Adding contacts doesn't work

Just downloaded skype. Instructions -which are impossible to find- say to click on People icon on the left and then to click on the + on the right to add contacts. Clicking on Peopke does nothing.
How do you add contacts???

Hi
Have you tried logging out of AIM and logging back in again.
Tony

Similar Messages

Voice command for Contacts doesn't work after a re...

Voice command for Contacts doesn't work after a reboot or a contacts restore.
Steps to reproduce:
1. Backup contacts. Open Files > Backup & Restore > Select Contact for Backup Contents and select Back up now.
2. Edit/save a contact, press and hold the call button, speak contacts name. The voice recognition works fine.
3. Restore contacts. Open Files > Backup & Restore > Select Contact for Backup Contents and select Restore.
4. Reboot phone when prompted.
5. Press and hold the call button, speak contacts name. The voice recognition does not work.
Work around:
Edit and save each contact.
Additional Information:
Social integration with contacts also does not work after a reboot. The facebook icon and "See what xxx is up to on Facebook" is not displayed. The same work around "Edit and save each contact" also applies. This occurs using the Nokia N8 and Nokia 808 Pureview.

Nancy2015 wrote:
I have my phone paired with my car, I can do everything except it does not recognize any of my contact names. If I try say a contact name, it says "not recognized" but if I say the contacts phone number, the name pops up onthe display in my car.
Has anyone had this issue, is there a setting I am missing in my phone?
Hello,
This is not necessarily and issue with the phone. It could also be an issue with the car`s bluetooth software that is only limited to some functions like reading your contacts list, last calls, missed calls, etc. which is most likely the basic 2.0 version.
The Z30 has the 4.0 version that has a lot more communication capability but if the car`s bluetooth its a lower version, then you will not be able to take full advantage of it unless you upgrade the bluetooth software in your car. Call your dealer and inquire about the bluetooth software upgrade in your car

Contacts doesn't work

I tried to use iCloud to sync my contacts from my iPhone to my MacBook Air. But now, my contacts application on my MacBook Air doesn't work. How can i fix it?

It says: Contacts quit unexpectedly.

1.3.5 update - lookup map from Contacts doesn't work for Sprint Nav or Google maps

Is anyone able to tap on a contact's address in order to launch Sprint Navigation? Or even Google Maps? In my case, Google maps alway navigates to *my* address, not the contact's address I tapped on.
Worse, my Pre hangs on the Sprint Nav splash screen when choosing that option -- similar to what others are noticing. I copied this from another forum, as it describes my problem as well:
I updated Default Applications to launch Sprint Navigation for addresses. It certainly launches from an open Contact, but locks up on the splash screen. It never displays a map (nor anything else), and the menu doesn't function. Completely unresponsive. If I launch the app stand-alone, it works fine, so Sprint Navigation doesn't seem to be broken. It just doesn't work launching from a contact address.
I've switched the default app back and forth between Google Maps and Sprint Navigation, and did a couple restarts to no avail.
Regards,
Paul
Post relates to: Pre p100eww (Sprint)

Thanks for the feedback and link to confirm this issue. I confirmed what the other fellow wrote on that thread:
if you already have Sprint Nav open, then click the address is goes fine.
I also "fixed" the issue in which Google maps loaded but always went to *my* location. I fixed this by exorcising the unofficial Google Latitude version of Maps from my Pre.I picked up this version by following a hyperlink to the beta Latitude a number of days ago, and ever since it had replaced the regular G Maps. I was able to clear Latitude off my device by pointing the browser to maps.google.com to reload the original flavor.After that, I am able to properly launch G Maps from a contact's address field. Whew!
Regards,
Paul
Message Edited by paul_flory on 12-30-2009 11:04 PM

Assigning text tone to particular contact doesn't work on my Mac

I have been trying to assign text tones to particular contacts in Yosemite by clicking the drop-down while editing my contacts in the Contacts app and choosing the text tone, but it doesn't seem to work. Every time a message comes in from those contacts, it always uses the default alert that is set in the Messages app. What's going on? Is it a bug or something?

Send Apple feedback. They won't answer, but at least will know there is a problem. If enough people send feedback, it may get the problem solved sooner.
Feedback
Or you can use your Apple ID to register with this site and go the Apple BugReporter. Supposedly you will get an answer if you submit feedback.
Feedback via Apple Developer

Satellite P300 - Value Added package doesn't work after computer restart

Hi,
I have got Toshiba Satellite P300 PSPCCA running windows vista ultimate 64x. I can not get my soft touch button working. I downloaded latetest TVA Package and installed it. After installation it asks for restart but I dont restart my laptop and I just perform Restart Flash Card and my soft touch button works all good which is mute, media player,etc. but once I restart my laptop it stops working.
I have tryed uninstalling and reinstalling software but no luck. I have read in toshiba forum about running CCleaner and do fresh installation but still have same problem.
Does any of you know how to fix it.
BTW i have got AVG internet security software on my system but have have added toshiba folder to exclude from realtime scanning just in case if its causing problem but no luck. I have searched qurantine folder and its nothing in there.
Please help me to get my soft touch button working.
Thanks.
Regards,
Jay
Message was edited by: Jay Padia

Hello Jay
I agree with Akuma. All you can do is to remove preinstalled VAP from the system and install latest version again. Why you didnt follow instruction to restart notebook after VAP installation?
I have installed VAP several times on my Satellite P200 and Satellite A300 without any problems but after latest version installation I have restarted notebook immediately. The installations procedure was finished and needed processes started in the background. I presume this is the problem on your Satellite P300.
If nothing helps the last step is to install OS again using recovery installations DVD. After doing this you will have clean preinstalled OS and everything will work well again.

Itunes File Sharing: Adding files doesn't work

Hi,
i have a problem adding files via Itunes File Sharing in Apps. Here's my setup:
Windows 7 64bit, german
Itunes 11.1.5.5, x64, german
Iphone 5s, 32GB, directly attached via USB
several apps with file sharing support (OpenVPN, VLC, Good Reader...)
Now, when i choose one of the apps and click "Add...", i get a file selection dialogue, select a file and click 'ok'... that's it.
Nothing happens. The file is not added to the window.
It's not added to the phone after a sync, so it doesn't seem to be a display problem. But i don't get an error message at
any point, so i'm quite flattered where to start looking for the problem.
Steps so far:
Reinstallation Itunes - no effect
Reinstallation Drivers - no effect
Starting with a new media library - no effect
The only thing suspicious are some bonjour errors in the windows logs. But even with disabled bonjour service the problem persists.
I've searched for this in the forums but didn't find a proper thread/answer for this.
Anyone coming up with an idea? At least where to look for the problem? Is there a log file/command line parameter/deep inside special genius trigger to pull? I'm getting out of options here. :/
Thanks a lot!
Regards from germany,
l0calhost

Problem solved. Complete deinstallation of ITunes, computer restart, telephone restart and finally reinstallation of the app did the trick.
But still, how would you debug a problem like this, when no error message comes up at any point?

.mov files appear as Unix after recovery, adding extension doesn't work

(Also posted in Quicktime forum)
Whilst backing up (with Synchronise X) a drive, I accidentally clicked to allow around 15GB worth of Quicktime files to be deleted, in two folders. Realising my mistake, I stopped the back up immediately, and recovered all the files with Disk Drill. One folder recovered correctly, however the other folder recovered the files as 'Unix executable files'. I have tried adding the .mov extension to these files, tried opening from within Quicktime, but always get the error message that the files are not a movie. I tried telling the file to open with QT in the Get Info windoww, still without success. All the files are of a size which seem to be about right for what they are supposed to be, but I cannot get them to open as movies.
One observation: the files which recovered correctly all had '.mov' in their file names at the time of recovery, all those with which I am having a problem had no extension name showing.
I've searched through these forums and elsewhere - most people get the files to work by adding the .mov extension, but for me this is not the answer. Are there any more tricks?

Thanks guys for your speedy suggestion, both of you!
I tried QT Repair, and when that was unsuccessful, moved onto Media Salvage, as suggested by QT Repair. The final report was that the media was seriously corrupted, so I had no success.
It seems odd to me that the rescued files in one folder from the original delete are OK, but those in the other folder are unrescuable, even though there was clearly no time to overwrite all those files before I cancelled the delete action.
Fortunately they are backed up elsewhere, 5,000 miles away, but that's another story.

Syncing with Google Contacts doesn't work anymore

Hey everyone,
my iPhone 3g recently stopped syncing with Google Contacts (I can't exactly say since when, but approximately since one week). Before, it worked perfectly fine for the roundabout 2 months i have my iPhone now. iTunes is up to date, as is my iPhone software. Also, i didn't change my Google Password or anything. iTunes also - while syncing my iPhone - tells me for a few seconds it's syncing, but nothing seems to happen. What shall i do?
David

This probably means that you are using iWeb 08 or iWeb 2 and you are correct that this will not run on the latest software, however iWeb 09 or 3 will, so if you want it to work, you will have to purchase iWeb 09, contained in either iLife 11 or iLife 09 via Amazon.
No, of course you won't find iWeb for sale in the App store because as this thread has been telling you, both it and MobileMe have not existed for at least that last 2 years and Apple withdrew support for iWeb sometime ago along with MobileMe, which has now become iCloud.
If you want iWeb 09, you will have to purchase it from Amazon - this is the only way that you can get it, but now might be a good time to move on and use some software that is both sold and supported such as EverWeb. Take a look at it. It is designed to be like iWeb but you can do a lot more.

Adding JScrollPane doesn't work... hmm....

    private void jbInit() throws Exception {
        this.getContentPane().setLayout(null);
        this.setSize(new Dimension(400, 300));
        this.setTitle("All Videos Own By Store");
        ta_show.setBounds(new Rectangle(30, 25, 320, 220));
        ta_show.setEditable(false);
        ta_show.setEnabled(false);
        JScrollPane scrollingArea = new JScrollPane(ta_show);
        getContentPane().add(scrollingArea);
        this.getContentPane().add(ta_show, null);
        //this.getContentPane().add(scrollingArea);
        this.setVisible(true);
    }ta_show is the JTextArea...
I will load a text file into the JTextArea and it should show the JScrollPane since the text file is quite large... But it doesn't show..
Any ideas?

try this for size:
    private void jbInit()
        JPanel p = new JPanel();
        p.setPreferredSize(new Dimension(400, 300));
        p.setLayout(new BorderLayout());
        int eb = 20;
        p.setBorder(BorderFactory.createEmptyBorder(eb, eb, eb, eb));
        ta_show.setPreferredSize(new Dimension(800, 600)); // or however big you want it
        ta_show.setEditable(false);
        //ta_show.setEnabled(false);
        JScrollPane scrollpane = new JScrollPane(ta_show);
        p.add(scrollpane, BorderLayout.CENTER);
        getContentPane().add(p);
    }

Contact doesn´t work | E-Mail didn´t come in

Hi everyone,
the e-mail account which is registered to my muse account didn´t get the test-mail I sent through the contact widget.
The website is currently online via Business Catalyst.
I was wondering how I can check which mail account is connected to my muse website. Because I thought it is automatically the e-mail which is connected to the muse account..?
Best,
Pink

You can configure which email address the form sends to in the form widget UI.
Note that email make take up to an hour to be delivered...

Dynamically adding ColumnSeries doesn't work

I created the following code to create different series dynamically:
<?xml version="1.0" encoding="utf-8"?>
    <s:Application xmlns:fx="http://ns.adobe.com/mxml/2009"
        creationComplete="application1_creationCompleteHandler(event)"
        xmlns:s="library://ns.adobe.com/flex/spark"
        xmlns:mx="library://ns.adobe.com/flex/mx" minWidth="955" minHeight="600">
        <fx:Script><![CDATA[
            import mx.charts.series.ColumnSeries;
            import mx.collections.ArrayCollection;
            import mx.collections.Sort;
            import mx.collections.SortField;
            import mx.events.FlexEvent;
            [Bindable]
            public var Loc01:ArrayCollection = new ArrayCollection([
                {date:"2002", close:41.87, loc: "Location 01"},
                {date:"2005", close:48.06, loc: "Location 01"},
                {date:"2006", close:48.06, loc: "Location 01"},
                {date:"2002", close:157.59, loc: "Location 02"},
                {date:"2003", close:160.3, loc: "Location 02"},
                {date:"2003", close:45.74, loc: "Location 01"},
                {date:"2004", close:42.77, loc: "Location 01"},
                {date:"2004", close:150.71, loc: "Location 02"},
                {date:"2002", close:45.74, loc: "Location 03"},
                {date:"2003", close:42.77, loc: "Location 03"},
                {date:"2004", close:150.71, loc: "Location 03"},
                {date:"2005", close:156.88, loc: "Location 02"}
        protected function application1_creationCompleteHandler(event:FlexEvent):void
            // TODO Auto-generated method stub
            var obj:Object;
            var arr:Array = [];
            var i:int;
            var ac1:ArrayCollection;
            var NS:ColumnSeries;
            var sortA:Sort = new Sort();
            var sortByLocation:SortField = new SortField("loc",false,false,false);
            var sortByDate:SortField = new SortField("date", true, false, false);
            sortA.fields=[sortByLocation, sortByDate];
            Loc01.sort=sortA;
            Loc01.refresh();
            i=0;
            arr[i] = Loc01[0].loc;
            for each(obj in Loc01){
                if(arr[i] != obj.loc)
                    i++;
                    arr[i] = obj.loc;
            var str: String;
            i=0;
            for each(str in arr){
                ac1 = new ArrayCollection();
                for each(obj in Loc01){
                    if(str == obj.loc)
                        ac1.addItem(obj);
                ac1.refresh();
                if(!myChart.series[i])
                    myChart.series.push(new ColumnSeries());
                NS = myChart.series[i];
                NS.dataProvider = ac1;
                NS.yField = "close";
                NS.horizontalAxis = h1;
                NS.displayName = str;
                NS.verticalAxis = v1;
                NS.id = "cs" + i.toString();
                i++;
    ]]></fx:Script>
    <fx:Declarations>
        
    </fx:Declarations>
    <mx:Panel x="49" y="30" width="868" title="Column Chart With Multiple Axes">
        
        <mx:ColumnChart id="myChart" width="601" showDataTips="true" dataProvider="{Loc01}">
            <mx:horizontalAxis>
                <mx:CategoryAxis id="h1" categoryField="date"/>
            </mx:horizontalAxis>
            <mx:horizontalAxisRenderers>
                <mx:AxisRenderer placement="bottom" axis="{h1}"/>
            </mx:horizontalAxisRenderers>
            <mx:verticalAxisRenderers>
                <mx:AxisRenderer placement="left" axis="{v1}"/>
            </mx:verticalAxisRenderers>
            <mx:verticalAxis>
                <mx:LinearAxis id="v1" minimum="30" maximum="170"/>
            </mx:verticalAxis>
            <mx:series>
                <mx:ColumnSeries id="cs0"/>
            </mx:series>
        </mx:ColumnChart>
    </mx:Panel>
</s:Application>
The hard coded ColumnSeries (the first one) works fine, but the next series which are created dynamically don't work. What's wrong in my code? Any help would be much appreciated.

I replaced the following part of the code:
     if(!myChart.series[i])
          myChart.series.push(new ColumnSeries());
with the following lines:
     if(!myChart.series[i])
          var tmp:Array = myChart.series;
          tmp.push(new ColumnSeries());
          myChart.series = tmp;
          myChart.invalidateSeriesStyles();
And it works fine now.

Open Outlook Contact doesn't work in Microsoft Lync for Mac ver14.0.10

Hi guys,
as the subject, no response after I click "Open Outlook Contact" in Lync contact card. Does it a known issue?
Thanks!
Charlie

Thanks Eric!
I built an OS X VM, and installed office for mac 2011, Lync for mac 2011. But the Open Outlook Contact button in Lync Contact Card is gray (I cannot click it). It shows below error.
I can click that button but no response in my MACBOOK PRO.
It's crazy for me. Can you share the software download location and install sequence with me?
I downloaded Office for Mac 2011 & Lync for Mac 2011 from my MSDN subscription download.
Thanks!
Charlie

SoftKeyboardType property of StageText : some values doesn't work on Android

Hello,
on my Galaxy Nexus Android 4.2.2, when I use the softKeyboardType property of StageText :
"number" and "email" work,
but "punctuation", "url", and "contact" doesn't work.
http://help.adobe.com/en_US/FlashPlatform/beta/reference/actionscript/3/flash/text/StageTe xt.html#softKeyboardType
Why some values doesn't work ?
I need the constant "punctuation", please help.
Thanks

Hi,
Thank you for your bug report. We are able to reproduce the issue. Could you please open a new bug report on this over at bugbase.adobe.com? Once the bug has been added would you mind posting back with the URL so that others affected can add their votes and comments?
Thanks once again for reporting this.
-Nimit

Contacts search not working

On my 4s the search feature within contacts doesn't work, every search returns no results. I think it started when I upgraded to ios5 but I'm not quite sure, it's been a while. It used to work.
The spotlight search works and I've tried deselecting all options in it except contacts.
Any ideas how to fx this please?

Thanks for the quick reply :)
The search doesn't work even if I put in a name exactly as its listed. It used to be for example if I typed 'A' then all the names starting with 'A' would list but now I get nothing.

Adding contacts doesn't work

Similar Messages

Maybe you are looking for