Adding custom MARC fields to MASS for updating
We have a requirement to add custom fields to MARC which was done easily. Now we'd like to be able to update these fields via MM17 (MASS) but the fields don't appear. What do we need to do to allow custom fields to be updated via MASS?
Thanks,
-=Rob=-
Dear Customer,
you should check note 576160 for furher information.
You have to implement a BAdI (from mass maintenance) and a Customer Exit (from Material)
mit freundlichen Grüßen/ yours sincerely
Marcus Wagler
SAP AG
Installed Maintenance Support Germany
Similar Messages
-
Adding custom (z) fields to assignment blocks...
We are running SAP CRM 7.0. We are using the opportunity module as well as "Create Follow Up" (Sales Order / Quotation) so that you have a one to many relationship (1 opportunity may contain many sales orders). I have 2 custom fields inside the Sales Cycle (Quotation) module "Actual Sales Order Value" and "Current Points".
What I am trying to do is take these 2 custom fields and add them to the assignment block called "Linked Transactions" in the Opportunities module. But when I look at all the available fields for this assignment block these 2 custom fields are nt available.
I do not see any way of adding these 2 fields to this assignment block. The only thing I see is "Create NEw Field". But I do not want to create a new field I just want to reference 2 fields from the Sales Cycle module inside of this assignment block.
Does anyone knowif it is possible to add 2 custom created fields that are i the Sales cycle module to add them to the opportunities assignment block that is called linked transactions ?
Thanks,
JonDuplicate thread.
Re: Add custom fields to assignment block
Please close.
Rg,
Harshit -
Adding a comment field in block for quality reasons subscreen of XK05?
Hi Experts,
I have requirement to add a comment field in block for quality reasons subscreen.
I didn't find any BADI for this requirement.
Kindly any one advise is it possible to add this comment field in XK05.
Regards,
AnushaHi Raymond,
Thank you for the reply. As per the note some one already implemented the Screen Enhancement with 2 custom views. I need to add the field in any one of existing custom view. So for this I have created a Subscreen in copied function group of MGD1(Y_FE_MARA). But in the function group already 10 Subscreens were created. Is this is the problem? or else copy the FG MGD1 into another FG and create the subscreen will be feasible to my scenario?
Please suggest me.
Thanks and Regards,
Muralikrishna Peravali -
Adding custom time field in service order
Hi Gurus,
Our customer wants us to add product date and time. I use transaction EEWB to add this date and time filed. In EEWB field types are only BOOL,CHAR,DATS and NUMC. I can add my date by selecting DATS. But how can I create my time field that after cerating I will see it in the table cRMD_ORDERADM_H with data type TIMS??
Do I have to use defined date profile entries to take my time value??? Can't we use custom time field in service??? if yes how??Hi,
You can make date fields available at item nivel without create custom fields.
All you have to do is create a date profile and assign it to your item category.
To create a date profile:
transaction SPRO->Customer Relationship Management->Basic Functions->Date Management->Define Date Profile
To assign to an item category:
transaction SPRO->Customer Relationship Management->Transactions->Basic Settings->Define Item Categories
I hope it helps!
Kind Regards,
Gabriel Santana -
Added custom date fields at contract;need to trigger mail using those dates
Hi,
II have added 14 custom fields in the service order quotation for handling waranty start date and end dates capturing for the maximum of 7 years contract.
Then its usual yearly action of the waranty team to put the dates in those fields.
The first set of 2 input fields will be filled at the quotation creation itself; rest the set of 12 fields will be updated in this 7 years time.
My requirement is such that to the capture all the waranty end dates filled in the input fields and trigger a mail 30 days prior to that days.
Example : I have contract from 01/08/2004 to 31/07/2010.
Then my waranty startdate / end date can be filled by waranty team as 01/08/2004 to 31/07/2005 in the waranty first year.the i need to trigger a mail to waranty team on 01/07/2005.
For the second year if we have dates filled as 01/08/2005 to 31/07/2006; then to trigger mail on 01/07/2006.
I have tried using ACTIONS but couldn't get much help.
As a work around thinking for a report to fetch the contract for that Trans.type and check the dates with the present date + 30 and collect those to perfrom the respective actions.This is workaround.
Tried using the DATE TYPES creating 7 different DATE TYPES and assigning the ( end dates - 30 ) to that manually upon save.
and using this DATE TYPE along with the action definition can we acheive ? but it too will be work around.
How to acheive this one. It became critical now in the project.
Thanks and Regards,
Satish AkkinaHi,
In your scenario, you don't need synchronous email facility.
Probably you can create a z table and maintain all required dates in this table (before saving your transaction somewhere you would have to read your custom fields and save them in this table along with object ID/GUID). Then create a report that would read dates from z table and then send emails to your warranty team. Schedule this report in background with frequency of once day.
Hope that helps.
Regards,
BJ -
Add custom MARC fields in MM41, MM42, MM43?
Hi all,
I need to implement 4 custom fields (aleady appended to MARC) to MM41, MM42, MM43 - I know how to add the new subscreen from the configuration path Logistics General/ Material Master/Configuring the material master (have also read OSS note 44410).
My questions are:
1) Will this configuration work for Articles (as opposed to materials) & what are the differences?
2) Is there a Badi needed to transfer custom fields to MARC in MM41/2/3? I can't find one - the fields only need screen validation and nothing else.
Many thanks in advanceHi,
Please refer the below link.
This is for MM01. I understand that you are into Retail system. Hope the same processing logic can be done in your scenario also.
saptechnical(dot)com(slash)Tutorials(slash)ExitsBADIs(slash)MM(slash)MM01(dot)htm
Replace the bracket words with the correct symbols.
With Regards,
Sumodh.P -
New G/L and adding customer specific fields
Hi all,
does anyone have any experience about adding additional fields in New G/L? I would like to add an additional field that would be filled every time a document is posted. It would be best if it could be in the document header but in line items is ok also.
Thanks!
DuskoGood morning. I have this same exact question. I have found 1000 documents telling me this is possible and that it is a new feature of the new G/L, but I haven't found any documentation explaining how to implement this feature.
Does anyone have a link to implementation details, or a document that they could send to [email protected]
Thank you in advance for your time,
Andy -
Adding customer Z field at reservation header level
Hi experts!!
I have created an append in table RKPF in which I have created field ZELPEP.
I have created an implementation of badi MB_RESEVATION_BADI to manage value that user will enter from the screen in field ZELPEP.
Which is the way to paint ZELPEP field in transaction mb21? I would not like to modify standard dynpro ( SAPMM07R - 0521).
Thanks in advance.Dear Jaione,
U have change or modify standard dynpro ( SAPMM07R - 0521) through acces key( SSCR) https://websmp105.sap-ag.de/sscr only.
Regards,
Abbas. -
Adding Customer-specific Fields: Master Data Objects
Hi,
Somebody already obtain to include new fields in SAP MIC( Management Internal Controls) version 2.0?
Att.
Anderson AlmeidaYou need to study the PCUI (People Centric User Interface).
MIC software use this engine to control the web interface.
Very complete guide:
https://websmp209.sap-ag.de/~sapidb/011000358700001093962006E/PCUIBook50_06.pdf
a quick intro by weblog:
/people/vijaya.kumar/blog/2005/06/10/people-centric-user-interface-pcui--getting-started
Regards,
Sergio -
"500 internal server error" after adding custom fields to Address page
I need to display custom fields on the "Addresses" and the "Personal Data" pages. For that, we added custom CI_INCLUDE fields in both PA0006 and PA0002 tables as per instructions below
https://www.sdn.sap.com/irj/scn/wiki?path=/display/profile/essPersonalInformationUIenhancementwithoutmodification&focusedCommentId=28278867
we also extended the Badi HRPAD00INFTYUI
custom fields show up OK in page "Personal Data". However when trying to browse to page "Addresses"
we get the following error:
"500 internal server error - com.sap.tc.webdynpro.progmodel.context.ContextException: MappedNodeInfo(DetailView.SelectedInfotype): unknown child node Area8 ".
"Area8" is one of the custom fields we added in PA0006 (Address infotype).
any idea what is wrong? maybe Badi HRPAD00INFTYUI cannot handle 2 infotypes in the same time?
T.Hi Sasu,
Its clearly saying contect binding error. Have you mapped correctly from FcComponent to VcComponents.
FcCompoenets for Model logic.
Check the mappings correctly.
If it is complete custom or new field then there will be could of steps.
1) Reimport the model
2) map new field to FcComponent
3) Bind new Fields from Fc to Vc
Rgds
-SS -
Adding new fields to MASS tcode
Hi All,
I want to enhance MASS functionality by adding some more fields to "MASS" T code.
This is because not all the BP fields are avaialble in "MAS" T code.
Also, we have defined some new fields which also needs to be added.
is there any way to add fields to "MASS" T Code.
Regards,
RahulHi Rahul,
What you could do is use SM30 and pull table MASSFLDLS here make changes to object BUS1006 (for business partner) table BUT000 and add the respective fields. This activity should help you to see the relevant fields show up on MASS tcode.
Write to me if you have some questions.
With compliments,
Tarovar. -
E-Recruiting Custom Data Fields & Flexibilization
Hi,
Our development team has added custom data fields for work experience (IT5103) via include CI_P5103. We are unable to adjust the appearance of the fields via Flexibilization.
Steps we followed:
1. Developers added fields (Z_FIELD1 & Z_FIELD2) to CI_P5103
2. Created contexts EXTRNL & INTRNL
3. Configured Flexibilization for Z_FIELD1 & Z_FIELD2 in EXTRNL for SAP/HRRCF_PROFILE/WORKEXPERIENCE_DETAIL.BSP to Hidden (Item Considered for Calculating Layout)
4. Configured Flexibilization for Z_FIELD1 & Z_FIELD2 in INTRNL for SAP/HRRCF_PROFILE/WORKEXPERIENCE_DETAIL.BSP to Display Only
5. Ran RCF_GENERATE_URLS for both EXTRNL & INTRNL
6. Both fields show on External Candidate Start Page (EXTRNL) and Internal Candidate Start Page (INTRNL) and are not affected by the Flexibilization config
Any suggestions would be greatly appreciated.
Thanks in advance.
Jason
E-Recruiting 6.0 SP11
BSPsDeepak, thanks for the input.
I understand your feedback, but I don't see anything in that documentation that excludes custom fields from the modification of display.
Define Additional Fields says:
You can define additional fields for various infotypes in a Customer Include. The additional fields are displayed automatically on the relevant page.
Modify Fields in Interfaces says:
In this IMG activity you can switch fields on and off on certain application user interfaces and flag fields as mandatory fields. You assign these field definitions to a context in which the changes to the user interfaces are visible.
Screen flexibilization is possible for the following pages:
Candidate Profile
Namespace/Application/Page Page Name...
SAP/HRRCF_PROFILE/WORKEXPERIENCE_DETAIL.BSP Work Experience
It seems logical we should be able to alter the display for a custom field that if the field is defined in the approriate include.
I guess this could be another case of logic and SAP not following the same path.
Jason -
Issue with custom search fields in agent inbox
Hi All,
I am working on CRM agent inbox 7.0. The issue I am facing is like this:
I have added custom search fields in inbox. When give a combination of standard search field and custom search field, the result is only based on standard field. The value of custom field is not considered.
Is this a standard behaviour? Are standard fields given higher priority that custom fields?
Any pointers on this would be highly helpful.
Thanks,
NarendraHi Naren,
Did you add custom field using AET? If yes then while adding custom field using AET did you make it search and result relevant?
There is nothing like priority in standard SAP fields and custom fields.
Please let me know so that I can further help you.
Thanks,
Bhushan -
Hi Gurus,
I have added Customer Specific Fields in a Notification Type.
I need a Report with these Cutomer Specific Fields ( added by Screen Exit) in the Standard Transaction like IW65,IW69.
Please give me the solution, suggestions to Extarct these fields in Standard Reports.
With best ragards,
NarendraNarendra,
I'm not sure IWOC0004 will help...
If you are using ECC6, then investigate enhancement spots in the respective programs. Your ABAP team should be able to help.
PeteA -
LSMW FOR MATERIAL MASTER USING BAPI_MATERIAL_SAVEDATA -Adding Custom Fields
Hi Gurus,
I'm developing LSMW for Material Master Upload using BAPI method.
Object:BUS1001006
BAPI:BAPI_MATERIAL_SAVEDATA
MESSAGE TYPE: MATMAS_BAPI
BASIC TYPE : MATMAS_BAPI03.
There is a requirement to use/map a custom field. Upon research custom field can be added to the parameter EXTENSIONIN and EXTENSIONINX, but I have no Idea on how to do it with LSMW. Please advise what approach is needed.
Thanks and Regards,
JayHi Gurus,
I got the following code below.
The custom field won't get updated.... Please advise on what should I do... I've checked different forums and still can't come up with the solution... Please advise..
REPORT ztest_extend_matmas1.
STRUCTURE
TABLES:
bapimathead, "Headerdata
bapi_mara, "Clientdata
bapi_marax, "Clientdatax
bapi_marc, "Plantdata
bapi_marcx, "Plantdatax
bapi_makt, "Material description
bapiparex, "Extensionstruktur
bapiparexx,
bapiret2. "Return messages
DATA:
bapi_te_mara LIKE bapi_te_mara,
bapi_te_marax LIKE bapi_te_marax,
v_file TYPE string.
INTERNAL TABLE
*to store the output data
DATA:BEGIN OF it_material_number OCCURS 0.
INCLUDE STRUCTURE bapimatinr.
DATA:END OF it_material_number.
*for materialtext
DATA:BEGIN OF it_materialdesc OCCURS 0.
INCLUDE STRUCTURE bapi_makt .
DATA:END OF it_materialdesc.
*für z-feld
DATA:BEGIN OF it_bapiparex OCCURS 0.
INCLUDE STRUCTURE bapiparex.
DATA:END OF it_bapiparex.
*für z-feldx
DATA:BEGIN OF it_bapiparexx OCCURS 0.
INCLUDE STRUCTURE bapiparexx.
DATA:END OF it_bapiparexx.
*to return messages
DATA:BEGIN OF it_return2 OCCURS 0.
INCLUDE STRUCTURE bapiret2.
DATA:END OF it_return2.
DATA:BEGIN OF it_return OCCURS 0.
INCLUDE STRUCTURE bapiret1.
DATA:END OF it_return.
DATA
lt_messages TYPE bapiret2_t.
PROCESSING
*bapimathead-material = it_material_number-material.
bapimathead-material = '100-2520'.
bapimathead-ind_sector = 'P'.
bapimathead-matl_type = 'AEM'.
bapimathead-basic_view = 'X'.
bapimathead-purchase_view = 'X'.
bapimathead-inp_fld_check = 'I'.
*bapimathead-BASIC_VIEW = 'X'.
*bapimathead-SALES_VIEW = 'X'.
*bapimathead-PURCHASE_VIEW = 'X'.
*bapimathead-MRP_VIEW = 'X'.
*bapimathead-FORECAST_VIEW = 'X'.
*bapimathead-WORK_SCHED_VIEW = 'X'.
*bapimathead-PRT_VIEW = 'X'.
*bapimathead-STORAGE_VIEW = 'X'.
*bapimathead-WAREHOUSE_VIEW = 'X'.
bapi_mara-matl_group = '0001'.
bapi_mara-old_mat_no = '100-251'.
bapi_mara-base_uom = 'ST'.
bapi_marax-matl_group = 'X'.
bapi_marax-old_mat_no = 'X'.
bapi_marax-base_uom = 'X'.
bapi_marc-plant = '1000'.
bapi_marcx-plant = '1000'.
it_materialdesc-langu = 'EN'.
it_materialdesc-matl_desc = 'DESC'.
APPEND it_materialdesc.
*bapi_te_mara-material = it_material_number-material.
bapimathead-material = '100-2520'.
*bapi_te_mara-zzforst = '4148'.
bapi_te_mara-material = '100-2520'.
bapi_te_mara-zzmar_field1 = '4148'.
*bapi_te_marax-material = it_material_number-material.
bapimathead-material = '100-2520'.
*bapi_te_marax-zzforst = 'X'.
bapi_te_marax-material = '100-2520'.
bapi_te_marax-zzmar_field1 = 'X'.
it_bapiparex-structure = 'BAPI_TE_MARA'.
it_bapiparex-valuepart1 = bapi_te_mara.
APPEND it_bapiparex.
it_bapiparexx-structure = 'BAPI_TE_MARAX'.
it_bapiparexx-valuepart1 = bapi_te_marax.
APPEND it_bapiparexx.
CALL FUNCTION 'BAPI_MATERIAL_SAVEDATA'
EXPORTING
headdata = bapimathead
clientdata = bapi_mara
clientdatax = bapi_marax
plantdata = bapi_marc
plantdatax = bapi_marcx
IMPORTING
return = it_return2
TABLES
materialdescription = it_materialdesc
extensionin = it_bapiparex
extensioninx = it_bapiparexx
returnmessages = lt_messages.
CALL FUNCTION 'BAPI_TRANSACTION_COMMIT'.
THanks and Regards,
Jay
Edited by: jhayyy on May 17, 2011 6:54 AM
Maybe you are looking for
-
How to add a new base currency in Clasic Mode
Helo, Please, let me know how can I add a new base Currency (RON), using Classic Mode, at time of creation a new Planning application (release 11.1.1.3). For the moment, at time of creating a new Planning application you can only select the base curr
-
this issue is not limited to one website, it seems to be problem with the browser or possibly any plugins but not any specific webpage
-
Cost element of cost item 99 0100 not defined
Respect to all HCM consultants, On releasing the planning scenario I am having error Cost element of cost item 99 0100 not defined how do I over come this?
-
Quicktime won't work in 64Bit mode
Hi, i have following problem: The Quicktime-plugin does not show any Quicktime movies when i start Safari in 64Bit. It only does when i switch to 32Bit. I'm using Safari 5 - SnowLeopard 10.6.3 - latest Quicktimeplayer - Intel Core 2 Duo/MacBook Any i
-
Dear support, One of our domain accounts was hacked and used to send out spam. This issue has been resolved days ago. We still get the following message when we try to send mail: You do not have permission to send to this recipient. For assistance, c