Adding data to my plan?
Right now, I'm in a shared plan with my family. We have 4 basic phones, and no data. How much would it add to the bill per month if I wanted to upgrade to a smartphone and get 2gb of data per month?
Hey ajm511,
Thanks for the great question! Tikibar is right, if you were to just add a data package to one line on the account, it would be $30.00 for 2 GB of data. You can go higher as well. Keep in mind, if you have multiple phones upgrading to smartphones, you may want to take a look at our Share Everything plans here http://bit.ly/xdDajD and that may save you some money versus individual packages for each line.
Thanks!
MichelleG_VZW
Please follow us on Twitter @vzwsupport
Similar Messages
-
I currently have a basic flip phone and have been offered a droid from a friend who upgraded to another phone. I have a basic plan, no data and currently pay month to month, if I change to the used driod phone and add 2g data to my plan does this change my plan from month to month to a new 2 year commitment? I have a single calling plan one of the old ones with unlimited mobile to mobile and 450 minutes, limited text messages if that matters.
What a nice friend you have! Data is a feature, not part of the contract, so adding a 2 G data package and 'bringing your own phone' shouldn't put you in a two-year commitment (i.e., require a new plan and contract) unless your calling plan isn't compatible with the Droid (which sometimes happens if it's a really old plan).
-
Reading data form multi planning area
Hi Guys,
I bulit planning function type Exit on the multi planning area. I need to get the data from two planning areas(Underlying infocubes)
but my exit functions is not reading data from second Infocube(Planning area), my requirment is i need to get the one Keyfigure value from the second infocube .
My formula is
If fistcube-charactric(Marketing spend) = secondcube -charcsterstic ( marketing spend)
firstcube -keyfigure(CRM cost) = Firstcube-Keyfigure(CRMCIRC) * Secondcube -keyfigure(marketing spend rate).
the value for marekting spend rate is not getting populated , but i can see the keyfigure markeig spend in the structure.
Is there any other way i can get marketing spend keyfigure from the second infocube.
This part is not getting populated.
*Handling rate
ElSEIF <xdata>-s_chas-ZMKTSPED = '0000486250'.
tmp_z_mksrate = <xdata>-s_kyfs-z_mksrate.
<xdata>-s_kyfs-zcrmcost = tmp_zcrm_circ * tmp_z_mksrate.
i tried to debug but i couldn't find out anything.
if anybody has experinced please share your ideas.
How to get value from second infocbue.
Here i am adding my code.
Data: lr_xdata type ref to cl_sem_planarea_attributes.
FIELD-SYMBOLS:
<xdata> TYPE /1sem/_ys_data_100ZCNA0001,
<t_xdata> type Hashed table.
Data: tmp_zcrm_circ type /BIC/OIZCRM_CIRC,
tmp_zcrmfacev type /BIC/OIZCRMFACEV,
tmp_z_mksrate1 type /BIC/OIZ_MKSRATE,
tmp_ZMKTSPED type /BIC/OIZMKTSPED.
**Get an instance of the planning area
call method cl_sem_planarea_attributes=>get_instance
EXPORTING
i_area = i_area
RECEIVING
er_instance = lr_xdata.
**create a table like xth_data
Data :lt_xdata type ref to data.
create data lt_xdata type (lr_xdata->typename_th_data).
assign lt_xdata->* to <t_xdata>.
clear: <t_xdata>.
SORT Xth_data.
Loop at Xth_data assigning <xdata>.
*Net Estimated Circulation
IF <xdata>-s_chas-ZMKTSPED = ''.
tmp_zcrm_circ = <xdata>-s_kyfs-zcrm_circ * ( <xdata>-s_kyfs-zcrmredr ) / 100.
tmp_zcrmfacev = <xdata>-s_kyfs-zcrmfacev.
Endif.
*Redemption
If <xdata>-s_chas-ZMKTSPED = '0000486213'.
<xdata>-s_kyfs-zcrmcost = tmp_zcrm_circ * tmp_zcrmfacev.
*Postage rate
ElSEIF <xdata>-s_chas-ZMKTSPED = '0000486201'.
<xdata>-s_kyfs-zcrmcost = tmp_zcrm_circ * <xdata>-s_kyfs-z_mksrate.
*Processing rate
ElSEIF <xdata>-s_chas-ZMKTSPED = '0000486230'.
<xdata>-s_kyfs-zcrmcost = tmp_zcrm_circ * tmp_zcrmfacev.
*Handling rate
ElSEIF <xdata>-s_chas-ZMKTSPED = '0000486250'.
tmp_z_mksrate = <xdata>-s_kyfs-z_mksrate.
<xdata>-s_kyfs-zcrmcost = tmp_zcrm_circ * tmp_z_mksrate.
ENDIF.
collect <xdata> into <t_xdata>.
ENDLOOP.
Refresh Xth_data.
INSERT LINES OF <t_xdata> INTO TABLE xth_data.
Endfunction.
Thanks in advance.
Best regards
SGHello SG,
first you can simplify your code by just defining <t_xdata> TYPE /1sem/_yth_data_100ZCNA0001. (No need for the dynamic type assignment).
The data of your second InfoCube needs to be a subset of the selection in your planning package. Check that the second area is also selected for example. Use the criteria in LISTCUBE (on the corresponding MultiProvider) to check that the selection works. Execute the planning function with trace. This shows you what data was selected.
Regards,
Marc
SAP CSA - Technology -
Not able to Upload data in Demand Planning data view
Hi
I am trying to upload a csv file in to Demand planning interactive planning through " Upload Data " functionality
First I exported data from interactive planning , updated some data in file and again trying to upload same file.
I am getting following error
File cannot be uploaded
Message no. /SAPAPO/SDP_UPLOAD009
Diagnosis
File has no technical information or incorrect technical information.
Procedure
Save the file again locally. Make sure that the file has the technical information.
Could u please suggest what needs to be done
Thanks and regards,
Nitin LavheHello,
For using the upload data functionality from interactive planning grid, you need to first download the data. While downloading the data, please check the check box for "Prepare the file for upload at later time", and then select the option of putting the technical setting into the file or into the system. Either way is okay. Then try uploading the same file.
This should solve your problem.
Thank you.
Regards,
Jacky Jain.
SAP APO Architect. -
Adding data to a specific row in excel
Hi there,
I have problems with my data collection from serial read block. I get every time 16 bytes when I write certain command to my serial device. But after a continuous data written to excel, that is let say six rows of data and after that I get one byte of data which I do not want to save in current updating excel sheet.
For that now, I have taken a case structure with two cases, one case contains nothing when I read the one byte and another case contains the code(Spreadsheet file VI) for adding data to excel when 16 bytes received one by one. Still, I am not getting what I wish for. The one byte case adding zero to the current excel file at row 6 and then continuous with 16bytes of data in remaining rows and again after 6 continuous rows it adds zero and so on. I don't know why it is adding zero even i did not put any code inside the case of it.
How could I eliminate this adding of zeros?
Here it looks like in my excel sheet.
row1: 15 16 17 18 19 20
row2: 15 16 17 18 19 20
row3: 15 16 17 18 19 20
row4: 15 16 17 18 19 20
row5: 15 16 17 18 19 20
row6: 0 (This when one byte reception case which contains no spreadsheet file VI)
row7: 15 16 17 18 19 20
row8: 15 16 17 18 19 20
row9: 15 16 17 18 19 20
row10: 0
Any help here around!You misunderstood my point. I have no code inside the adding zero case. It adding by no meaning. I have only written in one case to add continuous data to excel when ever I receive more than one byte. If I receive one byte exactly, I would not like to append this to excel but currently my program is doing that.
I have added my code snippet which is not the current working code. I am out of access to my current code. But instead I have attached similar one. You merely assume that the data is coming form serial read block.
Thanks for your efforts.
Attachments:
Excel.vi 11 KB -
Adding data labels to column graph
I work in the financial industry and I have to add data labels to all bars that appear in my ten year performance graphs (see http://fundinvestor.calamos.com/ClosedEndFunds/CEFund.aspx?name=CHI under the "Performance" tab as an example). Is there a script that can do this? I saw there's this technique that Adobe offers for column totals: http://livedocs.adobe.com/en_US/Illustrator/13.0/help.html?content=WS714a382cdf7d304e7e07d 0100196cbc5f-619e.html but that's not working. What am I doing wrong? Adding data labels to bars is ridiculously simple in Excel, why can't I find the way to do it easily in Illustrator?
http://help.adobe.com/en_US/Illustrator/14.0/WS714a382cdf7d304e7e07d0100196cbc5f-619ea.htm l
That should do the trick.
Mylenium -
Adding data to Manual Distribution Rule from DIAPI
Hi
I am searching for the object to insert the data to OMDR (manual distribution rule) using DI API. Can any one help me out.
I found many questions related to adding data to manual distribution rule using DIAPI which were not answered.
Thanks in Advance.hi.
Just check the below posts.
object type of distribution rules
Distribution rules setup.. -
Adding data to multiple tables using one form in Access 2010?
Hi All,
I have a access database with two tables and I want to create a single form to enter data into that tables.
How to adding data to multiple tables using one form in Access 2010?
I don't have to much knowledge of access database?
Please help me
Thanks
BalajiYou really don't enter identical data into 2 tables. You enter dat into one single table, and then you have an unique identifier that maps to another table (you have a unique relationship between two tables).
Maybe you need to read this.
http://office.microsoft.com/en-001/access-help/database-design-basics-HA001224247.aspx
Think about it this way... What is you update data in 2 tables, and then the data in one of those tables changes, but the data in the other table does NOT change. WHOOPS!! Now, you've got a BIG problem. For instance, you have a customer
named Bill Gates. In one Table you update Bill's address to 1835 73rd Ave NE, Medina, WA 98039 and in the other table you accidentally update Bill's address to 183 73rd Ave NE, Medina, WA 98039. Now you have 2 addresses for Bill. Why would
you want that??? Which is right? No one knows. If you have one address, you just have to update one address and if there is a mistake, you just have to update one address, but you don't have to waste time trying to figure out which is right
and which is wong...and then update the one that is wrong.
Post back with specific questions.
Knowledge is the only thing that I can give you, and still retain, and we are both better off for it. -
Adding data in internal table using extracted data
Hi Experts,
Good day!
I have a requirements in our historical data of material price which adding data that are not existing based on data extracted from standard tables such as A004 and KONP.
Now, i need to use the VALIDFROM (DATAB) value as basis for the latest price.
To make it more clear, see the example below:
Extracted data:
Material Number Valid From Valid to Price
100101 01/01/2008 02/01/2008 100.00
100101 02/02/2008 04/02/2008 100.00
100101 04/03/2008 08/01/2008 200.00
100101 08/02/2008 01/31/2009 300.00
100102 05/02/2008 07/01/2008 10.00
100102 07/02/2008 10/31/2008 15.00
100102 11/01/2008 01/31/2009 20.00
Output:
Material Number Calmonth Price
100101 01/2008 100.00
100101 02/2008 100.00
100101 03/2008 100.00
100101 04/2008 200.00
100101 05/2008 200.00
100101 06/2008 200.00
100101 07/2008 200.00
100101 08/2008 300.00
100101 09/2008 300.00
100101 10/2008 300.00
100101 11/2008 300.00
100101 12/2008 300.00
100101 01/2009 300.00
100102 05/2008 10.00
100102 06/2008 10.00
100102 07/2008 15.00
100102 08/2008 15.00
100102 09/2008 15.00
100102 10/2008 15.00
100102 11/2008 20.00
100102 12/2008 20.00
100102 01/2009 20.00
Text that are in bold are the added data. What is the best code to do with this?
How can i come up with this output? Help me please
Thanks and Godbless,
nipsHi Nips,
Logic shud b sumthing on similar lines
lv_count = 1.
Loop at itab into watab.
if lv_count > 12.
lv_count = 1.
endif.
if watab-date+0(2) = lv_count.
append watab to gt_output.
continue.
else.
concatenate lv_count sy-datum+4(4) into watab-date.
append watab to gt_output.
endif.
endloop.
Best regards,
Prashant -
One thing I am finding a little awkward; Adding data in the grid. It would be nice to be able to use tab to get to the next cell. At present it just highlights the cell and typing doesn't do anything until the cell is clicked. Equally hitting return I would expect it to give me a new blank row. I would like to be able to add a couple of rows of data without resorting to using the mouse at each turn.
Very good initial impressions though.Yes we should do this as it's what everyone will expect from Excel.
-kris -
Adding data from one matrix to another
Hay guys.I'm having trouble with adding data, that is situated in a Matrix on form A and bound to a userdatasource,
to a Matrix on form B that is bound to a dbdatasource.
For some reason the data either does not display at all, or it only displays the last records' data as many times
as there are records in the original matrix from form A.
Here's the code I've tried: (Displays only last record x times)
For i = 1 To oMatrixSync.RowCount
oFormTime.DataSources.DBDataSources.Item("@TB_TIMEDET").SetValue("U_Activity", _
oMatrixTime.RowCount, _
oFormSync.DataSources.UserDataSources.Item("U_Act").ValueEx)
oMatrixTime.AddRow()
next
And this code displays zip:
For i = 1 To oMatrixSync.RowCount
oCheckBox = oMatrixSync.Columns.Item("c_Check").Cells.Item(i).Specific
If oCheckBox.Checked = True Then
oEditS = oMatrixSync.Columns.Item("c_Activity").Cells.Item(i).Specific
oFormTime.DataSources.DBDataSources.Item("@TB_TIMEDET").SetValue("U_Activity", _
oMatrixTime.RowCount, _
oEditS.Value)
oMatrixTime.AddRow()
oMatrixTime.LoadFromDataSource()
next
Any help would be greatly appreciated, thanx all!
Message was edited by: Tjaard Du PlessisThanks, Jaro!
You are right. The code should look like this:
Dim oDBDSTime As DBDataSource = oFormTime.DataSources.DBDataSources.Item("@TB_TIMEDET")
Dim oUDSSync As UserDataSource = oFormSync.DataSources.UserDataSources.Item("U_Act")
For i = 1 To oMatrixSync.RowCount
oMatrixSync.GetLineData(i)
oDBDSTime.InsertRecord(i)
oDBDSTime.SetValue("U_Activity", _
i, _
oUDSSync.ValueEx)
Next
oMatrixTime.LoadFromDataSource()
Regards,
Frank -
Hi Guys,
I have another problem on adding data source on EID. When I try adding a data source on EID as a JDBC source I get error that says "Could not establish a connection"..Do you tell me step by step what I have to do when I add a data source on Endeca? My data has based on SQL 2008.The Studio Administration and Customization Guide includes the information on creating and managing data sources.
Adding and editing data sources in the Data Source Library
I don't know anything about the specific format of a connection URL for SQL 2008. That should be fairly standard, though. -
Adding data dynamically to JTable with a filter - getting error
Hello,
I am using JTable, and adding data and displaying it worked fine
until I tried adding a filter,
can anyone tell me what am I doing wrong or
why am I getting this Error?
The Error message
Exception in thread "AWT-EventQueue-0" java.lang.NullPointerException
at javax.swing.DefaultRowSorter.convertRowIndexToModel(DefaultRowSorter.java:501)
at javax.swing.JTable.convertRowIndexToModel(JTable.java:2620)
at javax.swing.JTable.getValueAt(JTable.java:2695)
at javax.swing.JTable.prepareRenderer(JTable.java:5712)
at javax.swing.plaf.basic.BasicTableUI.paintCell(BasicTableUI.java:2075)
at javax.swing.plaf.basic.BasicTableUI.paintCells(BasicTableUI.java:1977)
at javax.swing.plaf.basic.BasicTableUI.paint(BasicTableUI.java:1773)
at javax.swing.plaf.ComponentUI.update(ComponentUI.java:143)
at javax.swing.JComponent.paintComponent(JComponent.java:763)
at javax.swing.JComponent.paint(JComponent.java:1027)
at javax.swing.JComponent.paintChildren(JComponent.java:864)
at javax.swing.JComponent.paint(JComponent.java:1036)
at javax.swing.JViewport.paint(JViewport.java:747)
at javax.swing.JComponent.paintChildren(JComponent.java:864)
at javax.swing.JComponent.paint(JComponent.java:1036)
at javax.swing.JComponent.paintToOffscreen(JComponent.java:5122)
at javax.swing.BufferStrategyPaintManager.paint(BufferStrategyPaintManager.java:277)
at javax.swing.RepaintManager.paint(RepaintManager.java:1217)
at javax.swing.JComponent._paintImmediately(JComponent.java:5070)
at javax.swing.JComponent.paintImmediately(JComponent.java:4880)
at javax.swing.RepaintManager.paintDirtyRegions(RepaintManager.java:803)
at javax.swing.RepaintManager.paintDirtyRegions(RepaintManager.java:714)
at javax.swing.RepaintManager.seqPaintDirtyRegions(RepaintManager.java:694)
at javax.swing.SystemEventQueueUtilities$ComponentWorkRequest.run(SystemEventQueueUtilities.java:128)
at java.awt.event.InvocationEvent.dispatch(InvocationEvent.java:209)
at java.awt.EventQueue.dispatchEvent(EventQueue.java:597)
at java.awt.EventDispatchThread.pumpOneEventForFilters(EventDispatchThread.java:269)
at java.awt.EventDispatchThread.pumpEventsForFilter(EventDispatchThread.java:184)
at java.awt.EventDispatchThread.pumpEventsForHierarchy(EventDispatchThread.java:174)
at java.awt.EventDispatchThread.pumpEvents(EventDispatchThread.java:169)
at java.awt.EventDispatchThread.pumpEvents(EventDispatchThread.java:161)
at java.awt.EventDispatchThread.run(EventDispatchThread.java:122)I am also using my own class that extends "AbstractTableModel"
as TableModel,
public class MyTableModel extends AbstractTableModel {
ArrayList<TableData> tableData=new ArrayList<TableData>(10);
String[] columnNames=new String[]{"S/N"," Time (mili)","SD","SA","SSAP","DA","DSAP","FC","DATA"};
public void addRow(TableData data){
tableData.add(data);
fireTableDataChanged();
@Override
public int getRowCount() {
return tableData.size();
public TableData getRow(int i){
return tableData.get(i);
@Override
public int getColumnCount() {
return columnNames.length;
@Override
public String getColumnName(int col) {
return columnNames[col];
@Override
public Object getValueAt(int rowIndex, int columnIndex) {
return tableData.get(rowIndex).getValue(columnIndex);
}The Row Filter class
class myRowFilter extends RowFilter<MyTableModel,Integer>{
@Override
public boolean include(Entry<? extends MyTableModel, ? extends Integer> entry) {
// Entry < SomeCostumTableModel , Integer> entry ; Integer =Identifier= Row Number
boolean frame_type;
MyTableModel model=entry.getModel();
TableData data=model.getRow(entry.getIdentifier());
frame_type=((SD1&&data.SD==TableData.SD1) ||
(SD2&&data.SD==TableData.SD2) ||
(SD3&&data.SD==TableData.SD3) ||
(SD4&&data.SD==TableData.SD4) ||
(SC&&data.SD==TableData.SC) );
return frame_type;
}and How I add the filter to the Table
private MyTableModel myTableModel=new MyTableModel();
private RowSelectionListener rowSelectionListener=new RowSelectionListener();
TableRowSorter<MyTableModel> sorter=new TableRowSorter<MyTableModel>(myTableModel);
private FilterFrame filterFrame=new FilterFrame(this);
// then in the constructor of the main frame
// I call this
sorter.setRowFilter(filterFrame.filter);
MainTable.setRowSorter(sorter);
sorter.setSortsOnUpdates(true);Edited by: YellowMurdoch on Nov 17, 2009 6:31 AM
Edited by: YellowMurdoch on Nov 17, 2009 6:31 AMThanks for noting that.
you mean like this?
public void addEntry(TableData data){
myTableModel.addRow(data);
javax.swing.SwingUtilities.invokeLater(new Runnable(){
@Override
public void run(){
myTableModel.fireTableRowsInserted(0,0);
}both work,
would putting "invokeLater" inside "addEntry" somehow mess other things?
i guess that means addRow() is not supposed to update the table graphically?
Edited by: YellowMurdoch on Nov 17, 2009 9:30 AM
Edited by: YellowMurdoch on Nov 17, 2009 9:33 AM -
Adding Data through LOV when LOV validation fails to bring row
Question on Adding data to LOV:
Just like in form 5(Professional Forms), Is there a way to dynamically insert the row to add data if the data entered is not in the LOV? I have searched forum and looked at Dev Guide but didn't find any notes. One way is making "AutoValidation" false so LOV will not fire and validate, THEN upon SAVE just commit trx. Will this work? or Is there a better thought. ThanksSet the Disable Validation property of the LOV Item to "True"
Thanks,
Kumar -
Overwrite data in the Planning Cube
Hi Gurus,
I am new to BPS, I have created a simple Manual planning layout for my users
where they could enter their plan data for either plan or forecast version.
As you all know the cube is always additive and cannot overwrite the Keyfigures directly
I want to know if there is any in built planning function which would do that.
For example Right now if the users first enter like
Plant Profit center version QTY
1000 2200 SP0 100
and they think the number 100 is too much and they want to readjust it 80
they want to enter as 1000 2200 SP0 80 but cube is additive so it is making the QTY as 180 instead of 80.
As of now they are entering as 1000 2200 SP0 -20 to adjust it to 80 which they don't want to do
Hope I communicated well.
Thanks
Jay.The basic functionality of manual planning is to save the data in the cube the values which we enter in the layout. If we make 100 to 80 in the layout, after saving, cube will have 80 only, not 180. Ofcourse cube is additive, in the sense, to make the 100 to 80, system generates a record of -20 in the cube so that the overall result is 80. User doesnt need to enter -20 to have 80 in the cube. Recheck once again.
Maybe you are looking for
-
Multiple condition checking question
Hi I have a newbie question - if ((temp == null) && (!temp.text.equals(""))) { statement; If temp really is null, would this give a compiler error? or would it simply break after the first condition? Thanks, Mike
-
How can I download java game?
Hi everyone, sorry for my english, it is not my native language. I have Game.Jar file, which is java game for Nokia ,and I uploaded this file into database. Now I have a filed, type of byte[] (array of bites) next, I generate URL like http://site.com
-
Image Placed into InDesign CS6 appears reversed/missing
I am using InDesign CS6 on Windows 7, 64-bit. I have worked in InDesign off and on for the past three years and have never experienced this problem before. I have always placed images into InDesign with no problem and now I have this *one* image that
-
I just installed 8.6 on my G3 server and when turned on, it takes about 3 minutes before monitor clicks in-then it displays a white screen and reads "can't OPEN' for about 4 lines down the screen. After that the OS starts. Any way to fix this?
-
Is there a full download option?
I need to download Reader 9 to burn to CD, because the site I need it at only has a 512k frame which would be hammered by a download (I can download it from home with my 6mbit connection). Is there a way to download Reader without using the download