Adding custom 12 x 18 sheet

i have a printer that will accept up to 13 x 19 paper and i would like to print on 12 x 18.
does anyone know how i add a custom sheet such as this to Numbers?
also, am i correct in thinking that i do this within the Numbers interface as opposed to some printer control or printer driver for the whole printer and across the whole OS? coming from PC land and this is still a little tricky for me.
thanks.

Hi Jeff.
Very nice. Thank you. I am much obliged.
I have to admit I am still having a terrible time with the concept of drivers on the mac os and I can't figure out if this is in part due to Hewlett Packard totally selling me a bill of goods with the HP 8500 or what is going on. I mean, the /drivers/ for my HP printers are supposed to come with the Mac OS is that right? Drivers get updated when I update my OS, yes?
I mean - I have an HP 8500, and HP 1700 and now they were kind enough to send me a HP C410a - but for the life of me I don't quite understand how things are supposed to work overall.
In the past - my recollection is that I could set up a pulldown for 8 x 11 color, 8 x 11 greyscale, 8 x 11 color draft, 11 x17 and 12 x 18 sort of "favorites" - and then I could pulldown to these almost totally across software on the computer. I could be in any software and pulldown to one of these when I was printing to one or another device.
Can I /please/ ask you if you think that this is the way the Mac OS is /supposed/ to behave? And if so, am I correct in hearing that I should set up these "favorites" in PAGES and then expect them to show up everywhere else??
Thank you!!

Similar Messages

Adding custom fields to Embedded Search

Hi All,
I have read the post [here|How to add custom fields to Embedded Search; about adding custom fields to Embedded Search. I am looking to add Employee Subgroup for use in Talent Management (specifically the STVN SuccessionPlanning component) and wanted to know if anyone can expand on the instructions in the link to add this field.
It appears to be part of the HRTMC_PERSON search object connector already and while I've done some IMG configuration the field is showing in SuccessionPlanning, but not displaying any data.
Additionally, I'd be interested in any tips to add information that is not from PA0002 should it be required in the future.
Many thanks,
Luke

Hi Luke,
I am assuming here that your search request fields are based on HRTCM_CENTRALPERSON search template. To enable your search to work on employee subgroup please do the following
1) Check if the HRTMC_PERSON Template extracts the data from Infotype 0001 via SPRO node 'Define Search Models and Change Pointer' Extraction Class is 'CL_HRTMC_SEARCH_READ_PA_INFTY'.
2) Via ESH_COCKPIT, goto Template Modeler and select your custom Software Component and press Edit. Goto roadmap step 5 - Define Requests - where all search request fields are defined. Its using these fields Talent search works.
3) Select the search request e.g. 'SAP_TALENT_NAKISA', it would then show list searchable attributes in below table. Using 'Add' button select path for PERSK so that it can searched.
It would look like this once selected
OBJID(REL_CP_P)->HRTMC_REL_CP_P_209.REL_CP_P(REL_CP)->HRTMC_PERSON.OBJID->HRTMC_PERSON.ORG_ASSIGNMENT
4) In step SPRO 'Define Search Requests and Search Field Names' , define Employee subgroup field with AliasSearchField = PERSK since thats what is defined in roadmap step 5.
Hope it helps!
Regards,
Ricky Shah

Adding custom fields through SE51

Hi All!
This is with regards to adding custom fields through Se51 to standard screens.I had added custom field KNVV-ZZKVGR6 to the screen.
After drawing the text and I/O buttons.When I activate I am getting an syntax error saying Field KNVV-ZZKVGR6 is defined differently in screen (ABAP/4 field,Dictionary field).
What does this mean.
Also if i activate with a SAP standard field instead of the custom it is getting activated.
But for both the ways I could not able to see the output on the actual transaction.Also the new drawings which i am drawing are in brown color(different form the existing one)
Please advise.
regards
Praneeth

hi Praneeth,
what is the program name,screen number you are trying to modify..,and after appending the field ZZKVGR6 to KNVV , now go to table and choose menu Utilities->Data base Utility-> now click on Activate and Adjust the Data base, then try to add the field.
and are you adding the field from Dictionary (i.e you have option Get From Dictionary in that give KNVV table name it will list the fields, choose zzkvgr6 from it, and place it in your screen.)
the exit which you are adding should be appropriate one
or else you won't get the desired results. what is the exit..
Regards
vijay

"500 internal server error" after adding custom fields to Address page

I need to display custom fields on the "Addresses" and the "Personal Data" pages. For that, we added custom CI_INCLUDE fields in both PA0006 and PA0002 tables as per instructions below
https://www.sdn.sap.com/irj/scn/wiki?path=/display/profile/essPersonalInformationUIenhancementwithoutmodification&focusedCommentId=28278867
we also extended the Badi HRPAD00INFTYUI
custom fields show up OK in page "Personal Data". However when trying to browse to page "Addresses"
we get the following error:
"500 internal server error - com.sap.tc.webdynpro.progmodel.context.ContextException: MappedNodeInfo(DetailView.SelectedInfotype): unknown child node Area8 ".
"Area8" is one of the custom fields we added in PA0006 (Address infotype).
any idea what is wrong? maybe Badi HRPAD00INFTYUI cannot handle 2 infotypes in the same time?
T.

Hi Sasu,
Its clearly saying contect binding error. Have you mapped correctly from FcComponent to VcComponents.
FcCompoenets for Model logic.
Check the mappings correctly.
If it is complete custom or new field then there will be could of steps.
1) Reimport the model
2) map new field to FcComponent
3) Bind new Fields from Fc to Vc
Rgds
-SS

While adding custom field in urgent change-Create new field button in AET is not coming

Dear All,
we have requirement to add some custom fields in urgent change document. while adding custom fields using AET, create new field button is not coming.
Thanks in advance. points will be awarded.
Rahul

Hi Jignesh,
Thanks for your valueble inputs, it really helped me to understand the process.
I checked in Web UI configuration for urgent change document as you mentioned but still that button is not coming.
In transaction BSP_WD_CMPWB, i have created enh. set: Z_ENHANCEMENT_SET.
Can you tell what to selelect in application and page popup which comes after selecting Enhance component button. Actually i tried but i am not able to add new record in conf.
Thanks in advance.

CRM 7.0 / IS-U: adding custom fields to Business agreement for replication

Hello Experts!
We're working on replication of custom fields from IS-U to CRM 7.0.
Can you help me with clarification of my understanding of these questions..?
1) CRM/IS-U mapping tables for buag_main:
Business Agreement(BUAG_MAIN) is a BO in CRM that corresponds to CRM table CRMM_BUAG and to Contract account in IS-U table FKKVKP.
Table FKKVKP were enhanced with some z-fields,
so we are going to enhance corresponding CRM table CRMM_BUAG (or CRMM_BUAG_H) with that new fields..
But we see that these CRM and IS-U tables have far not the same field structures..
So, the question: Which crm and is-u tables i should look, enhance and replicate for Business agreement?
2) Access to Business agreement with possibility to add custom field:
I couldn't find in Web UI where i can directly edit profile of Business Agreement..
I've found just access to assignment block "Business agreement" on Account's profile overview page..(Role ServicePRO; Account details).
There I used AET to add custom field..but I faced with problem when the 1st popup appeared: there was no enhanced object "Business Agreement"..
Also in role "Utilities IC Agent" i've found "business agreement" profile but there I don't see buttons for adding custom fields..
So, the question is: Where I can access Business agreement profile to enhance it with custom fields for replication with IS-U?
3) CRM/IS-U data exchange functions:
I tend to use tcode CRMC_BUT_CALL_FU:
for CRM inbound event of BUAG object - FM CRM_BUAG_MWX_PROCESS_EXT_STRUC..(as template).
Question: Am I right that it fits my requirement to replicate custom fields from IS-U to CRM?
Please tell me if you need more information..
Looking forward to your answers.
Thank you a lot in advance!
Kind regards,
Evgenia

Hi Gobi,
Thank you for advice. But:
I've created fields not by using AET - I used documentation that Nicolas suggested me above.
I've enhanced tables and structures that were mentioned there with my z-fields for both sides (CRM and ERP).
Also I looked CRMC_BUT_CALL_FU for CRM Inbound BUAG_MAIN - corresponding standard FMs are marked for call.
Any ideas?
Thanks in advance.
BR,
Evgenia

Added custom screen in PO using BADI ME_GUI_PO_CUST and ME_PROCESS_PO_CUST

Hi All,
I have added custom screen with two z fields at item level using BADI ME_GUI_PO_CUST and ME_PROCESS_PO_CUST i can see my screen in tcodes ME21N , ME22N , ME23N but I am not able to save data.
and also screen is coming in change mode even in ME23N .
thanks.

Hi,
I have added two xfields at item level.
This is the code i have added in zimplementation ZME_GUI_PO_CUST .
IN Zimplementation ME_PROCESS_PO_CUST I have added code only in method FIELDSELECTION_ITEM . after doing this I can see only screens in ME21N, ME22N, ME23N but when enter data in zfields and trying to save it is giving me message no data has changed.
method IF_EX_ME_GUI_PO_CUST~SUBSCRIBE.
DATA: ls_subscriber LIKE LINE OF re_subscribers.
we want to add a customer subscreen on the item detail tab
CHECK im_application = 'PO'.
CHECK im_element = 'ITEM'.
each line in re_subscribers generates a subscreen. We add one subscreen in this example
CLEAR re_subscribers[].
the name is a unique identifier for the subscreen and defined in this class definition
ls_subscriber-name = subscreen1.
the dynpro number to use
ls_subscriber-dynpro = '0001'.
the program where the dynpro can be found
ls_subscriber-program = 'SAPLYMEPOBADIEX'.
each subscreen needs his own DDIC-Structure
ls_subscriber-struct_name = 'MEPO_BADI_STRUCT'.
a label can be defined
ls_subscriber-label = text-001.
the position within the tabstrib can be defined
ls_subscriber-position = 4.
the height of the screen can be defined here. Currently we suport two screen sizes:
value <= 7 a sevel line subscreen
value > 7 a 16 line subscreen
ls_subscriber-height = 7.
APPEND ls_subscriber TO re_subscribers.
ENDIF.
method IF_EX_ME_GUI_PO_CUST~TRANSPORT_FROM_MODEL.
DATA: l_item TYPE REF TO if_purchase_order_item_mm,
 ls_mepoitem TYPE mepoitem,
 ls_customer TYPE mepo_badi_exampl.
system asks to transport data from the business logic into the view
CASE im_name.
 WHEN subscreen1.
is it an item? im_model can be header or item.
 mmpur_dynamic_cast l_item im_model.
 CHECK NOT l_item IS INITIAL.
transport standard fields
 ls_mepoitem = l_item->get_data( ).
transport customer fields
 CALL FUNCTION 'YMEPOBADIEX_GET_DATA'
 EXPORTING
 im_ebeln = ls_mepoitem-ebeln
 im_ebelp = ls_mepoitem-ebelp
 IMPORTING
 ex_data = ls_customer.
store info for later use
 MOVE-CORRESPONDING ls_mepoitem TO dynp_data_pbo.
 MOVE ls_customer-badi_bsgru TO dynp_data_pbo-badi_bsgru.
 MOVE ls_customer-badi_afnam TO dynp_data_pbo-badi_afnam.
 WHEN OTHERS.
ENDCASE.
endif.
method IF_EX_ME_GUI_PO_CUST~TRANSPORT_TO_DYNP.
CASE im_name.
 WHEN subscreen1.
 CALL FUNCTION 'YMEPOBADIEX_PUSH'
 EXPORTING
 im_dynp_data = dynp_data_pbo.
 WHEN OTHERS.
ENDCASE.
ENDIF.
endmethod.
method IF_EX_ME_GUI_PO_CUST~TRANSPORT_FROM_DYNP.
CASE im_name.
 WHEN subscreen1.
 CALL FUNCTION 'YMEPOBADIEX_POP'
 IMPORTING
 ex_dynp_data = dynp_data_pai.
 IF dynp_data_pai NE dynp_data_pbo.
something has changed therefor we have to notify the framework
to transport data to the model
 re_changed = mmpur_yes.
 ENDIF.
 WHEN OTHERS.
ENDCASE.
ENDIF.
endmethod.
method IF_EX_ME_GUI_PO_CUST~TRANSPORT_TO_MODEL.
DATA: l_item TYPE REF TO if_purchase_order_item_mm,
 ls_mepoitem TYPE mepoitem,
 ls_customer TYPE mepo_badi_exampl.
data have to be transported to business logic
CASE im_name.
 WHEN subscreen1.
is it an item? im_model can be header or item.
 mmpur_dynamic_cast l_item im_model.
 CHECK NOT l_item IS INITIAL.
 ls_mepoitem = l_item->get_data( ).
standard fields changed?
 IF dynp_data_pbo-matkl NE dynp_data_pai-matkl OR
 dynp_data_pbo-plifz NE dynp_data_pai-plifz OR
 dynp_data_pbo-webaz NE dynp_data_pai-webaz.
update standard fields
 ls_mepoitem-matkl = dynp_data_pai-matkl.
 ls_mepoitem-plifz = dynp_data_pai-plifz.
 ls_mepoitem-webaz = dynp_data_pai-webaz.
 CALL METHOD l_item->set_data( ls_mepoitem ).
 ENDIF.
 CALL FUNCTION 'YMEPOBADIEX_GET_DATA'
 EXPORTING
 im_ebeln = ls_mepoitem-ebeln
 im_ebelp = ls_mepoitem-ebelp
 IMPORTING
 ex_data = ls_customer.
 ls_customer-badi_bsgru = dynp_data_pai-badi_bsgru.
 ls_customer-badi_afnam = dynp_data_pai-badi_afnam.
 CALL FUNCTION 'YMEPOBADIEX_SET_DATA'
 EXPORTING
 im_data = ls_customer.
 ENDIF.
 WHEN OTHERS.
ENDCASE.
ENDIF.
method IF_EX_ME_PROCESS_PO_CUST~FIELDSELECTION_ITEM.
DATA: l_persistent TYPE mmpur_bool.
CONSTANTS:
FIELD-SYMBOLS: <fs> LIKE LINE OF ch_fieldselection.
l_persistent = im_item->is_persistent( ).
*IF l_persistent EQ mmpur_yes.
READ TABLE ch_fieldselection ASSIGNING <fs> WITH TABLE KEY
 metafield = MMMFD_YYMAN_NUM."fd_cust_01.
IF sy-subrc IS INITIAL.
<fs>-fieldstatus = '*'. " Display <-- this one was as per the sample code given.
<fs>-fieldstatus = '+'. " Input <-- this i added to make the field mandatory.
ENDIF.
READ TABLE ch_fieldselection ASSIGNING <fs> WITH TABLE KEY
 metafield = MMMFD_YYMAN_DES."fd_cust_01.
IF sy-subrc IS INITIAL.
<fs>-fieldstatus = '*'. " Display <-- this one was as per the sample code given.
<fs>-fieldstatus = '+'. " Input <-- this i added to make the field mandatory.
ENDIF.
*ENDIF.
ENDIF.
endmethod.

Problem Adding Custom JSF Components to Oracle JDeveloper 10g (10.1.3) Prev

I'm having a problem on Adding Custom JSF Components to Oracle JDeveloper 10g (10.1.3) Preview (http://www.oracle.com/technology/products/jdev/101/collateral/101/adffaces/howto_customcomponents.html)
The step 1 of 5 isn't visible for me and I don't see the "Install from local file" option to select the adf-faces-bundle.zip from my file system. The OTN check for updates don't prove the ADF Faces...
What may I do?

And...
If "Check for Updates Wizard" is not launched, you can try to set LANG.
see: 10.1.3 Can't not launch Update Wizard in Japanese environment.
10.1.3 Can't not launch Update Wizard in Japanese environment.
Thanks.
Takuya Ono

Adding Custom fields to SRM Item Data tab & Account Assignment Tab

Hi Everyone,
We have got a small requirement to add 2 custom fields in SRM Shopping cart.
Need to add a input field, which should act just like Requisitioner in ECC. ( F4 help ).This will allow to create shopping cart on behalf of some one.
Need to add input field, which resembles Goods Recipient in ECC ( Free text)
After adding custom fields, how do i ensure that, it's mapped to right field in ECC.I spent much browsing SRM forum, but couldn't gather much information. I understood that, this involves configuration in SPRO.
Any information or help in any kind would be really helpful.
Thanks in advance.
Vishnu

Hi Vishnu,
Take look at this link.
Add custom field to SC and POWL
Thanks
Senthil

Problem in adding Custom Provider for Work Management Service

Hello,
I'm facing an issue in adding custom provider for work management service. As you are aware, Work management service is a Provider model and we
can integrate with other systems by adding custom providers. So with that confidence, i have started writing a connector as mentioned below.
Step - 1: Added new provider xml in the below path
"C:\Program Files\Common Files\Microsoft Shared\Web Server Extensions\15\CONFIG\WorkManagementService\Providers"
Provider Name: provider.bizagitasklist
Provider XML Content:
<Provider ProviderKey="DAA52AF3-A147-4086-8C0C-82D2F83A089D" OverrideProviderKey="" Assembly="adidas.TaskProvider, Version=1.0.0.0, Culture=neutral, PublicKeyToken=5d6f3e6be60a351b" > </Provider>
Step -2: Added a class which inherits "IWmaTaskProvider" and implemented the override methods.
public class BizAgiTaskListProvider : IWmaTaskProvider
public string LocalizedProviderName
get { return "BizAgiTaskListProvider"; }
public string ProviderName
get { return "BizAgiTaskListProvider"; }
public Microsoft.Office.Server.WorkManagement.CalloutInfo GetCalloutInfo(IWmaTaskContext context, string taskExternalKey, string locationExternalKey)
return null;
public DashboardExtensionInfo GetDashboardExtensionInfo(IWmaBasicProviderContext context)
return new DashboardExtensionInfo { ClassName = "SP.UI.SharePointExtension" };
public BulkEditResult HandleBulkEdits(IWmaTaskContext context, BulkEdit updates)
return null;
public TaskEditResult HandleTaskEdit(IWmaTaskContext context, BaseAggregatorToProviderTaskUpdate taskUpdate)
return null;
public void RefreshSingleTask(IWmaTaskRefreshContext context, string externalKey)
public void RefreshTasks(IWmaTaskRefreshContext context)
//context.WriteProviderCustomData(
Step – 3: Written a class to fetch the tasks from BizAgi System which has method to provide the task data.
But I’m not able to feed those tasks in the class written in Step – 2 as I’m able to find any method which will take Tasks as Input and I’m not
sure about the format of tasks.
I’m able to debug the provider, and the breakpoint hitting in only one method and two properties.
(LocalizedProviderName, ProviderName, GetDashboardExtensionInfo).
Can you please help me to proceed further in implementing the above solution?
Best Regards
Mahesh

Hi Mahesh,
Although the implementation of work management service application is based on the provider model, I reckon the current SP 2013 RTM does not support custom providers. Only SharePoint task lists, Project server and MS Exchange are supported for now.
Regards,
Yatin

Adding custom fields to Article Master (MM41/MM42)

Hi ,
I have a requirement of adding custom fields to Basic data of Article creation in MM41 . I appended the fields to
MARA table using Append structure . I followed the steps given in note 44410 . But i am unable to find an EXIT/BADI
/ENHANCEMENT to populate the values of custom fields which get triggered during MM41/MM42 .
But the Exit EXIT_SAPLMGMU_001 gets triggered only during MM01/MM02 . Kindly guide me to solve this .
Thanks and Regards,
S.Sivakumar

Hi,
Business Requirement:
As per the client Business critical requirements, additional fields are
required in the Article Master. This is because the existing fields in
the Article master are not adequate to capture the data.
We have referred the SAP Note 925424 (Table MAW1) and 44410 (MARA) for
this.
Based on the above note 44410, we have added fields in MARA table,
since Manufacturing
activities are envisaged in future instead of proceeding with 925424.
Whether, MAW1 (925424) also to be considered?
Since this is very critical requirement from client, we cannot avoid
and do not have any
alternate solution.
These fields will be used in reports and pricing in sales &
distribution.
Apart from this, are there any other SAP notes to be referred?
Is there any restrictions there in length for fields to be used in MARA table .
By referring note 44410 , i added 20 fields in MARA table, in which some 4 fields are more than 40 characters .
All custom fields are updated in MM41 and MM42 .
Shall i proceed by this approach .Kindly guide me on this .
Thanks and Regards,
S.Sivakumar

Adding Custom Fields to FAGLFLEXP Table

Hello,
We have a requirement to update WBS Element for Planning related Data. So have added custom field(WBS Element) in structure CI_FAGLFLEX04.
The field is visible when I open FAGLFLEXP table, but when I post data The custom field (WBS Element) is not being updated. Could you please let me know the process to update this field?
Thank you in advance.

Hi.
The procedure isn't so simple. There are several posts on the subject SCN. I suggest research before you start developing.
Start here:
https://help.sap.com/saphelp_nw04s/helpdata/en/cf/21eb61446011d189700000e8322d00/content.htm
However, the most important is: a) Is it really necessary to change the standard? b) There could be a Z table containing the new information and referencing FAGLFLEXP? c) What is the transaction that will keep the data? It has Exit´s for what you need?
As Vadamalai said below,
Actually your approach may be wrong, first as an ABAPer should ask to functional team, which transaction and where to insert the fields, it could be header or item level(I am saying example)
Based on tcode, you need to enhance the table level as well as the screen exit/BADI we need to pass screen to internal programming structure. the structure type will be table type of FAGLFLEXP.
Regards.
Douglas

Adding custom fields to DB table

Hi,
I added custom fields in std DB table using CI_* , activated table using SE14. Now I want to remove the added custom fields , I deleted the CI_* using SE11. It still appears in DB table, I mean I dont expect to disappear from DB table, when I double click it still takes to structure screen. I deleted include from SE80 also selecting Package, activated and adjusted DB table from SE14 after deletion, but it still appears and when I check the attributes it shows the same package , how to reset the CI_* , bottom line ,I want to make DB table normal as before, because of that I am getting dumps when I execute std DB table related T codes.
It should be done in easy way but not able to get breakthrough.
Please let me know your suggestions.
Thanks

Hi Sai,
Try to assign the CI_* structure to $temp,i.e as local object and then activate it first.
After that, try deleting the local object and adjust the table using SE14.
If still it does not work, ask your BASIS consultant to do an "Alter table".
May be that works!
Thanks & Regards,
Anshumita.

Adding custom fields to table view assignment block

Hi All,
I want to add two news fields to 'Service Contract Item Level' in 'Object List' assignment block. How can i add these two custom fields to table view assignment block using AET. I have tried to add new fields using AET but there is no business object supports to my requirement.
Thanks & Regards
Nitish

Hi Nitish,
As naveen sadid use Cutomer_i object . I guess it will be more appropriate.
And following link will be helpful for AET creation.
CRM 7.0 How to --4 Adding Custom Fields With The New Application Enhancement Tool (AET)
Regards
Loks

MS CRM 2015 Adding Custom RIbbon button in dashboard and Changing Colors

Hi,
I am Looking for customization in MS Dynamics CRM 2015 and want to Add Custom Ribbon button in dashboard and Changing Colors of that ribbon using customization.xml i am new to crm 2015 and only know how to import export solutions.
Regards
Irfan

Hello Irfan,
For adding a custom button please refer this blog
https://community.dynamics.com/crm/b/aeonnexuscrm/archive/2014/10/21/ms-crm-2013-adding-custom-ribbon-button-in-dashboard.aspx
And for changing colors in Chart
https://crmchartguy.wordpress.com/2012/08/23/palette-custom-colors-in-charts/
Hope this helps!
Regards, Abhishek Bakshi If you find this post helpful then please Vote as Helpful and Mark As Answer. Check my blog on https://mydynamicscrmblog.wordpress.com/

Adding custom 12 x 18 sheet

Similar Messages

Maybe you are looking for