Adding Extra Cost in EK02

Hi,
My requirment is basically after getting the cost by EK02, which is the cost per piece. I want to add extra 200 amount on the per piece cost. For example if
Sales Order Quantity = 1000
EK02 / piece = 40
Condition value becomes = 40 X 1000 = 40,000
Adding extra 200 = 200 / 1000 = 0.2
So new cost / piece = 40 + 0.2 = 40.2
Condition value becomes = 40.2 X 1000 = 40,200
Can this be configured in SD.
Appreciate your support
SAPXPT

Hi,
If you are looking for complete solution for all items then, you can configure some condition type with your specification and insert the same in pricing procedure...
and maintain condition record for the same, it will pop up in sales order.
Regards,
Bharat

Similar Messages

HT1338 I PURCHASED PAGES, NUMBERS AND LATEST LION APPS YESTERDAY ON NY MAC AT HOME AND WANT TO UPLOAD ON MY OFFICE MINI MAC ALSO . HOW DO I DO THIS WITHOUT EXTRA COST? STEPHEN

I purchsed pages, numbers and the latest version of lion yesterday on my main mac computer at home. I want them also installed on my mini mac at my sales office without added extra cost , how do I do it ? Also when is is moantain lion comming out I love Siri on my Ipad and want to usse it on my computers?
Stephen

Log in using the App Store on your mini using the same ID used in your original purchases and install the apps.

Using a CC with a Balance Transfer without added interest cost

I have several cards on 0% or low APR BT Offers, and those CC have also made me offers for cash back if I use the card for purchases. How can you do this, if the card is already on a BT, without destroying the low APR on the BT? Easy. An important thing to understand about your credit card statement is that your statement balance can have multiple APR on several different portions of the balance. In this Bank of America example, I’ve got two separate 0% APR with different expiration dates, balance transfers left over from earlier at the purchase APR, and purchases at the standard purchase APR. The amounts shown are not the ending balance, but rather the average balance during the credit card statement period. (even this average balance isn’t exactly what the interest is charged on, because CC interest is charged on a daily percentage, resulting in daily compounding)Before Congress passed the CARD Act, most CC agreements would apply ALL payments to the lowest APR first, meaning in the above example the ~$8k on the two 0% APR would be paid first, all $8k, before even beginning to pay on the ~$500 at the purchase APR. This is a favorable purchase APR, but imagine if the purchase APR was at 19%? To make matters worse, the interest on the purchase APR items would usually add to the Purchase balance, and continue to compound the interest cost on the purchases until all the lower APR items were paid off however many months that took. Needless to say, in the old days it was not a good idea to use your credit card for regular purchases if you had a BT on the card. That all changed with the CARD Act a few years ago. Since the credit reforms of the CARD Act, credit card issuers are allowed to apply the minimum payment to the lowest APR items first. However, after the minimum payment, they must apply payments to the highest APR items. The minimum payment depends on statement balance, but is often only 1% to 2% of that statement balance. In the example above, the statement balance of almost $8k required a minimum payment of only $82. This would be applied to the approximately $8k 0% APR balance first. Any additional payments above the $82 for the month would be applied to the highest APR items next. Actual interest charges usually fall into the higher APR buckets. On the BofA cards, I get little offers for 10% cash back from certain national merchants. HairMasters, Starbucks, Buffalo Wild Wings, Papa Murphy’s, and several others are regularly available to add the offer to the card, use it at the merchant for one purchase, and get 10% cash back. With my Citi Diamond Preferred, I also had a $600 BT offer on the $1k CL, then got a 5% back on $500 of purchases in gas, groceries, restaurants and department stores. My Discover card had several thousand on a 0% BT, then they sent me a “spend $1,000, get $100 back” offer. My US Bank Cash+ has a low APR BT offer, and 5% categories for Department stores. How do you take advantage of the spend offers and not get interest charges? You usually have to accept / sign up for the spend offer, to add it to the card, so do that first. When you use the card for any of the offers, depending on the spend involved in the offer, just keep track of those as they post to your CC account online during the month. You have to wait until the charge amount actually posts to your credit card account, so it is no longer Pending. After it posts, it will be in the “Purchases” bucket of the daily interest charge calculations. Said differently, you cannot prepay these charges, you have to wait for the amounts to show up as Posted on your account online. It only takes a few days after you did the purchase, and you don’t have to wait until the statement cuts to see the amounts, but they do have to post to your account. After a few charges have posted, use the Make a Payment button on your credit card account to arrange an electronic payment from your checking account, to post the same day or in a few days. If you know when charges will hit, you can also schedule such a payment for a few days after, to allow time for the charges to post. Repeat this throughout the month if the spend offer is a long term thing. The amount of the payment you make must cover the Minimum Payment first. I’ll often just send over the minimum payment right after the statement prints, just to get it out of the way. I owe the amount, the BT needs to be paid off, and the Minimum Payment is a small amount anyway. I’ve also got Autopayments set up for all these accounts, which is intended to pay the BT offer over a schedule. I don’t use the Autopayment amount in my calculations of paying the purchase amount, although they would be applied to the purchase amounts. By paying the purchase soon after it posts, and after the minimum payment has been made, the interest rate clock never really gets started on the purchase amount. You may see a minimum interest charge of $0.50 if the card charges that, but often I don’t even get that amount if the payment is soon enough after the charge was posted. Chase Slate and Freedom cards are actually even easier. You can use the Blueprint Full Pay payment selector features to tell Slate the types of charges you want to include as pay in full, and they will add those new charges to your Blueprint payment to pay them above the minimum payment that is going toward the BT payment, and not accrue any additional Purchase interest. The Finish It allows you to set an additional amount you want to pay toward the BT (or purchase charges) principal over the minimum payment, to make the payments faster. So, the point of this is, if you have a BT offer on a card, you don’t have to effectively SD the card, it can be used for purchases to take advantage of special offers, or even for regular charges, without added interest cost.

tjhallow wrote:
But since I don't have any interest on balance transfers and purchases on my discover card right now I usually just make whatever I was making (before the charge) and then I add the new charges in there.If you're 0% on BT's and purchases then this thread really isn't relevant. This is for those that have 0% on BT and >0% on purchases. kdm31091 wrote:
Basically, all this is saying, unless I am missing something, is that if you make purchases and pay them off before statement (i.e. don't carry the extra balance on top of the BT amount) you won't pay interest, which is the case with any CC, whether on a BT or not. I don't see how the rewards offers make any difference here. You're just paying charges as you go to avoid interest accruing.It is basically the same whether there's a 0% offer or not. The OP started this thread to clarify for those that do have a 0% BT offer and still want to take advantage of rewards on the same card without impacting rewards by acrruing interest on new purchases. If the card has no rewards as an incentive for new purchases then it's easy enough just to SD the card until the 0% offer balance is paid off. my-own-fico wrote:
I'm not sure whether to agree, because if you pay the minimum following the statement date and then charge something that you soon pay off, we are talking about two different billing cycles. The billing cycles really don't matter aside from generating a new minimum payment as each cycle closes out. Regardless of cycle the minimum has to be covered first and then new purchases within the given cycle need to be paid off as quickly as possible. The minimum applies to the prior cycle. Additional payment(s) need to be made for purchases in the current cycle.

STO - Extra Cost to be loaded on Receiving Plant - Urgent

Dear All,
I am using STO through MM route.
Now while doing STO, based upon some calculations which are part of the procedure some amount needs to be loaded to the receiving plant.
Now when i am tryiing to use a delivery cost condition, it is creating an extra Accounting document for the same.
What can i do to load some extra cost only to receiving plant... so that my accounting happens in the following manner;
Supplying PLant Db : 2000
Receiving Plant Cr: 5000
PLease help, this is an urgent issue.
Regards,
Jyotsna Loomba

Hi,
Your question is not clear do you want to add freight cost on the receiving plant ?
if so have you created condition for your freight cost with delivery cost as condition
category and added to your STO shema?
Please confirm
BR
Diwakar

Error while adding landed cost G/L account 5207010003 needs DR assignment for dimension 1; fill in DR-related fields

Error while adding landed cost G/L account 5207010003 needs DR assignment for dimension 1; fill in DR-related fields

Hi Rajesh
Go to System Initilization => General Settings => Cost Accounting => Check the Dimension1 has Block Posting.
Relase the Block and add the Document it will add.
With Regards
Balaji

Is the "512GB PCIe-based Flash Storage" on the new mac worth the extra cost? I am comparing with a refurb with better specs (faster CPU, larger hard drive) and from what I undersand the PCIe flash storage is the big differentiator in cost.

hello - i am considering two macbook pros
NEW - http://store.apple.com/us/buy-mac/macbook-pro?product=ME294LL/A&step=config#
REFURB - http://store.apple.com/us/product/G0ML1LL/A/refurbished-macbook-pro-27ghz-quad-c ore-intel-i7-with-retina-display
The refurb actually has a faster processor and a larger hard drive. From what I understand, the big difference in cost is the new macbook pro contains "512GB PCIe-based Flash Storage" versus the refurb "768GB Flash Storage".
Is the PCIe flash storage really worth the extra cost (and smaller size)?
PS - Also I believe the brand new one has 2 GB graphics memory as opposed to 1 GB graphics memory. I don't really care about that as much as I won't be doing a lot of video editing or gaming.

RestonManJavaLuver wrote:
Is she wrong - are these actually going to people's homes, being used, then returned and resold?
Some are some are not. Otherwise Apple has a ton of Mac's sitting around that have been returned by customers under their 14 day No Questions Asked return policy.
But they not just Returned and Resold. They go back to Apple, checked out (Tested) any parts that are not up to spec replaced and then repackaged in a plain white box to be sold as refurbs.

Is the retina display for the new mac book pro worth the extra cost? I'm buying a new mac book pro but not sure about the retina display.

Is the retina display for the new mac book pro worth the extra cost? I'm buying a new mac book pro but not sure about the retina display.

There is a US$10 adapter from old power adapter to new MacBook Pro.
MagSafe to MagSafe 2 Converter
The MagSafe to MagSafe 2 Converter allows you to use the MagSafe connector on your LED Cinema Display, Thunderbolt Display, or MagSafe Power Adapter to charge your MagSafe 2-equipped Mac computer.
For battery life, check the latest Software Update for the fix for most problems.

Why is the calendar adding extra alerts?

I just got my first Iphone and the calendar is adding extra alerts. I'm using a Google calendar which I have used for years with WebOS, BlackBerry, and Windows Phone. This only started happening when I switched to the Iphone, so I'm certain that it's the Iphone causing it.
If I create an event on the Iphone, it will add the extra alert straight after. I literally just created an event with one alert at the time of the event. Straight after creating it I checked the event details and there is a second alert 1 hour before.
If I create an event on www.google.com/calendar, it will add the extra alert after the Iphone has synchronised the calendar. Before that synchronisation the event alerts are unchanged.
Most of the time it's adding a second alert 1 hour before the event time, although I have one instance where it also added a third alert 50.9 minutes before the event time.

I don't find it hard to use at all.

ITunes added extra time to a track

iTunes added extra time to a track after transferring the song from my computer. What do I do to to transfer the song correctly and remove the extra (several minutes) of dead air that iTunes added to the end of the track?

Well....
First of all, let me confirm exactly what you are doing.
I notice you say iTunes is not recognising the change. So when you play the song in iTunes, it does not stop at the new time you've entered, is this correct? Or
is it playing okay in iTunes, but not on your iPod? If this is what's happening, you have Synced your iPod after the change, haven't you? (Any changes you make in iTunes while the iPod is connected to iTunes will almost certainly not be activated on the iPod until you do another Sync.)
(If you manually manage the music on your iPod, you will need to remove the track from the iPod and then put it back on again. Putting it back on should cause the newly revised stop time to be on your iPod.)
So if your stop time is shown (in iTunes) as 2:52, but the track is not stopping at that time - in iTunes - then I suggest you do a repair of iTunes. To repair iTunes, download iTunes and go through the instal procedure. (Do not delete or remove the existing iTunes.) Once the instal procedure sees the existing iTunes, you should see an option to either repair or start new, choose the repair option.
I've had to use the repair iTunes option myself, a few weeks ago, and it fixed the issue I was having. Can't remember what the issue was though!
Finally, if the track plays okay in iTunes but not on the iPod after a new Sync, the only thing I can suggest is a Restore of your iPod. This will remove everything from the iPod and the next Sync put back what it finds in your library. If you manually manage, you will need to put everything back on yourself.

Adding Addictive Cost to avoid Plant to plant cost discripency

Hello gurus,
We have a situation where Plant 1 recieved a sub contracted material which has Freight charges included as we maintained freight orgin group in one plant and we dont maintain freight orgin for plant 2.
So now the issue is when i try to add addictive cost for plant 2 i am unable to do that can somebody tell me step by step process to add the Freight cost it is one time and specific to this material only.
I do not want to extend freight orgin group to the costing sheet of plant 2. so please help me how do i add addictive cost here.
while adding addictive cost i do not see item category overhead, Can some one help step by step process .
Thank you
Prasad

Prasad,
Go to CK74n
Step 1-Enter the material number and Plant number
Step-2- Enter the category usually it should be V but it can be anything else as well
Step-3- Enter the Amount and lot size, cost element
Save it
remember to save it 2 times
And go to ck40n or ck11n to do cost run.
Thank You
Hrusikesh

Confusion about data guard broker - extra cost option?

Dear All,
For 11gR2, I know that Data Guard setup is a free option that comes with Enterprise Edition, you don'r require an additional licence for it.
But I have read somewhere the Data Guard Broker and using DGMGRL is an extra cost option? Is it true?
Kindly help to understand this?
Thanks.

Hello;
It's part of Enterprise Edition.
The following conditions must be met before you can use the broker:
The primary and standby databases must be using the same version of Oracle
Database 11g and each can be installed in either a single-instance or multi-instance
environment. The database must be licensed for Oracle Enterprise Edition or
Personal Edition.
Source:
Oracle Data Guard Broker 11g Release 2 (11.2) E17023-06
Section 2.2 Prerequisites
Best Regards
mseberg

Preview renders adding extra frames exponentially in Premiere Pro CC 2014

Having this strange anomaly happen when rendering previews. The preview render dialogue box starts adding extra frames and the thing becomes an exponential loop gradually moving to 100% but never reaching it even if the render is only 10 frames long.
On a Z800 with dual X5570 12GB RAM Intel processors Nvidia and Blackmagic Decklink 2 video cards.
It most seems to be happening around PPro generated title GFX and with dissolves. The strange thing is I can render small sections by setting discrete in/out render areas, but there is always a small section that won't render. This has just started happening on the latest 2014 update of CC.
Have been using CC for the previous 12+ months without incident, so it would seem to be something in the latest version. Not killing me, but it is a bit strange and kind of annoying.
Anyone else having a similar issue?
cheers Pete.

This sounds like bug that was fixed in the update released this morning (CC2014.0.1. aka, 8.0.1). Please let us know if the update does not resolve your exact issue.

Form Validation using Javascript error when adding extra fields

Hi,
I have a form (with a few fields which require validation) which works just fine. I have added extra fields to the form and require them to validate too. My problem is that they are not showing via the behaviours/validation box and I can't figure out how to sort it! They are contained within the form element. I have tried to delate the original validation and start again but to no avail.
Please can someone help me?
Code below.
Many thanks
function MM_validateForm() { //v4.0
var i,p,q,nm,test,num,min,max,errors='',args=MM_validateForm.arguments;
for (i=0; i<(args.length-2); i+=3) { test=args[i+2]; val=MM_findObj(args[i]);
    if (val) { nm=val.name; if ((val=val.value)!="") {
      if (test.indexOf('isEmail')!=-1) { p=val.indexOf('@');
        if (p<1 || p==(val.length-1)) errors+='- '+nm+' must contain an e-mail address.\n';
      } else if (test!='R') { num = parseFloat(val);
        if (isNaN(val)) errors+='- '+nm+' must contain a number.\n';
        if (test.indexOf('inRange') != -1) { p=test.indexOf(':');
          min=test.substring(8,p); max=test.substring(p+1);
          if (num<min || max<num) errors+='- '+nm+' must contain a number between '+min+' and '+max+'.\n';
    } } } else if (test.charAt(0) == 'R') errors += '- '+nm+' is required.\n'; }
} if (errors) alert('The following error(s) occurred:\n'+errors);
document.MM_returnValue = (errors == '');
//-->
<form action="contact_us.asp" method="post" name="contact" target="_parent" class="contentText" id="contact">
      <table width="100%" border="0" cellspacing="5" cellpadding="0">
        <tr>
          <td width="54%" class="subHeader">Full Name* </td>
          <td width="46%" class="subHeader"><input name="FullName" type="text" id="FullName" /></td>
        </tr>
        <tr>
          <td class="subHeader">Company Name </td>
          <td class="subHeader"><input name="CompanyName" type="text" id="CompanyName" /></td>
        </tr>
        <tr>
          <td class="subHeader">Address</td>
          <td class="subHeader"><input name="Address1" type="text" id="Address1" /></td>
        </tr>
        <tr>
          <td class="subHeader"> </td>
          <td class="subHeader"><input name="Address2" type="text" id="Address2" /></td>
        </tr>
        <tr>
          <td class="subHeader"> </td>
          <td class="subHeader"><input name="Address3" type="text" id="Address3" /></td>
        </tr>
        <tr>
          <td class="subHeader">Postcode</td>
          <td class="subHeader"><input name="Postcode" type="text" id="Postcode" /></td>
        </tr>
        <tr>
          <td class="subHeader">Telephone Number* </td>
          <td class="subHeader"><input name="Telephone" type="text" id="Telephone" /></td>
        </tr>
        <tr>
          <td class="subHeader">Mobile Number </td>
          <td class="subHeader"><input name="Mobile" type="text" id="Mobile" /></td>
        </tr>
        <tr>
          <td height="25" class="subHeader">Email Address* </td>
          <td class="subHeader"><input name="Email" type="text" id="Email" /></td>
        </tr>
        <tr>
          <td height="30" class="subHeader">Status*</td>
          <td class="subHeader"><select name="StatusClass" id="StatusClass">
            <option selected="selected">Please Choose</option>
            <option>Architect</option>
            <option>Interior Designer</option>
            <option>Private Client</option>
            <option>Student</option>
            <option>Trade Enquiry</option>
          </select>          </td>
        </tr>
        <tr>
          <td height="23" class="subHeader">Project*</td>
          <td class="subHeader"><select name="Project" size="1" id="Project">
            <option selected="selected">Please Choose</option>
            <option>Planning Stages</option>
            <option>New Build</option>
            <option>Refurbishment</option>
            <option>Barn Conversion</option>
            <option>No project - information only</option>
          </select>          </td>
        </tr>
        <tr>
          <td height="37" class="subHeader">How did you hear about us?*</td>
          <td class="subHeader"><select name="CameFrom" size="1" id="CameFrom">
            <option selected="selected">Please Choose</option>
            <option>Web Search</option>
            <option>Grand Designs</option>
            <option>Living Etc</option>
            <option>Home Building & Renovation</option>
            <option>Architect</option>
            <option>Friend/Family</option>
            <option>Magazine/Editorial</option>
            <option>Newspaper Article</option>
            <option>Trade Show/Exhibition</option>
            <option>Other</option>
          </select></td>
        </tr>
        <tr>
          <td height="24" class="subHeader">Brochure Request </td>
          <td class="subHeader"><input name="Brochure" type="checkbox" id="Brochure" value="checkbox" /></td>
        </tr>
        <tr>
          <td class="subHeader">Message</td>
          <td class="subHeader"><span class="style4">
            <textarea name="Message" id="Message"></textarea>
          </span></td>
        </tr>
        <tr>
          <td class="subHeader"> </td>
          <td class="subHeader"><input name="Submit" type="submit" value="Submit" /></td>
        </tr>
        <tr>
          <td colspan="2" class="subHeader"><em>* Required fields</em></td>
        </tr>
      </table>
      </form>

whoops..... forgot to post this line of code which was a bit further down the page...
"MM_validateForm('name','','R','number','','RisNum');return document.MM_returnValue">

I have an account with Adobe CC on My main PC, can I install it on My secondary PC at no extra cost?

I have an account with Adobe CC on My main PC, can I install it on My secondary PC at no extra cost?

Cloud License allows 2 activations http://www.adobe.com/legal/licenses-terms.html
-Install on a 2nd computer http://forums.adobe.com/thread/1452292?tstart=0
-Windows or Mac does not matter... 2 on the same, or 1 on each

Selection Tools (Polygonal Lasso, Pen Tool) adding extra selections

Ok, so I'm having a weird problem in Photoshop CS4 for Mac OS X on 10.6.3. When I try to make a selection and complete the selection Photoshop is just randomly adding extra selections. Here is an example:
Above, I made a pretty straight-forward selection with the Pen Tool, nothing fancy or anything.
And then, when I right-click and Make Selection I get this crazy selection above that is no where near what I had originally selected.
It does this with the Polygonal Lasso Tool as well. I've tried reseting the tools, restarting Photoshop, and restarting the whole Mac and the problem won't go away and now it's starting to drive me crazy.
Anyone have any idea on what is causing this and how to fix it? Please and thanks!

I wasn't sure how to search for the problem, and anything I did find didn't offer a solution. If you could point me to some of these posts that would be awesome. Thanks.

Adding Extra Cost in EK02

Similar Messages

Maybe you are looking for