Adding componets to oracle home after patching

I installed 10.1.0.2 RDBMS enterprise edition and applied the 10.1.0.3 patch and the Jan05 critical update patch. When I wanted to use the dB created with this home as OEM Grid control repository, I found that it did not have LABEL Security. My questions
Is it possible to run the installer again from the 10.1.0.2 media and add LABEL security ?
If yes what is the impact on the 10.1.0.3 patch and the critical update patch ?

hello; I completed all installation process of Oracle
10.g. When I tried to go to Database home I could not
go. I can not connect. Please advise me. Did you install XE version?
Right now I install the Oracle 10g under Window 2000
and when I go to Database
home page it gave me this Win 2000?
Which Service Packs are already installed?
The page cannot be displayed
here is a problem with the page you are trying to
reach and it cannot be displayed. Firewall?
What can I do to fix this problem and it since this
is a common problem to most people?Search this Forum.
HTH

Similar Messages

How to uninstall the 8.0.6 Oracle Home after R12 upgrade

I would like to remove the 8.0.6 Oracle Home from the central inventory after completing an R12 upgrade. Using the 10.1.3 OUI, I am able to remove the 9iAS Oracle Home from the inventory, but the 8.0.6 Oracle Home does not have a checkbox that allows OUI to deinstall. I thought there was some 8.0.6 process that would do the inventory deregistration.

I found 8.0.6 $ORACLE_HOME/orainst. Using orainst, I could remove all software except the reports server, that throws the following error:
or60w.dei(0): FILE_NOT_FOUND while deinstalling │ │
│ │ or60w. (No such file or directory.)

10.2 Oracle Home after 11i 12 upgrade

We have done an upgrade of 11.5.9 to 12.0.6 on TEST. We did the DB upgrade separately (ie - not within the rapidinstall part). So, we have the original 10.2 oracle home from 11i, as well as the 10.2 oracle home that was supplied with rapidinstall. Herein lies the question:
1) Does it matter which Oracle Home is used (presuming both are at the same patchset level? Will their be future implications if the 11i 10.2 oracle home is used?
2) If we are using the 11i 10.2 Oracle Home, how does one move to the other Oracle Home (the one that the release 12 rapidinstall supplied) - is this part of running the appsutil.zip? Please bear with me on these questions - it's been a couple of months since we did this, and we're just reviewing everything again in further detail.
Thanks everyone.

Hi Hussein,
Perhaps I used the wrong words (my apologies).
1) We upgraded our 11.5.9CU2 9.2.0.8 DB to 10.2.0.4 first, before running rapidinstall (because this is how we plan to do it in PROD - this breaks up the downtimes to our users).
2) We did not install a 12i 10.2 oracle home per se - when we ran the rapid install, it supplied the filesystem: $ORACLE_BASE/db/tech_st/10.2.0/ - and this is what is a little confusing to me.
3) During the 11i>12 upgrade, under the "Oracle Applications Upgrade Guide: Release 11i to Release 12.0.4" - Page 3-8 - step 7 - we generated a new context file under the 11i 10.2 oracle home.
4) So, we clearly are using the 11i 10.2 Oracle Home. So my questions are:
Q1) The filesystem that rapidinstall supplied (as noted in point 2 above) - essentially that is not doing anything - ie - it is a duplication?
Q2) Under the "Oracle Applications Upgrade Guide: Release 11i to Release 12.0.4" - Page 3-2, Oracle says "We strongly recommend that you use the Release 12.0.4 Oracle Home supplied by Rapid Install..." - I guess this is the part that has me a bit confused, or I need a second opinion on. My assumption is that we are OK here in what we did - that being, using the 10.2.0.4 Oracle Home from 11i.
Thanks very much...Colin

Listener complications in second oracle homes after 11.2.0.3 upgrade

Hi Everyone,
I am running Oracle 11.2.0.1 64-bit on Windows Server 2008 R2, and Application Express 4.1.1.
I decided to upgrade to 11.2.0.3 for the security/general fixes. I installed 11.2.0.3 into a separate home directory (home2) and then upgraded the 11.2.0.1 database using the DBUA. The upgrade went fine, and the database/Apex started up without incident.
At this point, I had one listener running from home1 - I have multiple database links and TNS entries which ran perfectly in 11.2.0.1. I figured since the database was upgraded, I would create a new listener from home2, replicate the listener/TNS entries for the database links but point them to home2, and turn off the listener from home1. So I did this, ran the listener2 on the same port as home1 (obvisouly after the original listener was shut down), and things were working for the most part, except that the database link queries in the Apex application would fail intermittently. One time it would work, the next time it would say "TNS error: connect identifier could not be resolved". This never occurred in the original configuration.
After some fiddling around with various listener settings, I ended up running the listener from home2 with the exact same listener.ora, tnsnames.ora, and sqlnet.ora files from the home1 NETWORK\admin folder. So basically the listener2 service is running, but all listener entries are pointing to the home1 location.
I am confused on how this is working... first, why would the listener2 running from home2 have random problems with the database links, and why does the listener2 configuration work while pointing to home1?
Any info is appreciated.
-Ian

I figured since the database was upgraded, I would create a new listener from home2, replicate the listener/TNS entries for the database links but point them to >home2, and turn off the listener from home1.inplace of moving listener.ora file into new home,can you try to create new listener by using NETCA.

Re-config of ssh fails after changing Oracle Home while installing RAC

Hi,
Red Hat Linux 5
Oracle 10.2.0.1 RAC installation
While installing Oracle RAC under ORACLE user we are Configuring ssh for the first time works fine. If any changes done (Eg: i changed the home path of oracle user), then the ssh configuration will prompt for password no matter how many times you reconfigure the ssh.
I have created another OS user orclusr instead of oracle to over come this issue
Have any one came across this situation or finds a solution, please reply back.
Regards
hari
Edited by: hariharan.thyagarajan on Apr 8, 2010 12:33 PM

hariharan.thyagarajan wrote:
Hi,
One of the most important reasons for building Real Application Clusters is stability.
Changing the Oracle Home, after the cluster is built is about 180 degrees counter to this philosophy.
I agree with this but we face the error while installing oracle cluster
here is my scenario:
create oracle user on both the nodes(rac1,rac2):
1) my first oracle home - /home/oraclePart of thinking these things through before proceeding is to recognize that the concept of ORACLE_HOME is not the same as the $HOME directory for the OS user who happens to be named "oracle".
Since you appear to be still in the process of building this system, I'd suggest you go back to square one while you can.
2) configure ssh on both the nodes
3) due to sapce constraint in /home mount point we changed the oracle home to /oracle
4) so my new oracle home is /oracle
5) re-configuring of ssh is working fine, no error's
6) but if i issue the below command ssg date rac2 it prompts for password why ?
Any possibility to over come this issue ?
Regards
hari
Edited by: hariharan.thyagarajan on Apr 8, 2010 1:14 PM

Multiple oracle homes installation

i have installed oracle 9i database on single sever where 8i is residing using multiple oracle homes.After installation some folders and files related to 9i created in 8i home directory(eg:9i admin related folder create in 8i admin folder).but i dont want to create like that.is there any way to create all files related to 9i should reside on that 9i home directory only?

You didn't specified the OS.
Assume that your OS is Unix-like (Solaris, Linux) and your user is oracle.
The answer is very simple. Use different enviroments.
create in home directory (oracle user) two files:
1. .ora_8i
2. .ora_9i
All enviroment variables related for 8i database (ORACLE_BASE, ORACLE_HOME, ORACLE_SID, LD_LIBRARY_PATH etc.) are defined in .ora _8i and all variables for 9i are defined in .ora_9i.
Now, you want working with 8i so you need apply 8i enviroment. To do that simply execute following from shell ". ~/.ora_8i". Now you decided working with 9i so simply execute the ". ~/.ora_9i" from shell.
For installation use the same way. So before you run ./runInstaller load the apropriate enviroment.

Error while appying patch set 4 (10.1.3.4.0) to oracle home (10.1.3.1.0 )

Hi,
I am trying to apply patch set 10g Release 3 (10.1.3) Patch Set 4 (10.1.3.4.0) to 10g Release 3 (10.1.3.1.0) oracle home. As the pre - installation steps describes I have run the script ‘upgrade_10131_10134_oracle.sql’ for both ESB and BPEL. Also we need to delete the line <data id="java-bin" value="/myhost/jdk1.4.2/bin/java" />from the ‘ORACLE_HOME/opmn/conf/opmn.xml’ file. But when I have checked that file, the line was not present there.
But when I am running the installer, it is showing error like
Error
--> Process (index=1,uid=418288051,pid=30220)
failed to start a managed process after the maximum retry limit
Log:
C:\Oracle\Soa_OFMPractice\SOATESTING\opmn\logs\\HTTP_Server~1.log
Configuration assistant "OPMN Configuration Assistant" failed.
When I checked the log I got the error message like
08/12/05 14:00:10 Start process
Syntax error on line 278 of c:/oracle/soa_ofmpractice/soatesting/apache/apache/conf/httpd.conf:
Cannot load c:/oracle/soa_ofmpractice/soatesting/apache/apache/modules/apachemoduleossl.dll into server: (127) The specified procedure could not be found:
Does anybody know how to fix this problem?
Thanks & Regards,
Anju

There is a quick fix for this
There are 2 lines you need to comment form the c:/oracle/soa_ofmpractice/soatesting/apache/apache/conf/httpd.conf
A comment is done with a #
If you look in the C:\Oracle\Soa_OFMPractice\SOATESTING\opmn\logs\HTTP_Server~1.log file it will tell you.
Find the line that has apachemoduleossl in it. When you try and restart it will fail again the C:\Oracle\Soa_OFMPractice\SOATESTING\opmn\logs\HTTP_Server~1.log should tell you what line to comment
sorry can't be of much more help but dont have access to an environement at the moment.
cheers
James

Using patch plans for 12.1.0.2 target oracle home fails with 'PREREQ_MESG: Unable to get the version of OPatch'

We are attempting to use patch plan to apply PSU and one-offs to a new 12.1.0.2 database oracle home. Our EM version is 12.1.0.4.
We are experiencing the same issue described in ''Bug 20271609 : Unable to get the version of OPatch". This bug is closed as 'duplicate bug to filer' but we do not appear to have visibility into what patch/bug fixes the issue.
Description from the above mentioned bug is our same issue. We do not have this issue when we use patch plans against an 11.2.x oracle_home target. It is unique to 12.1.0.2 oracle_home target.
Description from the bug:
The Plan failed in step "Run Prerequisite Checks" with the following errors:
PREREQ_NAME: Minimum Version of OPatch
PREREQ_DESC: Check if the required version of OPatch is present on the target
PREREQ_TYPE: PATCH_TOOL_CHECK
PREREQ_STATUS: FAILED
PREREQ_MESG: Unable to get the version of OPatch at
/u01/app/oracle/product/12.1.0/dbhome_2/Opatch
We have opened an SR to see if we can get more info on what was already identified as a bug. Has anyone else experienced this issue? If so, can you share any patches or workarounds (other than manually applying patches) that you found useful?
Thanks.

You'll probably get the same info from Support, but the workaround is to use the Patch Database (however that doesn't work if there's no DB target associated to that home). If you were trying to do patchign out of place (clone home, patch, then move db's), EM can do this for you. If you're just installing a new DB Home and trying to patch, then i don' think there's another workaround. The base bug is marked fixed though, so a backport for the 12.1.0.6 plugin should be available very soon. I would ask the support analyst to request the backport for your plugin/patch level...

How to know the list of patches applied to iAS Oracle home and 8.0.6 Home

Hi,
Please help me for the steps to know the list of patches applied to iAS Oracle home
and 8.0.6 Home;
as we can use ad_bugs, ad_applied_patches, OAM Applied Patches for Oracle Applications Patches list
and we can use opatch lsinventory for Oracle Database patches applied list

Thanks for sharing the answer. BTW, there are some exceptions like, determining Developer 6i patchset applied, and Oracle 9iAS version:
How to find the developer version
Re: how to find the developer version
Note: 186981.1 - Oracle Application Server with Oracle E-Business Suite Release 11i FAQ
https://metalink.oracle.com/metalink/plsql/ml2_documents.showDocument?p_database_id=NOT&p_id=186981.1

URGENT HELP!!. Applying 8.1.7.4 patch in different Oracle Homes.

Hi all,
We are using 8.1.7.0 on SunSolaris OS(5). We've 4 oracle instances running on 817 and one on 8174. They are all in different oracle homes.
Oraclehome1 - 8170
Oraclehome2 - 8174
When I tried to put 8174 patch on Oraclehome1 the installation terminates without installing the software and its not giving any errors. In oracInventory logs it displays the following version numbers.
8.1.7.4 > 8.1.7.4
I also tried to reinstall full software on Oraclehome1. It is also failing with link errors.
How can I install 8174 patch in oraclehome1? OR how can upgrade the oracle instance under oraclehome1 to 8174?
Thanks for any inputs.
Regards

Yes I did shutdown the database and stopped all other services running on the machine.

Multiple Oracle Homes - Oracle Listener failes to start after installation

Just in case the listener fails to start after an oracle installation, please check the oracle ports in the listener.ora and tnsnames.ora, both of which are present in the following directory:
...\oracle\<SID>\<Ver>\NETWORK\ADMIN
All installations should have separate listener ports eg. If the first installation has port 1527, the next one should be 1528 and so on..
If they do not, manually change the ports and start the listeners.
Also check SAP Note 98252. Although I didn't find it necessary (I think it applies only if you have a single listener for all oracle homes), it did give me an idea that there some config problem in the .ora files.
Also see [this thread|Oracle Listener error in Import ABAP phase?; for related details

hi
thanks for the help ,
I have been using the SQL Server , i am totally blank about Oracle
i am totally confused with this user, and hoststring
i logged in to the enterprise manager using System and manager password
But i cannot connect to any database using SQL Server
i am not remembering any user name or password i have given during installation.
the only thing i remember is
Global databasename = (globedb) i have given
For SID = globedb the same name i have given
for sys ,i have given sysdb as password
and for system i have given systemdb as password
with this can i do anything
when expand the schemas ,i can see the XDB,SCOTT and SYS . how can i login to this .
if i want to login to the scott
what would be the username,password,and hoststring. since i haven't set any password and username ,there would be some default username ,password, and hoststring.
if any one can help me please help me
thanks regards

Performace problem in oracle DB after Solaris 10 recommended patching

Dear All,
We are facing some performance problems in our oracle DB qerries and reports recently. We applied Solaris 10 recommended patchset on april 24th. Our monthly report generation acitivity is now running for last 3 days i.e may 11,12,13 and application team is complaining of degraded performance. I can see that the cpu usage on the server is about 100% during the report generation , but everything else is fine. Free memory is 15gb , all mountpoints are under 80% and there is no other hardware issue as well.
Now app team is suspecting that last month patching could be the cause of the problem, because till last month they were performing this activity without having a performance degradtion.
I just need to be sure that solaris 10 recommended patches are not causing this issue. Any of you ever faced such an issue after patch installation ?
The server is V490 with 8 cpu / 32gb RAM. Any hints will be appreciated ?
Thanks in Advance.
Edited by: 1005720 on May 13, 2013 9:58 PM

I did not archive the o/p of prstat but have o/p of top with me
195 processes: 175 sleeping, 13 running, 1 zombie, 6 on cpu
CPU states: 0.0% idle, 78.4% user, 21.6% kernel, 0.0% iowait, 0.0% swap
Memory: 32G phys mem, 16G free mem, 70G total swap, 70G free swap
PID USERNAME LWP PRI NICE SIZE RES STATE TIME CPU COMMAND
18964 oracle 39 41 0 6389M 5488M cpu/1 2:50 15.04% oracle
19638 oracle 26 59 0 6390M 5490M run 0:27 8.58% oracle
19648 oracle 36 31 0 6418M 5516M run 0:21 5.92% oracle
19023 oracle 34 30 0 6398M 5498M run 0:37 5.88% oracle
7229 oracle 38 30 0 6427M 5514M run 234:24 5.69% oracle
6912 oracle 45 31 0 6395M 5483M cpu/16 218:04 5.31% oracle
7216 oracle 28 31 0 6430M 5517M run 232:40 5.04% oracle
19644 oracle 35 40 0 6390M 5490M cpu/17 0:24 4.74% oracle
6897 oracle 112 30 0 6392M 5479M run 236:38 4.52% oracle
3813 oracle 106 31 0 6428M 5528M run 100:11 4.43% oracle
18970 oracle 234 31 0 6398M 5499M cpu/0 1:45 4.15% oracle
19749 oracle 1 32 0 6386M 5486M run 0:00 4.05% oracle
19646 oracle 23 31 0 6405M 5505M run 0:25 3.61% oracle
18972 oracle 11 32 0 6398M 5497M run 2:18 3.61% oracle
7220 oracle 258 32 0 6468M 5555M cpu/3 113:13 3.56% oracle
During the entire issue there was no %iowait.

How to differentiate IAS ORACLE Home Patches and database patches

Hi Team,
I would like to know how to find out the difference between IAS ORACLE Home patches and Database patches.
I am new to oracle apps.
Please let me know.
Thanks,
Kamal

user10493335 wrote:
Hi Huseein
Here is the patch number Patch 13919058
we are on e-business suite 12.1.3.How to integrate oracle e-business suite with ODI.
Thanks,
KamalIt should be applied to ODI ORACLE_HOME -- How To Install Oracle Data Integrator (ODI) 11g Interim Patches (PSE) With OPatch [ID 1235136.1]
Thanks,
Hussein

Import/Export problems after patching oracle from 9.2.0.1 to 9.2.0.5

Hi, After I applied the 5 patch to oracle 9201 on Win XP the export utility has started to complain about
EXP-00008: ORACLE error 942 encountered
ORA-00942: table or view does not exist
EXP-00024: Export views not installed, please notify your DBA
EXP-00000: Export terminated unsuccessfully
And after I applied catexp.sql script, it didn't fix the issue with export, the error message has become like this:
EXP-00056: ORACLE error 31600 encountered
ORA-31600: invalid input value EMIT_SCHEMA for parameter NAME in function SET_TRANSFORM_PARAM
ORA-06512: at "SYS.DBMS_SYS_ERROR", line 105
ORA-06512: at "SYS.DBMS_METADATA_INT", line 3926
ORA-06512: at "SYS.DBMS_METADATA_INT", line 4050
ORA-06512: at "SYS.DBMS_METADATA", line 836
ORA-06512: at line 1
EXP-00000: Export terminated unsuccessfully
Can someone advise, what's wrong with it? With oracle 9.2.0.1 export worked fine, after upgrade to 9.2.0.5 it fails every time it gets to the table data export stage.
Thanks in advise

It seems that you have found an answer in other forum :
Imp/Exp problems after patching oracle to 9205
Nicolas.

How to find out difference between IAS Oracle Home patches and 10.1.2 Oracl

How to find out difference between IAS Oracle Home patches and 10.1.2 Oracle Home patches.
I have read me document but i could not able to understand.
Please help me

user10721329 wrote:
How to find out difference between IAS Oracle Home patches and 10.1.2 Oracle Home patches.
I have read me document but i could not able to understand.
Please help meWhat docoument you are referring to?
If you source the application env file APPS<CONTEXT_NAME>.env file under $APPL_TOP directory then this will set ORACLE_HOME to 10.1.2
If you source the application env file <CONTEXT_NAME>.env file under $INST_TOP/ora/10.1.3 directory then this will set ORACLE_HOME to 10.1.3
Environment Settings
http://docs.oracle.com/cd/E18727_01/doc.121/e12841/T120505T120509.htm#F_92659x3Ax20H1x20Head1x3Ax20Environmentx20Settings
Thanks,
Hussein

Adding componets to oracle home after patching

Similar Messages

Maybe you are looking for