Adding date/time stamp to images

Hi all, we are working with multiples video sources with JMF. Now we need to add on each stream a date/time stamp and a name of the source camera.
Does someone knows how we can do it without manipulate each frame on each source ?
Thanks in advance and best regards.
Edoardo

Try the Premier Elements forum for video questions. You will get better advice over there. Good luck.
http://forums.adobe.com/community/premiere_elements

Similar Messages

Adding a Date/Time stamp to videos already created

We have someone using Elemets 8
They need to add in the date/time stamp to video's that are already created.
The camcorder we have does record this information but doesn't allow that information to be put onto the screen its a Canon HD HF200
We were told by Adobe support we can do this but they wanted $39 plus $39 an hour.
Anyone out there able to tell me how we can get this done for free

PrE lacks the TimeCode Effect (unless it has been added in PrE 10?), that both PrPro and Adobe After Effects has. However, even that Effect does not do date/time, just Runtime TimeCode, but with some display alternatives.
There are two programs called DVDate. One is/was freeware, and the other was inexpensive shareware. I do not have the two links handy, but believe that either will do what the user wishes.
I know that in the past, one valued contributor, Neale, has posted the links, and has also given the details of what each of the programs can, and cannot do. Maybe he'll drop by this thread, and fill in the blanks that I am leaving here.
Good luck,
Hunt

Adding the date/time stamp to videos already created

We have someone using Elemets 8
They need to add in the date/time stamp to video's that are already created.
The camcorder we have does record this information but doesn't allow that information to be put onto the screen its a Canon HD HF200
We were told by Adobe support we can do this but they wanted $39 plus $39 an hour.
Anyone out there able to tell me how we can get this done for free?

Try the Premier Elements forum for video questions. You will get better advice over there. Good luck.
http://forums.adobe.com/community/premiere_elements

Need to add date/time stamp to file name without time change creating new files

We have setup our application to save data once a trigger event occurs. We also need the date/time stamp as part of the file name. We used Format Date/Time String and concatenated it into the file name. It all works good, but as the time changes (seconds, minutes, etc.) it causes the Write to File to create a new file with the new filename. Is there a way to create the file and save/latch/buffer the time in the file name so that it doesn't create a new file for every second?
I've attached a shot of the relevant part of our VI. It's all in a big while loop. The data save is in a case/switch so that when it is triggered it starts saving. (The for loop is to split the data up
into 4 different files). Like I said, it all works except new files are created every second as the time changes instead of just putting it all in one file with the initial time in the file name.
Attachments:
TimeInFileNameQuestion.jpg ‏46 KB

I need a loop in order to use a shift register. I cannot stop the outer while loop (because it would stop the hardware from collecting data), and I cannot add loops inside which bogs down the processor to where the app stops. I've attached a simpler version of my VI which illustrates the problem. While the button is pressed (the trigger) it should save the data (in this case just cycle numbers) into one file with the initial date/time. But, you can see that it creates 1 file/second. I tried using shift registers, but without adding extra loops I can't see how to do it. Thanks
Attachments:
FileNameTest.vi ‏29 KB

Retaining AVI date/time stamp during capture to pre 9.

I have pre 9. When capturing DV from my camcorder, how do I get pre 9 to add the clips time and date to the avi file properties like it does for jpg's. What I get is the date I captured it to the computer. If I add "date taken" to the properties shown, it remains blank.
I realize the time/frame stamp changes throughout the clip but it should be able to show the initial date/time stamp, for example. I sort these travel clips by oldest date first and need to be able to match them to their itinerary locations. I have a small freeware app that will strip the date/time stamp from the meta data and then I can adjust the time/date in "Organizer" but I have 100's of clips so I'd rather not go that way. I know there app's that will encode the date/time stamp visibly on the image during capture but I don't want that as I make DVD's from the clips. Do you have any advice or suggestions? I have Win 7, 64 bit, 3.2 ghz, 2 core. Thanks, Rob.

Premiere Elements won't do this.
You'll need a third-party program called DV Date, downloadable from the web.

Adding a time stamp

How do I add a time stamp to video clips using the date and time the video was taken?

GreenRoom
What version of Premiere Elements are you using and on what computer operating system is it running.
Premiere Elements (any version) does not have a built in feature for "adding a time stamp".
What you can do is use the DVDate Plug-in for Premiere Elements for that task. Please see
http://dvdate.ru/
Please read details of the DVDate Plug-in in Item 0014 of my Premiere Elements 12 Daily Discovery blog post
ATR Premiere Elements Troubleshooting: Premiere Elements 12 Daily Discoveries
We will be looking forward to news of the outcome.
Thank you.
ATR

Add Date/Time Stamp to Timecode Effect

The Timecode effect of CS5 Premiere Pro is a very useful feature. However, it is missing a Date/Time Stamp. I would encourage everyone to submit a feature request for this. I have enclosed one I submitted. You can cut and paste it into the Feature Request Submission Form.
Feature Request Submission Form
Feature Request: Add Date / Time Stamp to Timecode Effect
The Timecode effect of CS5 Premiere Pro is a very useful feature. However, the Timecode effect is missing the ability to also display the Date/Time Stamp from Premiere captured video. This is a very important feature to include. Many videographers are archiving their miniDV tapes as AVI files since disk prices have become affordable. When I retrieve archived AVI files, I often need to look at the Date/Time Stamp, but unfortunately, Premiere does not offer that ability.
I would encourage you to add Date/Time Stamp capability to the Timecode effect so timecode, date, and time could be displayed all at once, or selectively picked via checkboxes.
Others in the Premiere forum have requested this capability.
Date / Time Stamp - Premiere CS4
http://forums.adobe.com/message/2564766
Hopefully, you could add this as an update to CS5. And hopefully, as soon as possible. Thanks

I am fairly new to Adobe CS6 however I have to totally disagree with some of the replies here on this subject. The package cost me well over £1200 and I expect a say in improving it along the way if I am to progress on to CS Cloud. The suggestion that engineers could spend their time elswere is total rubbish,its what they are well paid for..to listen to consumers suggestions and act on them (I am paying for their time). I would for one love to see the simple add in plug where the original date/time code could be added and burned into the video timeline. It is obvously not something needed by all but for some it could be essential. For my work I entirely rely on the original date/time code to be visible and burned in. My work is editing surveilance video and I also have to pixellate all faces of young persons so the addition of a date and time code plug in is something I would like to see in After Effects and Premier. Adobe add hundreds of filters/plug-ins that nobody in the world are likely to ever see or use or even asked for, so I cant't see why it would be a big task for them to include it in CS6 or Cloud for the future, especially as many ask for it.
On the suggestion of DVMPro, yes this is an excellent package which I already use along with vATS (which is quicker), however the big downside for both these programmes is they do not combine the clips so if I put in 60. mts clips I will get out 60 clips of what ever format I picked (limited to AVI/Wmv/AVCHD). You would then need combine and re-render the clips or work along the timeline with lots of clips (obviously not in AE as it wont combine clips along one layer....at least I cant see a way to do it (no doubt will be flamed on that one)
Sony vegas 11 also does not have the capability neither to add and burn in the original timecode however there is an excellent and tiny .dll third party extension called SVDTS that will add the original time/date/seconds to the timeline and burn in to the video. My point on this comparison is that it would not take a lot of time and work for a capable Adobe enineer to develop and implement such a plug in.
A crude way and free to actually achieve this is to use Freemake Video Converter, add all your .mts (or what ever format they are so long as its original), turn on the Subtitle 1 option for each clip (no batch turn on Im afraid) and chose to join the clips for output to what ever file format you choose. The original timecode and date will be on your output video clip, not as pretty as DVMPro or vAts but is there and accurate.

HCM Process & Forms: Date & Time Stamp issue in Prev Comments Box

Hi
We implemented HCM Process and Forms and we are in EHP4. We need user name, date and time stamp in each step for audit purpose.
Form Process Example:
Step1: Manager -> Initiates a Form for employee pay/position changes (REQUEST)
Step2: 1-Up Manager -> Approves a Form for employee pay/position changes (APPROVE)
Step3: HR Admin -> Process a Form for employee pay/position changes (PROCESS)
Process Overview: HR Admin can open a form once all steps are completed and they want to see all 3 steps date & stamp here.
New Comments -> To enter user comments in each step. Used data type HRASR_CURRENT_NOTE
Previous Comments-> To display prev. step / user's comments including user name, date & time. Used data type HRASR_PREVIOUS_NOTES.
I tried all different property settings in the form. May be I am still missing some property settings here.
Issue: If user enters any comments in "New Comments" box then only date & time stamp is coming along with their comments in "Previous Comments" otherwise not showing anything, just blank in the Prev. Comments. I added some code in form script in case no data in "New Comments" then default a value ":" . It is working fine for first step but not working the same for other 2 steps.
Trying in different way:
Creating 3 text fields in a form just for display purpose and modifying each field (data set) with some text (combination of user name, system date and time) at each stage/step in a BADI.
Method: IF_HRASR00GEN_SERVICE~DO_OPERATIONS
Here it is updating correctly for first step/stage (REQUEST) and other 2 fields are not updating accordingly. I did debug for each step and updating the data set correctly but finally not dispalying the valuse in a form except first field.
Can someone please share your ideas or inputs.
Appreciate your time & help!
Thanks
Hari

Hi Sahir
Thank you for your reply.
As I explained in my post, user details with date & stamp are coming when user enters some comments otherwise it is blank., All users may not enter comments because it is not a "required".
HR is needed this for audit purpose, just at end of the process they need to see all user names, date & stamp in the form. Forget about comment boxes, Can't we make just simple text fields with user details for each step (all 3 stages)?
FYI:
Issue: If user enters any comments in "New Comments" box then only date & time stamp is coming along with their comments in "Previous Comments" otherwise not showing anything, just blank in the Prev. Comments. I added some code in form script in case no data in "New Comments" then default a value ":" . It is working fine for first step but not working the same for other 2 steps.
Appreciate your inputs !
Thanks
Hari

Update file date/time stamp using java

Let me explain you what I am going through:-
I have created a java based installer using Jexpress tool and after I do the installation of my files, the files takes the current date rather then taking the date when it was created or modified.
Everything goes into JAR and I heard that Jar file do not retain the date/time stamp of the file.
I would like to know if we can change the date and time stamp of the files using Java.
Is there any method to do that or can we do this by writing the java class?
Thank You
Mehul

Did you check it?
I did.
$ jar cvf ~/ui *.m3u
added manifest
adding: Amollhgv.m3u(in = 42) (out= 24)(deflated 42%)
adding: Brand1.m3u(in = 56) (out= 27)(deflated 51%)
adding: Brand2.m3u(in = 42) (out= 24)(deflated 42%)
adding: Brand3.m3u(in = 42) (out= 24)(deflated 42%)
adding: Brand4.m3u(in = 42) (out= 24)(deflated 42%)
adding: Brand5.m3u(in = 42) (out= 24)(deflated 42%)
adding: Brand6.m3u(in = 42) (out= 24)(deflated 42%)
adding: Edurhgv.m3u(in = 42) (out= 24)(deflated 42%)
$ unzip -l ~/ui
Archive: /home/ijbalazs/ui
Length     Date   Time    Name
        0 12-04-03 17:53   META-INF/
       71 12-04-03 17:53   META-INF/MANIFEST.MF
       42 08-26-02 01:03   Amollhgv.m3u
       56 11-22-98 01:15   Brand1.m3u
       42 08-26-02 01:04   Brand2.m3u
       42 08-26-02 01:04   Brand3.m3u
       42 08-26-02 01:04   Brand4.m3u
       42 08-26-02 01:04   Brand5.m3u
       42 08-26-02 01:04   Brand6.m3u
       42 08-26-02 01:04   Edurhgv.m3u
      421                   10 files

Need to change Date/Time stamp on jpeg file

I combine images into panoramas using PTGUI. The problem is that the output image file is date stamped as the time that I created the image. I really want the date/time stamp to be the same as the images that go into the panorama. I cannot find a way in LR to change this.
Lee

> By the way, Victoria, should you be promoting your url here? It belongs in your profile. It's in the forum rules somewhere and others have been picked up on it before.
>
> Joe
Oh, thanks Joe, I'll change that then. I did go looking for forum
rules, but couldn't find any!
Victoria

Video and photo date&time stamp (nokia 5800)

Hi,
i have the nokia 5800 and i'm having a strange problem.
i had to format my memory card so i copied everything to my pc, and after i formated it i copied everything back to the memory card.
now if i open an image and check to see the date it's showing me the date and time i copied the file back to the memory card instead of the date&time i took the image.
same thing with the videos.
i have the same photos in my pc and when i check the exif data i can see the date when i took the photo.
i opened the videos with "media player classic" and i looked for the "media info", and i can see there when the video was made but it's in UTC time.
how can i make the phone read the correct time when the images and videos were taken?
Thanks for any help,
Erez.

Sach1n wrote:I want to put Date & Time Stamp on photos clicked via Nokia 5800XM. Is it possible?
Hi Sach1n
Unfortunately that is not feasible but you can view the EXIF Data on the 5800XM with a python application as per screenshot here:http://i35.tinypic.com/ht9ovs.jpg
Happy to have helped forum in a small way with a Support Ratio = 37.0

Can we sign a PDF with AD ID & date & time stamp?

Can we sign a PDF with AD ID & date & time stamp?

So what you really want is for your signature's appearance to contain user's ID and signing time. To do that you sign PDF with a regular digital signature and apply custom appearance to it. The "Sign" dialog contains "Appearance" field that has a drop-down list on the right which lists all available appearances and a "Create New Appearance" button. The standard/default signature appearance already contains signing time. You can create a custom appearance that includes additional information that you want to appear there. If you want your username to appear in the signature appearance you create an image file that contains your username and add this image to your custom appearance.
Multiple users can definitely sign the same PDF. Usually the signing certificate owner's name appears in the certificate itself and is included in the standard/default signature appearance. This is not Windows username but still identifies the signer, IMO better than Windows username. I do not think you want to disclose your password by placing it in the signature appearance.
You keep mixing two completely different and unrelated concepts: authentication and signing. I still do not understand what exactly you mean by "authentication". It has nothing to do with signature.

How to print date & time stamp on photos?

How to print date & time stamp on photos?

Three methods:
File>process multiple files>labels. Be sure to uncheck "same as source", or the originals will be overwritten. It is best to work on duplicate files, esp. while learning.
Use the horizontal or vertical type tool to add the information manually to each picture file
If the same information is to be applied to several pictures, e.g. a copyright notice, use of a brush made in PSE is very efficient

The export file from a calc script - naming and date/time stamp

Here is a simple calc script to export data.
2 questions:
1. Is there an easy way to add a date/time stamp on the name of the data file so that it does not overwrite the older ones every time?
2. I tried to specify the path so that it write to another server. "\\mfldappp011\E:\Exp_AW.txt". It's not working. How should I specify the path ?
Fix (@Relative("Yeartotal",0),"Actual","Working",&ActualYear);
Dataexport "file" "," "C:\Exp_AW.txt" "#MI";
EndFix;
Edited by: user9959627 on Sep 7, 2012 11:25 AM

Probably easiest to call the maxl script from a command line script, then rename the exported file to include the tme stamp and copy/move it to a location.
Cheers
John
http://john-goodwin.blogspot.com/

How do I to get the date/time stamp back on my texts in ioS7?

I've looked and looked to find an option and I can't seem to locate one. Does anyone know how to put the date/time stamp back...? It does appear in, but not consistently.

Swipe right to left and they will appear as you need them.

Adding date/time stamp to images

Similar Messages

Maybe you are looking for