Adding data to plan

I currently have a basic flip phone and have been offered a droid from a friend who upgraded to another phone. I have a basic plan, no data and currently pay month to month, if I change to the used driod phone and add 2g data to my plan does this change my plan from month to month to a new 2 year commitment? I have a single calling plan one of the old ones with unlimited mobile to mobile and 450 minutes, limited text messages if that matters.

What a nice friend you have! Data is a feature, not part of the contract, so adding a 2 G data package and 'bringing your own phone' shouldn't put you in a two-year commitment (i.e., require a new plan and contract) unless your calling plan isn't compatible with the Droid (which sometimes happens if it's a really old plan).

Similar Messages

Issues with Writing back data to Planning Cube After adding a new characterstic

Hello,
We have two cubes and a MP on top of it. ( Reporting Cube and Planning Cube ). An aggregation layer has also been built and so does a planning BEx query on top of it.
Before Scenario: things were working fine as we were able to write back data to planning cube using the BEx.
After Scenario: We created a new Dimension in the planning cube and added a new characteristic ( lets call it ZX_KEY ) . This Characteristic holds the concatenated values of some of the other characteristics in its master data tables . ( For ex: Account_Customer ID_Country-code_Industry-code ).
This new characteristic is also present in the reporting cube and has been added and transferred to MP.
This new characterstic was added to the planning BEx query as one of the rows and we executed it the analyzer. After entering the required values for all characterstics ( including the newly added ZX_KEY ) and the key figure values, we tried saving it. Now this is where the Analyzer is throwing up this error..
~~Characterstic combination cannot be assigned to part provider ~~
~~Characterstic 'ZX_KEY'; Characterstic value 'R123000000_12_US_TX'~~
~~ Entered values are incorrect:Correct before navigation ~~
The value that we are entering ( R123000000_12_US_TX ) is picked up from the master data table of ZX_KEY by double clicking and selecting it from the fetched values. So i am not sure as to why its throwing up the above error. Request your help on this please.
regards,
Karthik

Hi,
Try to check that all characteristics are correctly assigned at multiprovider level.
hope it helps

Error after Save Plan Data in Planning Modeler

I'm working with IP NW 7 SP16.
Scenario:
I added a KF to Real Time Cube. Re-activated this cube and Multiprovider.
Made corresponding changes in Aggregate, re-activated.
All these objects look OK.
Planning functions work fine. However then I SAVE Planning Data in Planning Modeler (Planning Sequence) I get an error:
An exception occurred that was not caught., error key: RFC_ERROR_SYSTEM_FAILURE
The OSS Note 1057548 refers to SP 15 ( I'm on SP16).
I guess something nedd to be regenerated. I ran RSPLR_GENREP_DELETE_ALL with FUNC1
but it didn't make any difference probably because the Planning Funcitons work OK.
Any suggestions?

Hi,
could you also regenerate the artificial queries MULT/!!MULT where MULT is the name of your Multi-/Infoprovider/AggLevel in transaction RSRT.
Hope this helps ...
Regards Matthias Nutt

Unable to copy data in planning

Hi Gurus,
I am unable to copy data using "copy data" in planning web application.
getting an error "MSG_COPY_DATA_OPTIONS_FAILED: An error occurred while running the specified calc script. Check the log for details."
here are the steps I checked:
I checked whether planning and essbase are in sync.
The DBA team says that there was no spikes in memory.
when I take small data set it see data in target but the status in Job Console says processing for the past 45 min.
I was copying only one month of data.
please help.

I see you must of read the two Oracle Support articles by what you wrote in your post.
Have you checked the essbase app log? also it sometimes help to restart the planning web app when it happens.
Also have a read of Re: Where is the calc script created when running the 'Copy Data' function ?
Cheers
John
http://john-goodwin.blogspot.com/

Adding data to a specific row in excel

Hi there,
I have problems with my data collection from serial read block. I get every time 16 bytes when I write certain command to my serial device. But after a continuous data written to excel, that is let say six rows of data and after that I get one byte of data which I do not want to save in current updating excel sheet.
For that now, I have taken a case structure with two cases, one case contains nothing when I read the one byte and another case contains the code(Spreadsheet file VI) for adding data to excel when 16 bytes received one by one. Still, I am not getting what I wish for. The one byte case adding zero to the current excel file at row 6 and then continuous with 16bytes of data in remaining rows and again after 6 continuous rows it adds zero and so on. I don't know why it is adding zero even i did not put any code inside the case of it.
How could I eliminate this adding of zeros?
Here it looks like in my excel sheet.
row1: 15 16 17 18 19 20
row2: 15 16 17 18 19 20
row3: 15 16 17 18 19 20
row4: 15 16 17 18 19 20
row5: 15 16 17 18 19 20
row6: 0 (This when one byte reception case which contains no spreadsheet file VI)
row7: 15 16 17 18 19 20
row8: 15 16 17 18 19 20
row9: 15 16 17 18 19 20
row10: 0
Any help here around!

You misunderstood my point. I have no code inside the adding zero case. It adding by no meaning. I have only written in one case to add continuous data to excel when ever I receive more than one byte. If I receive one byte exactly, I would not like to append this to excel but currently my program is doing that.
I have added my code snippet which is not the current working code. I am out of access to my current code. But instead I have attached similar one. You merely assume that the data is coming form serial read block.
Thanks for your efforts.
Attachments:
Excel.vi ‏11 KB

Adding data labels to column graph

I work in the financial industry and I have to add data labels to all bars that appear in my ten year performance graphs (see http://fundinvestor.calamos.com/ClosedEndFunds/CEFund.aspx?name=CHI under the "Performance" tab as an example). Is there a script that can do this? I saw there's this technique that Adobe offers for column totals: http://livedocs.adobe.com/en_US/Illustrator/13.0/help.html?content=WS714a382cdf7d304e7e07d 0100196cbc5f-619e.html but that's not working. What am I doing wrong? Adding data labels to bars is ridiculously simple in Excel, why can't I find the way to do it easily in Illustrator?

http://help.adobe.com/en_US/Illustrator/14.0/WS714a382cdf7d304e7e07d0100196cbc5f-619ea.htm l
That should do the trick.
Mylenium

Adding data to Manual Distribution Rule from DIAPI

Hi
I am searching for the object to insert the data to OMDR (manual distribution rule) using DI API. Can any one help me out.
I found many questions related to adding data to manual distribution rule using DIAPI which were not answered.
Thanks in Advance.

hi.
Just check the below posts.
object type of distribution rules
Distribution rules setup..

Adding data to multiple tables using one form in Access 2010?

Hi All,
I have a access database with two tables and I want to create a single form to enter data into that tables.
How to adding data to multiple tables using one form in Access 2010?
I don't have to much knowledge of access database?
Please help me
Thanks
Balaji

You really don't enter identical data into 2 tables. You enter dat into one single table, and then you have an unique identifier that maps to another table (you have a unique relationship between two tables).
Maybe you need to read this.
http://office.microsoft.com/en-001/access-help/database-design-basics-HA001224247.aspx
Think about it this way... What is you update data in 2 tables, and then the data in one of those tables changes, but the data in the other table does NOT change. WHOOPS!! Now, you've got a BIG problem. For instance, you have a customer
named Bill Gates. In one Table you update Bill's address to 1835 73rd Ave NE, Medina, WA 98039 and in the other table you accidentally update Bill's address to 183 73rd Ave NE, Medina, WA 98039. Now you have 2 addresses for Bill. Why would
you want that??? Which is right? No one knows. If you have one address, you just have to update one address and if there is a mistake, you just have to update one address, but you don't have to waste time trying to figure out which is right
and which is wong...and then update the one that is wrong.
Post back with specific questions.
Knowledge is the only thing that I can give you, and still retain, and we are both better off for it.

Adding data in internal table using extracted data

Hi Experts,
Good day!
I have a requirements in our historical data of material price which adding data that are not existing based on data extracted from standard tables such as A004 and KONP.
Now, i need to use the VALIDFROM (DATAB) value as basis for the latest price.
To make it more clear, see the example below:
Extracted data:
Material Number      Valid From       Valid to          Price
100101                   01/01/2008      02/01/2008     100.00
100101                   02/02/2008      04/02/2008     100.00
100101                   04/03/2008      08/01/2008     200.00
100101                   08/02/2008      01/31/2009     300.00
100102                   05/02/2008      07/01/2008      10.00
100102                   07/02/2008      10/31/2008      15.00
100102                   11/01/2008      01/31/2009      20.00
Output:
Material Number     Calmonth        Price
100101                 01/2008           100.00
100101                 02/2008           100.00
100101                 03/2008           100.00
100101                 04/2008           200.00
100101                 05/2008           200.00
100101                 06/2008           200.00
100101                 07/2008           200.00
100101                 08/2008           300.00
100101                 09/2008           300.00
100101                 10/2008           300.00
100101                 11/2008           300.00
100101                 12/2008           300.00
100101                 01/2009           300.00
100102                 05/2008           10.00
100102                 06/2008           10.00
100102                 07/2008           15.00
100102                 08/2008           15.00
100102                 09/2008           15.00
100102                 10/2008           15.00
100102                 11/2008           20.00
100102                 12/2008           20.00
100102                 01/2009           20.00
Text that are in bold are the added data. What is the best code to do with this?
How can i come up with this output? Help me please
Thanks and Godbless,
nips

Hi Nips,
Logic shud b sumthing on similar lines
lv_count = 1.
Loop at itab into watab.
if lv_count > 12.
lv_count = 1.
endif.
if watab-date+0(2) = lv_count.
append watab to gt_output.
continue.
else.
concatenate lv_count sy-datum+4(4) into watab-date.
append watab to gt_output.
endif.
endloop.
Best regards,
Prashant

Adding Data in the grid

One thing I am finding a little awkward; Adding data in the grid. It would be nice to be able to use tab to get to the next cell. At present it just highlights the cell and typing doesn't do anything until the cell is clicked. Equally hitting return I would expect it to give me a new blank row. I would like to be able to add a couple of rows of data without resorting to using the mouse at each turn.
Very good initial impressions though.

Yes we should do this as it's what everyone will expect from Excel.
-kris

Adding data from one matrix to another

Hay guys.I'm having trouble with adding data, that is situated in a Matrix on form A and bound to a userdatasource,
to a Matrix on form B that is bound to a dbdatasource.
For some reason the data either does not display at all, or it only displays the last records' data as many times
as there are records in the original matrix from form A.
Here's the code I've tried: (Displays only last record x times)
For i = 1 To oMatrixSync.RowCount
oFormTime.DataSources.DBDataSources.Item("@TB_TIMEDET").SetValue("U_Activity", _
                          oMatrixTime.RowCount, _
                          oFormSync.DataSources.UserDataSources.Item("U_Act").ValueEx)
oMatrixTime.AddRow()
next
And this code displays zip:
For i = 1 To oMatrixSync.RowCount
oCheckBox = oMatrixSync.Columns.Item("c_Check").Cells.Item(i).Specific
If oCheckBox.Checked = True Then
    oEditS = oMatrixSync.Columns.Item("c_Activity").Cells.Item(i).Specific
    oFormTime.DataSources.DBDataSources.Item("@TB_TIMEDET").SetValue("U_Activity", _
               oMatrixTime.RowCount, _
               oEditS.Value)
oMatrixTime.AddRow()
oMatrixTime.LoadFromDataSource()
next
Any help would be greatly appreciated, thanx all!
Message was edited by: Tjaard Du Plessis

Thanks, Jaro!
You are right. The code should look like this:
Dim oDBDSTime As DBDataSource = oFormTime.DataSources.DBDataSources.Item("@TB_TIMEDET")
Dim oUDSSync As UserDataSource = oFormSync.DataSources.UserDataSources.Item("U_Act")
For i = 1 To oMatrixSync.RowCount
oMatrixSync.GetLineData(i)
oDBDSTime.InsertRecord(i)
oDBDSTime.SetValue("U_Activity", _
                    i, _
                    oUDSSync.ValueEx)
Next
oMatrixTime.LoadFromDataSource()
Regards,
Frank

Adding data source-JDBC

Hi Guys,
I have another problem on adding data source on EID. When I try adding a data source on EID as a JDBC source I get error that says "Could not establish a connection"..Do you tell me step by step what I have to do when I add a data source on Endeca? My data has based on SQL 2008.

The Studio Administration and Customization Guide includes the information on creating and managing data sources.
Adding and editing data sources in the Data Source Library
I don't know anything about the specific format of a connection URL for SQL 2008. That should be fairly standard, though.

Adding data dynamically to JTable with a filter - getting error

Hello,
I am using JTable, and adding data and displaying it worked fine
until I tried adding a filter,
can anyone tell me what am I doing wrong or
why am I getting this Error?
The Error message
Exception in thread "AWT-EventQueue-0" java.lang.NullPointerException
        at javax.swing.DefaultRowSorter.convertRowIndexToModel(DefaultRowSorter.java:501)
        at javax.swing.JTable.convertRowIndexToModel(JTable.java:2620)
        at javax.swing.JTable.getValueAt(JTable.java:2695)
        at javax.swing.JTable.prepareRenderer(JTable.java:5712)
        at javax.swing.plaf.basic.BasicTableUI.paintCell(BasicTableUI.java:2075)
        at javax.swing.plaf.basic.BasicTableUI.paintCells(BasicTableUI.java:1977)
        at javax.swing.plaf.basic.BasicTableUI.paint(BasicTableUI.java:1773)
        at javax.swing.plaf.ComponentUI.update(ComponentUI.java:143)
        at javax.swing.JComponent.paintComponent(JComponent.java:763)
        at javax.swing.JComponent.paint(JComponent.java:1027)
        at javax.swing.JComponent.paintChildren(JComponent.java:864)
        at javax.swing.JComponent.paint(JComponent.java:1036)
        at javax.swing.JViewport.paint(JViewport.java:747)
        at javax.swing.JComponent.paintChildren(JComponent.java:864)
        at javax.swing.JComponent.paint(JComponent.java:1036)
        at javax.swing.JComponent.paintToOffscreen(JComponent.java:5122)
        at javax.swing.BufferStrategyPaintManager.paint(BufferStrategyPaintManager.java:277)
        at javax.swing.RepaintManager.paint(RepaintManager.java:1217)
        at javax.swing.JComponent._paintImmediately(JComponent.java:5070)
        at javax.swing.JComponent.paintImmediately(JComponent.java:4880)
        at javax.swing.RepaintManager.paintDirtyRegions(RepaintManager.java:803)
        at javax.swing.RepaintManager.paintDirtyRegions(RepaintManager.java:714)
        at javax.swing.RepaintManager.seqPaintDirtyRegions(RepaintManager.java:694)
        at javax.swing.SystemEventQueueUtilities$ComponentWorkRequest.run(SystemEventQueueUtilities.java:128)
        at java.awt.event.InvocationEvent.dispatch(InvocationEvent.java:209)
        at java.awt.EventQueue.dispatchEvent(EventQueue.java:597)
        at java.awt.EventDispatchThread.pumpOneEventForFilters(EventDispatchThread.java:269)
        at java.awt.EventDispatchThread.pumpEventsForFilter(EventDispatchThread.java:184)
        at java.awt.EventDispatchThread.pumpEventsForHierarchy(EventDispatchThread.java:174)
        at java.awt.EventDispatchThread.pumpEvents(EventDispatchThread.java:169)
        at java.awt.EventDispatchThread.pumpEvents(EventDispatchThread.java:161)
        at java.awt.EventDispatchThread.run(EventDispatchThread.java:122)I am also using my own class that extends "AbstractTableModel"
as TableModel,
public class MyTableModel extends AbstractTableModel {
    ArrayList<TableData> tableData=new ArrayList<TableData>(10);
    String[] columnNames=new String[]{"S/N"," Time (mili)","SD","SA","SSAP","DA","DSAP","FC","DATA"};
    public void addRow(TableData data){
        tableData.add(data);
        fireTableDataChanged();
    @Override
    public int getRowCount() {
        return tableData.size();
    public TableData getRow(int i){
        return tableData.get(i);
    @Override
    public int getColumnCount() {
        return columnNames.length;
    @Override
    public String getColumnName(int col) {
            return columnNames[col];
    @Override
    public Object getValueAt(int rowIndex, int columnIndex) {
        return tableData.get(rowIndex).getValue(columnIndex);
    }The Row Filter class
class myRowFilter extends RowFilter<MyTableModel,Integer>{
        @Override
        public boolean include(Entry<? extends MyTableModel, ? extends Integer> entry) {
            // Entry < SomeCostumTableModel , Integer> entry   ; Integer =Identifier= Row Number
            boolean frame_type;
            MyTableModel model=entry.getModel();
            TableData data=model.getRow(entry.getIdentifier());
            frame_type=((SD1&&data.SD==TableData.SD1) ||
                                         (SD2&&data.SD==TableData.SD2) ||
                                         (SD3&&data.SD==TableData.SD3) ||
                                         (SD4&&data.SD==TableData.SD4) ||
                                         (SC&&data.SD==TableData.SC) );
           return frame_type;
    }and How I add the filter to the Table
    private MyTableModel myTableModel=new MyTableModel();
    private RowSelectionListener rowSelectionListener=new RowSelectionListener();
    TableRowSorter<MyTableModel> sorter=new TableRowSorter<MyTableModel>(myTableModel);
    private FilterFrame filterFrame=new FilterFrame(this);
    // then in the constructor of the main frame
    // I call this
        sorter.setRowFilter(filterFrame.filter);
        MainTable.setRowSorter(sorter);
        sorter.setSortsOnUpdates(true);Edited by: YellowMurdoch on Nov 17, 2009 6:31 AM
Edited by: YellowMurdoch on Nov 17, 2009 6:31 AM

Thanks for noting that.
you mean like this?
public void addEntry(TableData data){
        myTableModel.addRow(data);
        javax.swing.SwingUtilities.invokeLater(new Runnable(){
            @Override
            public void run(){
                    myTableModel.fireTableRowsInserted(0,0);
    }both work,
would putting "invokeLater" inside "addEntry" somehow mess other things?
i guess that means addRow() is not supposed to update the table graphically?
Edited by: YellowMurdoch on Nov 17, 2009 9:30 AM
Edited by: YellowMurdoch on Nov 17, 2009 9:33 AM

Adding Data through LOV when LOV validation fails to bring row

Question on Adding data to LOV:
Just like in form 5(Professional Forms), Is there a way to dynamically insert the row to add data if the data entered is not in the LOV? I have searched forum and looked at Dev Guide but didn't find any notes. One way is making "AutoValidation" false so LOV will not fire and validate, THEN upon SAVE just commit trx. Will this work? or Is there a better thought. Thanks

Set the Disable Validation property of the LOV Item to "True"
Thanks,
Kumar

Excel upload data to planning book not working

Hello Gurus,
i have checked the online resources first before posting this thread here as this is most old topic relating to upload of excel data to planning book key figures.
Here is what i have done so far
1) from the planning book, i chose a view and downloaded the file to desktop and saved it as CSV. i populated the key figure values and saved the csv file as-is back to desktop
2) i had to remove the hdeader from the file as APO threw back an error that it could not interpret the period (header) as the number
3) when i took out the header i simply pasted the values and the file was ok
4) i went to planning book, loaded the file, checked the file and it said that the data was read and i clicked on upload the file
5) everything was green, then but i do not see the values in the grid of the planning book
what else i'm missing.
can someone please help me
thanks
Ravi

Hello DB and Ada. Thank you for your valuable suggestions. I know i might be missing something silly here. If i keep the header that i downloaded from the planning book into csv file, i get an error while uploading the file back to planning book that unable to interpret 11/2014 as a number.
P11/2014 is the header, Period 11/2014 is the fiscal period. we plan in fiscal periods.
if i take out the header from the csv file and just populate the key figure values, then i do not get any error when i load the file back to planning book, but then the values do not show up in the planning book grid.
i'm keeping the planning book in the change mode while uploading the file as i got that error saying that i need to keep the planning book in change mode for the file to load data properly to planning book.
Thanks
Ravi

Adding data to plan

Similar Messages

Maybe you are looking for