Adding Custom Fields - Application Enhancement Tool - SAP Library

To add a comment, please log in or register on the top of this page and choose Reply. Please write your comment in English.
You can also go back to the SAP help page.

Hi,
AET(Application Enhancement Tool) is able to create custom field for almost all CRM application.
Please go to transaction AXTREG to see which "Business Object" is enhanceable.
AET is also able to create custom field for ERP on CRM system. It will enhance the BOL structure which is shown in ERP_H component. However, you need to create the field on the ERP system as well. This is not supported by AET.
Regards,
Steve

Similar Messages

Deep Table - Application Enhancement Tool - SAP Library

To add a comment, please log in or register on the top of this page and choose Reply. Please write your comment in English.
You can also go back to the SAP help page.

Hi Sasha,
We have a very similar requirement to add custom fields in CRM and map it to existing fields in ECC. Can you please let me know the steps whcih you followed in ECC for this ? I have added the fields in CRM side using AET with r/3 adapter flag. But I am trying to figure out which structures need to be enhanced in ECC side.
Any help on this is much appreciated.
Regards,
Manas,

Adding Custom fields to standard SAP-EBP application

Hi,
A functionality requires some custom fields to be added to the standard SAP-SRM EBP ( Manage business partners) application.
If I copy the whole BBP_VENDOR_CREATE program into a Z-program, and the BBPMAININT internet service to a Z-application, then would it be feasible??
Which is the best way to add custom fields in a SAP standard EBP application--in the 'Manage business partners' section.
Regards,
Goutam

Hi
I don't think it's easily possible to add custom fields to the existing transaction - BBPMAININT.
For adding customer fields you can refer the SAP OSS not - 672960, but I don't think it will be of much help here.
Since SAP has not upgraded this transaction - BBPMAININT for a quite long time, you need to do all the logic and validation from your end.
Better to go for you own Z (custom program) and make your logic accordingly.
Regards
- Atul

How to eliminate a field created by Application Enhancement Tool

Hello All,
I´ve created some fields with Application Enhancement Tool and now i need to delete one of then. When i select at webclient to delete it, system says that i need to do manual steps to eliminate the field. Can anybody tell me what are this manual steps?
Another thing, is there any way to update entries of combo fields created by AET without being at webclient?
Thanks in advance!
Rafael Morcelli

Hi,
could you send me the text which describe the manual step?
As far as I know the only manual step that you have to do after deleting the AET field is remove the field from the UI Configuration.
Updating the entries of the entries of the combo field(dropdown list box) can be done via AET.
Technically, you can also directly edit the generated Domain. However, I would not recommend you to do this.
It is better, if you update the entries via AET.
Regards,
Steve

Adding custom fields to table view assignment block

Hi All,
I want to add two news fields to 'Service Contract Item Level' in 'Object List' assignment block. How can i add these two custom fields to table view assignment block using AET. I have tried to add new fields using AET but there is no business object supports to my requirement.
Thanks & Regards
Nitish

Hi Nitish,
As naveen sadid use Cutomer_i object . I guess it will be more appropriate.
And following link will be helpful for AET creation.
CRM 7.0 How to --4 Adding Custom Fields With The New Application Enhancement Tool (AET)
Regards
Loks

Application Enhancement Tool: 'R/3 Adapter' checkbox inactive

Dear colleagues,
We are working with CRM release 7.0 SP5.
We are trying to establish replication of the data from ERP field KNA1-KDKG1 into a newly created custom Z-field appended in CRM to the table BUT000 using Application Enhancement Tool (AET).
While creating a new Z-field with AET, on the dialog window 'Field Details' there is a checkbox called 'R/3 Adapter'. We understand that in order to get all necessary Middleware objects automatically generated for us, we need to activate this checkbox. However the checkbox is inactive (and unchecked).
What system settings define whether the checkbox 'R/3 Adapter' is active and therefore can be checked? Is the functionality behind this checkbox really what we expect: enabling replication of the data from the newly created CRM Z-field between ERP and CRM?
Many thanks in advance!
Sasha

Hi Sasha,
We have a very similar requirement to add custom fields in CRM and map it to existing fields in ECC. Can you please let me know the steps whcih you followed in ECC for this ? I have added the fields in CRM side using AET with r/3 adapter flag. But I am trying to figure out which structures need to be enhanced in ECC side.
Any help on this is much appreciated.
Regards,
Manas,

While adding custom field in urgent change-Create new field button in AET is not coming

Dear All,
we have requirement to add some custom fields in urgent change document. while adding custom fields using AET, create new field button is not coming.
Thanks in advance. points will be awarded.
Rahul

Hi Jignesh,
Thanks for your valueble inputs, it really helped me to understand the process.
I checked in Web UI configuration for urgent change document as you mentioned but still that button is not coming.
In transaction BSP_WD_CMPWB, i have created enh. set: Z_ENHANCEMENT_SET.
Can you tell what to selelect in application and page popup which comes after selecting Enhance component button. Actually i tried but i am not able to add new record in conf.
Thanks in advance.

Adding custom fields to Article Master (MM41/MM42)

Hi ,
I have a requirement of adding custom fields to Basic data of Article creation in MM41 . I appended the fields to
MARA table using Append structure . I followed the steps given in note 44410 . But i am unable to find an EXIT/BADI
/ENHANCEMENT to populate the values of custom fields which get triggered during MM41/MM42 .
But the Exit EXIT_SAPLMGMU_001 gets triggered only during MM01/MM02 . Kindly guide me to solve this .
Thanks and Regards,
S.Sivakumar

Hi,
Business Requirement:
As per the client Business critical requirements, additional fields are
required in the Article Master. This is because the existing fields in
the Article master are not adequate to capture the data.
We have referred the SAP Note 925424 (Table MAW1) and 44410 (MARA) for
this.
Based on the above note 44410, we have added fields in MARA table,
since Manufacturing
activities are envisaged in future instead of proceeding with 925424.
Whether, MAW1 (925424) also to be considered?
Since this is very critical requirement from client, we cannot avoid
and do not have any
alternate solution.
These fields will be used in reports and pricing in sales &
distribution.
Apart from this, are there any other SAP notes to be referred?
Is there any restrictions there in length for fields to be used in MARA table .
By referring note 44410 , i added 20 fields in MARA table, in which some 4 fields are more than 40 characters .
All custom fields are updated in MM41 and MM42 .
Shall i proceed by this approach .Kindly guide me on this .
Thanks and Regards,
S.Sivakumar

Adding Custom Fields to FAGLFLEXP Table

Hello,
We have a requirement to update WBS Element for Planning related Data. So have added custom field(WBS Element) in structure CI_FAGLFLEX04.
The field is visible when I open FAGLFLEXP table, but when I post data The custom field (WBS Element) is not being updated. Could you please let me know the process to update this field?
Thank you in advance.

Hi.
The procedure isn't so simple. There are several posts on the subject SCN. I suggest research before you start developing.
Start here:
https://help.sap.com/saphelp_nw04s/helpdata/en/cf/21eb61446011d189700000e8322d00/content.htm
However, the most important is: a) Is it really necessary to change the standard? b) There could be a Z table containing the new information and referencing FAGLFLEXP? c) What is the transaction that will keep the data? It has Exit´s for what you need?
As Vadamalai said below,
Actually your approach may be wrong, first as an ABAPer should ask to functional team, which transaction and where to insert the fields, it could be header or item level(I am saying example)
Based on tcode, you need to enhance the table level as well as the screen exit/BADI we need to pass screen to internal programming structure. the structure type will be table type of FAGLFLEXP.
Regards.
Douglas

Adding Custom Fields to XD99, XK99

Hi,
I have a requirement to add custom fields to Customer and Vendor master transaction which are mass maintained.
XD99 and XK99 are the transaction codes. I found notes on adding custom fields to mass maintain MM17, however did not find any solution as of now to add custom fields to XD99 and XK99.
If anyone has worked on it, kindly provide me details if there is any Badi/User exit/Enhancement point to achieve this.
Regards,
Sneha Soni.

This works well with standard fields, but check [Note 216596 - Include additional fields in mass maintenance|https://service.sap.com/sap/support/notes/216596] and [Note 414020 - MASS: Customer fields are not mass-maintainable|https://service.sap.com/sap/support/notes/414020]
Regards,
Raymond

Adding custom fields to shopping cart in SRM 7.0

Hi My dear Experts,
I am having big doubt also a lot of confussion as per my understanding regarding adding custom fields to SC.
I believe,
i) It can be achieved by configuration in spro with respect to Meta data frame.
i,e Configure field control->configure control for fields on Header/Item level
after that
configure customer fields->Define cistomer fields on Header/Item level.
ii) I also doubt fields can be added through Webdynpro enhancement of standard component.
Pls clarify my doubt with little detail which is the best way to achieve my requirement ??
Is Webdynpro Enhancement really needed ??

Hi ,
   Example for Adding fields in SC accounting Tab ...follow the below example
1. Add custom field ZZTESTACCT in   structure   INCL_EEW_PD_ACC_CSF by using append structure.
2. Spro ->Supplier Relationship Management u2192 SRM Server u2192 Cross application basic settings u2192 Extensions and field controls (personalization) u2192 Configure field control ->Configure Control for Fields of Substructures
then click on "Metadata for Fields of Substructures and Table-Like Enhancements"
add the below entry
Bus. Object Set Type : 31
Structure Field Name : ZZTESTACCT
Bus. Object Type       : BUS2121
Set Level                    : Item
Field Visible : Check box should be checked
Field Enable : check box should be checked
if you create the above entry then you can see ZZTESTACCT field in the accounting tab.
Second point :
WD_BADI_DOMODIFYVIEW is a Badi you can implement this badi for the WD component and View to handle the UI elements.
regards,
Devi

Adding custom fields to FD32

Hi All,
I need to add 4 new fields to "Status" screen of FD32 transaction. I cannot use the already existing standard fields so I need to add custom fields. I have searched the forum and found the following enhancement and BADI :
RFDRRANZ
FI_DUZI_ROUND_CML
I tried to implement them but did not achieve the results that I wanted.
There are so many forums on this topic but none of them had an actual solution.
Did any had success adding custom fields to FD32? If yes, could you please let me know the solution.
Thank You,
Sonali.

Hi,
Business Requirement:
As per the client Business critical requirements, additional fields are
required in the Article Master. This is because the existing fields in
the Article master are not adequate to capture the data.
We have referred the SAP Note 925424 (Table MAW1) and 44410 (MARA) for
this.
Based on the above note 44410, we have added fields in MARA table,
since Manufacturing
activities are envisaged in future instead of proceeding with 925424.
Whether, MAW1 (925424) also to be considered?
Since this is very critical requirement from client, we cannot avoid
and do not have any
alternate solution.
These fields will be used in reports and pricing in sales &
distribution.
Apart from this, are there any other SAP notes to be referred?
Is there any restrictions there in length for fields to be used in MARA table .
By referring note 44410 , i added 20 fields in MARA table, in which some 4 fields are more than 40 characters .
All custom fields are updated in MM41 and MM42 .
Shall i proceed by this approach .Kindly guide me on this .
Thanks and Regards,
S.Sivakumar

Screen Exit for adding custom fields in Additional Data tab in ME21N

I need a screen exit or whatever other method for adding custom fields to the additional data tab at header level.
I also need a similar exit for adding a filed at item level.
Thanks in advance
Martin

Hello,
1st find badi or exit and then create screen ...and assign the screen group and screen no for that implementation....some steps i can give u i did with SPRO tcode....
please check it for VA02
SPRO u2013 SAP Reference IMG --- Logistics General --- Basic partner u2013 customers -- Control u2013 Adaption of customers own masters data element u2013 prepare modification of customer free enhancement of customer master record
1)Screen group                                  description
        zs                                           creating badi      --- (save)
       click on (label tab pages) u2013 new entries
       number u2013 10 , function code u2013 zs10 , description u2013 func ---(save) u2013(back)
2)select (FM_CUSTOMER_ADD) u2013 copy
     Implementation name u2013 ZAS
     (desc u2013 impl for cust) u2013 (save)
    interfaceu2014(check_add_on_active) double click on it
3)the above screen appear -- write the code in it u2013 (save) --- (activate) u2013 (back) u2013 (save)
     -- (activate) u2013 (back)
   Business adds in customer sub screens
4)select (FM_CUSTOMER_ADD) u2013 copy
     Implementation name u2013 ZAS1
     (description -- cust) u2013 in attribute u2013 (give screen group name)
5)go to interfaces (GET_TAXI_SCREEN) double click on it
   (save) --- (activate)
6)(SAVE) --
    Goto SE38 -- CREATE PROGRAM WITH NAME (ZQW) type module pool
     Goto SE51 -- Prog : ZQW
       Screen : 200 (Create)
      Goto layout u2013 design the screen
7)save u2013 activate
   then goto transaction : va02
For User Exit's
goto to tcode->status->program name->double click on that,
then goto to-> attribute take the package name and
Goto SMOD tcode ->Utilities->give the package name and F8
then a list of exits will display for that tcode as well as that package.
u can check the table MODSAP
u can check the table MODACT
For BADI's,
1)goto to tcode SE24 give the CL_EXITHANDLER and display and then double click on the GET_INSTANCE
keep Break point at this location 'call method cl_exithandler=>get_class_name_by_interface'
then the tcode it will trigger there and we can debugg there we can find badi'for that tcode and then remove the break point.
2)Goto to tcode->status->program name->double click on that program will display's
then press crtl+F then cl_exithandler
Thank u ,
santhosh

Adding custom fields through SE51

Hi All!
This is with regards to adding custom fields through Se51 to standard screens.I had added custom field KNVV-ZZKVGR6 to the screen.
After drawing the text and I/O buttons.When I activate I am getting an syntax error saying Field KNVV-ZZKVGR6 is defined differently in screen (ABAP/4 field,Dictionary field).
What does this mean.
Also if i activate with a SAP standard field instead of the custom it is getting activated.
But for both the ways I could not able to see the output on the actual transaction.Also the new drawings which i am drawing are in brown color(different form the existing one)
Please advise.
regards
Praneeth

hi Praneeth,
what is the program name,screen number you are trying to modify..,and after appending the field ZZKVGR6 to KNVV , now go to table and choose menu Utilities->Data base Utility-> now click on Activate and Adjust the Data base, then try to add the field.
and are you adding the field from Dictionary (i.e you have option Get From Dictionary in that give KNVV table name it will list the fields, choose zzkvgr6 from it, and place it in your screen.)
the exit which you are adding should be appropriate one
or else you won't get the desired results. what is the exit..
Regards
vijay

CRM 7.0 / IS-U: adding custom fields to Business agreement for replication

Hello Experts!
We're working on replication of custom fields from IS-U to CRM 7.0.
Can you help me with clarification of my understanding of these questions..?
1) CRM/IS-U mapping tables for buag_main:
Business Agreement(BUAG_MAIN) is a BO in CRM that corresponds to CRM table CRMM_BUAG and to Contract account in IS-U table FKKVKP.
Table FKKVKP were enhanced with some z-fields,
so we are going to enhance corresponding CRM table CRMM_BUAG (or CRMM_BUAG_H) with that new fields..
But we see that these CRM and IS-U tables have far not the same field structures..
So, the question: Which crm and is-u tables i should look, enhance and replicate for Business agreement?
2) Access to Business agreement with possibility to add custom field:
I couldn't find in Web UI where i can directly edit profile of Business Agreement..
I've found just access to assignment block "Business agreement" on Account's profile overview page..(Role ServicePRO; Account details).
There I used AET to add custom field..but I faced with problem when the 1st popup appeared: there was no enhanced object "Business Agreement"..
Also in role "Utilities IC Agent" i've found "business agreement" profile but there I don't see buttons for adding custom fields..
So, the question is: Where I can access Business agreement profile to enhance it with custom fields for replication with IS-U?
3) CRM/IS-U data exchange functions:
I tend to use tcode CRMC_BUT_CALL_FU:
for CRM inbound event of BUAG object - FM CRM_BUAG_MWX_PROCESS_EXT_STRUC..(as template).
Question: Am I right that it fits my requirement to replicate custom fields from IS-U to CRM?
Please tell me if you need more information..
Looking forward to your answers.
Thank you a lot in advance!
Kind regards,
Evgenia

Hi Gobi,
Thank you for advice. But:
I've created fields not by using AET - I used documentation that Nicolas suggested me above.
I've enhanced tables and structures that were mentioned there with my z-fields for both sides (CRM and ERP).
Also I looked CRMC_BUT_CALL_FU for CRM Inbound BUAG_MAIN - corresponding standard FMs are marked for call.
Any ideas?
Thanks in advance.
BR,
Evgenia

Adding Custom Fields - Application Enhancement Tool - SAP Library

Similar Messages

Maybe you are looking for