Adding External TV Tuner

I just purchased, without the TV Tuner option, and would like to add. I tried the HP USB TV Tuner, but it appears to support only Notebook Computers. Has any one else had any luck with the HP DIgitial USB TV Tuner with this system.
Any other recommended options for adding a TV Tuner to this system. Any suggestions for External TV Tuners if the HP USB will not work.
Thanks

USB is USB - Universal. Plus, the touchsmart internals are notebook technology. As long as the USB tuner is compatible with Windows Media Cener, you are good to go.
... an HP employee expressing his own opinion.
Please post rather than send me a Message. It's good for the community and I might not be able to get back quickly. - Thank you.

Similar Messages

Adding external photo galleries, calendars, etc. in Catalyst

Is there a way of adding external photo albums, calendars (ie. yahoo, google) into a website made in Flash Catalyst?

The short answer is no. If these modules need to be within the design of the Flash Catalyst project, you can add them using Flash Builder to add them in. This method will require some effort and knowledge of ActionScript and the Flex Framework. If these modules need to next to the Flash Catalyst project, then you could modify the produced HTML file that contains the Flash Catalyst element and insert the modules.
Either way, you will have a modest amount of development to add these elements to your project.
Good luck,
Chris

HT202157 Can the Apple TV be added to I-tunes as a device?

Can the Apple TV be added to I-tunes as a device?

Another question?
I rented a movie on the Apple TV.
I have 10 MBPS service and it would not down load.
Never got to see the movie on the Apple TV.
Later I tried to watch the movie on my PC though I-Tunes.
There was no play button to play the rented movie .
Yet when I tried to rent it again I-Tunes told that I had already rented the movie
And asked me if I was sure I wanted to rent again.
Of course no, it told the just play the movie by clicking the play button.
However, there is no play button on I-Tunes screen.
I am really frustrated! !

Adding external jars

Hi,
I have a jar file in the ext folder of BPEL. When i use the class in java embedding activity it says class not found error how do i solve it. Or please tell me the procedure of adding external jars
Edited by: user10545499 on Nov 5, 2008 9:40 PM

To make external Jar files available in your BPEL PM, you could put the files in:
[ORACLE_HOME]\bpel\system\classes
Restart the server, you they are read when BPEL PM is started. If you want them available in the whole J2EE environement, you sould place them in the j2ee enviornment.
Marc

Adding External Jars in Module development

Dear Friends,
                        Actually i am adding an external Jar file in my EJB Module in NWDS.I am using this jar file for converting XML to flat file and i am calling this module from Receiver ommunication channel.For this process, i am importing dom4j.jar file in the EJB Module.I have created a jar file for that module,
                      Now i have created an external Library project for the cause that i have used the external jar file, and i have made following code in the provider.xml file
<?xml version="1.0" encoding="UTF-8"?>
<!DOCTYPE provider-descriptor SYSTEM "library.provider.dtd">
<provider-descriptor>
     <display-name>
      XML2EDI_Library
    </display-name>
     <component-name>
      XML2EDI_Library
    </component-name>
     <major-version>6</major-version>
     <minor-version>40</minor-version>
     <micro-version>0</micro-version>
     <provider-name>
      dom4j.org
    </provider-name>
     <references>
          <reference
               provider-name="dom4j.org"
               strength="weak"
               type="library">org.dom4j.Document</reference>
          <reference
               provider-name="dom4j.org"
               strength="weak"
               type="library">org.dom4j.DocumentException</reference>
          <reference
               provider-name="dom4j.org"
               strength="weak"
               type="library">org.dom4j.Element</reference>
          <reference
               provider-name="dom4j.org"
               strength="weak"
               type="library">org.dom4j.io.SAXReader</reference>
     </references>
     <jars>
          <jar-name>EDI_Module.jar</jar-name>
     </jars>
</provider-descriptor>
I have included 4 references because i have imported following in my ejb module.
import org.dom4j.Document;
import org.dom4j.DocumentException;
import org.dom4j.Element;
import org.dom4j.io.SAXReader;
I am not sure of wht to include in reference target and provider name, I am getting the following exceptions in Message monitoring:
1. AO: Document Exception: org.dom4j.DocumentException: E:\usr\sap\BWS\DVEBMGS00\j2ee\cluster\server0\
2. Nested exception: E:\usr\sap\BWS\DVEBMGS00\j2ee\cluster\server0\
Help me in this issue..
Thanks in advance
N.Jayanth Kumar

Dear Stefan,
                    I will explain my problem here..in brief
1. I have created an EJB Module and adding an external jar dom4j.jar
2. I have the my jndi name as XmltoText
3. In my application-j2ee-engine.xml in my EAR file...i have included :
<?xml version="1.0" encoding="UTF-8"?>
<!DOCTYPE application-j2ee-engine SYSTEM "application-j2ee-engine.dtd">
<application-j2ee-engine>
<reference
     reference-type="weak">
     <reference-target
       provider-name="dom4j.org"
       target-type="application">TEST_LIBRARY
      </reference- target>
</reference>
<fail-over-enable mode="disable"/>
</application-j2ee-engine>
           TEXT_LIBRARY is name of my Library Project.Please tell me corrections in the above code...i have doubt regarding provider name.
4. As i have added external jar file in my ejb module..._i have created a Library project and in that project in provider.xml_ file i have included the following code...
<?xml version="1.0" encoding="UTF-8"?>
<!DOCTYPE provider-descriptor SYSTEM "library.provider.dtd">
<provider-descriptor>
     <display-name>TEXT_LIBRARY</display-name>
     <component-name>TEXT_LIBRARY</component-name>
     <major-version>6</major-version>
     <minor-version>40</minor-version>
     <micro-version>0</micro-version>
     <provider-name>****</provider-name>
<references>
<reference
     provider-name="****"
     strength="weak"
     type="library">****</reference>
</references>
<jars>
         <jar-name>EJBModule.jar</jar-name> (This is my EJB Module jar file)
</jars>
</provider-descriptor>
Now what should i include in the places of **** in the references above??
Thanks and Regards,
N.Jayanth Kumar

Can I extend time capsule by adding external drive connected TC via USB?

Hi,
I use my TC drive for backups, i's now full. Can I extend time capsule backup drive by adding external drive connected TC via USB? If yes, how do I his? I have 1TB WD external drive connected via the TC's USB, I can see the WD drive in the finder and the TC set-up...but I don't know where to go from here...
Thanks for your help
Steveru

Welcome to the discussions, Steveru!
I think what you are asking is can you simply continue Time Machine backups by adding the new USB drive, correct? The answer is not exactly. See below for details.
To use the new USB drive for Time Machine backups, you'll need to Open System Preferences (gear icon) on the dock and open Time Machine. Click on Select Disk and click your USB drive to highlight it, then click Use for Backup. Here's the rub....Time Machine will make a new full complete backup of everything on your Mac's hard drive. There's no way to avoid this. After that, it will continue to make scheduled incremental backups just like it did before on the Time Capsule.
If you ever need to go back to your original backups on the Time Capsule, you'll need to right-click the Time Capsule icon on the dock and choose Browse Other Time Machine Disks.
When the USB drive start to fill, you may decide that you no longer need all the old backups on the Time Capsule disk since you should have a good history of backups on the USB drive at that point.
So, you could erase the Time Capsule disk and then start backing up to the Time Capsule disk again. At that time, it will also make a complete backup on the first pass and then normal incremental backups from that point forward. When the TC begins to fill again, then you could erase the older backups on the USB drive and start backups again on that drive. Then switch to the other drive in the future to keep things going indefinitely. If you go with this type of flip flop plan, you should always have a solid history of many months of backups at any given time.
Will a plan like this work? I don't answer a question on the forum unless I've done it myself. This has been working well for me for almost 3 years.
Pondini, the resident expert on Time Machine and Time Capsule affairs, may have some comments on this as well. If you haven't already seen his excellent guide, Using Time Machine with a Time Capsule or +Time Machine FAQ+, these are the best available sources of information on this subject on the Internet.
Or, if you don't want to erase any your backups, you could of course keep adding a new USB drive when the current drive is about to fill.

I deleted my recently added from i tunes wish to retrieve it

I deleted my recently added from i tunes wish to retrieve it

As Gnome notes, it is just a smart playlist, and quite a simple one at that.
To replace it, use File > New Smart Playlist. Rename the Smart Playlist as "NewTracks" or whatever. Then right-click its name, choose Edit Smart Playlist, and add a single rule: "Date Added" "is in the last" "2 weeks."

Recommend an external tv tuner

What external tv tuner would you recommend that will work well with Mac OS X 10.5? Also, do external tv tuners come with software to watch and record live tv? On my other computer running XP, I used "media center" to do this, though that tv tuner is internal, which is a shame because I could have just used that on my Mac, oh well...

Forrest McElfresh1 wrote:
Elgato's HDHomerun and EyeTV are a good solution, provided you only need ATSC ( digital ) channels. Otherwise EyeTV Hybrid would do NTSC ( analog ) as well as ATSC. The EyeTV software is a good Digital Video Recorder application that works with many harware devices ( tuners ).
http://elgato.com/elgato/na/mainmenu/products.en.html
Thanks

FiOS HD-DVR crashing since adding external eSATA drive

After the recent firmware update, I added an 2TB external eSATA drive to my FiOS DVR. I'd really been looking forward to this because our DVR had been perpetually 90+% full. After a couple of reboots, the drive was recognized and showed as a second DVR at 0% full in the DVR Status menu. Just to make sure everything worked, I scheduled a bunch of recordings to make sure it was utilizing the new drive.
A few days later, we found that the DVR had erased several of our recordings because it was out of space. Checking the DVR status again, the new drive had disappeared.
After a couple of reboots, it appeared in the status menu again, and the DVR started recording to the external drive. But a few days later, my wife couldn't find the recordings. Turns out it had disappeared again.
This pattern has repeated itself several times over the last couple of weeks. On two occasions, the DVR has completely frozen while we were in the middle of watching something, necessitating a complete reboot in order to watch TV, and interrupting any recording that was going on in the background. Each time, at least 2 reboots has been required before the eSATA drive appears.
Needless to say, this whole thing is a disaster. I spent a ton of money and the result is poorer service quality. What can I do to fix this?

After a few minutes searching I found the link of recommended drives.
http://www22.verizon.com/ResidentialHelp/FiOSTV/Other+Hardware/eSATA/129841.htm
Here's a snipet from that page...
Which Verizon FiOS TV DVRs are compatible with eSATA devices?
The following FiOS TV DVRs are compatible with eSATA devices:
Motorola QIP 7216
Motorola QIP 7232
Cisco CHS 435 HDC
Which eSATA external storage devices can I use with my FiOS DVR?
Verizon recommends the eSATA hard drives below for use with FiOS DVR. Customers choosing to install other drive types will assume the risk of compatibility with FiOS DVR and Verizon will not assist with compatibility or performance issues should they arise.
Western Digital – WDBACS5000EBK-NEVZ – 500GB
Western Digital – WDBACS0010HBK-NEVZ – 1TB
Western Digital Retail – WDBABT0010HBK-NESN – 1TB
I'm not sure why this happened...'Your post has been changed because invalid HTML was found in the message body. The invalid HTML has been removed. Please review the message and submit the message when you are satisfied.'
I'm assuming that the above drives were the only one tested at the time. We users can add to this list if we want. Anyone game?

Adding external mail contacts to a distribution group seems to randomly add the user instead of the mail contact

I've added a external mail contact for all my mailbox users because all the users have other jobs and other external email addresses. Since these users don't normally log on to my domain to get email, I need to create a distribution list with all their
external email addresses. I've scripted the creation of all the external mail contacts, from the mailbox users and I use AD's Notes field to contain the users external address. When using add-DistributionGroupMember and supplying the external mail
contact email address as the "-Member" param, about half of the time the users mailbox user gets added to the group instead of the external contact. I don't see any arguments to tell add-DistributionGroupMember to use only mail contacts.
1) I don't even know how it's finding the mailbox user because I'm supplying an external email address which is only in the external mail contact.
2) Some members of the group are correctly added as external contacts, some are mailbox users.
3) I only want the external mail contacts in the group
If it helps, here's the line that I use to add members to the group. I've tried mail enabling the mail contacts, no help...
Add-DistributionGroupMember–identity“AltEveryone”–member(get-QADuser$_.Name).Notes
Thanks for any help.

You should ask questions like this in the Exchange forum. It is not a scripting question but is a product behavior question.
You cannot add an external contact without first creating the contact first.
¯\_(ツ)_/¯

Help need in Adding External jar files.

Hi all,
Iam developing ADF application using JDEV 11.1.1.3.0.
I need to move files from one directory to another so i have used external jar "commons-io-1.4.jar" file.
i did this by going to the project properties -->Libraries and Classpath -->Add Library
added the jat file.
In java class i have used the function
File.copyFileToDirectory(reQueueFile, TargetLocation,false);
it was working fine when i tried in IntegratedWeblogic server but when i deploy in Standalone Weblogic server its not getting the jar file.
Its throwing me the exception
javax.el.ELException: java.lang.NoSuchMethodError: org/apache/commons/io/FileUtils.moveFileToDirectory(Ljava/io/File;Ljava/io/File;Z)V
at com.sun.el.parser.AstValue.invoke(AstValue.java:161)
at com.sun.el.MethodExpressionImpl.invoke(MethodExpressionImpl.java:283)
at org.apache.myfaces.trinidad.component.UIXComponentBase.broadcastToMethodExpression(UIXComponentBase.java:1303)
Please let me know is there a way of adding the lib to the project.
Regards,
Suresh kumar.k

First you should check that the library has the checkbox 'Deploy by default' is checked for your library.
The you open the project properties of the view controller project, select Deployments, edit the deployment descriptor. Select the Node 'File Groups'->'WEB-INF/lib'->'Contributors'. this should give you a list of libraries your project uses. Check if your library has the checkbox checked (is selected fro deployment). If it's not checked, set it.
This should include the library.
Timo

Time Machine issues since adding external drive

System spec:
2012 Mac Mini, quad core 2.3ghz i7, 16gb RAM, OS X Yosemite 10.10.2
Problem:
Today I added an external USB 3.0 1TB hard drive to my Mac Mini - a self powered Seagate one. I want Time Machine (running on another external drive - a mains powered 2TB USB 2.0 Western Digital drive) to back this drive up - so I went into the Time Machine preferences pane and removed the drive from the exclusions list to which it had automatically been added (since TM doesn't usually back up external drives)
I moved some data to the drive and Time Machine began to back this up as expected on it's next run. I went to check the TM drive in Finder to make sure it was backing up correctly when I noticed that the folder for this latest backup wasn't appearing - and that the Latest link went to the backup BEFORE the drive was installed. Both Finder and the Time Machine pref pane correctly showed the TM drive space dropping though - and if I went to Terminal and listed the contents of the Time Machine drive, the folder for the current backup appeared and Latest pointed to it as expected.
I let this backup and a second backup finish - so at this point I have two backups that have run since adding the external drive. The backups appear in the navigator on the right hand side - but they are greyed out compared to the others. If you try to click on one of these greyed out backups, TM scrolls back to an empty Finder window titled "Waiting: ...." and the time the backup ran.
I tried rebooting to fix this - when I checked again after rebooting, Time Machine showed the two backups and both were accessible and navigable within the TM restore interface. This was four hours ago. Three more backups have run since my reboot and they are exhibiting the same symptoms as the ones prior - not showing in Finder, not linked from Latest, and greyed out in the TM restore interface.
While I'm fairly confident the data IS being backed up, this is still going to be a problem if I need to restore. Has anyone seen this before and how did you fix it if so?

Launch the Console application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad and start typing the name.
The title of the Console window should be All Messages. If it isn't, select
SYSTEM LOG QUERIES ▹ All Messages
from the log list on the left. If you don't see that list, select
View ▹ Show Log List
from the menu bar at the top of the screen.
Click the Clear Display icon in the toolbar. Then take the action that isn't working the way you expect. Select any messages that appear in the Console window. Copy them to the Clipboard by pressing the key combination command-C. Paste into a reply to this message by pressing command-V.
The log contains a vast amount of information, almost all of which is irrelevant to solving any particular problem. When posting a log extract, be selective. A few dozen lines are almost always more than enough.
Please don't indiscriminately dump thousands of lines from the log into this discussion.
Please don't post screenshots of log messages—post the text.
Some private information, such as your name or email address, may appear in the log. Anonymize before posting.

Exception while adding External Jar files in NWDS

Dear Friends,
                        Actually i am adding an external Jar file in my EJB Module in NWDS.I am using this jar file for converting XML to flat file and i am calling this module from Receiver ommunication channel.For this process, i am importing dom4j.jar file in the EJB Module.
                      Now i have created an external Library project for the cause that i have used the external jar file, and i have made following code in the provider.xml file
<?xml version="1.0" encoding="UTF-8"?>
<!DOCTYPE provider-descriptor SYSTEM "library.provider.dtd">
<provider-descriptor>
     <display-name>
      XML2EDI_Library
    </display-name>
     <component-name>
      XML2EDI_Library
    </component-name>
     <major-version>6</major-version>
     <minor-version>40</minor-version>
     <micro-version>0</micro-version>
     <provider-name>
      dom4j.org
    </provider-name>
     <references>
          <reference
               provider-name="dom4j.org"
               strength="weak"
               type="library">org.dom4j.Document</reference>
          <reference
               provider-name="dom4j.org"
               strength="weak"
               type="library">org.dom4j.DocumentException</reference>
          <reference
               provider-name="dom4j.org"
               strength="weak"
               type="library">org.dom4j.Element</reference>
          <reference
               provider-name="dom4j.org"
               strength="weak"
               type="library">org.dom4j.io.SAXReader</reference>
     </references>
     <jars>
          <jar-name>EDI_Module.jar</jar-name>
     </jars>
</provider-descriptor>
I have included 4 references because i have imported following in my ejb module.
import org.dom4j.Document;
import org.dom4j.DocumentException;
import org.dom4j.Element;
import org.dom4j.io.SAXReader;
I am not sure of wht to include in reference target and provider name, I am getting the following exceptions in Message monitoring:
1. AO: Document Exception: org.dom4j.DocumentException: E:\usr\sap\BWS\DVEBMGS00\j2ee\cluster\server0\
2. Nested exception: E:\usr\sap\BWS\DVEBMGS00\j2ee\cluster\server0\
Help me in this issue..
Thanks in advance
N.Jayanth Kumar

thanks for you help sidharth.
i have now jar files in the server and the application referring to the jar files. everything is deployed fine. however, when i start the application..i get the error -"package jcifs.smb does not exist". the jar i am using is jcifs-1.2.7.jar. in my web module when i expand the jar i see the package and the .class files inside. what am i missing?
Also, i din't define a SharingReference to usermanagement in portalapp.xml as i am working towards a pure j2ee enterprise application. the web module (DC) referes to the jar files. is there any step similar to defining the sharing reference for the web module DC?
please help. thanks - sowmiyar

Adding External Jar files

Hello,
I have successfully created and deployed a portal application project (par file) that required adding as an external jar the file com.sap.portal.usermanagementapi.jar. Now I am re-doing the project as a development component in NWDI and I can add the external jar file fine and the source code shows no errors. However as soon as I build the DC I get a source error that says the import to com.sap.ip.portal.service.ume.IUserManagementEngine can not be resolved. If I go back to the java build path the usermanagementapi.jar is no longer there.
Do I have to handle the adding of external jar files in a different way for a DC as opposed to a par project?
Thanks,
Bert

thanks for you help sidharth.
i have now jar files in the server and the application referring to the jar files. everything is deployed fine. however, when i start the application..i get the error -"package jcifs.smb does not exist". the jar i am using is jcifs-1.2.7.jar. in my web module when i expand the jar i see the package and the .class files inside. what am i missing?
Also, i din't define a SharingReference to usermanagement in portalapp.xml as i am working towards a pure j2ee enterprise application. the web module (DC) referes to the jar files. is there any step similar to defining the sharing reference for the web module DC?
please help. thanks - sowmiyar

Adding external DOCTYPE causes "UnknownHostException" in x:parse

Hi,
I am using the following JSTL to parse and retrieve data from an xml file:
<c:import url="starfleet.xml" var="sf"/>
<x:parse doc="${sf}" varDom="dom"/>This works great but I am needing to add a DOCTYPE to the XML document:
<!DOCTYPE starship SYSTEM "starfleet.dtd" >As soon as that line is added I get the following error message on the JSP page:
org.apache.jasper.JasperException: javax.servlet.ServletException: javax.servlet.jsp.JspException: java.net.UnknownHostException: starfleet.dtdHowever placing the DOCTYPE internally brings up no problems e.g.
<!DOCTYPE starship [
]>
Any ideas why adding an external doctype is causing an "UnknownHostException"?
Thanks
Edited by: 4fingers on Jan 7, 2010 10:09 PM

Hi Dev,
When you create an external dimension, whether by creating it directly in an XML file or by transforming it from a source file, the dimension must conform to Endeca’s external_dimensions.dtd file before you import it into your project. The dtd file can be found here: $ENDECA_ROOT/conf/dtd. Also make sure to declare the dtd file in your XML:
<?xml version="1.0" encoding="UTF-8" standalone="no"?>
<!DOCTYPE external_dimensions SYSTEM "external_dimensions.dtd">
HTH,
Pankaj.

Adding External TV Tuner

Similar Messages

Maybe you are looking for