Adding DNS server and Domain to Call Manager 9.1.1

I am removing this Post, Thanks to all the replies

The name pretty much says it all, cluster reboot, start by your PUB, wait until it comes up, next TFTP(s) wait until fully up, next SUB1, wait until fully up, and repeat until you've rebooted all servers in your cluster.
HTH
java
if this helps, please rate
www.cisco.com/go/pdihelpdesk

Similar Messages

My domain add WWW will redirect to DNS server's Domain, IE works ok,What's the reason

I have a website, and I had added both @ and WWW A record on host. I set the domain as the home page, They all work ok in IE, WWW failed work in Firefox. What are the reasons?
//My domian is http://www.hey-deals.com, hey-deals.com works fine, but http://www.hey-deals.com cannot work in Firefox! It redirect to DNS server's domain, how to set?
Thanks!

I have Windows capability but have never used it. I can't imagine anyone using anything other than Pages for Word Processing, etc. I use Safari and Firefox for Browsing. I use Safari primarily and Firefox occassionally. I have not used Internet Explorer for years and years. In fact, I was sort of surprised when I learned that some people do still use Internet Explorer.
I wasn't sure whether or not there was an Ultra-Safe way to go about checking to discover whether or not Apple Users had to worry about a problem with this particular bug.
Although there IS a link provided in the Denver Post's on-line version of this particular news article, I hated to click on a strange link - even if it was provided by the local newspaper. It is just as easy for the local newspaper to be fooled by bogus links as it is for anyone else to be fooled.
My understanding from friends is that there are a whole lot of local newspapers - all across the country - who are currently running this news article - or an article very similar to it.
So it would seem to me that a whole lot of Apple users all across the country might suddenly be wondering whether or not they have anything to worry about - and whether or not there was an Ultra-Safe way for Apple users to check all of this out.
I contacted my service provider about this issue but, so far, have not heard anything back from them.
Thanks for the response.
Sincerely,
Hannah

TS1843 I am getting the following error messages- No DNS Server and Double SAT. Can anyone walk me through a fix?

Airport Express- No internet connection. I am getting the following error messages- No DNS Server and Double SAT. Can anyone walk me through a fix

Try putting these numbers in Network>TCP/IP>DNS Servers, for the Interface you connect with...
208.67.222.222
208.67.220.220
Then Apply. For 10.5/10.6 Network, highlight Interface>Advanced button>DNS tab>little + icon.
Might also put them in the Airport Express, no idea what Double SAT is!?

I need help authenticating my outgoing server settings in setting up my work email on my Galaxy S5. It says unable to authenticate or connect to server and I even called helpdesk at my email support and they tried every possible port (80, 25, 3535 or 465

I need help authenticating my outgoing server settings in setting up my work email on my Galaxy S5. It says unable to authenticate or connect to server and I even called helpdesk at my email support and they tried every possible port (80, 25, 3535 or 465 SSL) and none of them work. Please help!

You will need to get the required info to create/access the account with an email client from your school.
Are you currently accessing the account with an email client on your computer - if you have a Mac with the Mail.app, or if you have a PC with Outlook Express, etc.? If so, you can get the required account settings there.

Dns server and client in java

Hello!
Im trying to code a dns server and client in java.
It`s supposed to be a very simple one. The server should just resolve the query, started from the client.
Where can I find any code samples? It would really help me to get started.
Thank you very much!
Anne

Do you have some code ?

Internal DNS server and NAT routing issue.

Hi -- I am not terribly experienced with DNS and I am running into an issue that I can't seem to resolve. My company.com DNS information is hosted by an outside ISP for email, web, etc... but I have configured an A record there to point to the public IP to my mac os x server (server.company.com).
We have a cisco router configured with one to one NAT from the public IP to the internal IP for our server in a 192.168.15.x subnet. The same router is running DHCP and and NAT on that subnet under a different public IP provided by our ISP.
Our server is running DNS with recursion and has a "company.private" zone set up for internal services and machine names. Thus, the server is accessible via "server.company.com" from the outside and "server.company.private" from the private LAN.
The problem is that I would like to be able to access some services simply via "server.company.com" both inside and outside the private network. Now, accessing the "server.company.com" services from the private lan does not work because the name resolves to the external IP and the external IP cannot be used internally due to NAT.
Is there a way to configure my internal DNS server to respond with the appropriate private address when receiving a query only to "server.company.com" and forward requests on for anything else on "company.com"?
I know that I could manually duplicate all entries for our domain from my ISP and host the same entries for internal clients, but it would be much easier to only have our server handle requests for itself. The server is running OS X Server 10.4.11.
Thanks

Is there a way to configure my internal DNS server to respond with the appropriate private address when receiving a query only to "server.company.com" and forward requests on for anything else on "company.com"?
Ordinarily, no. Once your server thinks it is responsible for a zone (e.g. company.com) then it will answer all queries for that domain and never pass them upstream. Therefore you'd have to replicate all the zone data, including all the public records, and maintain them both.
The one possible exception to this (I haven't tried) is to create a zone for server.company.com that has your internal address. In theory (like I said, I haven't tried this), the server should respond to 'server.company.com' lookups with its own zone data and defer all other lookups (including other company.com names since they're not in a zone it controls). Might be worth trying.

Adding namespace server and replicating folder structure

Not sure if this is the correct forum. @mod, please redirect if applicable.
When adding a second or subsequent Namespace server to a DFS Root, how is the virtual folderstructure replicated when that server is added?
The folder-targets are stored in AD under the System container. However, folders (to create a sensible hierarchy) are not stored in AD. Where do they come from when a new Namespace server is added ?
Regards, Marcel

To answer your first question go to the link below.
Overview of DFS Replication:
http://msdn.microsoft.com/en-us/library/cc771058.aspx
As for your second question review the answer below.
Stand-alone and domain-based DFS namespace servers store DFS-related information in the registry. All namespace servers also store a copy of the namespace structure on a local volume on the server in DFS root folders and link folders as follows.
Does this answer your questions?
Reference used:
DFS Namespaces: Frequently Asked Questions
http://technet.microsoft.com/en-us/library/ee404780(v=ws.10).aspx

Windows server 2012 as primary DC and DNS server and windows server 2003 as secondary DC and DNS

Migration from windows server 2003 AD DC and DNS server to windows server 2012 R2,
Cannot I set up Windows server 2012 R2 as primary DC and DNS , windows server 2003 as secondary DC and DNS ? (for backup server when server 2012 fail, user can continue to login and access internet services)

You can mix both as long as your Forest and Domain Functional level are Windows Server 2003. However, I would like to bring your attention to this blog about known problems when mixing DCs with Windows Server 2003 and 2012 R2 OS:
http://blogs.technet.com/b/askds/archive/2014/07/23/it-turns-out-that-weird-things-can-happen-when-you-mix-windows-server-2003-and-windows-server-2012-r2-domain-controllers.aspx
This posting is provided AS IS with no warranties or guarantees , and confers no rights.
Ahmed MALEK
My Website Link
My Linkedin Profile
My MVP Profile

Installed Server, Got certificate added in server and Mac keychain. Can't Send Mail

Hi,
I dove into server tonight. In a fit of overconfidence, I installed it on my main Macintosh as it is the only compatible machine. I wanted to run it while doing other things so i put it on my main login. I got a certificate from my Godaddy account and got it installed on server. I quit server and opened Mail and I cant send mail as it is trying to use the new certificate I believe. I downloaded and added the certificates to keychain and I see them.
The Message: An error occured while trying to sign this message with a certificate from "$%^[email protected]". Verify that your certificate for this address is correct and the private key is on your keychain.
How can I either make the certificate work for mail, add the private key to my keychain or delete the key so that mail uses whatever it was previously using?
Thanks A Million!
V

cPragman,
I surely could be confusing the two. I actually didn't want to do anything with mail in server yet. I installed server. Spent some time trying to get it set up, quit server and returned to my normal (client) work. I tried to send an email from my main account and got an error message in the client mail app referring to the certificate.
The Message: An error occured while trying to sign this message with a certificate from "$%^[email protected]". Verify that your certificate for this address is correct and the private key is on your keychain.
I have had the domain name and the cretificate came in that package. I was not even going to make it available to the outside world for some time. I just wanted the server up so i could practice working with it. I am moving from strictly creative IT (logic, Pro Tools etc.) to an environment that is more corporate and requires a bit of server knowledge. Luckily i have a bit of time to learn about it. i am obviously clueless as of now.
Sincere thanks for your help.
V

How to get Scavenged Records from Windows DNS Server uisng WMI API Call?

Hi Guys,
I'm facing one problem to find below things,
DNS Server have list of zones and each zones may have DNS Records. DNS Server provides an option set scavenging interval on server or in zone level.
Once records are old the server automatically apply scavenging process to remove that record.
I need to get DNS Records that are scavenged and timestamp using WMI Call?
sharavanna

The DNS log has this information. Just extract it from the log.
A scavenged record does not exisit when it is scavenged so it cannot be read from the DNS server. It has been deleted.
¯\_(ツ)_/¯

VPN Client is not adding DNS server IP addresses

Hello all,
I'm new to the forum and could use a little help.
I use a CheckPoint VPN-1 to connect to my work network. The problem that I have is that I need to add two name servers to access the various sites and applications at work. I have not been able to find a way to do this within VPN-1. I found a listing in for DNS servers in the user.C file but as soon as I edit it and add them (and the edit back up so that it doesn't just over write my changes) it says the files are corrupt and reloads it from the network. What a pain.
Right now I am manually adding the IP address to my DNS list when I connect, then cursing when I use a browser after dosconneting, then removing them manually. If it were not for the fact that network access is dramatically slower when I'm not using the VPN and have the additional name servers listed, I would just leave them there and be done with it. But network performance seems to suffer dramatically when they are listed and the VPN is not active. As soon as I remove them, performance returns to normal.
What I need is a way to add two DNS Server IP Address when VPN-1 connects to the network and remove them when I shut down the VPN. I personally don't care if it's a separate utility, Automator Script, Apple Script, or even a different VPN client, as long as it will connect to a CheckPoint FW.
I have started looking at other clients. I have looked at PSecuritas, it connected to the FW fine, had a place to add the DNS IPs but did not add them correctly either. I also looked briefly at VPN Tracker, for $120 .... I don't think so ..... it's a hassle, not broken.
Any help would be appreciated.
--Ray

This is possibly CSCec68049 (see http://www.cisco.com/cgi-bin/Support/Bugtool/onebug.pl?bugid=CSCec68049&Submit=Search for details. 3.6 had a few issues with DNS servers not being populated. Try upgrading a few of your PC's to the latest 4.0 client and that should resolve it.

How can I override the DNS Servers and Domain Name used by my Airport Time Capsule?

The defaults picked up from my ISP's DHCP are to use the ISP's DNS servers and ISP's domain. I do not want this.
With my prior router I set the DNS servers to Google's Public DNS (8.8.8.8 and 8.8.4.4) and my domain to either "bannister.us" (which I own) or "bannister.home". I do not want simple names resolving to some ISP default. (Yes, I know exactly what this does.)
In the Apple AIrport Utility (version 6.3.2) the fields for DNS and Domain do not allow editing. (Why??)
Is there some way to override this?

Unfortunately not one that will work with the latest version TC.
The way around it is to use a different router.. It can be a very simple router.. I usually recommend units like the TP-Link WDR3600 as they take good third party firmware like gargoyle, openwrt, dd-wrt.. ie they have real controls and beyond that a proper Linux firmware with command line interface.
You can then change the TC over to static IP. It will not be the router.. but it will effectively become the local dhcp server.
I have adsl so I cannot reproduce your system.. I have a bridged modem.. a router.. AC66U.. and a TC.. but the TC is not in bridge.. it is in static IP mode.
Let me demonstrate.
By setting a range on the main router from 1-199 (leave a space.. ) so set the TC to 192.168.2.201 and then you can set DNS and domain as you like. Set the dhcp range (leave a space) you could use 203-253.. then I use the main router as 254.
It is brilliant.. all computers behind the TC receive the IP from the TC with whatever IP and dns (and domain although I haven't changed it).. Effectively the TC works as its own dhcp device.. but is merely a secondary dhcp server to the main unit.
(This gives me netflix which is why I do it.. from well outside the US).
It may be of use.
Why leave a space.. well it helps it to work.. I have not tested it but another person reported issues and found leaving a space .. ie last ip in the router.. 199, static ip 201.. first dhcp 203 (i used 205 to help me keep count!!). worked.. I have not tried to reproduce the problem.. so I reproduce the solution.. it might be like sheep jumping over the fence.. even if the fence was removed the sheep keep jumping over at the same place. Just say bahhh and do likewise.

Remove device and profile from call manager

Is there any documentation on how to remove phones and EM, RDP, CSF profiles from call manager in order to free up some licensing??

EM does not take any licenses, but the way you want to do this (assuming all associations are correct and dependencies would prevent you from doing it anyway):
delete UDP
delete CSF device
delete RDP
delete desk phone

NB200-13J - No response from DNS server and Gateway

Hi
I have netbook NB200-13J with XP SP3. Its impossible to connect in the internet wireless and the error messages are
THERE IS NO RESPONSE FROM DNS SERVER
THERE IS NO RESPONSE FROM DEFAULT GATEWAY
The connection with ethernet cable is ok withe the reltek adpter also the wirless adpter atheros ar9285 is enble, working properly and the signal from the modem router is strong.

Hi abk55,
From which program you receive this error message?
Have you tried another browser, e. g. Firefox or Opera?
I assume it has something to do with your WLAN card or WLAN settings if the LAN cable works properly. So you should try updating the WLAN driver from the Toshiba website.
Try also to disable the MAC address filter and use another encryption.

Adding menu items and making system calls in AfterEffects (AE,CS3)

We are looking to do the following things via javascript in AfterEffects CS3. It does seem straight-forward, but am unable to find a good reference or example.
* Add at startup a menu item under "File" (or similar main menu) and have it call a script function when clicked.
* Have a script make an external system call (to launch an external application/executable with a few parameters)
Any insights on how to achieve this?
Many thanks!

I wanted to see if there was any update on this, I'm writing a series of tools and would love to create a custom menu for quick and easy access.
If it turns out there isn't an "easy" way to do this (env variables, special directory locations, javascripts) would anyone know if access to the menubar is possible from the Plugin API?
I'm fairly new to After Effects, just getting up-to-speed on the environment now... seeing if I can duplicate the functionality of some old Nuke scripts in AE.
thanks,
Rick_

Adding DNS server and Domain to Call Manager 9.1.1

Similar Messages

Maybe you are looking for