Adding Epson printer

The driver for the Stylus CX-4800 is not included with the iMac. According to Epson, the bundled driver that IS included is not intended for the Intel iMac. So I downloaded and instlalled the proper driver from Epson. But I still can't figure out how to actually Add the printer. I can get the name Stylus CX-4800 to come up in the Print Browser, but the Add button will not become active until I select a driver from the pull-down near the bottom of the Browser box. The correct driver just doesn't show up there. Is there an easy (or any) way to make this happen?

The Epson people answered this. The key is to get rid of the Epson stuff that came packaged with the iMac.
Go to LIBRARY, then PRINTERS. Put the entire EPSON folder in the trash.Then go to the RECEIPTS folder and trash any EPSON receipts. Restart.
Go the Epson website, download and install the proper driver for the Intel iMac. Restart again. Then just go through the "normal" Printer Setup Utility procedure and the correct driver should show up when you pick your printer. If not, Epson support can give you the long version.
iMac (Intel) Mac OS X (10.4.6)

Similar Messages

Adding Epson Printer failed

does anyone know if printing to an Epson Stylus 4800 via AirPort Express is supported ?
Bonjour shows the printer but adding fails with some 9000 error code.
i used several mac with the same result.

Try resetting the printing system.
OS X Mavericks: Reset the printing system

Problem adding EPSON USB printer

I contacted Epson's support about this, then did what they told me to in the reply. As you can probably tell since I'm posting this, it didn't work. Here is the email I sent:
"No matter what I do I cannot get EPSON USB to show up under More Printers in Apple's Printer Utility. I can add the regular driver for the printer to my printers list just fine, but when I try to go into More Printers > EPSON USB to add the Border less and Minimized margins (like I had done previously on a PPC based Mac) the option for EPSON USB from the pull down menu doesn't show up. It only shows EPSON FIREWIRE and EPSON TCP/IP. I have tired reinstalling the driver, resetting the printer system and restarting. I have even reinstalled the whole operating system, but even on a fresh install (and the newest driver installed) EPSON USB still didn't show up in the pull down menu. Please help, I need to get border less printing working again.
I am using a Core2Duo MacBook Pro, Epson Stylus Photo 820, The newest version of the driver (downloaded January 1, 2007), and Mac OS X 10.4.8."
Here is what they returned and what I did:
"Thank you for contacting the Epson Connection.
If you are unable to add your printer even after a complete cleanout and
reinstall, please try the following steps to correct this issue.
1. Open Printer Setup Utility (HD > APPLICATIONS > UTILITIES).
2. At the top of the screen, click the words "Printer Setup Utility" and
choose "Reset Printing System" from the pull-down menu. Confirm resetting.
3. All existing printer listings will be deleted. Try adding your Epson
printer again.
This reset makes the operating system clear all jobs and queues and
reconnect to printer drivers currently in the system.
If the printer's plug-in still cannot be selected to ADD, try the following
as well:
1. Begin on the desktop with no windows open or applications running.
2. Go to FILE and down to FIND.
3. In the SEARCH IN option, select EVERYWHERE.
4. Under SEARCH FOR ITEMS WHOSE select NAME and CONTAINS from the drop
down menu.
5. In the search field type COM.APPLE.PRINT and click FIND.
6. Drag ALL the entries that it finds to the TRASH and empty it. Repeat
steps 2-5 to search again and confirm that all COM.APPLE.PRINT files were
removed. (The second search should have no results. If it does, drag the
results to the trash, empty the trash, and repeat the search a final time.)
7. Restart the computer and go back to the Printer Setup Utility to add
the printer. (Note: The COM.APPLE.PRINT preference files will be re-created
upon restart.)
8. After selecting ADD, you will receive a message stating "NEW PRINTER
DRIVERS DETECTED, WOULD YOU LIKE TO RELOAD THE BROWSER?" Click YES.
We would recommend reinstalling the driver and trying to add the printer.
If this fails - Please contact Apple for issues with the Printer Setup
Utility
If you require further assistance with this particular issue, please ensure
all of our previous correspondence is contained in your reply, so we can
better track the history of this issue.
If you have a different issue, please submit another E-form via our website
(http://www.epson.com), and we will respond in a timely manner. Thank you
again for contacting Epson.
Mary L
Epson Connection
First Name: Benjamin
Last Name: Daines
Date: 20070101
Time: 20:59:22
Zip/Postal Code:
country: usa
SYSTEM INFORMATION
Printer model name: Stylus Photo 820
Date of Purchase: NA
Serial Number: undefined
Computer Type: Intel-based Mac
Operating System: Mac OS X v10.4.4 or later
Cable type used: USB
Is the printer connected to a network? directly to computer
PROBLEM REPORT
Software used during problem:
File type being printed:
Digital Camera Card used: choose type
Detailed Description of Problem:
No matter what I do I cannot get EPSON USB to show up under More Printers
in Apple''s Printer Utility. I can add the regular driver for the printer
to my printers list just fine, but when I try to go into More Printers
EPSON USB to add the Border less and Minimized margins (like I had done
previously on a PPC based Mac) the option for EPSON USB from the pull down
menu doesn''t show up. It only shows EPSON FIREWIRE and EPSON TCP/IP. I
have tired reinstalling the driver, resetting the printer system and
restarting. I have even reinstalled the whole operating system, but even
on a fresh install (and the newest driver installed) EPSON USB still
didn''t show up in the pull down menu. Please help, I need to get border
less printing working again.
I am using a Core2Duo MacBook Pro, Epson Stylus Photo 820, The newest
version of the driver (downloaded January 1, 2007), and Mac OS X 10.4.8.
Does anyone have any advice to solve this?
--Thanks so much.

I'm having problems, too--- my Mac IBoook G4 10.4.8 does not "see"my new Epson flatbed color 58000 dream machine. Now iBook does see the Epson USB cord but not what's at the end of it....
Okay so maybe what has yet to help me, may help you:
I repaired permissions and wow-- there were permissions to repair
I downloaded the shareware, Printer Setup Repair which told me:
"18 missing files/directories found during the verification process. They may be responsible for certain printing problems. Printer Setup Repair cannot replace these items. Please refer to the log file for a list of the missing files/directories. You may need to reinstall OS X to resolve your printing issues. "
I know you did the reinstall (I so don't want to do that, hoping there is some way to just reinstall the printer utility) but perhaps the premissions repair
and maybe even the disk verification may help?
Printer Setup Repair told me things I didn't know-- perhaps it would assist you, too?
Good luck to us. A friend suggested that I may neeed another USB cable---
while my EPSON utility sees the printer, my Mac utility doe not and it may be
about some peculiarities of the USB cable.
Best of luck,
Akua

Adding an Epson Printer

I've been trying to get my MacBook Pro to communicate with my Espon stylus 3800 printer. It has worked for years, but all of a sudden, it doesn't. I've added the printer driver several times, but the computer can't find it and won't let me add the printer. Please help!

The latest driver:
http://support.apple.com/kb/DL1398
Then set up from Print & Scan

Printing problem with EPSON printer.

Hi,
When we take print on EPSON printer, some content on the right hand size of paper is not getting printed and that part of paper remain blank.
Setting for the same task have been done as,
1 ) we are printing document using perforated paper of size (35CM x 29CM) on EPSON LQ-1070+ printer.
2 ) We have added custom page-format for size 35CM X 29CM in custom device type ZSAPWIN (copy of SAPWIN) and using the same for printing.
Do we need to maintain any setting in windows ?
Please guide.
Thanks in advance,
Amit Raut

Hi Amit,
Have you checked by printing Word document on same printer??...
If the right part of the paper still left blank, then margin setting of the printer in windows has problem,
Otherwise check it in SPAD only.
Also check your Margin settings at printer.
Regards,
Audy

Problem with Latest Epson Printer Driver Update

I installed the Epson printer driver update that came out today, but it made absolutely no difference. My Epson printer is still using a the same old Epson driver plus Gutenprint. There is no other option. I don't get it. What's the point of installing the update if the printer is still stuck with Gutenprint? My printer (Epson Stylus Photo R340) is supported according to Apple's list.

alansky1 wrote:
Thanks for that tip, John. I found the "Epson SP R340 series" driver by searching for it as you suggested.
Happy to help Alan.
HOWEVER, I cannot print with this driver. I get the following error message when I try to print:
Error: Library/Printers/EPSON/InketPrinter2/Filter/rastertoescpll.app/Contents/MacOS/r astertoescpll failed
This seems common with the Epson drivers, there are several posts here with that problem. Some users have had success deleting the printer from Print & Fax Prefs and adding it again using the Epson (non-Gutenprint) driver. Others have had to delete the <hard drive>/Library/Printers/EPSON and /Library/Caches/Epson folders, re-download the update, then re-add the printer.
I would try the first one first since it's the easiest and you already have the update installed. If that doesn't work, the second should.
Hope this helps.

Epson printer not working after maverick 10.9.5 update

I recently updated my 2011 Macbook Pro with the OSX 10.9.5 software. Since then I have had a lot of trouble printing on my EPSON NX430 small in one wireless printer. I have tried deleting the printer from the printer list as well as removing the EPSON software, and re-downloading the EPSON print driver package from the apple website again. When I go to add the printer, in the print list, it seems to see it, but can't automatically find the print driver (I have to manually assign it.) When added the printer appears to be on "idle" and when I try to print the job seems to be sent though (the printer returns to idle) but nothing prints! I'm at my wits end with this - it is so annoying, and I've spent way too much time trying to troubleshoot. I do NOT recommend updating to Maverick!

Try some generic maintenance (we're trying to avoid reinstalling OS X):
Restart into Safe Mode, which does some system repairs. When it's finished, restart normally.
OS X: What is Safe Boot, Safe Mode?
Next, Reset the Printing System:
OS X Mavericks: Reset the printing system
Now, add the printer in Print & Scan prefs.
(PS - even if this doesn't fix it, it eliminates many possible glitches for troubleshooting. The things you've done just scratched the surface.)
BTW - you didn't need to download the Epson package. The new Apple driver paradigm is that the driver is automagically installed when you add the printer in Print & Scan prefs. And if that doesn't work, you have other issues with OS X.

Epson Perfection 2400 Scanner issue with Epson Print Driver 2.4.1 Update

After the Epson Print Driver 2.4.1 update, my scanner quit working with Image
Capture, which hangs during the overview scan. The scanner makes a pass over
the document, but Image Capture just sits for a while saying "Overview Scan..."
and then fails with a generic error message.
I tried the suggestion in [11993273|http://discussions.apple.com/thread.jspa?messageID=11993273&#11993273 ], but that did not work for me.
Any other ideas?

Thank's for the suggestion, but no help.
It is not straight-forward to uninstall the driver because Apple installer
does not offer an uninstall option. I resorted to
sudo find /Library -iname "epson" -print -exec mv {} ~/Desktop/epson \;
in the terminal. Reboot. Ran EPSONPrinterDrivers.pkg. Ran Disk Utility's
Repair Permissions. Reboot. Added scanner back in the System Preferences.
Opened Image Capture, the overview scan started and a few minutes later
*Scanner reported and error*
An error occured during scanning.

O.T. iMac and Epson Printer Issues

I have just set up my new 20" iMac running OS 10.5.6 and have been testing my various peripherals.
Printing old saved PSE3.0 images on my Epson 1290 (1280) they are coming out noticeably darker than when printed under OS 10.3.9. I deliberately did nothing with the saved files in PSE,just clicked print to avoid introducing any screen calibration issues,and the correct .icc profile had been added to Library/Color Sync/ Profiles for the paper I was using (and have always used).
Is this a known problem with an iMac running Leopard ?

Perhaps I should have done this before starting my thread,but who wants to reinvent the wheel !
Having spent many hours this morning,and even more sheets of paper to resolve this problem,I have come to the following conclusions on printing an image from PSE3 in Leopard :
USING THE EPSON PRINTER DRIVER -
Leave the printer manage colour - color controls - photo realistic - gamma 1.8
USING GUTENPRINT DRIVER (http://gimp-print.sourceforge.net/MacOSX.php)
Make no changes to Color Sync use Automatic
Do not change the .icc profile (although I did leave it set in PSE3).
Adjust print quality to max possible.
Both these options give acceptable prints, Epson perhaps a shade darker.
I preferred the colour representation in Gutenprint,but that is obviously a personal thing. Whether they'd satisfy someone making a living from photography is another matter.
In the future I will probably tweak the lightness in PSE to compensate for the slight darkening in the print process,but probably leave the colours alone.
Two other points -
The Gutenprint driver seems to print more quickly.
Adobe and Apple don't seem to care.

Epson printer and driver, all jobs "stopped due to filter errors"

My printer broke, so I'm trying to use my roommate's Epson WorkForce 520 with my Arch64 system. I grabbed the 64-bit driver rpm from Epson, extracted and copied everything to /opt (no readme for a manual installation, but the paths in the PPD point to having the files installed there). The driver came with some libraries, so I added their path to ld.so.conf and ran ldconfig. Successfully added the printer in CUPS, but trying to print anything gives me "/opt/..../epson_inkjet_printer_filter failed". I checked the permissions on the filter, they're 755 and it's executable. The CUPS error log shows "Job stopped due to filter errors; please consult the error_log file for details" followed by debug spew which doesn't clarify the issue for me, attached below.
I searched on the problem, found some people blaming it on issues with the update to CUPS 1.4 which have since been addressed, and others who were told to switch to using opensource drivers. Unfortunately that doesn't seem to be an option for me; Gutenprint and foomatic have drivers for the 500 but they don't support the 520; the only driver I can find that does is the one from Epson.
Anyway, I'm really hoping this is an issue with my CUPS/printer config, or that I missed some critical step in manually installing the printer drivers, and not that Epson's driver is just broken. If anyone has any ideas I'd be much obliged, let me know if you need more information.
Here's the complete error log from when I try to print. Sorry if it's obnoxiously long, I'm not sure which parts are relevant:
E [06/Oct/2010:11:45:04 -0400] [Job 17] Job stopped due to filter errors; please consult the error_log file for details.
D [06/Oct/2010:11:45:04 -0400] [Job 17] The following messages were recorded from 11:45:04 to 11:45:04
D [06/Oct/2010:11:45:04 -0400] [Job 17] -dict-
D [06/Oct/2010:11:45:04 -0400] [Job 17] -dict-
D [06/Oct/2010:11:45:04 -0400] [Job 17] -mark-
D [06/Oct/2010:11:45:04 -0400] [Job 17] -dict-
D [06/Oct/2010:11:45:04 -0400] [Job 17] -mark-
D [06/Oct/2010:11:45:04 -0400] [Job 17] Constructing.
D [06/Oct/2010:11:45:04 -0400] [Job 17] -dict-
D [06/Oct/2010:11:45:04 -0400] [Job 17] -dict-
D [06/Oct/2010:11:45:04 -0400] [Job 17] -dict-
D [06/Oct/2010:11:45:04 -0400] [Job 17] -dict-
D [06/Oct/2010:11:45:04 -0400] [Job 17] -mark-
D [06/Oct/2010:11:45:04 -0400] [Job 17] -dict-
D [06/Oct/2010:11:45:04 -0400] [Job 17] -mark-
D [06/Oct/2010:11:45:04 -0400] [Job 17] Putting.
D [06/Oct/2010:11:45:04 -0400] [Job 17] [612.0 792.0]
D [06/Oct/2010:11:45:04 -0400] [Job 17] /.MediaSize
D [06/Oct/2010:11:45:04 -0400] [Job 17] 0
D [06/Oct/2010:11:45:04 -0400] [Job 17] /%MediaDestination
D [06/Oct/2010:11:45:04 -0400] [Job 17] 0
D [06/Oct/2010:11:45:04 -0400] [Job 17] /%MediaSource
D [06/Oct/2010:11:45:04 -0400] [Job 17] 8
D [06/Oct/2010:11:45:04 -0400] [Job 17] /cupsBitsPerColor
D [06/Oct/2010:11:45:04 -0400] [Job 17] 0
D [06/Oct/2010:11:45:04 -0400] [Job 17] /cupsColorOrder
D [06/Oct/2010:11:45:04 -0400] [Job 17] 1
D [06/Oct/2010:11:45:04 -0400] [Job 17] /cupsColorSpace
D [06/Oct/2010:11:45:04 -0400] [Job 17] 1
D [06/Oct/2010:11:45:04 -0400] [Job 17] /cupsCompression
D [06/Oct/2010:11:45:04 -0400] [Job 17] -mark-
D [06/Oct/2010:11:45:04 -0400] [Job 17] true
D [06/Oct/2010:11:45:04 -0400] [Job 17] -dict-
D [06/Oct/2010:11:45:04 -0400] [Job 17] -device-
D [06/Oct/2010:11:45:04 -0400] [Job 17] -dict-
D [06/Oct/2010:11:45:04 -0400] [Job 17] -dict-
D [06/Oct/2010:11:45:04 -0400] [Job 17] -dict-
D [06/Oct/2010:11:45:04 -0400] [Job 17] -dict-
D [06/Oct/2010:11:45:04 -0400] [Job 17] -mark-
D [06/Oct/2010:11:45:04 -0400] [Job 17] -dict-
D [06/Oct/2010:11:45:04 -0400] [Job 17] -mark-
D [06/Oct/2010:11:45:04 -0400] [Job 17] cups_put_params(0x1348128, 0x7fff0ad38010)
D [06/Oct/2010:11:45:04 -0400] [Job 17] Setting cupsBitsPerColor to 8...
D [06/Oct/2010:11:45:04 -0400] [Job 17] Setting cupsColorOrder to 0...
D [06/Oct/2010:11:45:04 -0400] [Job 17] Setting cupsColorSpace to 1...
D [06/Oct/2010:11:45:04 -0400] [Job 17] Setting cupsCompression to 1...
D [06/Oct/2010:11:45:04 -0400] [Job 17] cups_set_color_info(0x1348128)
D [06/Oct/2010:11:45:04 -0400] [Job 17] cupsEncodeLUT[0] = 0
D [06/Oct/2010:11:45:04 -0400] [Job 17] cupsEncodeLUT[65535] = 255
D [06/Oct/2010:11:45:04 -0400] [Job 17] num_components = 3, depth = 24
D [06/Oct/2010:11:45:04 -0400] [Job 17] cupsColorSpace = 1, cupsColorOrder = 0
D [06/Oct/2010:11:45:04 -0400] [Job 17] cupsBitsPerPixel = 24, cupsBitsPerColor = 8
D [06/Oct/2010:11:45:04 -0400] [Job 17] max_gray = 0, dither_grays = 0
D [06/Oct/2010:11:45:04 -0400] [Job 17] max_color = 255, dither_colors = 256
D [06/Oct/2010:11:45:04 -0400] [Job 17] Updating PageSize to [612 792]...
D [06/Oct/2010:11:45:04 -0400] [Job 17] cups->header.Duplex = 0
D [06/Oct/2010:11:45:04 -0400] [Job 17] cups->header.Tumble = 0
D [06/Oct/2010:11:45:04 -0400] [Job 17] cups->page = 1
D [06/Oct/2010:11:45:04 -0400] [Job 17] cupsPPD = 0x1515170
D [06/Oct/2010:11:45:04 -0400] [Job 17] cupsPPD->flip_duplex = 0
D [06/Oct/2010:11:45:04 -0400] [Job 17] (4) Flip: X=0 Y=0
D [06/Oct/2010:11:45:04 -0400] [Job 17] cups->header.cupsPageSizeName =
D [06/Oct/2010:11:45:04 -0400] [Job 17] size = Letter
D [06/Oct/2010:11:45:04 -0400] [Job 17] margins[] = [ 0.116667 0.116667 0.116667 0.116667 ]
D [06/Oct/2010:11:45:04 -0400] [Job 17] Reallocating memory, [612 792] = 2976x3876 pixels, color space: 1, bits per color: 8...
D [06/Oct/2010:11:45:04 -0400] [Job 17] cups_get_space_params(0x1348128, 0x7fff0ad37d10)
D [06/Oct/2010:11:45:04 -0400] [Job 17] cache_size = 8388608
D [06/Oct/2010:11:45:04 -0400] [Job 17] cups_get_matrix(0x1348128, 0x7fff0ad37ad0)
D [06/Oct/2010:11:45:04 -0400] [Job 17] Portrait matrix: XX=+1 XY=0 YX=0 YY=-1
D [06/Oct/2010:11:45:04 -0400] [Job 17] width = 2976, height = 3876
D [06/Oct/2010:11:45:04 -0400] [Job 17] PageSize = [ 612 792 ], HWResolution = [ 360 360 ]
D [06/Oct/2010:11:45:04 -0400] [Job 17] HWMargins = [ 8.400 8.400 8.400 8.400 ]
D [06/Oct/2010:11:45:04 -0400] [Job 17] matrix = [ 5.000 0.000 0.000 -5.000 -42.000 3918.000 ]
D [06/Oct/2010:11:45:04 -0400] [Job 17] cups_get_matrix(0x1348128, 0x7fff0ad37a90)
D [06/Oct/2010:11:45:04 -0400] [Job 17] Portrait matrix: XX=+1 XY=0 YX=0 YY=-1
D [06/Oct/2010:11:45:04 -0400] [Job 17] width = 2976, height = 3876
D [06/Oct/2010:11:45:04 -0400] [Job 17] PageSize = [ 612 792 ], HWResolution = [ 360 360 ]
D [06/Oct/2010:11:45:04 -0400] [Job 17] HWMargins = [ 8.400 8.400 8.400 8.400 ]
D [06/Oct/2010:11:45:04 -0400] [Job 17] matrix = [ 5.000 0.000 0.000 -5.000 -42.000 3918.000 ]
D [06/Oct/2010:11:45:04 -0400] [Job 17] ppd = 0x1515170
D [06/Oct/2010:11:45:04 -0400] [Job 17] PageSize = [ 612.000 792.000 ]
D [06/Oct/2010:11:45:04 -0400] [Job 17] margins = [ 0.117 0.117 0.117 0.117 ]
D [06/Oct/2010:11:45:04 -0400] [Job 17] HWResolution = [ 360.000 360.000 ]
D [06/Oct/2010:11:45:04 -0400] [Job 17] width = 2976, height = 3876
D [06/Oct/2010:11:45:04 -0400] [Job 17] HWMargins = [ 8.400 8.400 8.400 8.400 ]
D [06/Oct/2010:11:45:04 -0400] [Job 17] Result of putting.
D [06/Oct/2010:11:45:04 -0400] [Job 17] false
D [06/Oct/2010:11:45:04 -0400] [Job 17] -device-
D [06/Oct/2010:11:45:04 -0400] [Job 17] -dict-
D [06/Oct/2010:11:45:04 -0400] [Job 17] -dict-
D [06/Oct/2010:11:45:04 -0400] [Job 17] -dict-
D [06/Oct/2010:11:45:04 -0400] [Job 17] -dict-
D [06/Oct/2010:11:45:04 -0400] [Job 17] -mark-
D [06/Oct/2010:11:45:04 -0400] [Job 17] -dict-
D [06/Oct/2010:11:45:04 -0400] [Job 17] -mark-
D [06/Oct/2010:11:45:04 -0400] [Job 17] Installing.
D [06/Oct/2010:11:45:04 -0400] [Job 17] false
D [06/Oct/2010:11:45:04 -0400] [Job 17] -device-
D [06/Oct/2010:11:45:04 -0400] [Job 17] -dict-
D [06/Oct/2010:11:45:04 -0400] [Job 17] -dict-
D [06/Oct/2010:11:45:04 -0400] [Job 17] -dict-
D [06/Oct/2010:11:45:04 -0400] [Job 17] -dict-
D [06/Oct/2010:11:45:04 -0400] [Job 17] -mark-
D [06/Oct/2010:11:45:04 -0400] [Job 17] -dict-
D [06/Oct/2010:11:45:04 -0400] [Job 17] -mark-
D [06/Oct/2010:11:45:04 -0400] [Job 17] cups_get_matrix(0x1348128, 0x7fff0ad38050)
D [06/Oct/2010:11:45:04 -0400] [Job 17] Portrait matrix: XX=+1 XY=0 YX=0 YY=-1
D [06/Oct/2010:11:45:04 -0400] [Job 17] width = 2976, height = 3876
D [06/Oct/2010:11:45:04 -0400] [Job 17] PageSize = [ 612 792 ], HWResolution = [ 360 360 ]
D [06/Oct/2010:11:45:04 -0400] [Job 17] HWMargins = [ 8.400 8.400 8.400 8.400 ]
D [06/Oct/2010:11:45:04 -0400] [Job 17] matrix = [ 5.000 0.000 0.000 -5.000 -42.000 3918.000 ]
D [06/Oct/2010:11:45:04 -0400] [Job 17] cups_get_matrix(0x1348128, 0x7fff0ad38000)
D [06/Oct/2010:11:45:04 -0400] [Job 17] Portrait matrix: XX=+1 XY=0 YX=0 YY=-1
D [06/Oct/2010:11:45:04 -0400] [Job 17] width = 2976, height = 3876
D [06/Oct/2010:11:45:04 -0400] [Job 17] PageSize = [ 612 792 ], HWResolution = [ 360 360 ]
D [06/Oct/2010:11:45:04 -0400] [Job 17] HWMargins = [ 8.400 8.400 8.400 8.400 ]
D [06/Oct/2010:11:45:04 -0400] [Job 17] matrix = [ 5.000 0.000 0.000 -5.000 -42.000 3918.000 ]
D [06/Oct/2010:11:45:04 -0400] [Job 17] cups_get_params(0x1348128, 0x7fff0ad38010)
D [06/Oct/2010:11:45:04 -0400] [Job 17] before gdev_prn_get_params()
D [06/Oct/2010:11:45:04 -0400] [Job 17] after gdev_prn_get_params()
D [06/Oct/2010:11:45:04 -0400] [Job 17] Leaving cups_get_params()
D [06/Oct/2010:11:45:04 -0400] [Job 17] cups_get_matrix(0x1348128, 0x7fff0ad38090)
D [06/Oct/2010:11:45:04 -0400] [Job 17] Portrait matrix: XX=+1 XY=0 YX=0 YY=-1
D [06/Oct/2010:11:45:04 -0400] [Job 17] width = 2976, height = 3876
D [06/Oct/2010:11:45:04 -0400] [Job 17] PageSize = [ 612 792 ], HWResolution = [ 360 360 ]
D [06/Oct/2010:11:45:04 -0400] [Job 17] HWMargins = [ 8.400 8.400 8.400 8.400 ]
D [06/Oct/2010:11:45:04 -0400] [Job 17] matrix = [ 5.000 0.000 0.000 -5.000 -42.000 3918.000 ]
D [06/Oct/2010:11:45:04 -0400] [Job 17] cups_get_params(0x1348128, 0x7fff0ad38010)
D [06/Oct/2010:11:45:04 -0400] [Job 17] before gdev_prn_get_params()
D [06/Oct/2010:11:45:04 -0400] [Job 17] after gdev_prn_get_params()
D [06/Oct/2010:11:45:04 -0400] [Job 17] Leaving cups_get_params()
D [06/Oct/2010:11:45:04 -0400] [Job 17] cups_get_matrix(0x1348128, 0x7fff0ad38080)
D [06/Oct/2010:11:45:04 -0400] [Job 17] Portrait matrix: XX=+1 XY=0 YX=0 YY=-1
D [06/Oct/2010:11:45:04 -0400] [Job 17] width = 2976, height = 3876
D [06/Oct/2010:11:45:04 -0400] [Job 17] PageSize = [ 612 792 ], HWResolution = [ 360 360 ]
D [06/Oct/2010:11:45:04 -0400] [Job 17] HWMargins = [ 8.400 8.400 8.400 8.400 ]
D [06/Oct/2010:11:45:04 -0400] [Job 17] matrix = [ 5.000 0.000 0.000 -5.000 -42.000 3918.000 ]
D [06/Oct/2010:11:45:04 -0400] [Job 17] cups_get_params(0x1348128, 0x7fff0ad38010)
D [06/Oct/2010:11:45:04 -0400] [Job 17] before gdev_prn_get_params()
D [06/Oct/2010:11:45:04 -0400] [Job 17] after gdev_prn_get_params()
D [06/Oct/2010:11:45:04 -0400] [Job 17] Leaving cups_get_params()
D [06/Oct/2010:11:45:04 -0400] [Job 17] cups_get_matrix(0x1348128, 0x7fff0ad37f40)
D [06/Oct/2010:11:45:04 -0400] [Job 17] Portrait matrix: XX=+1 XY=0 YX=0 YY=-1
D [06/Oct/2010:11:45:04 -0400] [Job 17] width = 2976, height = 3876
D [06/Oct/2010:11:45:04 -0400] [Job 17] PageSize = [ 612 792 ], HWResolution = [ 360 360 ]
D [06/Oct/2010:11:45:04 -0400] [Job 17] HWMargins = [ 8.400 8.400 8.400 8.400 ]
D [06/Oct/2010:11:45:04 -0400] [Job 17] matrix = [ 5.000 0.000 0.000 -5.000 -42.000 3918.000 ]
D [06/Oct/2010:11:45:04 -0400] [Job 17] cups_get_matrix(0x1348128, 0x7fff0ad38030)
D [06/Oct/2010:11:45:04 -0400] [Job 17] Portrait matrix: XX=+1 XY=0 YX=0 YY=-1
D [06/Oct/2010:11:45:04 -0400] [Job 17] width = 2976, height = 3876
D [06/Oct/2010:11:45:04 -0400] [Job 17] PageSize = [ 612 792 ], HWResolution = [ 360 360 ]
D [06/Oct/2010:11:45:04 -0400] [Job 17] HWMargins = [ 8.400 8.400 8.400 8.400 ]
D [06/Oct/2010:11:45:04 -0400] [Job 17] matrix = [ 5.000 0.000 0.000 -5.000 -42.000 3918.000 ]
D [06/Oct/2010:11:45:04 -0400] [Job 17] Finishing.
D [06/Oct/2010:11:45:04 -0400] [Job 17] -dict-
D [06/Oct/2010:11:45:04 -0400] [Job 17] -dict-
D [06/Oct/2010:11:45:04 -0400] [Job 17] -dict-
D [06/Oct/2010:11:45:04 -0400] [Job 17] -dict-
D [06/Oct/2010:11:45:04 -0400] [Job 17] -mark-
D [06/Oct/2010:11:45:04 -0400] [Job 17] -dict-
D [06/Oct/2010:11:45:04 -0400] [Job 17] -mark-
D [06/Oct/2010:11:45:04 -0400] [Job 17] **** DSC comment: /Page
D [06/Oct/2010:11:45:04 -0400] [Job 17] << /DSC_struct -dsc_data_struct- /PageNum 1 >>
D [06/Oct/2010:11:45:04 -0400] [Job 17] cups_put_params(0x1348128, 0x7fff0ad38010)
D [06/Oct/2010:11:45:04 -0400] [Job 17] cups_set_color_info(0x1348128)
D [06/Oct/2010:11:45:04 -0400] [Job 17] cupsEncodeLUT[0] = 0
D [06/Oct/2010:11:45:04 -0400] [Job 17] cupsEncodeLUT[65535] = 255
D [06/Oct/2010:11:45:04 -0400] [Job 17] num_components = 3, depth = 24
D [06/Oct/2010:11:45:04 -0400] [Job 17] cupsColorSpace = 1, cupsColorOrder = 0
D [06/Oct/2010:11:45:04 -0400] [Job 17] cupsBitsPerPixel = 24, cupsBitsPerColor = 8
D [06/Oct/2010:11:45:04 -0400] [Job 17] max_gray = 0, dither_grays = 0
D [06/Oct/2010:11:45:04 -0400] [Job 17] max_color = 255, dither_colors = 256
D [06/Oct/2010:11:45:04 -0400] [Job 17] ppd = 0x1515170
D [06/Oct/2010:11:45:04 -0400] [Job 17] PageSize = [ 612.000 792.000 ]
D [06/Oct/2010:11:45:04 -0400] [Job 17] margins = [ 0.000 0.000 0.000 0.000 ]
D [06/Oct/2010:11:45:04 -0400] [Job 17] HWResolution = [ 360.000 360.000 ]
D [06/Oct/2010:11:45:04 -0400] [Job 17] width = 2976, height = 3876
D [06/Oct/2010:11:45:04 -0400] [Job 17] HWMargins = [ 8.400 8.400 8.400 8.400 ]
D [06/Oct/2010:11:45:04 -0400] [Job 17] **** DSC comment: /PageBoundingBox
D [06/Oct/2010:11:45:04 -0400] [Job 17] << /DSC_struct -dsc_data_struct- >>
D [06/Oct/2010:11:45:04 -0400] [Job 17] cups_put_params(0x1348128, 0x7fff0ad38010)
D [06/Oct/2010:11:45:04 -0400] [Job 17] cups_set_color_info(0x1348128)
D [06/Oct/2010:11:45:04 -0400] [Job 17] cupsEncodeLUT[0] = 0
D [06/Oct/2010:11:45:04 -0400] [Job 17] cupsEncodeLUT[65535] = 255
D [06/Oct/2010:11:45:04 -0400] [Job 17] num_components = 3, depth = 24
D [06/Oct/2010:11:45:04 -0400] [Job 17] cupsColorSpace = 1, cupsColorOrder = 0
D [06/Oct/2010:11:45:04 -0400] [Job 17] cupsBitsPerPixel = 24, cupsBitsPerColor = 8
D [06/Oct/2010:11:45:04 -0400] [Job 17] max_gray = 0, dither_grays = 0
D [06/Oct/2010:11:45:04 -0400] [Job 17] max_color = 255, dither_colors = 256
D [06/Oct/2010:11:45:04 -0400] [Job 17] ppd = 0x1515170
D [06/Oct/2010:11:45:04 -0400] [Job 17] PageSize = [ 612.000 792.000 ]
D [06/Oct/2010:11:45:04 -0400] [Job 17] margins = [ 0.000 0.000 0.000 0.000 ]
D [06/Oct/2010:11:45:04 -0400] [Job 17] HWResolution = [ 360.000 360.000 ]
D [06/Oct/2010:11:45:04 -0400] [Job 17] width = 2976, height = 3876
D [06/Oct/2010:11:45:04 -0400] [Job 17] HWMargins = [ 8.400 8.400 8.400 8.400 ]
D [06/Oct/2010:11:45:04 -0400] [Job 17] Wrote 1 pages...
D [06/Oct/2010:11:45:04 -0400] [Job 17] cups_get_params(0x1348128, 0x7fff0ad38010)
D [06/Oct/2010:11:45:04 -0400] [Job 17] before gdev_prn_get_params()
D [06/Oct/2010:11:45:04 -0400] [Job 17] after gdev_prn_get_params()
D [06/Oct/2010:11:45:04 -0400] [Job 17] Leaving cups_get_params()
D [06/Oct/2010:11:45:04 -0400] [Job 17] cups_print_pages(0x1348128, 0x7fd9faf08780, 1)
D [06/Oct/2010:11:45:04 -0400] [Job 17] cupsBitsPerPixel = 24, cupsWidth = 2976, cupsBytesPerLine = 8928, srcbytes = 8928
D [06/Oct/2010:11:45:04 -0400] [Job 17] End of messages
D [06/Oct/2010:11:45:04 -0400] [Job 17] printer-state=3(idle)
D [06/Oct/2010:11:45:04 -0400] [Job 17] printer-state-message="Processing page 1..."
D [06/Oct/2010:11:45:04 -0400] [Job 17] printer-state-reasons=none
E [06/Oct/2010:11:48:16 -0400] [Job 17] Job stopped due to filter errors; please consult the error_log file for details.
D [06/Oct/2010:11:48:16 -0400] [Job 17] The following messages were recorded from 11:48:16 to 11:48:16
D [06/Oct/2010:11:48:16 -0400] [Job 17] -dict-
D [06/Oct/2010:11:48:16 -0400] [Job 17] -dict-
D [06/Oct/2010:11:48:16 -0400] [Job 17] -mark-
D [06/Oct/2010:11:48:16 -0400] [Job 17] -dict-
D [06/Oct/2010:11:48:16 -0400] [Job 17] -mark-
D [06/Oct/2010:11:48:16 -0400] [Job 17] Constructing.
D [06/Oct/2010:11:48:16 -0400] [Job 17] -dict-
D [06/Oct/2010:11:48:16 -0400] [Job 17] -dict-
D [06/Oct/2010:11:48:16 -0400] [Job 17] -dict-
D [06/Oct/2010:11:48:16 -0400] [Job 17] -dict-
D [06/Oct/2010:11:48:16 -0400] [Job 17] -mark-
D [06/Oct/2010:11:48:16 -0400] [Job 17] -dict-
D [06/Oct/2010:11:48:16 -0400] [Job 17] -mark-
D [06/Oct/2010:11:48:16 -0400] [Job 17] Putting.
D [06/Oct/2010:11:48:16 -0400] [Job 17] [612.0 792.0]
D [06/Oct/2010:11:48:16 -0400] [Job 17] /.MediaSize
D [06/Oct/2010:11:48:16 -0400] [Job 17] 0
D [06/Oct/2010:11:48:16 -0400] [Job 17] /%MediaDestination
D [06/Oct/2010:11:48:16 -0400] [Job 17] 0
D [06/Oct/2010:11:48:16 -0400] [Job 17] /%MediaSource
D [06/Oct/2010:11:48:16 -0400] [Job 17] 8
D [06/Oct/2010:11:48:16 -0400] [Job 17] /cupsBitsPerColor
D [06/Oct/2010:11:48:16 -0400] [Job 17] 0
D [06/Oct/2010:11:48:16 -0400] [Job 17] /cupsColorOrder
D [06/Oct/2010:11:48:16 -0400] [Job 17] 1
D [06/Oct/2010:11:48:16 -0400] [Job 17] /cupsColorSpace
D [06/Oct/2010:11:48:16 -0400] [Job 17] 1
D [06/Oct/2010:11:48:16 -0400] [Job 17] /cupsCompression
D [06/Oct/2010:11:48:16 -0400] [Job 17] -mark-
D [06/Oct/2010:11:48:16 -0400] [Job 17] true
D [06/Oct/2010:11:48:16 -0400] [Job 17] -dict-
D [06/Oct/2010:11:48:16 -0400] [Job 17] -device-
D [06/Oct/2010:11:48:16 -0400] [Job 17] -dict-
D [06/Oct/2010:11:48:16 -0400] [Job 17] -dict-
D [06/Oct/2010:11:48:16 -0400] [Job 17] -dict-
D [06/Oct/2010:11:48:16 -0400] [Job 17] -dict-
D [06/Oct/2010:11:48:16 -0400] [Job 17] -mark-
D [06/Oct/2010:11:48:16 -0400] [Job 17] -dict-
D [06/Oct/2010:11:48:16 -0400] [Job 17] -mark-
D [06/Oct/2010:11:48:16 -0400] [Job 17] cups_put_params(0x2623128, 0x7fff41eea720)
D [06/Oct/2010:11:48:16 -0400] [Job 17] Setting cupsBitsPerColor to 8...
D [06/Oct/2010:11:48:16 -0400] [Job 17] Setting cupsColorOrder to 0...
D [06/Oct/2010:11:48:16 -0400] [Job 17] Setting cupsColorSpace to 1...
D [06/Oct/2010:11:48:16 -0400] [Job 17] Setting cupsCompression to 1...
D [06/Oct/2010:11:48:16 -0400] [Job 17] cups_set_color_info(0x2623128)
D [06/Oct/2010:11:48:16 -0400] [Job 17] cupsEncodeLUT[0] = 0
D [06/Oct/2010:11:48:16 -0400] [Job 17] cupsEncodeLUT[65535] = 255
D [06/Oct/2010:11:48:16 -0400] [Job 17] num_components = 3, depth = 24
D [06/Oct/2010:11:48:16 -0400] [Job 17] cupsColorSpace = 1, cupsColorOrder = 0
D [06/Oct/2010:11:48:16 -0400] [Job 17] cupsBitsPerPixel = 24, cupsBitsPerColor = 8
D [06/Oct/2010:11:48:16 -0400] [Job 17] max_gray = 0, dither_grays = 0
D [06/Oct/2010:11:48:16 -0400] [Job 17] max_color = 255, dither_colors = 256
D [06/Oct/2010:11:48:16 -0400] [Job 17] Updating PageSize to [612 792]...
D [06/Oct/2010:11:48:16 -0400] [Job 17] cups->header.Duplex = 0
D [06/Oct/2010:11:48:16 -0400] [Job 17] cups->header.Tumble = 0
D [06/Oct/2010:11:48:16 -0400] [Job 17] cups->page = 1
D [06/Oct/2010:11:48:16 -0400] [Job 17] cupsPPD = 0x27f0170
D [06/Oct/2010:11:48:16 -0400] [Job 17] cupsPPD->flip_duplex = 0
D [06/Oct/2010:11:48:16 -0400] [Job 17] (4) Flip: X=0 Y=0
D [06/Oct/2010:11:48:16 -0400] [Job 17] cups->header.cupsPageSizeName =
D [06/Oct/2010:11:48:16 -0400] [Job 17] size = Letter
D [06/Oct/2010:11:48:16 -0400] [Job 17] margins[] = [ 0.116667 0.116667 0.116667 0.116667 ]
D [06/Oct/2010:11:48:16 -0400] [Job 17] Reallocating memory, [612 792] = 2976x3876 pixels, color space: 1, bits per color: 8...
D [06/Oct/2010:11:48:16 -0400] [Job 17] cups_get_space_params(0x2623128, 0x7fff41eea420)
D [06/Oct/2010:11:48:16 -0400] [Job 17] cache_size = 8388608
D [06/Oct/2010:11:48:16 -0400] [Job 17] cups_get_matrix(0x2623128, 0x7fff41eea1e0)
D [06/Oct/2010:11:48:16 -0400] [Job 17] Portrait matrix: XX=+1 XY=0 YX=0 YY=-1
D [06/Oct/2010:11:48:16 -0400] [Job 17] width = 2976, height = 3876
D [06/Oct/2010:11:48:16 -0400] [Job 17] PageSize = [ 612 792 ], HWResolution = [ 360 360 ]
D [06/Oct/2010:11:48:16 -0400] [Job 17] HWMargins = [ 8.400 8.400 8.400 8.400 ]
D [06/Oct/2010:11:48:16 -0400] [Job 17] matrix = [ 5.000 0.000 0.000 -5.000 -42.000 3918.000 ]
D [06/Oct/2010:11:48:16 -0400] [Job 17] cups_get_matrix(0x2623128, 0x7fff41eea1a0)
D [06/Oct/2010:11:48:16 -0400] [Job 17] Portrait matrix: XX=+1 XY=0 YX=0 YY=-1
D [06/Oct/2010:11:48:16 -0400] [Job 17] width = 2976, height = 3876
D [06/Oct/2010:11:48:16 -0400] [Job 17] PageSize = [ 612 792 ], HWResolution = [ 360 360 ]
D [06/Oct/2010:11:48:16 -0400] [Job 17] HWMargins = [ 8.400 8.400 8.400 8.400 ]
D [06/Oct/2010:11:48:16 -0400] [Job 17] matrix = [ 5.000 0.000 0.000 -5.000 -42.000 3918.000 ]
D [06/Oct/2010:11:48:16 -0400] [Job 17] ppd = 0x27f0170
D [06/Oct/2010:11:48:16 -0400] [Job 17] PageSize = [ 612.000 792.000 ]
D [06/Oct/2010:11:48:16 -0400] [Job 17] margins = [ 0.117 0.117 0.117 0.117 ]
D [06/Oct/2010:11:48:16 -0400] [Job 17] HWResolution = [ 360.000 360.000 ]
D [06/Oct/2010:11:48:16 -0400] [Job 17] width = 2976, height = 3876
D [06/Oct/2010:11:48:16 -0400] [Job 17] HWMargins = [ 8.400 8.400 8.400 8.400 ]
D [06/Oct/2010:11:48:16 -0400] [Job 17] Result of putting.
D [06/Oct/2010:11:48:16 -0400] [Job 17] false
D [06/Oct/2010:11:48:16 -0400] [Job 17] -device-
D [06/Oct/2010:11:48:16 -0400] [Job 17] -dict-
D [06/Oct/2010:11:48:16 -0400] [Job 17] -dict-
D [06/Oct/2010:11:48:16 -0400] [Job 17] -dict-
D [06/Oct/2010:11:48:16 -0400] [Job 17] -dict-
D [06/Oct/2010:11:48:16 -0400] [Job 17] -mark-
D [06/Oct/2010:11:48:16 -0400] [Job 17] -dict-
D [06/Oct/2010:11:48:16 -0400] [Job 17] -mark-
D [06/Oct/2010:11:48:16 -0400] [Job 17] Installing.
D [06/Oct/2010:11:48:16 -0400] [Job 17] false
D [06/Oct/2010:11:48:16 -0400] [Job 17] -device-
D [06/Oct/2010:11:48:16 -0400] [Job 17] -dict-
D [06/Oct/2010:11:48:16 -0400] [Job 17] -dict-
D [06/Oct/2010:11:48:16 -0400] [Job 17] -dict-
D [06/Oct/2010:11:48:16 -0400] [Job 17] -dict-
D [06/Oct/2010:11:48:16 -0400] [Job 17] -mark-
D [06/Oct/2010:11:48:16 -0400] [Job 17] -dict-
D [06/Oct/2010:11:48:16 -0400] [Job 17] -mark-
D [06/Oct/2010:11:48:16 -0400] [Job 17] cups_get_matrix(0x2623128, 0x7fff41eea760)
D [06/Oct/2010:11:48:16 -0400] [Job 17] Portrait matrix: XX=+1 XY=0 YX=0 YY=-1
D [06/Oct/2010:11:48:16 -0400] [Job 17] width = 2976, height = 3876
D [06/Oct/2010:11:48:16 -0400] [Job 17] PageSize = [ 612 792 ], HWResolution = [ 360 360 ]
D [06/Oct/2010:11:48:16 -0400] [Job 17] HWMargins = [ 8.400 8.400 8.400 8.400 ]
D [06/Oct/2010:11:48:16 -0400] [Job 17] matrix = [ 5.000 0.000 0.000 -5.000 -42.000 3918.000 ]
D [06/Oct/2010:11:48:16 -0400] [Job 17] cups_get_matrix(0x2623128, 0x7fff41eea710)
D [06/Oct/2010:11:48:16 -0400] [Job 17] Portrait matrix: XX=+1 XY=0 YX=0 YY=-1
D [06/Oct/2010:11:48:16 -0400] [Job 17] width = 2976, height = 3876
D [06/Oct/2010:11:48:16 -0400] [Job 17] PageSize = [ 612 792 ], HWResolution = [ 360 360 ]
D [06/Oct/2010:11:48:16 -0400] [Job 17] HWMargins = [ 8.400 8.400 8.400 8.400 ]
D [06/Oct/2010:11:48:16 -0400] [Job 17] matrix = [ 5.000 0.000 0.000 -5.000 -42.000 3918.000 ]
D [06/Oct/2010:11:48:16 -0400] [Job 17] cups_get_params(0x2623128, 0x7fff41eea720)
D [06/Oct/2010:11:48:16 -0400] [Job 17] before gdev_prn_get_params()
D [06/Oct/2010:11:48:16 -0400] [Job 17] after gdev_prn_get_params()
D [06/Oct/2010:11:48:16 -0400] [Job 17] Leaving cups_get_params()
D [06/Oct/2010:11:48:16 -0400] [Job 17] cups_get_matrix(0x2623128, 0x7fff41eea7a0)
D [06/Oct/2010:11:48:16 -0400] [Job 17] Portrait matrix: XX=+1 XY=0 YX=0 YY=-1
D [06/Oct/2010:11:48:16 -0400] [Job 17] width = 2976, height = 3876
D [06/Oct/2010:11:48:16 -0400] [Job 17] PageSize = [ 612 792 ], HWResolution = [ 360 360 ]
D [06/Oct/2010:11:48:16 -0400] [Job 17] HWMargins = [ 8.400 8.400 8.400 8.400 ]
D [06/Oct/2010:11:48:16 -0400] [Job 17] matrix = [ 5.000 0.000 0.000 -5.000 -42.000 3918.000 ]
D [06/Oct/2010:11:48:16 -0400] [Job 17] cups_get_params(0x2623128, 0x7fff41eea720)
D [06/Oct/2010:11:48:16 -0400] [Job 17] before gdev_prn_get_params()
D [06/Oct/2010:11:48:16 -0400] [Job 17] after gdev_prn_get_params()
D [06/Oct/2010:11:48:16 -0400] [Job 17] Leaving cups_get_params()
D [06/Oct/2010:11:48:16 -0400] [Job 17] cups_get_matrix(0x2623128, 0x7fff41eea790)
D [06/Oct/2010:11:48:16 -0400] [Job 17] Portrait matrix: XX=+1 XY=0 YX=0 YY=-1
D [06/Oct/2010:11:48:16 -0400] [Job 17] width = 2976, height = 3876
D [06/Oct/2010:11:48:16 -0400] [Job 17] PageSize = [ 612 792 ], HWResolution = [ 360 360 ]
D [06/Oct/2010:11:48:16 -0400] [Job 17] HWMargins = [ 8.400 8.400 8.400 8.400 ]
D [06/Oct/2010:11:48:16 -0400] [Job 17] matrix = [ 5.000 0.000 0.000 -5.000 -42.000 3918.000 ]
D [06/Oct/2010:11:48:16 -0400] [Job 17] cups_get_params(0x2623128, 0x7fff41eea720)
D [06/Oct/2010:11:48:16 -0400] [Job 17] before gdev_prn_get_params()
D [06/Oct/2010:11:48:16 -0400] [Job 17] after gdev_prn_get_params()
D [06/Oct/2010:11:48:16 -0400] [Job 17] Leaving cups_get_params()
D [06/Oct/2010:11:48:16 -0400] [Job 17] cups_get_matrix(0x2623128, 0x7fff41eea650)
D [06/Oct/2010:11:48:16 -0400] [Job 17] Portrait matrix: XX=+1 XY=0 YX=0 YY=-1
D [06/Oct/2010:11:48:16 -0400] [Job 17] width = 2976, height = 3876
D [06/Oct/2010:11:48:16 -0400] [Job 17] PageSize = [ 612 792 ], HWResolution = [ 360 360 ]
D [06/Oct/2010:11:48:16 -0400] [Job 17] HWMargins = [ 8.400 8.400 8.400 8.400 ]
D [06/Oct/2010:11:48:16 -0400] [Job 17] matrix = [ 5.000 0.000 0.000 -5.000 -42.000 3918.000 ]
D [06/Oct/2010:11:48:16 -0400] [Job 17] cups_get_matrix(0x2623128, 0x7fff41eea740)
D [06/Oct/2010:11:48:16 -0400] [Job 17] Portrait matrix: XX=+1 XY=0 YX=0 YY=-1
D [06/Oct/2010:11:48:16 -0400] [Job 17] width = 2976, height = 3876
D [06/Oct/2010:11:48:16 -0400] [Job 17] PageSize = [ 612 792 ], HWResolution = [ 360 360 ]
D [06/Oct/2010:11:48:16 -0400] [Job 17] HWMargins = [ 8.400 8.400 8.400 8.400 ]
D [06/Oct/2010:11:48:16 -0400] [Job 17] matrix = [ 5.000 0.000 0.000 -5.000 -42.000 3918.000 ]
D [06/Oct/2010:11:48:16 -0400] [Job 17] Finishing.
D [06/Oct/2010:11:48:16 -0400] [Job 17] -dict-
D [06/Oct/2010:11:48:16 -0400] [Job 17] -dict-
D [06/Oct/2010:11:48:16 -0400] [Job 17] -dict-
D [06/Oct/2010:11:48:16 -0400] [Job 17] -dict-
D [06/Oct/2010:11:48:16 -0400] [Job 17] -mark-
D [06/Oct/2010:11:48:16 -0400] [Job 17] -dict-
D [06/Oct/2010:11:48:16 -0400] [Job 17] -mark-
D [06/Oct/2010:11:48:16 -0400] [Job 17] **** DSC comment: /Page
D [06/Oct/2010:11:48:16 -0400] [Job 17] << /DSC_struct -dsc_data_struct- /PageNum 1 >>
D [06/Oct/2010:11:48:16 -0400] [Job 17] cups_put_params(0x2623128, 0x7fff41eea720)
D [06/Oct/2010:11:48:16 -0400] [Job 17] cups_set_color_info(0x2623128)
D [06/Oct/2010:11:48:16 -0400] [Job 17] cupsEncodeLUT[0] = 0
D [06/Oct/2010:11:48:16 -0400] [Job 17] cupsEncodeLUT[65535] = 255
D [06/Oct/2010:11:48:16 -0400] [Job 17] num_components = 3, depth = 24
D [06/Oct/2010:11:48:16 -0400] [Job 17] cupsColorSpace = 1, cupsColorOrder = 0
D [06/Oct/2010:11:48:16 -0400] [Job 17] cupsBitsPerPixel = 24, cupsBitsPerColor = 8
D [06/Oct/2010:11:48:16 -0400] [Job 17] max_gray = 0, dither_grays = 0
D [06/Oct/2010:11:48:16 -0400] [Job 17] max_color = 255, dither_colors = 256
D [06/Oct/2010:11:48:16 -0400] [Job 17] ppd = 0x27f0170
D [06/Oct/2010:11:48:16 -0400] [Job 17] PageSize = [ 612.000 792.000 ]
D [06/Oct/2010:11:48:16 -0400] [Job 17] margins = [ 0.000 0.000 0.000 0.000 ]
D [06/Oct/2010:11:48:16 -0400] [Job 17] HWResolution = [ 360.000 360.000 ]
D [06/Oct/2010:11:48:16 -0400] [Job 17] width = 2976, height = 3876
D [06/Oct/2010:11:48:16 -0400] [Job 17] HWMargins = [ 8.400 8.400 8.400 8.400 ]
D [06/Oct/2010:11:48:16 -0400] [Job 17] **** DSC comment: /PageBoundingBox
D [06/Oct/2010:11:48:16 -0400] [Job 17] << /DSC_struct -dsc_data_struct- >>
D [06/Oct/2010:11:48:16 -0400] [Job 17] cups_put_params(0x2623128, 0x7fff41eea720)
D [06/Oct/2010:11:48:16 -0400] [Job 17] cups_set_color_info(0x2623128)
D [06/Oct/2010:11:48:16 -0400] [Job 17] cupsEncodeLUT[0] = 0
D [06/Oct/2010:11:48:16 -0400] [Job 17] cupsEncodeLUT[65535] = 255
D [06/Oct/2010:11:48:16 -0400] [Job 17] num_components = 3, depth = 24
D [06/Oct/2010:11:48:16 -0400] [Job 17] cupsColorSpace = 1, cupsColorOrder = 0
D [06/Oct/2010:11:48:16 -0400] [Job 17] cupsBitsPerPixel = 24, cupsBitsPerColor = 8
D [06/Oct/2010:11:48:16 -0400] [Job 17] max_gray = 0, dither_grays = 0
D [06/Oct/2010:11:48:16 -0400] [Job 17] max_color = 255, dither_colors = 256
D [06/Oct/2010:11:48:16 -0400] [Job 17] ppd = 0x27f0170
D [06/Oct/2010:11:48:16 -0400] [Job 17] PageSize = [ 612.000 792.000 ]
D [06/Oct/2010:11:48:16 -0400] [Job 17] margins = [ 0.000 0.000 0.000 0.000 ]
D [06/Oct/2010:11:48:16 -0400] [Job 17] HWResolution = [ 360.000 360.000 ]
D [06/Oct/2010:11:48:16 -0400] [Job 17] width = 2976, height = 3876
D [06/Oct/2010:11:48:16 -0400] [Job 17] HWMargins = [ 8.400 8.400 8.400 8.400 ]
D [06/Oct/2010:11:48:16 -0400] [Job 17] Wrote 1 pages...
D [06/Oct/2010:11:48:16 -0400] [Job 17] cups_get_params(0x2623128, 0x7fff41eea720)
D [06/Oct/2010:11:48:16 -0400] [Job 17] before gdev_prn_get_params()
D [06/Oct/2010:11:48:16 -0400] [Job 17] after gdev_prn_get_params()
D [06/Oct/2010:11:48:16 -0400] [Job 17] Leaving cups_get_params()
D [06/Oct/2010:11:48:16 -0400] [Job 17] cups_print_pages(0x2623128, 0x7f485d7e3780, 1)
D [06/Oct/2010:11:48:16 -0400] [Job 17] cupsBitsPerPixel = 24, cupsWidth = 2976, cupsBytesPerLine = 8928, srcbytes = 8928
D [06/Oct/2010:11:48:16 -0400] [Job 17] End of messages
D [06/Oct/2010:11:48:16 -0400] [Job 17] printer-state=3(idle)
D [06/Oct/2010:11:48:16 -0400] [Job 17] printer-state-message="Processing page 1..."
D [06/Oct/2010:11:48:16 -0400] [Job 17] printer-state-reasons=none
Thanks in advance

@kusmar
You could recompile the filter with --enable-debug. It will create the file "/tmp/epson-inkjet-printer-filter.txt" if you call the filter...
I installed the driver from epson-inkjet-printer-workforce-635-nx625-series-1.0.0-1lsb3.2.src.rpm and compiled the filter by myself. But I get an error if the filter will load the closed source core library of epson.
$ sudo cat /tmp/epson-inkjet-printer-filter.txt
[printJob:483] TRACE IN
[load_core_library:164] TRACE IN
[get_ppd_attr:139] PPD Attribute epcgCoreLibrary -> libEpson_WorkForce_635_60_NX625.so.1.0.0
[load_core_library:181] Failed to dlopen(libEpson_WorkForce_635_60_NX625.so.1.0.0)->/usr/lib/libEpson_WorkForce_635_60_NX625.so.1.0.0: undefined symbol: _ZTVN10__cxxabiv117__class_type_infoE
[load_core_library:242] TRACE OUT=1
[printJob:526] TRACE OUT=1
[eps_heap_usage_end:42] =============================================================
[eps_heap_usage_end:43] HEAP USAGE : max(0 bytes) leak(0 bytes)
[eps_heap_usage_end:44] =============================================================
_ZTVN10__cxxabiv117__class_type_infoE looks like libstdc++ - but I already have that library in /usr/lib
Does someone knows what library does he miss?
Edited:
It was no missing library. It is a really strange problem here. If I build it with my PKGBUILD it will give the error above.
If you go into the $srcdir, compile and overwrite it manually it will work properly.
cd "$srcdir/$_pkgname_filter-$pkgver"
make clean
./configure --prefix=/opt/epson-inkjet-printer-workforce-635-nx625-series
make
cp src/epson_inkjet_printer_filter /opt/epson-inkjet-printer-workforce-635-nx625-series/cups/lib/filter/epson_inkjet_printer_filter
pkgname=epson-inkjet-printer-workforce-635-nx625-series
_pkgname_filter=epson-inkjet-printer-filter
pkgver=1.0.0
pkgrel=1
pkgdesc="Linux printer driver for Epson AIO"
arch=('i686' 'x86_64')
url="http://avasys.jp/eng/linux_driver/download/lsb/epson-inkjet/escp/"
license=('GPL, LGPL, custom:AVASYS Public Licence')
depends=('cups')
makedepends=('rpmextract' 'libtool')
source=(http://linux.avasys.jp/drivers/lsb/epson-inkjet/stable/RPMS/x86_64/$pkgname-$pkgver-1lsb3.2.src.rpm)
md5sums=('e2240acfbad8f965b167f312aeefbfe7')
build() {
cd "$startdir/src"
rpmextract.sh $pkgname-$pkgver-1lsb3.2.src.rpm || return 1
tar xzf $pkgname-$pkgver.tar.gz || return 1
tar xzf $_pkgname_filter-$pkgver.tar.gz || return 1
cd $_pkgname_filter-$pkgver
aclocal
libtoolize
chmod +x configure
./configure --prefix=/opt/$pkgname --enable-debug || return 1
make || return 1
package() {
cd "$srcdir/$pkgname-$pkgver"
install -d "$pkgdir/opt/$pkgname/"
cp -r lib "$pkgdir/opt/$pkgname/"
cp -r resource "$pkgdir/opt/$pkgname/"
cp -r watermark "$pkgdir/opt/$pkgname/"
install -d "$pkgdir/usr/share/cups/model/$pkgname"
install -m 644 ppds/* "$pkgdir/usr/share/cups/model/$pkgname"
cd "$srcdir/$_pkgname_filter-$pkgver"
install -d "$pkgdir/opt/$pkgname/cups/lib/filter/"
install -m 755 src/epson_inkjet_printer_filter "$pkgdir/opt/$pkgname/cups/lib/filter/epson_inkjet_printer_filter"
Edited 2:
Ok, I found the problem. Arch's makepkg will add an "--as-needed" to LDFLAGS and the binary won't be linked to libstdc++.so.6 and libgcc_s.so because the binary does not need it but the core library of epson. I overwrite that with "--as-no-needed" and now it works. Added the package: http://aur.archlinux.org/packages.php?ID=42294
Last edited by Misery (2010-10-29 10:51:02)

Cannot get epson stylus office tx610fw printer to print now that Ive updated to osx mountain lion, have had no success getting my mac laptop to update latest apple update for epson printer

cannot get epson stylus office tx610fw printer to print now that Ive updated to osx mountain lion, have had no success getting my mac laptop to update latest apple update for epson printer

John Blanchard1
Re: can't print to Epson TX610FW
Jul 28, 2012 10:23 AM (in response to normdrexel)
Try installing the Epson drivers from here:
http://support.apple.com/kb/DL1398
and then seeing if adding and printing with USB works.
This site really works and my computer is now printing.

Epson Printer problem "Epson Stylus Photo PX710W" - solved!

Hello All,
My system: OS 10.6.4
I am posting this in the hope that it is useful to someone. Firstly, the printer is great. However, I had a really frustrating time trying to print via Iwork, Iphoto or print off an email directly in a web browser. Each time I did this an error appeared stating there was an error with the library and it failed to print. For me, I really wanted to be able to print from, say the Apple word processing programme "Pages", or print of emails with important details etc. So I persevered and finally came to a solution!
After contacting Epson (and Apple!) a few times one Epson guy gave me the following instructions. Please note I accept no loss or damage directly or indirectly from following this advice if you have the same problem of not being able to print out emails in browsers or print from Iwork, or Iphoto, whether you choose to follow this advice or not is solely your responsibility, however this worked for me:
EMAIL FROM THE EPSON ENGINEER
From the information you have provided, it would suggest that either a communication problem is present or the Mac is unable to display the EPSON driver in the Printer Browser.
It is recommended that all EPSON Printers are removed and re-installed and you repair the communications.
To uninstall your printer:
1. Make sure that the EPSON printer is connected to the Mac through a direct USB connection (not through a Hub or the Keyboard) and switched on.
2. Make sure that the Mac is on and booted.
3. In the Mac Hard Drive/Applications/Utilities open the Printer Set-up Utility.
4. Remove all the references to the printer model.
5. Disconnect the printer from the computer.
6. We will now remove the EPSON Printer driver from the system and delete the drivers that you downloaded.
Go to the Mac Hard Drive/Library/Printer and move the complete EPSON folder to the trash. Warning this removes all EPSON Printers.
7. Also remove any drivers that were previously downloaded to the trash if the file name does not match that from our web site.
8. Restart the Mac.
9. Empty the trash.
10. Now we will run a repair utility that may take up to 30 minutes to complete so please plan for this. Go to Mac Hard Drive/Applications/Utilities and open the Disk Utility.
11. Select Disk First Aid at the top of the dialogue box.
12. Select the Mac Hard Drive Icon in the left hand pane.
13. Select Repair Permissions at the bottom of the dialogue box.
14. When this has completed restart the Mac. Power the printer on and ensure that it is directly connected to a USB port on the Mac and not via a third party device such as a USB hub.
You will now need to download the driver/s from the Epson website. Please connect to the Epson website via the link below:
http://www.epson.co.uk/support
Type in your product in the search field and then select the correct model. Then select your operating system if this is not automatically selected. Then please click the down arrow next to drivers and downloads and download the printer driver for your printer and ensure this starts in the Download Manager. The file may be in a SIT format, which requires Stuffit Expander to expand the compressed files, if you have not installed Stuffit, it is available from:
http://www.stuffit.com/mac/expander
Please try the following to install and add the driver:
1. Locate the downloaded file, if in a SIT format, this requires Stuffit Expander so have Stuffit running.
2. If the file is a .DMG file, you do not require Stuffit, double-click the downloaded EPSON driver file and this will expand to reveal the dmg file and mounted drive.
3. Double-click the blue VISE icon when presented.
4. Follow the on screen prompts to install the driver, restarting the Mac when necessary.
5. Once restarted the driver needs adding to the printer list. To do this please go into the hard disk, go into the folder called Applications, double click on the folder called ‘Utilities’. You should see in this window the ‘Printer Setup Utility', double click on this icon. This will present the Printer List.
6. Delete any reference to the printer that may be on this list already as these may not be the genuine EPSON driver.
7. Click the add icon at the top and a dialogue box will appear, this will be the Printer Browser.
8. Next highlight the printer and then select add printer. Note: Do not choose a printer from the list of Epson printers. Your printer will not appear here, nor will the genuine Epson driver. You should be able to highlight the printer and choose 'Add'. If 'Add' is not available, leave the Printer Browser open and do not do anything else on the Mac, leave it open for about 10 minutes. When you come back to it, you should now find 'Add' available.
9. The printer should now be added to the printer list. Test the printer by highlighting it on the Printer List and selecting 'Utility'. The EPSON Printer Utility will appear, ensure paper is loaded and select to print a 'Nozzle Check'.
If you have an All in One, then to install the scanner component, locate the downloaded EPSON Scan driver and double-click this. The files will unstuff and a window will appear with the EPSON Scan Installer. Double-click this icon to initiate the installation.
11. Once installed, restart the Mac and the scanner should be ready to use. You can test this by going to: Applications : EPSON Scan.
If you require any further assistance please do not hesitate to contact me.
Regards
Steven Wood
e-Service Support Technician

Here was an easy-ish way which I did it:
Step 1) Install the bloated, piece of garbage Epson software so that you have a copy of the driver, or alternatively, just install the driver.
Step 2) go into your router (http://192.168.0.1, user: admin, pass: admin) and set up what's called static ID. Just figure out the MAC address of your printer and assign a unique static ID to it, ie 192.168.0.100
Step 3) go into system preferences> printers> add printer (+)> IP> Line Printer Daemon - LPD and as the address give it the static address you assigned (192.168.0.100). If you installed the driver, it should automatically detect and select it.
VOILA!

New Epson printer compatibility problem?

Hello!
I'm trying to set up a new printer for my parents, who have the iMac G4 running 10.4.11.
My brother-in-law bought an Epson XP-200 Small-in-One printer. On the Epson support page for drivers for this printer,
I selected Mac OSX 10.4.x, and the available driver was Common Updater v9.0, epson14284.dmg.
I downloaded this driver, installed it, and then Added the printer in Printer Setup Utility.
In Printer Setup Utility, the printer was recognized as: XP-200 Series.
For Print Using, I selected Epson.
A list of models appeared, and the XP-200 was not among them (no XP was listed).
But every model listed had the same thing after the model name: Gimp-Print v5.0.0-beta2
So I selected the first model.
The printer does print, but painfully slowly, with terrible output (pale print, and non-black text is rendered in multiple,
different-colored, vertically shifted lines).
It looks like the Utility function (for checking ink, e.g.) isn't available.
Is this an issue of an insufficient driver for an "old" OSX?
Or have I not done the setup right?
Is there new printer that works easily and well with 10.4.11?
Thanks!

HI, sad as it is since Epson Printers really use the same language since Atari days, (escP), no idea who to blame other than Apple changing requirements without real need, but...
https://discussions.apple.com/message/20029794#20029794
https://discussions.apple.com/message/19372846#19372846
https://discussions.apple.com/message/18745736#18745736

Epson Printer Driver v8.31 not showing up on my OSX 10.4.11

When installing a new Epson Printer Driver v8.31 for my Workforce 630 all-in-one printer on my G5 OSX 10.4.11 Power MAC, along with Epson support on the phone, it is not showing up in my Utilities folder. Epson said I needed to contact MAC about changing some settings. The printer was working fine yesterday but not printing today .... like it wasn't there. After trying several things with Epson Support they said I should download the new driver and, as I said, with their guidance it wasn't showing up in my Utilities Folder. When I called MAC Support they referred me here to avoid paying $50 for their support. Any ideas?

Whew, Could be many things, we should start with this...
"Try Disk Utility
1. Insert the Mac OS X Install disc, then restart the computer while holding the C key.
2. When your computer finishes starting up from the disc, choose Disk Utility from the Installer menu at top of the screen. (In Mac OS X 10.4 or later, you must select your language first.)
*Important: Do not click Continue in the first screen of the Installer. If you do, you must restart from the disc again to access Disk Utility.*
3. Click the First Aid tab.
4. Select your Mac OS X volume.
5. Click Repair Disk, (not Repair Permissions). Disk Utility checks and repairs the disk."
http://docs.info.apple.com/article.html?artnum=106214
Then try a Safe Boot, (holding Shift key down at bootup), run Disk Utility in Applications>Utilities, then highlight your drive, click on Repair Permissions, reboot when it completes.
(Safe boot may stay on the gray radian for a long time, let it go, it's trying to repair the Hard Drive.)
If perchance you can't find your install Disc, at least try it from the Safe Boot part onward.
Then remove the instance of the old one & try adding again.
Might try these two...
Mac OS X: About the Reset Printing System feature ...
http://support.apple.com/kb/HT1341?viewlocale=en_US
Might try Printer Setup Repair 5.1...
http://www.fixamac.net/software/index.html

Epson Printer Not Working

I have an Epson Stylus SX510w and since updating to Mavericks the scanner won't work. The printer works fine but the scanner does not.
I have tried using Image Capture, Preview, Photoshop and also system preferences>printers & scanners. In each case I am met with the message 'an error occured trying to connect to the scanner'.
I have the latest software update, I checked, and I even downloaded and installed it again just to make sure (Epson printer driver ver. 2.7)
All suggestions would be helpful. Thanks.

Thanks for the quick response.
The error actually came up after it opened the new window for the scanner preview, and before it warmed up was when the error message occured.
I had actually tried that a couple of times - adding a new printer, removing them both, adding them again - to no avail, and in the "use" field I had checked it was the right model selected as oppsoed to auto.
Believe it or not it worked by when adding it as a new printer, in the "use" field choosing the "select printer" option and manually searching for my printer model. I figured I may as well try that before another printer model and it worked! Who knows why it went in the first place but all is well now.
Hopefully it'll stay that way! Thanks again.

Adding Epson printer

Similar Messages

Maybe you are looking for