Adding Customer Fields to AS91 - Asset Management

Has anyone added customer fields to the AS91 transaction. I'm writing a conversion program to load legacy data and I would like to add more fields to the Origin tab.  If I can't do that, then I would like to add another tab to the transaction.  There is a CI_ANLU include which allows me to add the fields to the Asset Master Record, but there's not any screen exits to add those custom fields to the screen.
Thanks.
Linda

Do following.
1. Go to Transaction AOLA.Its a customising Transaction.
2. Create your own Layout for ex. ZSAP.
3. Go to tab page titles and make sure you have all tabs in place.
4. Select tab where you want to put.
6. Add a record in it.
5. Under Groups you will find your screen prefix with U.for example if screen number is 9001 then under group box you will find U9001.
Check Transaction AOLK. Where you have to assign layout to Asset Class.
That will display the User defined screens in that tab.
In SPRO following is the path.
SPRO->Financial accounting->Asset Accounting->Master Data->Screen Layout
Message was edited by: Deepak Bhalla

Similar Messages

  • Adding custom fields to standard Asset Accounting  ALV reports

    Hello,
    I have recently added some fields to the Asset Master table ANLU using the customizing include CI_ANLU.  I have also added some fields using an append structure to ANLZ.  I now need to have these fields available in the standard reports for Asset Accounting.  One example is the report generated for transaction S_ALR_87011963.  I need the new fields available in the 'Displayed Columns' list when clicking the Change Layout icon.  Any suggestions?
    Thanks,
    JR

    Hi Vignesh,
    Adding new fields is not possible, but custom subscreens can be added.
    Check enhancements QQMA0001 (subscreen for notification header) and QQMA0008 (subscreen for additional data).
    It might help you.
    Thanks & Regards,
    Swati

  • Adding Custom Fields to the Recipe Management Workbench

    Hi Experts
    I'm trying to add fields to the Quatities Tab of the recipe dependent and the stage dependent formulas
    in RMWB (Recipe Management Workbench).
    I've added other fields to the Input and output tab by appending the frmls_iot_scr structure and then doing the layout setup
    in SPRO but where and how do I go about adding fields to the Quantities Tab and is there a BADi that can then be used to fill
    those additional fields.
    Any help would be much appreciated.
    Regards
    Vic

    Hi Vic,
    There are no exits or BAdI for extending the fields for the view quantities. New fields must be added at the structure FRMLS_TOTALS and added into the customizing table FRMLC32 as col_id. Then the processing of the fields is still to be programmed. The function group is FRML600.
    You can use also a copy of the group group.
    Best regards,
    Roland

  • Adding custom fields to Embedded Search

    Hi All,
    I have read the post [here|How to add custom fields to Embedded Search; about adding custom fields to Embedded Search. I am looking to add Employee Subgroup for use in Talent Management (specifically the STVN SuccessionPlanning component) and wanted to know if anyone can expand on the instructions in the link to add this field.
    It appears to be part of the HRTMC_PERSON search object connector already and while I've done some IMG configuration the field is showing in SuccessionPlanning, but not displaying any data.
    Additionally, I'd be interested in any tips to add information that is not from PA0002 should it be required in the future.
    Many thanks,
    Luke

    Hi Luke,
    I am assuming here that your search request fields are based on HRTCM_CENTRALPERSON search template. To enable your search to work on employee subgroup please do the following
    1) Check if the HRTMC_PERSON Template extracts the data from Infotype 0001 via SPRO node 'Define Search Models and Change Pointer' Extraction Class is 'CL_HRTMC_SEARCH_READ_PA_INFTY'.
    2) Via ESH_COCKPIT, goto Template Modeler and select your custom Software Component and press Edit. Goto roadmap step 5 - Define Requests - where all search request fields are defined. Its using these fields Talent search works.
    3) Select the search request e.g. 'SAP_TALENT_NAKISA', it would then show list searchable attributes in below table. Using 'Add' button select path for PERSK so that it can searched.
    It would look like this once selected
    OBJID(REL_CP_P)->HRTMC_REL_CP_P_209.REL_CP_P(REL_CP)->HRTMC_PERSON.OBJID->HRTMC_PERSON.ORG_ASSIGNMENT
    4) In step SPRO 'Define Search Requests and Search Field Names' , define Employee subgroup field with AliasSearchField = PERSK since thats what is defined in roadmap step 5.
    Hope it helps!
    Regards,
    Ricky Shah

  • How to Use EEWB in adding custom fields in transactions

    I have seen some tutorials on the net on how to customized transactions using EEWB. But it seems that CRM related transactions were the only examples I have seen. Is it possible to use EEWB in ANY transaction we wish to customize? We are planning to add custom fields in a Solution Manager transaction.

    Hi,
    I guess it depends on what transaction you want to add the field to. If for example you want to use transaction CRMD_ORDER (for processing issues, messages etc.) then EEWB fields created for table CRMD_ORDERADM_H will automatically be added in this transaction in a special tab called "Customer fields" (or something like that anyway).
    /Anders

  • Adding Custom fields to standard  SAP-EBP application

    Hi,
    A functionality requires some custom fields to be added to the standard SAP-SRM EBP ( Manage business partners) application.
    If I copy the whole BBP_VENDOR_CREATE program into a Z-program, and the BBPMAININT internet service to a Z-application, then would it be feasible??
    Which is the best way to add custom fields in a SAP standard EBP application--in the 'Manage business partners' section.
    Regards,
    Goutam

    Hi
    I don't think it's easily possible to add custom fields to the existing transaction - BBPMAININT.
    For adding customer fields you can refer the SAP OSS not - 672960, but I don't think it will be of much help here.
    <b>Since SAP has not upgraded this transaction - BBPMAININT for a quite long time, you need to do all the logic and validation from your end.</b>
    <u>Better to go for you own Z (custom program) and make your logic accordingly.</u>
    Regards
    - Atul

  • Adding custom fields to shopping cart in SRM 7.0

    Hi My dear Experts,
    I am having big doubt also a lot of confussion as per my understanding regarding adding custom fields to SC.
    I believe,
    i) It can be achieved by configuration in spro with respect to Meta data frame.
    i,e  Configure field control->configure control for fields on Header/Item level
    after that
    configure customer fields->Define cistomer fields on Header/Item level.
    ii) I also doubt fields can be added through Webdynpro enhancement of standard component.
    Pls clarify my doubt with little detail which is the best way to achieve my requirement ??
    Is Webdynpro Enhancement  really needed ??

    Hi ,
       Example for  Adding fields in SC accounting Tab ...follow the below example
    1. Add custom field ZZTESTACCT  in   structure   INCL_EEW_PD_ACC_CSF by  using  append structure.
    2. Spro ->Supplier Relationship Management u2192 SRM Server u2192 Cross application basic settings u2192 Extensions and field controls (personalization) u2192 Configure field control ->Configure Control for Fields of Substructures
    then click on  "Metadata for Fields of Substructures and Table-Like Enhancements"
    add the below entry
    Bus. Object Set Type  : 31
    Structure Field Name  : ZZTESTACCT
    Bus. Object Type       : BUS2121
    Set Level                    : Item
    Field Visible :  Check box should be checked
    Field Enable :  check box should be checked
    if you create the above entry then you can see ZZTESTACCT field in the accounting tab.
    Second point :
    WD_BADI_DOMODIFYVIEW  is a Badi you can implement this badi for the WD component and View to handle the UI elements.
    regards,
    Devi

  • Adding custom fields  through SE51

    Hi All!
    This is with regards to adding custom fields through Se51 to standard screens.I had added custom field KNVV-ZZKVGR6 to the screen.
    After drawing the text and I/O buttons.When I activate I am getting an syntax error saying Field KNVV-ZZKVGR6 is defined differently in screen (ABAP/4 field,Dictionary field).
    What does this mean.
    Also if i activate with a SAP standard field instead of the custom it is getting activated.
    But for both the ways I could not able to see the output on the actual transaction.Also the new drawings which i am drawing are in brown color(different form the existing one)
    Please advise.
    regards
    Praneeth

    hi Praneeth,
    what is the program name,screen number you are trying to modify..,and after appending the field <b>ZZKVGR6 to KNVV</b> , now go to table and choose menu <b>Utilities->Data base Utility-></b> now click on  <b>Activate and Adjust the Data base</b>, then try to add the field.
    and are you adding the field from Dictionary (i.e you have option Get From Dictionary in that give KNVV table name it will list the fields, choose zzkvgr6 from it, and place it in your screen.)
    the exit which you are adding should be appropriate one
    or else you won't get the desired results. what is the exit..
    Regards
    vijay

  • While adding custom field in urgent change-Create new field button in AET is not coming

    Dear All,
    we have requirement to add some custom fields in urgent change document. while adding custom fields using AET, create new field button is not coming.
    Thanks in advance. points will be awarded.
    Rahul

    Hi Jignesh,
    Thanks for your valueble inputs, it really helped me to understand the process.
    I checked in Web UI configuration for urgent change document as you mentioned but still that button is not coming.
    In transaction BSP_WD_CMPWB, i have created enh. set: Z_ENHANCEMENT_SET.
    Can you tell what to selelect in application and page popup which comes after selecting Enhance component button. Actually i tried but i am not able to add new record in conf.
    Thanks in advance.

  • CRM 7.0 / IS-U: adding custom fields to Business agreement for replication

    Hello Experts!
    We're working on replication of custom fields from IS-U to CRM 7.0.
    Can you help me with clarification of my understanding of these questions..?
    1) CRM/IS-U mapping tables for buag_main:
    Business Agreement(BUAG_MAIN) is a BO in CRM that corresponds to CRM table CRMM_BUAG and to Contract account in IS-U table FKKVKP.
    Table FKKVKP were enhanced with some z-fields,
    so we are going to enhance corresponding CRM table CRMM_BUAG (or CRMM_BUAG_H) with that new fields..
    But we see that these CRM and IS-U tables have far not the same field structures..
    So, the question: Which crm and is-u tables i should look, enhance and replicate for Business agreement?
    2) Access to Business agreement with possibility to add custom field:
    I couldn't find in Web UI where i can directly edit profile of Business Agreement..
    I've found just access to assignment block "Business agreement" on Account's profile overview page..(Role ServicePRO; Account details).
    There I used AET to add custom field..but I faced with problem when the 1st popup appeared: there was no enhanced object "Business Agreement"..
    Also in role "Utilities IC Agent" i've found "business agreement" profile but there I don't see buttons for adding custom fields..
    So, the question is: Where I can access Business agreement profile to enhance it with custom fields for replication with IS-U?
    3) CRM/IS-U data exchange functions:
    I tend to use tcode CRMC_BUT_CALL_FU:
    for CRM inbound event of BUAG object  - FM CRM_BUAG_MWX_PROCESS_EXT_STRUC..(as template).
    Question: Am I right that it fits my requirement to replicate custom fields from IS-U to CRM?
    Please tell me if you need more information..
    Looking forward to your answers.
    Thank you a lot in advance!
    Kind regards,
    Evgenia

    Hi Gobi,
    Thank you for advice. But:
    I've created fields not by using AET - I used documentation that Nicolas suggested me above.
    I've enhanced tables and structures that were mentioned there with my z-fields for both sides (CRM and ERP).
    Also I looked CRMC_BUT_CALL_FU for CRM Inbound BUAG_MAIN - corresponding standard FMs are marked for call.
    Any ideas?
    Thanks in advance.
    BR,
    Evgenia

  • Adding Custom fields to SRM Item Data tab & Account Assignment Tab

    Hi Everyone,
    We have got a small requirement to add 2 custom fields in SRM Shopping cart.
    Need to add a input field, which should act just like Requisitioner in ECC. ( F4 help ).This will allow to create shopping cart on behalf of some one.
    Need to add input field, which resembles Goods Recipient in ECC ( Free text)
    After adding custom fields, how do i ensure that, it's mapped to right field in ECC.I spent much browsing SRM forum, but couldn't gather much information. I understood that, this involves configuration in SPRO.
    Any information or help in any kind would be really helpful.
    Thanks in advance.
    Vishnu

    Hi Vishnu,
    Take look at this link.
    Add custom field to SC and POWL
    Thanks
    Senthil

  • Adding custom fields to Article Master (MM41/MM42)

    Hi  ,
    I have a requirement of adding custom fields to Basic data of Article creation in MM41 . I appended the fields to
    MARA table using Append structure . I followed the steps given in note 44410 . But i am unable to find an EXIT/BADI
    /ENHANCEMENT to populate the values of custom fields which get triggered during MM41/MM42 .
    But the Exit EXIT_SAPLMGMU_001 gets triggered only during MM01/MM02 . Kindly guide me to solve this .
    Thanks and Regards,
    S.Sivakumar

    Hi,
    Business Requirement:
    As per the client Business critical requirements, additional fields are
    required in the Article Master. This is because the existing fields in
    the Article master are not adequate to capture the data.
    We have referred the SAP Note 925424 (Table MAW1) and 44410 (MARA) for
    this.
    Based on the above note 44410, we have added fields in MARA table,
    since Manufacturing
    activities are envisaged in future instead of proceeding with 925424.
    Whether, MAW1 (925424) also to be considered?  
    Since this is very critical requirement from client, we cannot avoid
    and do not have any
    alternate solution.
    These fields will be used in reports and pricing in sales &
    distribution.
    Apart from this, are there any other SAP notes to be referred?
    Is there any restrictions there in length for fields to be used in MARA table .
    By referring note 44410 , i added 20 fields in MARA table, in which some 4 fields are more than 40 characters .
    All custom fields are updated in MM41 and MM42 .
    Shall i proceed by this approach .Kindly guide me on this .
    Thanks and Regards,
    S.Sivakumar

  • Adding Custom Fields to FAGLFLEXP Table

    Hello,
    We have a requirement to update WBS Element for Planning related Data. So have added custom field(WBS Element)  in structure CI_FAGLFLEX04.
    The field is visible when I open FAGLFLEXP table, but when I post data The custom field (WBS Element) is not being updated. Could you please let me know the process to update this field?
    Thank you in advance.

    Hi.
    The procedure isn't so simple. There are several posts on the subject SCN. I suggest research before you start developing.
    Start here:
    https://help.sap.com/saphelp_nw04s/helpdata/en/cf/21eb61446011d189700000e8322d00/content.htm
    However, the most important is: a) Is it really necessary to change the standard? b) There could be a Z table containing the new information and referencing FAGLFLEXP? c) What is the transaction that will keep the data? It has Exit´s for what you need?
    As Vadamalai said below,
    Actually your approach may be wrong, first as an ABAPer should ask to functional team, which transaction and where to insert the fields, it could be header or item level(I am saying example)
    Based on tcode, you need to enhance the table level as well as the screen exit/BADI we need to pass screen to internal programming structure. the structure type will be table type of FAGLFLEXP.
    Regards.
    Douglas

  • Adding custom fields to DB table

    Hi,
    I added custom fields in std DB table using CI_* , activated table using SE14. Now I want to remove the added custom fields , I deleted the CI_* using SE11. It still appears in DB table,  I mean I dont expect to disappear from DB table, when I double click it still takes to structure screen. I deleted include from SE80 also selecting Package, activated and adjusted DB table from SE14 after deletion, but it still appears and when I check the attributes it shows the same package , how to reset the CI_* , bottom line ,I want to make DB table normal as before, because of that I am getting dumps when I execute std DB table related T codes.
    It should be done in easy way but not able to get breakthrough.
    Please let me know your suggestions.
    Thanks

    Hi Sai,
    Try to assign the CI_* structure to $temp,i.e as local object and then activate it first.
    After that, try deleting the local object and adjust the table using SE14.
    If still it does not work, ask your BASIS consultant to do an "Alter table".
    May be that works!
    Thanks & Regards,
    Anshumita.

  • Adding custom fields to table view assignment block

    Hi All,
      I want to add two news fields to 'Service Contract Item Level' in 'Object List' assignment block. How can i add these two custom fields to table view assignment block using AET. I have tried to add new fields using AET but there is no business object supports to my requirement.
    Thanks & Regards
    Nitish

    Hi Nitish,
    As naveen sadid use Cutomer_i object . I guess it will be more appropriate.
    And following link will be helpful for AET creation.
    CRM 7.0 How to --4 Adding Custom Fields With The New Application Enhancement Tool (AET)
    Regards
    Loks

Maybe you are looking for

  • Will I need to put more memory on my MacBook Pro for Mavericks?

    I got my MacBook Pro in Februrary 2013 (so I think it's a mid 2012 model? Not sure). The memory for it is 4gb and 1600mhz. It came with OS 10.8, but I am now upgrading to Mavericks. My question... will I need to get more memory to fit Mavericks onto

  • Motion Menus not playing properley

    I'm creating a dvd with quite a few submenus. I've chosen the 5.0 theme sliding panes where 7 photos slide across the screen. Although some of the menus work properley the majority just load up on the last two photos and do no show the other photos m

  • Weblogic 9.2 JDk 1.5 DTD Validation

    Hi We are using xerces parser and doing DTD Validation . We want to have all the DTD present in the local directory C:/temp( as reading from the WAR is a performance hit) When we try to run with Weblogic 8.1 ( with JDK1.4 and JDK1.5 ) the xml is bein

  • How do I fix this photo?

    I'm fairly new to photoshop but know the basics. I often get photos like this. I've searched for tutorials but can't find any good ones. Anyone have a link to a tutorial or could point me in the right direction. I've tryed brightness/contrast, shadow

  • Removing "plus" symbol in Excel

    Hello dear Labviewers. I need to calculate the values in excel, and can't do that with those "plus" symbols. Is there any way to remove them from Excel ?. The problem occurs because my scale can measure both positive and negative values in grams. Bes