Adding custom fields in table control of infotype 0591

Dear Experts,
My requirement is to add custom fields x y z in the Table contol of the standard infotype 0591 (Nominations) screen in PA30 tcode.
Is it possible to add the fields in table control after the fields share,guardian's address, without using access key.
if so, help me to know the procedure.
Please suggest.
Warm Regards
Sinde.

hi..
a thread already exists with the same Subject.. pls check if it helps u....

Similar Messages

Adding fields in table control of infotype 0591

i want to add a column in table control of infotype 0591. i need to add age for every nominee.
i cant edit standard sap mp prog. so i thouhgt of copying it into zprogram, and now i have to assign it to that standard infotype so that this infotype will trigger my zmp program.
any suggestions on this?

hi..
a thread already exists with the same Subject.. pls check if it helps u....

Adding custom fields in table control of PO

Hi Everyone,
I have a requirement which i need to display the custom fields in the Table Control(Item Overview) of PO. Since our Version is 4.6C there is no badi's avilable to do the changes. Please let me know how can we solve this problem.
Mentors: Forgive me if it is repeated Post...
Edited by: subas Bose on Feb 5, 2010 12:10 AM

Hi,
Search for user exit...either screen or field exit..this will solve your problem.
Small help on how to find a exit;
1. find out the package
2. go to se84 with the help of package in the cutom exit tab look for all the exit.
3.put the brek point and tack where you can get the solution.
Pooja

To add a custom field in table control in transaction me21n and me22n

Hi Guru's,
I have a requirement to add a field in the table control at the time of creation of PO (ME21N). I enhansed the structure MEPO1211, but it is not appearing in the transaction. What should i do in order to bring that field in table control.
I implemented badis ME_GUI_PO_CUST and ME_PROCESS_PO_CUST by seeing some forum results.But i didnt get how to implement...
Please help me in this regard how to follow the steps and if possible please provide a sample code.
Thanks & Regards,
R.P.Sastry

hi,
Suppose in the there are three tabs BADI customer1, BADI customer2 and BADI customer3 at item level.
Say:
On BADI customer1 there are three fields FIELD1, FIELD2 and FIELD3.
On BADI customer2 there are two fields FIELD4 and FIELD5.
On BADI customer3 there are three fields FIELD6, FIELD7 and FIELD8.
Then the fields have to be added to EKPO (or requisite custom table as the need may be) and also fields are also to be added to custom structures.
Create a Structure ZSTRUCTURE1 which will contain the three fields FIELD1, FIELD2 and FIELD3.
Create another Structure ZSTRUCTURE2 which will contain the two fields FIELD4 and FIELD5.
Create another Structure ZSTRUCTURE2 which will contain the three fields FIELD6, FIELD7 and FIELD8.
The Structure STRUCTURE1 has to be passed for tab BADI customer1, the Structure STRUCTURE2 has to be passed for tab BADI customer2 and the Structure STRUCTURE3 has to be passed for tab BADI customer3.
Each custom tab/screen should have its own structure to handle the screen fields, but the screen field data has to be transfered to and from EKPO (or requisite custom table as the need may be) for database update/retrieve.
Hope this helps.
Regards,
Ritesh

Adding custom fields to table view assignment block

Hi All,
I want to add two news fields to 'Service Contract Item Level' in 'Object List' assignment block. How can i add these two custom fields to table view assignment block using AET. I have tried to add new fields using AET but there is no business object supports to my requirement.
Thanks & Regards
Nitish

Hi Nitish,
As naveen sadid use Cutomer_i object . I guess it will be more appropriate.
And following link will be helpful for AET creation.
CRM 7.0 How to --4 Adding Custom Fields With The New Application Enhancement Tool (AET)
Regards
Loks

Adding New Field in table control

Hi all,
I am going to add one new field in existing table control ,which already contains nearly 20 fields, so my field should be21st field,
here when I am going to add new field , I need to add the field from work are from the same program. So , I am selecting the option Get from Program, here I am getting the error the field does not exist in the generated version of the program.
Regards,
Siddivinesh Jogu

Hi,
I think you forgot to activate the program after creating the new field in the internalt able so first ensure the program is properly activated and then try the same.
Regards,
Himanshu

Adding extra fields to Table Control?

Hi Experts,
Here I hv a table control, with 5 fields, 1,2,3,4,5.
So, I need to add extra 3 fileds to the above said existing table control i.e.
6th field in between the 3 & 4,
7th field in between the 4 & 5,
8th field in the last i.e. after 5th,
I tried with Table Control Wizard, but not succeeded. So, pls, mention the steps to b followed to achieve this?
ThanQ.<b></b>
Message was edited by:
Sridhar

Hi,
Go to SE51
Give the program and screen number..
In the menu..choose..utilities -> settings..
Uncheck the graphical painter check box..press enter..
Choose the layout radion button..
Press change..
Double click on the table control..
THen press the CTRL Elements button..
In the popup...insert (+ button) to place the input field
THanks,
Naren

Adding dinamic fields into table control..

hi friends,
i wan to knw , is it possible to add fields dynamically in table control? actually the requirement is like, it is not fixed how many fields will be their in table control, it may change depending upon date. so if u knw, please help me out....
good points will be awarded to helpful answer.....
Thanks,
Brij

HI,
at the design time of the screen make all possible columns or fields in the table control,make sure you are having all the fileds in the itab.
now go to the pbo of the screen.
inside the loop endloop of table control write loop at screen .
inside this loop for all the fields base dupon condition you dont want to appear make screen-invisible = '1'.
modify screen.
hope this solves your query...
thanks
vivekanand

In T-Code: MIRO ; how to add custom fields in Table Control

In MIRO
in PO Reference tabstip i want to add 2 custom fields ( say PO segment Invoice number and vechecle names i have to populate ).
How to do dis ,
any BADIs or any EXITS ????
<REMOVED BY MODERATOR - REQUEST OR OFFER POINTS ARE FORBIDDEN>
Regards,
Ramesh.
Edited by: Alvaro Tejada Galindo on Dec 29, 2009 11:24 AM

ok

Adding field to Table Control

Hi Folks,
     I have a requirement of adding a field in Table control of Standard SAP transaction also updating the same in standard SAP database table.
     The field is also not existing in the table, it is also added to the table using Append Structure.
    Will this be possible using some Screen Exit?
Thanks in Advance.
Punit

Hi Poorna,
   Thanks for the reply.
   I have to add field to the txn QM02. User will specify the value for the custom field in this txn and the same should be updated in the database table.
   The field is not a std SAP field, it is added to the table using append structure.
Thanks,
Punit

Adding field to Table Control using screen exit

Hi Folks,
I have a requirement of adding a field in Table control of Standard SAP transaction also updating the same in standard SAP database table.
The field is also not existing in the table, it is also added to the table using Append Structure.
Will this be possible using some Screen Exit?
Thanks in Advance.
Punit

Hi Punit,
There are various screen user exits(QQMA0001,QQMA0008,QQMA0010,
QQMA0011,QQMA0012) available for this transaction but all are related to adding a subscreen.So, I am not very sure whether we can modify a table control for this transaction. So, If possible if u r requirement still can be acheived with creation of a subscreen then it would do only if the exits which were mentioned above belongs to u r main screen..
Regards,
Swaroop

Adding Custom Fields to FAGLFLEXP Table

Hello,
We have a requirement to update WBS Element for Planning related Data. So have added custom field(WBS Element) in structure CI_FAGLFLEX04.
The field is visible when I open FAGLFLEXP table, but when I post data The custom field (WBS Element) is not being updated. Could you please let me know the process to update this field?
Thank you in advance.

Hi.
The procedure isn't so simple. There are several posts on the subject SCN. I suggest research before you start developing.
Start here:
https://help.sap.com/saphelp_nw04s/helpdata/en/cf/21eb61446011d189700000e8322d00/content.htm
However, the most important is: a) Is it really necessary to change the standard? b) There could be a Z table containing the new information and referencing FAGLFLEXP? c) What is the transaction that will keep the data? It has Exit´s for what you need?
As Vadamalai said below,
Actually your approach may be wrong, first as an ABAPer should ask to functional team, which transaction and where to insert the fields, it could be header or item level(I am saying example)
Based on tcode, you need to enhance the table level as well as the screen exit/BADI we need to pass screen to internal programming structure. the structure type will be table type of FAGLFLEXP.
Regards.
Douglas

Adding custom fields to DB table

Hi,
I added custom fields in std DB table using CI_* , activated table using SE14. Now I want to remove the added custom fields , I deleted the CI_* using SE11. It still appears in DB table, I mean I dont expect to disappear from DB table, when I double click it still takes to structure screen. I deleted include from SE80 also selecting Package, activated and adjusted DB table from SE14 after deletion, but it still appears and when I check the attributes it shows the same package , how to reset the CI_* , bottom line ,I want to make DB table normal as before, because of that I am getting dumps when I execute std DB table related T codes.
It should be done in easy way but not able to get breakthrough.
Please let me know your suggestions.
Thanks

Hi Sai,
Try to assign the CI_* structure to $temp,i.e as local object and then activate it first.
After that, try deleting the local object and adjust the table using SE14.
If still it does not work, ask your BASIS consultant to do an "Alter table".
May be that works!
Thanks & Regards,
Anshumita.

How make display only the amount field in table control(infotype 0008)

Dear Freinds,
have to make display only the amount field (Q0008-bet01) on table control in infotype 0008 , could you tell me how to make it display only.
i have tried the below coding it is not working in PBO & PAI of the user exit
ZXPADU01 and ZXPADU02. For the table control is there any othe method??
       loop at screen.
           screen-name = 'WA_P0008-BET01'.
          screen-input = 0.
          screen-output = 1.
          modify screen.
      endloop.
i have tried like this as well
       loop at screen.
           screen-name = 'Q0008-BET01'.
          screen-input = 0.
          screen-output = 1.
          modify screen.
      endloop.
in the both the above methods it is not working. Could any one plese suggest me how to make display only the amount field in infotype 0008.
regards
syamla

Dear Freinds,
have to make display only the amount field (Q0008-bet01) on table control in infotype 0008 , could you tell me how to make it display only.
i have tried the below coding it is not working in PBO & PAI of the user exit
ZXPADU01 and ZXPADU02. For the table control is there any othe method??
       loop at screen.
           screen-name = 'WA_P0008-BET01'.
          screen-input = 0.
          screen-output = 1.
          modify screen.
      endloop.
i have tried like this as well
       loop at screen.
           screen-name = 'Q0008-BET01'.
          screen-input = 0.
          screen-output = 1.
          modify screen.
      endloop.
in the both the above methods it is not working. Could any one plese suggest me how to make display only the amount field in infotype 0008.
regards
syamla

Adding Custom Fields to BSEG and BKPF Tables

Hi All,
My customer would like to add around 5 fields to BKPF table and 6-7 fields to BSEG table. Can you all suggest me whether it would be a good idea to add any custom field to these tables ? I would like to mention that standard fields available in these tables will not be used for the requirements of the customer and he is insisting on adding custom fields. I need your expert advice on this matter.
Regards,
Rohit

Hi Friend,
Please do not add any custom fields in those tables.
These two tables are pillar of accounting entries in SAP, if you want to push them then it is OK, otherwise find some other way.
Regards
Krishnendu

Adding custom fields in table control of infotype 0591

Similar Messages

Maybe you are looking for