Adding Effects to loops

Is there a way I can take a loop, split it, but only add the effect to the second part of the loop? For example I would need the effect to come in about a minute into the song but then I would need the effect to fade out. There are some other effects that I am using in the Master Effects that I don't need to have throughout the entire song as well. How can I control the effects?

Geez...all these people use Soundtrack and no one can answer my question?

Similar Messages

  • Adobe premiere pro for Mac, why is there no playback / severe lag after adding effects? What can I d

    I recently added effects to a number of clips in Adobe Premiere pro, now the playback has virtually stopped and is lagging. It will play for a mili second then pause.
    Computer information:
    Hardware Overview:
      Model Name:          MacBook Pro
      Model Identifier:          MacBookPro8,1
      Processor Name:          Intel Core i5
      Processor Speed:          2.4 GHz
      Number of Processors:          1
      Total Number of Cores:          2
      L2 Cache (per Core):          256 KB
      L3 Cache:          3 MB
      Memory:          4 GB
    Intel HD Graphics 3000:
      Chipset Model:          Intel HD Graphics 3000
      Type:          GPU
      Bus:          Built-In
      VRAM (Total):          384 MB
      Vendor:          Intel (0x8086)
      Device ID:          0x0126
      Revision ID:          0x0009

    With an i5 and only 4Gig of ram, your computer is under powered to edit HD video
    What are you editing, and what effects are you using?
    Report back with the codec details of your file, use the programs below... A screen
    shot works well to SHOW people what you are doing
    http://forums.adobe.com/thread/592070?tstart=30
    For Mac http://mediainspector.massanti.com/

  • Adding Effect (e.g shadow ) to image in Fxz files.

    Hi
    Can somebody show me how can I added Effect like shadow to images in the FXZ files ?
    Below is an e.g of FXZ converted by “JavaFX Production Suite” from a svg file produce by inkscape.
    I know an alternative is to edit the FXZ file.
    Thanks in advance.
    Fire-fly
    * Generated by JavaFX svg2fx tool.
    * Created on Thu Jun 03 23:35:13 SGT 2010.
    //@version 1.3
    FXD {
    content: [
    Group {
    content: [
    Rectangle {
    fill: Color.rgb(0xcc, 0xcc, 0xcc, 1.0)
    height: 37.142857
    id: "shaft"
    width: 462.85715
    x: 100.0
    y: 369.50504
    // effect: Glow {
    //   level: 0.5
    Group {
    content: [
    SVGPath {
    content: "m 251.42857,386.64789 a 50,54.285713 0 1 1 -100,0 50,54.285713 0 1 1 100,0 z"
    fill: Color.rgb(0xff, 0xff, 0x00, 1.0)
    id: "thumb"
    }

    Hi
    I am very new to javaFX.
    Try the following, but did not work.
    To change this template, choose Tools | Templates
    *and open the template in the editor.*
    package insertobject;
    import javafx.stage.Stage;
    import javafx.scene.Scene;
    import javafx.scene.text.Text;
    import javafx.scene.text.Font;
    import javafx.fxd.FXDLoader;
    import javafx.fxd.FXDNode;
    import javafx.scene.paint.Color;
    import javafx.scene.effect.Shadow;
    import javafx.scene.effect.Effect;
    var URL = "{__DIR__}slider.fxz";
    var shadow : Shadow;
        shadow.color =Color.BLACK;
        shadow.radius= 15;
        shadow.height =7;
        var fxdNode: FXDNode=FXDNode {
        url: URL
        backgroundLoading: true
        placeholder: Text { x: 10 y: 10 content: "Loading graphics ..."}
         loader: FXDLoader {
            onDone: function() {
                var layer1 = fxdNode.getNode("shaft");
                var layer2 = fxdNode.getNode("thumb");
                var rect = fxdNode.getShape("shaft");
                   rect.effect = shadow;
                layer1.translateX = 70;
                layer1.translateY = 100;
                layer2.translateX = 70;
                layer2.translateY = 100;
    Stage {
        title: "Application title"
        scene: Scene {
            width: 550
            height: 700
            //fill:Color.web("0x00001F")
            content: [
                fxdNode
    }Edited by: fire-fly on Jun 14, 2010 11:10 AM

  • Where do i find sound effects or loops ...

    Where do i find sound effects or loops?

    There was a Software Update yesterday that included a few hundred mb of sound FX - they appear as mentioned in the music and sound browser, accessed on the right where the two music notes are.
    If you've ever had iLife, there's a tonne more content in that too (the Jingles folder in particular contains loads of quite useful muzaky, copyright-free soundtracks in a wide range of styles).
    You can also add a whole folder of music as an event, and all the subfolder names are used as tags for the audio clips within it.  I did this before I realised the iLife stuff appeared in the audio browser.  It works well either way.

  • Adding 3rd party loops to the GB library (OSX)

    Hope anyone can throw some light on this.
    On the previous version of GB, I used to unpack the loops, select them as a group and drag to the Loops library in GB. This added them to the library catalogue with no problems so they could be selected, listened to and dragged into my tracks.
    I've upgraded to the latest version, however when carrying out the same process, only some are added and others will simply not appear in the library.
    Looking at the files, both are AIFF-C audio, both the same sample rate, both the same bits per sample and both the same duration. It's completely baffling me. Of the 509 loops I'm trying to add in this example, only 240 appear in the loop library. All will play in iTunes, so it doesnt appear to be file corruption at all.

    Hi Scott,
    I am not a developper and get access im May 2005 to this link: ftp://ftp.apple.com/developer/DevelopmentKits/Apple_Loops_SDK1.1.dmg
    If the link doesn´t work, please try Mac OS X, then Developer. Under Related Topics click on Music & Audio. And finally on Music and Audio Downloads. The last click on Apple Loops SDK 1.1 SDK et voilà.
    I hope this time will work
    Bye

  • Have Added Soundtrack Pro Loops. Now Need To Delete Greyed Out Duplicates?

    As you know, only half the loops come on the DVD and the rest have to be downloaded.
    The downloadable loops appear greyed out in the Loops Browser until you download them.
    I have added my Soundtrack Pro loops to the Loops Browser so now every downloadable loop is duplicated.
    One is playable (the STP one) whilst the other is greyed out.
    Is there any way of deleting the greyed out names?

    Ian R. Brown wrote:
    Is there any way of deleting the greyed out names?
    re-index them:
    http://www.bulletsandbones.com/GB/GBFAQ.html#reindex
    (Let the page FULLY load. The link to your answer is at the top of your screen)

  • Adding effects to a single note in Logic Pro

    Hi
    How would it be possible to add FX to a single note - for example one played at the end of a riff or melody - I've been trying to figure out a way of adding one to a single note in the piano roll format but am having no luck - can anyone please help?
    Thanks in advance
    Alex

    You need to distinguish between MIDI and audio a little. The piano roll is editing data about "notes" and "performances", but has nothing to do with audio as such. You can't add an "audio" effect to a "note" as such.
    Your notes and performances getting effectively translated into audio by the use of an instrument. So, a C3 note, played via a piano instrument, will result in the audio of a piano playing C3. Use a drum instrument, and the audio might be of a snare drum.
    So, you want to add an audio effect at a specific point in your song, corresponding to where a particular note plays. Either use automation to bring in that plugin/effect for that time (either directly on the instrument channel, or via busses/sends), or send that note to a separate track and instrument with FX set up to play only that note specifically.
    Lots of ways to do it. But remember, a "note" is an instruction to play something. It is not audio, and so you can't manipulate it with audio tools until it becomes audio (ie, in the mixer).

  • Video no longer plays after adding 'effects', it's audio only

    So I've used imovie 09 for months and everything has worked fine. Then today Iw as working on a video and added an effect to a clip and all **** broke loose. Now the video won't show up for every clip - it's audio only. I've tried closing imovie and restarting. I've even done a reinstall and EVERY other project and event works fine, it's just this particular video. I've created a whole new project, and even reimported all the video into a new event. But still when I add any effects to it, it'll play the title cards and the audio, but the video won't show up.
    PLEASE HELP. Of course I have a deadline. Smh...

    Try all these?
    Shane's Stock Answer #8: External Monitor Viewing
    CUTTING SO YOU ONLY SEE THE TROUBLESHOOTING THINGS
    If for some reason you can't view your timeline on your external monitor, there are a few things to try:
    1) Make sure that the camera/deck is connected and powered on BEFORE you open FCP.
    2) In the Final Cut Pro menu select AUDIO/VIDEO Preferences and make sure your signal is being sent out thru Firewire DV.
    3) Go to the menu and select VIEW>EXTERNAL>ALL FRAMES.
    4) Click in the % box above the image and select FIT TO WINDOW.
    5) Go to VIEW->refresh A/V devices
    6) Make sure the Log & Capture window is closed
    If you want it to play in both the canvas and the external monitor you need to go to the FINAL CUT PRO menu and select AUDIO/VIDIO settings and make sure MIRROR ON DESKTOP is selected under the PLAYBACK OUTPUT section.
    Shane

  • Premier cc 2014, whole program lags when adding effects

    I have a problem that began after updating to cc 2014.   I work on projects that tend to have long complex multi  cam sequences (3 to 4 cameras) embedded into another sequence. 
    Premier pro handles it great no problems, until I try to color correct...then the whole entire program lags, not just playback.  I will add an effect, and then have to wait 30 seconds to a minute to even access the effect controls.   When  I start trying to make adjustments ( using the three way color corrector or RGB curves) I have to wait 3-5 seconds for the adjustment to catch up with what I am doing.    Then when I click on another clip to apply an effect, I must wait 30 seconds to a minute again for premiere to allow me to make changes to this clip.
    This has NEVER been an issue for me on previous versions of premiere pro.  I used to be able to add color corrections without the whole program slowing down.
    I have found some work arounds.   Such as I make a brand new sequence, and then copy and paste all the clips from the onc sequence to the new one.  I can then make all my color corrections just fine.  After I am done color correcting I drag them back into the original sequence, and close that sequence and things go back to normal.  
    I thought perhaps this could be a hard drive issue, as I was editing from an external docking drive through USB 3.   So I opened up my computer and swapped out hard drives so that my media drive was connected directly thru SATA.   But nope this did not help, same issue. 
    The color corrections I make are fairly simple, I am just trying to match all the cameras to be the same,  so I may adjust saturation levels, or change the RGB levels so all the colors look the same.
    here are my computer specs
    Windows 8
    Intel I7 processor
    3.4 GHz
    8GB Ram

    Hi Matthew D,
    If it were me, I'd save color correction work to be done after the editing. Can you try flattening the final multicamera sequence, and then adding your color correction effects?
    If that's too much to ask, perhaps adding more RAM might help you with the workflow you'd rather deal with. As versions of Premiere Pro progress, more and more is required from you computer's resources—pretty much a fact of life. That might explain why it worked just fine earlier.
    Another explanation may have to do with the project files you are working with. Are they brand new 8.2 project files, or project files you started in 8.0 or 8.1? Updated project files might contain corruption, interfering with performance.
    Thanks,
    Kevin

  • Adding presumed APPLE loops to GB3/browser

    okay
    cut me a break here.
    I just downloaded about 30 Apple loops by Smart media.
    They are aiffs. Some have wavs.
    what are the exact intelligent steps to take to get these inside GB3 so that they are indexed and ready to be called up by typing their name? This is not as easy as you think.
    they are loops for electric guitar, bass and percussion.
    I have the appropriate folder in my HD. But what must i do to get them properly as per protocol to land inside the browser and be usable. Thanks for the lesson.
    ( I loaded them in the folders. I then dragged them onto the browser and they just cant be found )

    i work on a 2 computer set at home 1pc and 1 mac...on the pc i use acid and i have thousands of loops i love and i wanted to use on gb , so i put them on a disk and added them to my itunes folder so when i click on the eye icon on the lower right corner i can axcess these loops and add them to my songs..so i suggest mabe something like that

  • HEEEEEELPPPPP@!!!!!!! Missing GarageBand effects and loops i have jack?

    when i went to add some effects to an instrument track i have no garageband effects i have gay audiounit effects and thats it alot of my loops are missing. plus everytime i load garagebad it loads a gay keyboard tarck i can create a new track properly..... should i reinstall it and how do i reinstall i tryed getting an update but i have the lastest version. it used to be good why is it gay now

    Yeah dude this was a while back, I think what I did I went on Apple.com and downloaded GarageBand again. Just don't really remember but I think thts what it is.. you can email me at [email protected] I can probably help you when I'm on my laptop better. *follow me on instagram* jc_jaurigui

  • Recording with Quicktime and adding effect

    Hi all. I am recording Firewire video in Quicktime Player. The audio comes from a seperate source, through the line-in. To synchronize, I need to delay the audio by 600 ms. Does anyone have a method of doing so? I have an AU delay that would work. I just can't figure out how to apply it to the live lin-in.
    Thanks very much for any help.
    Jeremy

    I'll pass on some things I discovered, in case anyone has this question or anyone can add to this.
    I succeeded to some degree, by doing this:
    1. Installed Soundflower; this creates virtual sound inputs and outputs, so sound can be passed between applications.
    2. In GarageBand, I created a real instrument.
    3. Set input to Line-in
    4. Added the Voxengo Delay AU (http://www.voxengo.com/product/sounddelay) which is free and simple. The Apple AUDelay repeats the sound as well, rather than just delaying it (unless I missed something).
    5. Set GarageBand's sound output to Sountflower, and turned monitoring on.
    6. In QT player, new movie recording, with audio input set to "Soundflower".
    The good news is that I can save the GarageBand document, which can be opened and everything is immediately running. But, it would be nice if there was a way to add an effect to any input directly so that I only have to use one application.
    Any suggestions to streamline this? It is for an installation which will be run by students, so the fewer steps needed to set this up the better.

  • 16:9 with added effects becomes 4:3 when I export it.

    I have recorded some footage in 16:9, imported it in iMovie HD, edited it, added some effects, and now I´m trying to export the project to my camera. The problem is only that the parts where I have added an effect turns into 4:3 once I export it. The parts where I haven´t added an effect are still 16:9, which means it switches between 16:9 and 4:3 in the same project. In iMovie it is all 16:9, but obviously something goes wrong when I export it. Does anybody know why?
    I´ve also tried to make a quicktime file from the same project, and in this case the whole project turns into 4:3 - at least that´s how it appears when i play it in quicktime or VLC, for that matter. Any ideas what I could do to keep it 16:9?

    Welcome to the  Discussion Forums.
    There are no effects in im08 and suspect you are using an earlier version of imovie. You might get a better response if you post in the appropriate forum.

  • Adding Effect on an incoming H.263/RTP stream

    Hi,
    I am playing an h.263/rtp stream which is multicasted over a network. I want to play the file with rotation or some other effect added to it. I tried to see following link for some help(as the forums suggested):- http://java.sun.com/products/java-media/jmf/2.1.1/solutions/RotationEffect.html. But the link is disabled and new link which they are providing does not contain the example.
    Can any of me help me how to add the effect on h263/rtp.
    Though i already created my effect class and tried adding it. But could not add the effect.
    Kindly give me some directions.

    Is there some error in above code or if there is some other issue.There's an error in the above code because you're assuming I'm being imprecise with my language. I am not.
    You must copy the data from the input buffer to the output buffer...
    Buffer objects are wrappers around byte[], and you cannot copy data from one array to another by modifying the object references...which is what your code does.
    public int process(Buffer inBuffer, Buffer outBuffer) {
        // Make sure the output buffer will hold data
        if (!(outBuffer.getData() instanceof byte[])) {
            outBuffer.setData(new byte[inBuffer.getLength()]);    
            outBuffer.setLength(inBuffer.getLength());  
            outBuffer.setOffset(0);
        // Make sure the output buffer is long enough
        if (outBuffer.getLength() + outBuffer.getOffset() < inBuffer.getLength())) {
            int offset = outBuffer.getOffset();
            int length = inBuffer.getLength() + outBuffer.getOffset();
            byte[] oldData = (byte[])outBuffer.getData();
            byte[] newData = new byte[length];
            // Copy the previous data
            for (int i = 0; i < offset; i++) {
                newData[i] = oldData;
    // Set the variables for the output buffer
    outBuffer.setData(newData);
    outBuffer.setLength(length);
    outBuffer.setOffset(offset);
    // Copy the data from in to out
    int j = outBuffer.getOffset();
    for (int i = inBuffer.getOffset(); i < inBuffer.getOffset() + inBuffer.getLength(); i++) {
    ((byte[])outBuffer.getData())[j++] = ((byte[])inBuffer.getData())[i];
    return BUFFER_PROCESSED_OK;
    That's untested code above, fix my dumb mistakes as necessary.                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                           

  • Getting the error (23::46) when adding effects to comp

    Hi all,
    If I try to add effects like Text-->Numbers or Obsolete-->Basic Text to a solid in my comp, i get the following error message "After Effects error: could not convert Unicode characters.". I have done some research on this and found people that had the same issue when trying to import footage or images. I get the message just by starting a new comp adding a solid and then try to add the effects mentioned above, so their is no footage or image involved here.
    I`m running on Win7 Professional 64bit service pack 1 (english) and After Effects CC (12.2.1.5). I don`t think this is part of the problem but here are more hardware infos (just in case):
    - NVIDIA GTX 570
    - Intel Core i7 2600K
    - 16GB DDR3 Corsair (CMZ16GX3M4A1600C9)
    - ASUS P8P67 Mainboard
    I`m running AE cc on a Lenovo U310 aswell and do not have any issues there, so I assume something must be wrong with the OS or with AE on my main PC. Does anyone have a clue what`s wrong?
    Glad for any hint.
    Thanks Michael

    Thank you for your answear,
    The thing is though, I don`t try to open a project or import a file when the error shows up. I simply start AE, make a new comp, add a solid and then try to add the "Numbers" or "Basic Text" effect to that solid. I simply can not imagine how this has something to do with characters in any file name or path. It doesn`t makle sense to me.
    Any other ideas?
    Thanks Michael

Maybe you are looking for