leaves Photoshop (or Illustrator, or whatever) as a non-proprietary raster image format, it's all about what the format can do re "transparency". You can do this stuff with most any graphics program. You should read about basic web design and the differences between raster and vector content, rather than rant.
JET

Graphics card needed to replace GeForce6800 Ultra on a G5 2.5Gz dual core mac, I always found it loud before it started displaying very basic colours and blocky graphics, could you suggest a quiet and cheap alternative compatible replacement card?

Graphics card needed to replace GeForce6800 Ultra on a G5 2.5Gz dual core mac, I always found it loud before it started displaying very basic colours and blocky graphics, could you suggest a quiet and cheap alternative compatible replacement card?

Hi Pete,
See japamacs page here on the best AGP cards for G4s & G5s...
http://www.jcsenterprises.com/Japamacs_Page/Blog/4B4B7BA2-7ABB-47F1-87AC-B03D379 42BEE.html
Rated slowest on top, fastest on bottom.
G5 PCIe options are listed here:
http://www.jcsenterprises.com/Japamacs_Page/Blog/71BBF3EF-9713-4C53-8B80-26771F8 A4087.html

Updating a Documentum virtual document with insets and graphics

(In which forum does this question belong?)
(FM11 with the EMC Documentum connector.)
I understand that the EMC Documentum connector to FM11 creates the "virtual document" resource in Documentum from a FM book and its dependent files. The creation of the virtual document happens when the book is first uploaded from FM11 through the CMS interface to Documentum.
That works for me.
How do I add referenced graphics to, or remove referenced graphics from, a chapter of the book so that the virtual document resource is automatically updated during check-in, check-out, or when I click on a control (that I don't see in the interface) ?
Will a workflow cause the EMC Documentum interface do that?
Or do I need to perform all additions to and deletions from the virtual document through, as an example, the Webtop interface?
Backstory
From work of a colleague last year, I inherited a book with referenced graphics.
The book and all of its chapter files reside in Documentum. A Documentum "virtual document" resources enables me to check out the book so that it and all dependent files become available.
The structure in the Documentum tree, and on the workstation Documentum cache, is similar to this:
_Book at top level
_Graphics folder at top level
_Chapter_1
_Chapter_2
I have successfully:
Created a graphic file and stored it in _Graphics on my workstation desktop (not the cache)
Uploaded the graphic to the _Graphics folder in Documentum through the Repository Manager.
In a _Chapter_# file, added the graphic to the chapter by reference. Using the Repository Mananger, I selected the graphic file from Step 2. The "progress bar" in FM indicated that FM was downloading the graphic file to the cache.
Saved the chapter file.
Checked in the book through Repository Manager. All of the chapter files and graphics checked in as expected.
Checked out the book through Repository Manager.
Opened the _Chapter_# file from step 3.
FM asks me to identify the location of the new graphic file.
I check the Repository Manager. The new graphic file is not checked out, no apparently it is not part of the book virtual document resource.

Hi cammic3319
Yes you can change the word document, then make a new PDF then replace the form with the fields with the new PDF.
If you are careful and do not change the position of the fields then it will fit right in.
If you change or add fields then with Acrobat you will have to rearrange the fields to match.
Ron A

Questions on Report Builder and Graphics Builder

Hi there:
I'm currently using Report/Graphics builder V 6.0.8.11.3 NT version to create RDF and OGD files.
I was wondering with the following confusions:
1) Is the RDF/OGD file that I create under NT plat form portable to Sun Unix?? (ie. would Report Server for Sun understand this NT RDF/OGD file?)
2) Is/will there a Sun solaris version of Report/Graphic Builder?? And would RDF/OGD file be compatible for both NT and Sun plat form??
Thank you very much.
Mark

The answer to both your questions is yes. the rdf and ogd are portable to the solaris version of reports and graphics which you can download from http://technet.oracle.com/products/reports/ on the software tab.

Adding data to multiple tables using one form in Access 2010?

Hi All,
I have a access database with two tables and I want to create a single form to enter data into that tables.
How to adding data to multiple tables using one form in Access 2010?
I don't have to much knowledge of access database?
Please help me
Thanks
Balaji

You really don't enter identical data into 2 tables. You enter dat into one single table, and then you have an unique identifier that maps to another table (you have a unique relationship between two tables).
Maybe you need to read this.
http://office.microsoft.com/en-001/access-help/database-design-basics-HA001224247.aspx
Think about it this way... What is you update data in 2 tables, and then the data in one of those tables changes, but the data in the other table does NOT change. WHOOPS!! Now, you've got a BIG problem. For instance, you have a customer
named Bill Gates. In one Table you update Bill's address to 1835 73rd Ave NE, Medina, WA 98039 and in the other table you accidentally update Bill's address to 183 73rd Ave NE, Medina, WA 98039. Now you have 2 addresses for Bill. Why would
you want that??? Which is right? No one knows. If you have one address, you just have to update one address and if there is a mistake, you just have to update one address, but you don't have to waste time trying to figure out which is right
and which is wong...and then update the one that is wrong.
Post back with specific questions.
Knowledge is the only thing that I can give you, and still retain, and we are both better off for it.

Same here, 4s working perfectly, downloaded update 8.0.1 Now no wifi or bluetooth or hotspot. Control on/off icons are muted in colour and don't respond. Tried resetting network connections then total restore, didn't work so still have the same probl

Same here, 4s working perfectly, downloaded update 8.0.1 Now no wifi or bluetooth or hotspot. Control on/off icons are muted in colour and don't respond. Tried resetting network connections then total restore, didn't work so still have the same problems as before.

Satellite L505D-S5983
I would try another restore of the hard disk to its original out-of-the-box contents using Toshiba recovery media. Maybe something went wrong in the process. Make sure everything works before applying any updates and adding any hardware or software.
Then add things carefully, rebooting Windows and testing the USB and audio at each step.
Please note this.
The only info windows gives me for the sound card is that it from Microsoft... with a driver version of 6.1.7601.17514....which naturally doesn't really help me since I have no idea what card or mobo I have . Is there any way for me to find out what I need other than opening up my laptop?
Every one of them lists my mobo simply as a Toshiba motherboard, with no audio card information. Which I'm assuming that is because it has an internal sound processor. My problem is that none of the properties, or ANYTHING I try, will give me information on what I need to fix this...
All of the latest drivers for your model are easily found here. This one is for the sound.
Realtek Audio Driver for Windows 7 (32/64)
-Jerry

Want to add Video and Graphic Card to my computer system

I Notice that one of the users' in the Apple discussion Board is Listed, (AndyO) he has help me many times in the Past and was succesful in my problrm solution, would he might be able to help me with this?
I had Purchased the Game Spore Creature Creator the Starter Kit which is just the Creature creator game and not the actual game itself. I wasn't able to install the the game on my computer because I don't have the right or not at all Video and Graphic Card install on my computer. I had Contacted the Company "EA" that puts out the Game Spore, this is what they said what the game requirements are: The minimum system requirements for Spore and Spore the Galactic Edition for Mac are as follows:
* Mac OS X 10.5.3 Leopard or higher
* Intel Core Duo Processor
* 1024 MB RAM
* At least 345 MB of hard drive space for installation, plus additional space for created creatures. (260 MB for the Trial Edition)
* Video Card - ATI X1600 or NVidia 7300 GT with 128 MB of Video RAM, or Intel Integrated GMA X3100
This game will not run on PowerPC (G3/G4/G5) based Mac systems (PowerMac).
For computers using built-in graphics chipsets, the game requires at least: an Intel Integrated Chipset GMA X3100 or Dual 2.0GHz CPUs, or 1.7GHz Core 2 Duo, or equivalent
Supported Video Cards
ATI Radeon(TM) series
* X1600, X1900, HD 2400, HD 2600
NVIDIA GeForce series
* 7300, 7600, 8600, 8800
Intel(R) Extreme Graphics
* GMA X3100
and that I need to upgrade my system. Basically I need; ATI Radeon 1600 or NVIDIA Geforce 7300 and a INTEL Extreme Graphic Video Card-GMA X3100, in order to be able to install and play this game. Since I already have this game, I would like to be able to upgrade my computer system which brings me to ask; does somone know or refer me to a web site that has and sells these Video and Graphic Card and supports for the Mini Mac?
Plus they say that I need a 1020 of MB of Ram, I Have already found that 1024 MB of Ram but I just need those Video and Graphic Cards for my computer system. I am adding my computer system Profile to my discussion board to show you what I have on my system, would you be able to tell me if I would be able to add these Video and Graphic card and the memory or Ram 1024 to my computer system?
Note: Here is a web site that I am looking at to add the 1024 MB of Ram to my computer system:
http://www.tigerdirect.com/applications/SearchTools/item-details.asp?EdpNo=24188 41&CatId=2453
what do you think?
Here is part a copy info of my computer system Profile:
Trisha Foster’s Mac mini
10/10/08 5:39 PM
Hardware:
Hardware Overview:
Model Name: Mac mini
Model Identifier: Macmini2,1
Processor Name: Intel Core 2 Duo
Processor Speed: 2 GHz
Number Of Processors: 1
Total Number Of Cores: 2
L2 Cache: 4 MB
Memory: 1 GB
Bus Speed: 667 MHz
Boot ROM Version: MM21.009A.B00
SMC Version: 1.19f2
Serial Number: YM8073Q**
Network:
AirPort:
Type: AirPort
Hardware: AirPort
BSD Device Name: en1
IPv4 Addresses: 169.254.247.182
IPv4:
Addresses: 169.254.247.182
Configuration Method: DHCP
Interface Name: en1
Subnet Masks: 255.255.0.0
IPv6:
Configuration Method: Automatic
Proxies:
Exceptions List: *.local, 169.254/16
FTP Passive Mode: Yes
Ethernet:
MAC Address: 00:1f:5b:3e:ce:93
Media Options:
Media Subtype: Auto Select
Bluetooth:
Type: PPP (PPPSerial)
Hardware: Modem
BSD Device Name: Bluetooth-Modem
IPv4:
Configuration Method: PPP
IPv6:
Configuration Method: Automatic
Proxies:
FTP Passive Mode: Yes
Ethernet:
Type: Ethernet
Hardware: Ethernet
BSD Device Name: en0
IPv4 Addresses: 192.168.1.102
IPv4:
Addresses: 192.168.1.102
Configuration Method: DHCP
Interface Name: en0
NetworkSignature: IPv4.Router=192.168.1.1;IPv4.RouterHardwareAddress=00:21:29:c3:12:ae
Router: 192.168.1.1
Subnet Masks: 255.255.255.0
IPv6:
Configuration Method: Automatic
DNS:
Domain Name: cruzio.com
Server Addresses: 74.220.64.45, 74.220.64.55
DHCP Server Responses:
Domain Name: cruzio.com
Domain Name Servers: 74.220.64.45,74.220.64.55
Lease Duration (seconds): 0
DHCP Message Type: 0x05
Routers: 192.168.1.1
Server Identifier: 192.168.1.1
Subnet Mask: 255.255.255.0
Proxies:
Exceptions List: *.local, 169.254/16
FTP Passive Mode: Yes
Ethernet:
MAC Address: 00:16:cb:af:11:7f
Media Options: Full Duplex, flow-control
Media Subtype: 100baseTX
FireWire:
Type: FireWire
Hardware: FireWire
BSD Device Name: fw0
IPv4:
Configuration Method: DHCP
IPv6:
Configuration Method: Automatic
Proxies:
Exceptions List: *.local, 169.254/16
FTP Passive Mode: Yes
Ethernet:
MAC Address: 00:1f:5b:ff:fe:17:17:2a
Media Options: Full Duplex
Media Subtype: Auto Select
Software:
System Software Overview:
System Version: Mac OS X 10.5.5 (9F33)
Kernel Version: Darwin 9.5.0
Boot Volume: Macintosh HD
Boot Mode: Normal
Computer Name: Trisha Foster’s Mac mini
User Name: Trisha Foster (tiger)
Time since boot: 59 minutes
ATA:
ATA Bus:
PIONEER DVD-RW DVR-K06:
Capacity: 423.4 MB
Model: PIONEER DVD-RW DVR-K06
Revision: Q614
Removable Media: Yes
Detachable Drive: No
BSD Name: disk2
Protocol: ATAPI
Unit Number: 0
Socket Type: Internal
Low Power Polling: Yes
Mac OS 9 Drivers: No
Partition Map Type: Unknown
S.M.A.R.T. status: Not Supported
Volumes:
SPORE:
Capacity: 368.7 MB
Media Type: CD-ROM
Writable: No
File System: ISO Rockridge
BSD Name: disk2s0
Mount Point: /Volumes/SPORE
Audio (Built In):
Intel High Definition Audio:
Device ID: 0x83847680
Audio ID: 8
Available Devices:
Headphone:
Connection: Combo
Speaker:
Connection: Internal
Line In:
Connection: Combo
S/P-DIF Out:
Connection: Combo
S/P-DIF In:
Connection: Combo
Bluetooth:
Apple Bluetooth Software Version: 2.1.0f17
Hardware Settings:
Trisha Foster’s Mac mini:
Address: 00-1f-5b-72-12-aa
Manufacturer: Cambridge Silicon Radio
Firmware Version: 3.1965 (3.1965)
Bluetooth Power: On
Discoverable: Yes
HCI Version: 3 ($3)
HCI Revision: 1965 ($7ad)
LMP Version: 3 ($3)
LMP Subversion: 1965 ($7ad)
Device Type (Major): Computer
Device Type (Complete): Macintosh Desktop
Composite Class Of Device: 3154180 ($302104)
Device Class (Major): 1 ($1)
Device Class (Minor): 1 ($1)
Service Class: 385 ($181)
Requires Authentication: No
Services:
Bluetooth File Transfer:
Folder other devices can browse: ~/Public
Requires Authentication: Yes
State: Enabled
Bluetooth File Exchange:
Folder for accepted items: ~/Downloads
Requires Authentication: No
When other items are accepted: Ask
When PIM items are accepted: Ask
When receiving items: Prompt for each file
State: Enabled
Incoming Serial Ports:
Serial Port 1:
Name: Bluetooth-PDA-Sync
RFCOMM Channel: 3
Requires Authentication: No
Outgoing Serial Ports:
Serial Port 1:
Address:
Name: Bluetooth-Modem
RFCOMM Channel: 0
Requires Authentication: No
Diagnostics:
Power On Self-Test:
Last Run: 10/10/08 4:41 PM
Result: Passed
Disc Burning:
TEAC CD-W540E:
Firmware Revision: 1.0F
Interconnect: FireWire
Burn Support: Yes (Apple Supported Drive)
Cache: 8192 KB
Reads DVD: No
CD-Write: -R, -RW
Write Strategies: CD-TAO, CD-SAO, CD-Raw
Media: Insert media and refresh to show available burn speeds
PIONEER DVD-RW DVR-K06:
Firmware Revision: Q614
Interconnect: ATAPI
Burn Support: Yes (Apple Shipping Drive)
Cache: 2000 KB
Reads DVD: Yes
CD-Write: -R, -RW
DVD-Write: -R, -R DL, -RW, +R, +R DL, +RW
Write Strategies: CD-TAO, CD-SAO, CD-Raw, DVD-DAO
Media:
Type: CD-ROM
Blank: No
Erasable: No
Overwritable: No
Appendable: No
FireWire:
FireWire Bus:
Maximum Speed: Up to 400 Mb/sec
OXFORD IDE Device LUN 0:
Manufacturer: Oxford Semiconductor Ltd.
Model: 0x42A258
GUID: 0x1D200500648AF
Maximum Speed: Up to 400 Mb/sec
Connection Speed: Up to 400 Mb/sec
Sub-units:
OXFORD IDE Device LUN 0 Unit:
Unit Software Version: 0x10483
Unit Spec ID: 0x609E
Firmware Revision: 0x444133
Product Revision Level: 1.0F
Sub-units:
OXFORD IDE Device LUN 0 SBP-LUN:
Graphics/Displays:
Intel GMA 950:
Chipset Model: GMA 950
Type: Display
Bus: Built-In
VRAM (Total): 64 MB of shared system memory
Vendor: Intel (0x8086)
Device ID: 0x27a2
Revision ID: 0x0003
Displays:
L1916HW:
Resolution: 1280 x 800 @ 60 Hz
Depth: 32-bit Color
Core Image: Hardware Accelerated
Main Display: Yes
Mirror: Off
Online: Yes
Quartz Extreme: Supported
Rotation: Supported
Memory:
BANK 0/DIMM0:
Size: 512 MB
Type: DDR2 SDRAM
Speed: 667 MHz
Status: OK
Manufacturer: 0xAD00000000000000
Part Number: 0x48594D503536345336344350362D59352020
Serial Number: 0x0000**
BANK 1/DIMM1:
Size: 512 MB
Type: DDR2 SDRAM
Speed: 667 MHz
Status: OK
Manufacturer: 0xAD00000000000000
Part Number: 0x48594D503536345336344350362D59352020
Serial Number: 0x00001*
Power:
System Power Settings:
AC Power:
System Sleep Timer (Minutes): 10
Disk Sleep Timer (Minutes): 10
Display Sleep Timer (Minutes): 10
Sleep On Power Button: Yes
Automatic Restart On Power Loss: No
Wake On LAN: Yes
Hardware Configuration:
UPS Installed: No
Printers:
Canon MP830:
Status: Idle
Print Server: Local
Driver Version: 4.8.3
Default: Yes
URI: usb://Canon/MP830?serial=19702D
PPD: Canon MP830
PPD File Version: 1.0
PostScript Version: (3011.104) 0
Serial-ATA:
Intel ICH7-M AHCI:
Vendor: Intel
Product: ICH7-M AHCI
Speed: 1.5 Gigabit
Description: AHCI Version 1.10 Supported
Hitachi HTS541612J9SA00:
Capacity: 111.79 GB
Model: Hitachi HTS541612J9SA00
Revision: SBDAC7MP
Serial Number: SB2EF9L7G3**
Native Command Queuing: Yes
Queue Depth: 32
Removable Media: No
Detachable Drive: No
BSD Name: disk0
Mac OS 9 Drivers: No
Partition Map Type: GPT (GUID Partition Table)
S.M.A.R.T. status: Verified
Volumes:
Macintosh HD:
Capacity: 111.47 GB
Available: 63.14 GB
Writable: Yes
File System: Journaled HFS+
BSD Name: disk0s2
Mount Point: /
USB:
USB High-Speed Bus:
Host Controller Location: Built In USB
Host Controller Driver: AppleUSBEHCI
PCI Device ID: 0x27cc
PCI Revision ID: 0x0002
PCI Vendor ID: 0x8086
Bus Number: 0xfd
Keyboard Hub:
Version: 94.15
Bus Power (mA): 500
Speed: Up to 480 Mb/sec
Manufacturer: Apple, Inc.
Product ID: 0x1006
Serial Number: 000000000000
Vendor ID: 0x05ac (Apple Computer, Inc.)
USB RECEIVER:
Version: 25.10
Bus Power (mA): 100
Speed: Up to 1.5 Mb/sec
Manufacturer: Logitech
Product ID: 0xc50e
Vendor ID: 0x046d
Apple Keyboard:
Version: 0.69
Bus Power (mA): 100
Speed: Up to 1.5 Mb/sec
Manufacturer: Apple, Inc
Product ID: 0x0220
Vendor ID: 0x05ac (Apple Computer, Inc.)
iPod:
Version: 0.01
Bus Power (mA): 500
Speed: Up to 480 Mb/sec
Manufacturer: Apple Inc.
Product ID: 0x1291
Serial Number: aa1186ca1738fd28eef1eeb1b22754********
Vendor ID: 0x05ac (Apple Computer, Inc.)
USB2.0 Hub:
Version: 7.02
Bus Power (mA): 500
Speed: Up to 480 Mb/sec
Product ID: 0x0606
Vendor ID: 0x05e3
USB 2.0 3.5" DEVICE:
Capacity: 153.39 GB
Removable Media: Yes
Detachable Drive: Yes
BSD Name: disk1
Version: 0.01
Bus Power (mA): 500
Speed: Up to 480 Mb/sec
Manufacturer: Macpower Technology Co.LTD.
Mac OS 9 Drivers: Yes
Partition Map Type: APM (Apple Partition Map)
Product ID: 0x0073
Serial Number: BC0*
S.M.A.R.T. status: Not Supported
Vendor ID: 0x0dc4
Volumes:
miniStack:
Capacity: 153.26 GB
Available: 42.96 GB
Writable: Yes
File System: Journaled HFS+
BSD Name: disk1s10
Mount Point: /Volumes/miniStack
MP830:
Version: 1.15
Bus Power (mA): 500
Speed: Up to 480 Mb/sec
Manufacturer: Canon
Product ID: 0x1713
Serial Number: 197*
Vendor ID: 0x04a9
USB Bus:
Host Controller Location: Built In USB
Host Controller Driver: AppleUSBUHCI
PCI Device ID: 0x27c8
PCI Revision ID: 0x0002
PCI Vendor ID: 0x8086
Bus Number: 0x1d
USB Bus:
Host Controller Location: Built In USB
Host Controller Driver: AppleUSBUHCI
PCI Device ID: 0x27c9
PCI Revision ID: 0x0002
PCI Vendor ID: 0x8086
Bus Number: 0x3d
USB Bus:
Host Controller Location: Built In USB
Host Controller Driver: AppleUSBUHCI
PCI Device ID: 0x27ca
PCI Revision ID: 0x0002
PCI Vendor ID: 0x8086
Bus Number: 0x5d
USB Bus:
Host Controller Location: Built In USB
Host Controller Driver: AppleUSBUHCI
PCI Device ID: 0x27cb
PCI Revision ID: 0x0002
PCI Vendor ID: 0x8086
Bus Number: 0x7d
Bluetooth USB Host Controller:
Version: 19.65
Bus Power (mA): 500
Speed: Up to 12 Mb/sec
Manufacturer: Apple, Inc.
Product ID: 0x8205
Vendor ID: 0x05ac (Apple Computer, Inc.)
IR Receiver:
Version: 1.10
Bus Power (mA): 500
Speed: Up to 12 Mb/sec
Manufacturer: Apple Computer, Inc.
Product ID: 0x8240
Vendor ID: 0x05ac (Apple Computer, Inc.)
AirPort Card:
AirPort Card Information:
Wireless Card Type: AirPort Extreme (0x168C, 0x86)
Wireless Card Locale: USA
Wireless Card Firmware Version: 1.4.4
Current Wireless Network: Trisha's iPod
Wireless Channel: 11
Firewall:
Firewall Settings:
Mode: Allow all incoming connections
Locations:
Automatic:
Active Location: Yes
Services:
AirPort:
Type: IEEE80211
BSD Device Name: en1
Hardware (MAC) Address: 00:1f:5b:3e:ce:93
IPv4:
Configuration Method: DHCP
IPv6:
Configuration Method: Automatic
AppleTalk:
Configuration Method: Node
Proxies:
Exceptions List: *.local, 169.254/16
FTP Passive Mode: Yes
IEEE80211:
Join Mode: Automatic
JoinModeFallback: Prompt
PowerEnabled: 1
PreferredNetworks:
SecurityType: Open
SSID_STR: Apple Store
Unique Network ID: 4BCBEE2D-83B9-4CC1-B110-8D0E8E5DF49C
SecurityType: Open
SSID_STR: linksys
Unique Network ID: F2551FD6-95A7-4F98-9F7F-758A89DBD931
Bluetooth:
Type: PPP
IPv4:
Configuration Method: PPP
IPv6:
Configuration Method: Automatic
Proxies:
FTP Passive Mode: Yes
PPP:
ACSP Enabled: No
Display Terminal Window: No
Redial Count: 1
Redial Enabled: Yes
Redial Interval: 5
Use Terminal Script: No
Dial On Demand: No
Disconnect On Fast User Switch: Yes
Disconnect On Idle: Yes
Disconnect On Idle Time: 600
Disconnect On Logout: Yes
Disconnect On Sleep: Yes
Idle Reminder: No
Idle Reminder Time: 1800
IPCP Compression VJ: Yes
LCP Echo Enabled: No
LCP Echo Failure: 4
LCP Echo Interval: 10
Log File: /var/log/ppp.log
Verbose Logging: No
Ethernet:
Type: Ethernet
BSD Device Name: en0
Hardware (MAC) Address: 00:16:cb:af:11:7f
IPv4:
Configuration Method: DHCP
IPv6:
Configuration Method: Automatic
AppleTalk:
Configuration Method: Node
Proxies:
Exceptions List: *.local, 169.254/16
FTP Passive Mode: Yes
FireWire:
Type: FireWire
BSD Device Name: fw0
Hardware (MAC) Address: 00:1f:5b:ff:fe:17:17:2a
IPv4:
Configuration Method: DHCP
IPv6:
Configuration Method: Automatic
Proxies:
Exceptions List: *.local, 169.254/16
Can someone Please help me with any suggestions or otherwisde I will have to go to a Apple store and ask for help there.
Thank You,
Trisha Foster
<Edited by Moderator>

Hi Trisha,
The only modern Mac's with video cards are the Mac Pro and Xserve (server) systems. They both are priced quite a bit higher than any Mac Mini.
Some systems, like the Mac Book Pro laptop can be ordered with different graphics cards, but that has be done when the system is built, as it is not replaceable once the system is built. To find out which systems, go to store.apple.com. For each system that you select, you can see if there's an option for a better video card.
David

Acrobat 9 Pro: Extended features in Abobe Reader and users can't resave form

Hi all,
I recently purchased Adobe Acrobat Pro 9 in order to be able to convert existing Word docs into "type-able" PDF forms. After sending one of the forms to a coworker, we discovered a big issue. She was able to input data and save the form - once. She is unable to edit any of the data she saved or add to any of the fields she didn't fill out. (FYI, she is using Adobe Reader 8)
When I view the security settings for the form Adobe Acrobat Pro 9 it states "filling of form fields - allowed". When you initially open the form in Reader it states the same. If you input data and save the form, and then reopen it, a popup message appears:
This document contained certain rights to enable special features in Adobe Reader. The document has been changed since it was created and these rights are no longer valid. Please contact the author for the original version of this document.
Additionally, the security now states "filling of form fields - NOT allowed". Users completing these forms won't always have all of the data they need at their disposal, so the form is quite simply useless if you can only enter and save it once. We can't even save it with a different file name.
Is there anything I can do so that users who are viewing / adding to the forms I create can go back to edit form fields after they've saved the form?
Thank you,
Colleen Caldwell

Same thing happened to me.
A form that used to work fine, wont let me input any data anymore.
I just received the following message:
"This document contained certain rights to enable special features in Adobe Reader. The document has been changed since it was created and these rights are no longer valid. Please contact the author for the original version of this document."
I reinstall Adobe Acrobat Reader again, deleted temporary files, restart the computer and even downloaded again the form, which I saved with different name and continues saying same thing.
Any help would be greatly appreciated.
Thanks

Allow user to fill in a fillable pdf but disallow adding comments and annotation

Hi there. I have a fillable pdf created by livecycle designer. I want to let users fill in the form but prevant them adding comments and annotatons to the form. I cannot reset the above requirements in form property - form security if I have already set a password and allowed user to fill in the form. Can I user javascript to that effect during the document loading?
Thanks.

Hi,
If you save the form as a Dynamic XML Form in the save-as dialogue, then the user will not be able to apply comments. They can only do this in flat or static PDF forms.
See here: http://assure.ly/gYyYc2
Previous post exploring annotating forms:
Drawing field?
Hope that helps,
Niall

Reader X failing on Save and Save As, after the form has been opened for longer than an hour.

I'm wondering if anyone else has had this happen or maybe can offer a solution. I have several Dynamic XML forms designed in LiveCycle ES2 v9 that since our ministry switched to Reader X have been failing. At first, the save button greys out (even though new information has been inputed) and the form will only save as. Then the save as function will start to fail if the form is left open.
Our users are running Reader 10.1 on Windows Vista and so far its only users that have left it open longer than two hours, or over night. These forms have been Reader extended and at first save without issue.
Unfortunately, just telling the users not to leave it open isn't an option. We just need Reader X to work.
Thanks in advance for any information you can share about this.
~Connie

Hi Kyle,
Yes there is a lot of code within the forms. Mostly adding instances, and changing the presence on subforms. These particular forms do not have data connections, or execute any code from a server. The script all runs at the client level.
I'm checking with the form content owners to see if I'm allowed to post any of them. If they give the okay then I'll put a sample up here.
~Connie

Join 2 tables and display in Master Detail Form

Hello Everyone,
Please help me out on the following.
I have 2 tables with common field ID I want to join the 2 tables and will show the results on Master Detail form .Please suggest me on this thing .
Thanks

Hi,
The ID primary key on the details table should be ok provided you have some means of populating it - usually via a trigger that gets a new sequence number.
When the page is loaded, do you see data in the details tabular form? Or is the problem only for when you are creating entirely new master/detail records?
When adding a new record into the details form, the FK field should be populated with the PK of the master form by default. On this report, go to the Contract_Number column and have a look at the Column Attributes for it. You should see a section for Tabular Form Element and in there are two settings - Default Type and Default. The Default Type should be Item.... and the Default should be the master record's PK page item name (eg, P1_CONTRACT_NUMBER). Underneath these settings should be the settings Referrence.... - check that these correctly point to the field on the details table. If you have different settings, try changing them - otherwise, list them here so that we can check
Andy

Adding images and buttons without a frame appearing

I would like to add images to some of my pages without having them appear in a frame. I would like to place some transparent gifs on the page to use as buttons for hyperlinks. I would also like to have some photos (with transparent backgrounds that appear on the page and are not surrounded by a picture frame. Any Suggestions

iWeb seems to default to stroking newly-added images and shapes. Pages (iWeb's close relation) includes a way to change the default appearance, but I can't find anything similar in iWeb. You can, of course, remove the stroke using the Graphic Inspector (just set Stroke to None). Transparency in gifs and photo images is supported. Just drag into iWeb or use Insert > Choose... Again, remove the stroke if this appears.

Adding colour and graphics to a j2me form

Similar Messages

Maybe you are looking for