Adding cost element to a particular hierarchy in RSH1 leads to shortdump.

Hi,
I'm facing some issue in production for TCode-RSH1.
Adding cost element to a particular hierarchy in RSH1 leads to shortdump. (Assign_Type_Illegal_Cast). This problem is causing for some hierarchies only.
Steps followed by us for adding cost element:-
1) RSH1-select hierarchy name.
2) In change mode, select a paticular node, click on cost element.
3) Select any of the cost element & click the green button (tick)
When we are following the above steps, it is leading to short dump and giving the following error message:-
Assign_Type_Illegal_Cast.
This issue is causing for some hierarchies & not for all.
Request to suggest the solution..
Regards,
SDN User.

Hi Venkat,
That particular hierarchy is not having multiple nodes. Only one node named Rate & efficiency. and the user needs to add cost element to that node. Now how come your ans match here in this case.
Now is that you are telling that one cost element which is selected is there for that node in some other hierarchy?But it is a different hierarchy , so if it is then it would be a problem?
Or else I have one more doubt....
Is that the user might be having some authorization problem for that particular hierarchy or the info object or cube where the hierarchy is? Because he is saying that he is having this problem for some few only not all hierarchies. So its understandable that RSH1 authorization to edit and create he has.

Similar Messages

KEDR - Testing Newly added Cost Element to Derivation Rule

Hi There -
Background: We have Column in COPA KE30 report - 3BOXID. This field is updated with Blank and the reason we found is cost element is missing in dervation rule and we added the respective cost element to Derivation Rule
Can you please help me in testing this
Thanks
Sri

Hi,
Basically i understand that you wish to have HR posting to COPA
Please take a look at attached note 130344.
Basically according to the note there are 2 options:
1. The update of data from the Payroll in Controlling should be carried out in the standard system to the cost center. The actual commissions posted to cost center can then be posted to Profitability Analysis by assessment.
2. If you assign the relevant account via the automatic account assignment in transaction OKB9 to profitability segment a costing-based CO-PA document should be created for the postings of transaction PCP0. The profitability segment determined should only be filled rather scarcely though as not much information is available in this case.
regards
Waman

MP001500 - adding cost elements

Hi
SAP seems to deliver a screen (3450) for MP200000 - which displays Cost Element information in list view for IT2010. We would like a similar functionality for IT0015. Would this be done through modifying the element list in MP001500/3000 (or a copy of 3000) - or through PM01? The required elements are available through strucure PREF.
Any advice/best practice (also for naming std.) appreciated.
/Kirsten

HI
I think its not possible to create LSMW project For uploading cost elements...
Even i tried using LSMW bt it not displaying the Cost Element fields to Upload....
Regards
Smitha

Adding cost centers to Comp Codes in BI

Hello All,
Could you please let me know the process of adding cost centres to a particular company code in BI 7.0.
And also the transport process.Is it similar to R/3?
Thanks

Hi Tripathi,
1) Check the documentation of this bapi 2) Show this message your FI consultant.
Regards,
Madhu.

Secondary cost element actual data not posted

Hi Gurus,
Actually we are posting the actual cost elements data into particular cost cenetr through batch job.upto 12/31/2009 the actual data is showing for the particular secondary cost element(overheads).Only after 01/01/2010 the actual data is not posted for this particular cost element inthat particular cost center.For the remining cost elements into that particular cost cnetr the actual data is posted thru batch job.We checked that particularsecondary cost element,the validity period is upto 31/12/9999.Suggest on this one.
Thanks in advance
Jana

Hi,
Did you execute overhead allocation processes as from 01/01?
Regards,
Eli

Planning on Cost Element group

Hi Guys,
I have a PLAN Query with costelement in the rows and i am extracting costelement group hierarchy from R/3 and using the hierarchy on the costement in the rows.
Now i have a requirement users want to enter the PLAN data at the costelement Group level but NOT at the costelement level BUT the problem is COSTELEMENT GROUP is a TEXT Node.
How do i handle this situation.
Shashi

Hi Shashi,
Create 2 Char - 1) Cost Element Group & 2) Cost Elements. Using External Hierarchy button in the char IO maintenance, select Cost Element Char as an external Hierarchy in the Cost Element Group char. And then create a separate Hierarchy on the main basic char Cost Element Group.
Before you build the hierarchy maintain master data for both char..
Hope this helps.
Jason

Loading cost element hierarchy

Hello experts,
I have got 2 questions
1) I am trying to load cost element hierarchy and there are about a 100 hierarchies which i need to load.. do i have to manually select all of these one by one to load or is there an easier way to do it ?? is there a way to select all the hierarchies which are showing up in the Infopackage selection.
2) Now lets say there is a change to one of the hierarchies which i have loaded...let's say a new account group has been added to a particular hierarchy which i have already loaded? Do i have to reload that particular hierarchy manually ?? Is there anyway to automate this process ?? like loading the hierarchies automatically from time to time so that whatever changes have been made to the hierarchy in R/3 are being taken into account when the query is run.
Thanks,
Bose

Hi,
As Eric has mentioned, there is no other ways but to create 1 infopackage for each of the hierarchy.
However, I think there must be some relationship with the 100 hierarchies you have. From what I know, in R3, if I have the following hierarchy
PnL
|- EBITDA
   |-- Net Cost
       |- Gross Operating Expenses
       |- Salary/Oncosts
   |-- Gross Margin
And when you create an infopackage in BW for this hierarchy of characteristic 0COSTELMNT, potentially you'll be seeing hierarchies for PnL, EBITDA, Net Cost, Gross Operating Expenses etc..... So sometimes it does not mean that you have to create 1 infopackage for each of these.... you simply have to select the PnL in this case.
Suggest that you check with you FI/CO colleague and see which is the main hierarchy...
Hope this helps.
Cheers,
Gimmo

BW: Cost Element Hierarchy - from R/3 plus additional node in BW

Hi all,
We have cost element hierarchy (say ZP14PL) which we schedule to update periodically from R/3 into BW . However we would like to add an additional sub-node under this same hierachy via RSH1. As this subnode is only for BW use, this is not maintained in the hierarchy ZP14PL in R/3. With the 'full update' or 'update Subtree' option in the infopackage the hierachy ZP14PL will be deleted and replaced with the latest changes thus removing the additional node which we created for BW only.
Any suggestion as to how we could have the latest hierarchy updated from R/3 without deleting the additional subnode that we added in the same hierachy in BW?
Appreciate all expert advice.
Thanks and best regards,
VC

An easy way would be to include this link into the file using a start routine....
you should know the child node and parent nodes for the same and since the location of the same is going to be constant - you could add it to your start routine....
Or have a time dependent hierarchy but that would mess up your reporting...
Also this is not the correct forum to post BI relevant questions - suggest you post the same in the BI forums for more relevant answers....
Arun
Message was edited by:
Arun Varadarajan
[message moved to BI]

No data found due to cost element adding leading values in report

Hi Experts,
I have an issue where when the run the analyser with some values in variable screen it is displaying the output correctly in analyser tool. I am filtering the cost element with a single value for ex 4545000 and I have kept that in rows . Still the report is working fine. But then when I go back to variable screen and change the input for ex instead of period 3 if I change it to 4 , output is null since the cost element is adding leading values to the existing value in the filter and displaying no result. for ex 4545000 is getting added with controlling area 0050 and its searching for 00500004545000 and since this is not the cost element value its not displaying output..
Any ideas how to rectify this or is it a analyser tool issue..
Thanks in advance
Kishore

Hi,
In my system it looks like this:
Note that superior infoobject to 0costcenter is 0co_area
Hope this helps,
Leszek

Cost element hierarchy stored in which table..

Hi Experts,
could you please tell me which tables are storing the cost element hierarchy, which is displayed
in KAS3 hierarchy...like cost center group hierarchy is stored in SETNODE , which is displayed in
KSH3 transaction.
Thanks.

Check these tables.
TKZU1
EVCE
TPIK2
TPIK3
TORB1

RSA2/Cost Element Hierarchy (0COSTELMNT_0102_HIER)/remove 0CO_AREAP Prefix

Hi, gurus.
We are using 0COSTELMNT_0102_HIER delivered infosource. This datasource is extracting from our source system the cost element hierarchy. When loading into BW, every element is getting a controlling area Prefix (cost element characteristics, hierarchy nodes and hierarchy name). This is the standard behaviour.
Our requirement is to remove Controlling Area prefix from every hierarchy node and from hierarchy name, but not from characteristic elements.
eg......0CO_AREA........0COSTELMNT............0HIERNAME
.........M650..................RU_SIGMA................M650RU_SIGMA
.........M660..................RU_SIGMA................M660RU_SIGMA
And we want to get the hierarchy name without the controlling area, so:
....................................................................0HIERNAME
....................................................................RU_SIGMA
We can´t upload the hierarchy from a flat file cause we want to load and refresh it daily from the source system.
We've asked in Marketplace about the missing "change" option in RSA2 transaction, cause we see 2 options to do this:
1) Create a customer datasource for 0COSTELMNT hierarchy with RSA2 and use 2 custom function modules for extraction and hierarchy catalogs.
2) Modify 0COSTELMNT_0102_HIER and call 2 new custom function modules for catalog and data extraction (GSBH_HIERARCHY_TRANSFER_SETS, GSBH_HIERARCHY_CATALOG_SETS)
In any case, we would need access to RSA2 with create/modify authorization.
They answered that RSA2 is for display only. Here is their answer:
"RSA2 is a display only transaction. This transaction is not released for changes in customer systems. The reason is that there would be risks due to incorrect modifications."
I've also tryed BW07 transaction, but it is just for sets created with GS01 transaction (hierarchy class 0000), and I can´t create a custom datasource for Cost Element from this point.
If is there another way to supress controlling area prefix??
Our Development team don´t want the idea to modify GSBH_HIERARCHY_TRANSFER_SETS, GSBH_HIERARCHY_CATALOG_SETS function modules without an OSS note that says so.
Thanks in advance, Leticia
I'm having just the same problem mentioned in this thread /community

I have created a ABAP program to download the costelementgroup from SAP R/3 into a flatfile. 
Hope this helps.
&---- 
*& Report Z_EXTRACT_COSTELMNTGRP_HIER 
*& 
&---- 
*& 
*& 
&---- 
 
REPORT Z_EXTRACT_COSTELMNTGRP_HIER. 
 
************************************************************************ 
TABLES 
************************************************************************ 
 
TABLES: SETLEAF, 
 CSKU, 
 CSKT. 
 
************************************************************************ 
TYPES 
************************************************************************ 
 
TYPES: BEGIN OF T_FL_SETLEAF, 
 SETNAME TYPE SETLEAF-SETNAME, 
 LINEID TYPE SETLEAF-LINEID, 
 VALOPTION TYPE SETLEAF-VALOPTION, 
 VALFROM TYPE SETLEAF-VALFROM, 
 VALTO TYPE SETLEAF-VALTO, 
 LTEXT TYPE CSKU-LTEXT, 
 END OF T_FL_SETLEAF. 
 
TYPES: BEGIN OF T_FL_CSKU, 
 KSTAR TYPE CSKU-KSTAR, 
 LTEXT TYPE CSKT-LTEXT, 
 END OF T_FL_CSKU. 
 
TYPES: BEGIN OF T_FL_CSKB, 
 KOKRS TYPE CSKB-KOKRS, 
 KSTAR TYPE CSKB-KSTAR, 
 DATBI TYPE CSKT-DATBI, 
 END OF T_FL_CSKB. 
 
TYPES: BEGIN OF T_FL_HIER, 
 NID(8) TYPE N, 
 IOBJ(30), 
 NNAME(32), 
 PID(8) TYPE N, 
 HID TYPE I, 
 VALC TYPE I, 
 DESC(60), 
 END OF T_FL_HIER. 
 
TYPES: BEGIN OF T_FL_MKHIER, 
 HID TYPE I, 
 PID(8) TYPE N, 
 END OF T_FL_MKHIER. 
 
TYPES: BEGIN OF T_FL_FINAL, 
 OUT(500), 
 END OF T_FL_FINAL. 
 
************************************************************************ 
WORKAREAS 
************************************************************************ 
 
DATA: VFL_CSKU TYPE T_FL_CSKU, 
 VFL_CSKB TYPE T_FL_CSKB, 
 VFL_SETLEAF TYPE T_FL_SETLEAF, 
 VFL_HIER TYPE T_FL_HIER, 
 VFL_HIER1 TYPE T_FL_HIER, 
 VFL_MKHIER TYPE T_FL_MKHIER, 
 VFL_FINAL TYPE T_FL_FINAL, 
 VFL_SETHIER TYPE SETHIER_CO. 
 
DATA: V_SETHEADER TYPE SETHEADER. 
 
************************************************************************ 
INTERNAL TABLES 
************************************************************************ 
 
DATA: VIT_CSKU TYPE STANDARD TABLE OF T_FL_CSKU, 
 VIT_CSKB TYPE STANDARD TABLE OF T_FL_CSKB, 
 VIT_SETLEAF TYPE STANDARD TABLE OF T_FL_SETLEAF, 
 VIT_SETLEAF1 TYPE STANDARD TABLE OF T_FL_SETLEAF, 
 VIT_HIER TYPE STANDARD TABLE OF T_FL_HIER, 
 VIT_MKHIER TYPE STANDARD TABLE OF T_FL_MKHIER, 
 VIT_FINAL TYPE STANDARD TABLE OF T_FL_FINAL, 
 VIT_SETHIER TYPE SETHIER_CO OCCURS 0 WITH HEADER LINE, 
 VIT_SETVAL TYPE SETVAL_CO OCCURS 0 WITH HEADER LINE. 
 
************************************************************************ 
VARIABLES 
************************************************************************ 
 
DATA: NID(8) TYPE N, 
 PID(8) TYPE N, 
 CSTEL(14) TYPE N, 
 SETCLS(4) TYPE C, 
 IOBJ(10) TYPE C, 
 HID TYPE I, 
 NHID(8) TYPE N, 
 NVALC(8) TYPE N, 
 OUT(500), 
 L_FLAG(2) TYPE N, 
 L_LINK(1), 
 L_COAREA LIKE BAPICO_GROUP-CO_AREA, 
 RETURN LIKE BAPIRET2. 
 
************************************************************************ 
SELECTION SCREEN INPUTS 
************************************************************************ 
 
SELECTION-SCREEN BEGIN OF BLOCK SS01 WITH FRAME TITLE TEXT-002. 
PARAMETERS: P_SUBCLS(4) OBLIGATORY, "Org. eenheid bepalen 
 P_SETNM(15) OBLIGATORY. "Kostensoortgroep bepalen 
SELECTION-SCREEN END OF BLOCK SS01. 
 
SETCLS = '0102'. "Setklasse voor kostensoortgroep 
IOBJ = '0COSTELMNT'. "InfoObjectnaam voor kostensoort 
 
SELECT SETNAME LINEID VALOPTION VALFROM VALTO INTO TABLE VIT_SETLEAF 
 FROM SETLEAF 
 WHERE SUBCLASS = P_SUBCLS 
 AND SETCLASS = SETCLS. 
 
SELECT KSTAR LTEXT INTO TABLE VIT_CSKU 
 FROM CSKU 
 WHERE KTOPL = P_SUBCLS 
 AND SPRAS = 'NL'. 
 
LOOP AT VIT_SETLEAF INTO VFL_SETLEAF. 
 
IF VFL_SETLEAF-VALOPTION = 'EQ'. 
 
 READ TABLE VIT_CSKU INTO VFL_CSKU WITH KEY 
 KSTAR = VFL_SETLEAF-VALFROM BINARY SEARCH. 
 
 IF SY-SUBRC = 0. 
 
 VFL_SETLEAF-LTEXT = VFL_CSKU-LTEXT. 
 
 IF VFL_SETLEAF-LTEXT IS INITIAL. 
 
 SELECT SINGLE KTEXT FROM CSKU INTO VFL_SETLEAF-LTEXT 
 WHERE SPRAS = 'N' 
 AND KTOPL = P_SUBCLS 
 AND KSTAR = VFL_SETLEAF-VALFROM. 
 
 ENDIF. 
 
 APPEND VFL_SETLEAF TO VIT_SETLEAF1. 
 
 ENDIF. 
 
 CLEAR VFL_CSKU. 
 
ELSEIF VFL_SETLEAF-VALOPTION = 'BT'. 
 
 LOOP AT VIT_CSKU INTO VFL_CSKU 
 WHERE KSTAR GE VFL_SETLEAF-VALFROM 
 AND KSTAR LE VFL_SETLEAF-VALTO. 
 
 VFL_SETLEAF-VALFROM = VFL_CSKU-KSTAR. 
 VFL_SETLEAF-VALTO = VFL_CSKU-KSTAR. 
 VFL_SETLEAF-LTEXT = VFL_CSKU-LTEXT. 
 
 IF VFL_SETLEAF-LTEXT IS INITIAL. 
 
 SELECT SINGLE KTEXT FROM CSKU INTO VFL_SETLEAF-LTEXT 
 WHERE SPRAS = 'N' 
 AND KTOPL = P_SUBCLS 
 AND KSTAR = VFL_SETLEAF-VALFROM. 
 
 ENDIF. 
 
 APPEND VFL_SETLEAF TO VIT_SETLEAF1. 
 
 CLEAR VFL_CSKU. 
 
 ENDLOOP. 
 
ENDIF. 
 
CLEAR VFL_SETLEAF. 
 
ENDLOOP. 
 
CLEAR VIT_SETLEAF[]. 
 
SORT VIT_SETLEAF1 BY SETNAME VALFROM. 
 
CALL FUNCTION 'K_GROUP_REMOTE_READ' 
EXPORTING 
 setclass = SETCLS 
 co_area = L_COAREA 
 chrt_accts = P_SUBCLS 
 groupname = P_SETNM 
IMPORTING 
 return = RETURN 
TABLES 
 et_sethier = VIT_SETHIER 
 et_setval = VIT_SETVAL. 
 
NID = 00000001. 
PID = 00000000. 
 
LOOP AT VIT_SETHIER INTO VFL_SETHIER. 
 
IF NID EQ 00000001. 
 
 HID = VFL_SETHIER-HIERLEVEL. 
 
 VFL_HIER-NID = NID. 
 VFL_HIER-PID = PID. 
 VFL_HIER-HID = HID. 
 VFL_HIER-IOBJ = '0HIER_NODE'. 
 VFL_HIER-NNAME = VFL_SETHIER-GROUPNAME. 
 VFL_HIER-DESC = VFL_SETHIER-DESCRIPT. 
 VFL_HIER-VALC = VFL_SETHIER-VALCOUNT. 
 
 VFL_MKHIER-HID = HID. 
 VFL_MKHIER-PID = PID. 
 
 APPEND VFL_MKHIER TO VIT_MKHIER. 
 APPEND VFL_HIER TO VIT_HIER. 
 
 NID = NID + 1. 
 
 CLEAR: VFL_HIER, VFL_MKHIER. 
 
ELSE. 
 
 IF HID EQ VFL_SETHIER-HIERLEVEL. 
 
 HID = VFL_SETHIER-HIERLEVEL. 
 
 VFL_HIER-NID = NID. 
 VFL_HIER-PID = PID. 
 VFL_HIER-HID = HID. 
 VFL_HIER-IOBJ = '0HIER_NODE'. 
 VFL_HIER-NNAME = VFL_SETHIER-GROUPNAME. 
 VFL_HIER-DESC = VFL_SETHIER-DESCRIPT. 
 VFL_HIER-VALC = VFL_SETHIER-VALCOUNT. 
 
 NID = NID + 1. 
 
 APPEND VFL_HIER TO VIT_HIER. 
 
 CLEAR: VFL_HIER. 
 
 ELSEIF HID LT VFL_SETHIER-HIERLEVEL. 
 
 HID = VFL_SETHIER-HIERLEVEL. 
 PID = NID - 1. 
 
 VFL_HIER-NID = NID. 
 VFL_HIER-PID = PID. 
 VFL_HIER-HID = HID. 
 VFL_HIER-IOBJ = '0HIER_NODE'. 
 VFL_HIER-NNAME = VFL_SETHIER-GROUPNAME .
 VFL_HIER-DESC = VFL_SETHIER-DESCRIPT. 
 VFL_HIER-VALC = VFL_SETHIER-VALCOUNT. 
 
 READ TABLE VIT_MKHIER INTO VFL_MKHIER 
 WITH KEY HID = VFL_SETHIER-HIERLEVEL BINARY SEARCH. 
 
 IF SY-SUBRC = 0. 
 
 VFL_MKHIER-PID = PID. 
 MODIFY TABLE VIT_MKHIER FROM VFL_MKHIER. 
 
 ELSE. 
 
 VFL_MKHIER-HID = HID. 
 VFL_MKHIER-PID = PID. 
 APPEND VFL_MKHIER TO VIT_MKHIER. 
 
 ENDIF. 
 
 NID = NID + 1. 
 
 APPEND VFL_HIER TO VIT_HIER. 
 
 CLEAR: VFL_HIER, VFL_MKHIER. 
 
 ELSE. 
 
 HID = VFL_SETHIER-HIERLEVEL. 
 
 READ TABLE VIT_MKHIER INTO VFL_MKHIER 
 WITH KEY HID = VFL_SETHIER-HIERLEVEL BINARY SEARCH. 
 
 PID = VFL_MKHIER-PID. 
 
 VFL_HIER-NID = NID. 
 VFL_HIER-PID = PID. 
 VFL_HIER-HID = HID. 
 VFL_HIER-IOBJ = '0HIER_NODE'. 
 VFL_HIER-NNAME = VFL_SETHIER-GROUPNAME. 
 VFL_HIER-DESC = VFL_SETHIER-DESCRIPT. 
 VFL_HIER-VALC = VFL_SETHIER-VALCOUNT. 
 
 NID = NID + 1. 
 
 APPEND VFL_HIER TO VIT_HIER. 
 
 CLEAR: VFL_HIER. 
 
 ENDIF. 
 
ENDIF. 
 
ENDLOOP. 
 
LOOP AT VIT_HIER INTO VFL_HIER WHERE VALC NE 0. 
 
LOOP AT VIT_SETLEAF1 INTO VFL_SETLEAF WHERE SETNAME EQ VFL_HIER-NNAME. 
 
 VFL_HIER1-PID = VFL_HIER-NID. 
 VFL_HIER1-HID = VFL_HIER-HID. 
 VFL_HIER1-IOBJ = IOBJ. 
 VFL_HIER1-DESC = VFL_SETLEAF-LTEXT. 
 
 SELECT KOKRS KSTAR DATBI INTO TABLE VIT_CSKB 
 FROM CSKB 
 WHERE KSTAR EQ VFL_SETLEAF-VALFROM. 
 
 LOOP AT VIT_CSKB INTO VFL_CSKB WHERE DATBI GE SY-DATUM. 
 
 VFL_HIER1-NID = NID. 
 
 CONCATENATE VFL_CSKB-KOKRS VFL_SETLEAF-VALFROM INTO CSTEL. 
 
 VFL_HIER1-NNAME = CSTEL. 
 NID = NID + 1. 
 
 APPEND VFL_HIER1 TO VIT_HIER. 
 
 CLEAR: VFL_CSKB. 
 
 ENDLOOP. 
 
 CLEAR: VFL_SETLEAF, VFL_HIER1. 
 
ENDLOOP. 
 
CLEAR VIT_SETLEAF[]. 
 
ENDLOOP. 
 
 
LOOP AT VIT_HIER INTO VFL_HIER. 
 
NHID = VFL_HIER-HID. 
NVALC = VFL_HIER-VALC. 
 
CONCATENATE VFL_HIER-NID ';' VFL_HIER-IOBJ ';' '"' VFL_HIER-NNAME '"' 
 ';' ';' VFL_HIER-PID ';' ';' ';' 'N' ';' 
 '"' VFL_HIER-DESC '"' ';' '"' VFL_HIER-DESC '"' ';' 
 '"' VFL_HIER-DESC '"' INTO OUT. 
 
VFL_FINAL-OUT = OUT. 
APPEND VFL_FINAL TO VIT_FINAL. 
CLEAR VFL_FINAL. 
 
ENDLOOP. 
 
CALL FUNCTION 'GUI_DOWNLOAD' 
EXPORTING 
filename = 'hierarchy.csv' 
TABLES 
data_tab = VIT_FINAL 
EXCEPTIONS 
OTHERS = 1. 
 
Edited by: Bjorn Houben on Dec 28, 2009 2:07 PM
Edited by: Bjorn Houben on Dec 28, 2009 2:16 PM
Edited by: Bjorn Houben on Dec 28, 2009 2:16 PM

Cost Center and Cost Element Hierarchy and Actual Cost Center

In Bex - Right now I am displaying Cost Center and Cost Element hierarchy with 12 months of data. I want to display the actual Cost center number next to cost element hierarchy - Can I display in Bex?
Tried to with Structure creating formula variable for Cost Center using replacement path - didn't work. Can you please suggest me how i can achieve this?
The format should be
CostCenter H1 CostElement H1 CostCenter Jan Feb ...
Thanks in advance and appreciate for any help...

Let me explain it clearly and hope it is clear now...
Designed the report as like this - Cost Center Hierarchy by Cost Element Hierarchy for 12 months of data. But Business agian search in R/3 for actual cost center numbers based on above two hierarchy nodes.
I am trying to achieve this Bex instead of going back to R/3 - so that they can understand how the dollar amount is summed up on which major cost centers.
If I remove the hierarchy on Cost Center - it will display all the cost centers. They want to see the Cost center numbers based on CC and CE hierarchy node so that you are displaying only those cost centers. That's the reason I am trying to design the report with CC Hier, CE hier, Cost Center number and 12 months of data.
In my data model - have only one Cost Center, if i can create another ZCOSTCENTER same as 0COSTCENTER - May be I can achieve this. still looking for options with out changing the design.

New cost element hierarchy - how to extract

Hello,
User created new cost element hierarchy/cost element groups (KAH3).
I dont see this hierarchy in the list of available hiararchies of data source 0COSTELMNT_0102_HIER.
Shall it appear in the list automatically or I need to do custom extraction?
Thanks

Hello,
The problem is probably caused by the fact that only the highest node of the hierarchy is displayed as available for the
0COSTELMNT_0102_HIER datasource. This means that the cost element group which is displayed is not used in any other group. That is probably the reason why some of your groups are displayed as available and some of them not. You can check it in the transaction KAH3 in your OLTP system.
Select your cost element group and press the Where used button. On the next dialog box select just 'Groups' and choose ENTER. Then the groups are displayed that contain the respective group. The highest level group should be available also in BW system.
When you extract this group then you will see your group as a subnote. Please see the information SAP note 316976 on available hierarchies for CO InfoObjects incomplete.
Best Regards,
Des

Adding cost center on OKB9 with cost element company code with valuation ar

hi ,
can anybody help me out with the Adding cost center on OKB9 with cost element company code with valuation area configuration.
i have to do this configuration but do not know the detailed steps for that one.
Good points will be awarded.

Hi Prem
Select the 1 in column acct assignment details column then in the left side in detail per business area/valuation area enter your valuation area.
Thanks
Ashok

Cost Element Hierarchy extraction error

I am trying to extract cost element hierarchy from the ECC using standard extractor 0COSTELMNT_0102_HIER. It says 26 records sent and 0 received in the monitor and see the following error when I click error message button. I would appreciate if someone can help me to resolve this problem.
Error when updating Idocs in Business Information Warehouse
Diagnosis
Errors have been reported in Business Information Warehouse during IDoc update:
No status record was passed to ALE by the applicat
System Response
Some IDocs have error status.
Procedure
Check the IDocs in Business Information Warehouse . You do this using the extraction monitor.
Error handling:
How you resolve the errors depends on the error message you get.

My problem got solved.
I went to details tab in the monitor. Look for the IDoc error, select and right click and choose option that says something like 'manual update/correct' on the IDoc.
Rerun your extraction and it should work.
Ram.

Adding cost element to a particular hierarchy in RSH1 leads to shortdump.

Similar Messages

Maybe you are looking for