Adding fading in effect to titles?

Hey. I want the title i have put in my movie to slowly fade in, instead of just appearing. I have done the research but was unable to find the method. I have adobe premiere cs4. Thank you for the help in advance, i really appreciate it.

do i really need to download a plug in to have the titles fade in? I dont think its that special of an effect... when i say fade in i mean liike, at first the title is not visible, but as time passess the title becomes more visible and visible until its fully in view. Its like a standard title function. Even windows movie maker has it i believe

Similar Messages

Fading an effect

(I will preface this by saying I am completely unfamiliar with how to use keyframes in this or any other application.)
I have been occasionally applying pretty severe effects for short opening title sequences which use the first few seconds of the principal video content. I've 'faded' these effects out to the clip's normal look as the titles end by using the Cross Dissolve effect. With the release of 10.0.1 & 10.0.2, however, I found that the crossfade lost track of time: I'd see the ghosts of movement from the overlapped clips: something shifts in time.
I always kind of knew I was cheating and that the crossfade effect wasn't the best way of doing this.
How can I use keyframes to fade an effect in or out? I haven't had much luck just playing with things.
Many thanks in advance...

It depends on the effect. Most have some kind of Amount function. To fade out an effect click the + button.
Go forward in time, and click the + button again, then set the Amount value to zero. That will fade the effect out over time.
You can also keyframe in the video animation HUD in the timeline.

Playback has frozen in Premiere Pro CS6, it started when I added some after effects compositions to

Playback has frozen in Premiere Pro CS6. I am running a 1080p timeline and it appeared to start when I added some after effects renders to my timeline. The playback head still runs through the timeline and audio plays normally but the video completely stops and cannot be viewed in real time.
I have plenty of memory and a very good graphics card running 64Bit Windows 7.

Red, yellow, and green render bars and what they mean
http://blogs.adobe.com/premierepro/2011/02/red-yellow-and-green-render-bars.html

How do i disable sound effects for titles in imovie on ios?

Hi,
I just got imovie for my iphone. Not bad so far.
Except: how do I turn off sound effects for titles? I just want to add titles to my movie like regular imovie on my mac (or even windows movie maker). However each subtitle has a sound effect -
How do I turn these off or disable?
thank you!

No.....
But....
http://www.logicprohelp.com/forum/viewtopic.php?t=10694
Note: See Rounik's post further down the thread.. for the FX version....
or....
Personally I use Ski's method documented here...
https://www.logicprohelp.com/forum/viewtopic.php?f=1&t=85291

Flicker/flash in top and bottom when adding the "Gaussian" effect to clip.

I get a flicker/flash on the top and bottom of one of the clip where I have added the "Gaussian" effect. A "white - black - white - black" flash. This happened just to one of many clips with the same gaussian effect.
It seems as if the flash happens on every other frame.
Anyone know how to fix this?
I tried taking screenshots of the clip/flash - but it did not show that well in the picture..

Couple of ways to go this. Simple way make the clip a compound clip and apply the letterbox to the compound. Open the compound and do the straightening and rotating inside the compound.

Where can i find the most popular common effects and title template for free online?

where can i find the most popular common effects and title template for free online?

Hello,
I have a couple of links that I have used:
http://www.solarisinternals.com/wiki/index.php/ZFS_Best_Practices_Guide
http://www.solarisinternals.com/wiki/index.php/ZFS_for_Databases
These are not exactly new, so you may have encountered them already.
List of ZFS blogs follows:
http://www.opensolaris.org/os/community/zfs/blogs/
Again, there does not seem to be huge activity on the blogs featured there.
jason.
http://jarneil.wordpress.com

Help! Applying Effects to Titles

Hi there,
Why can't I successfully apply effects to titles (black background/white letters) without the title going bright white after rendering??? In preview mode everything looks great. I reopen file and try again, but it never works.
Any amount of advice would help this frustrated beginner. Thanks!!!!!!!!

Matthew,
Thanks for the reply.
I have a iMac G5, and so far the following effects have had this problem: rain, fog, letterbox. I did however get letterbox to work in a previous project I worked on a few months ago. But can't get them to work since.
I'm using iMovie 5.0.2 (oops am I in the wrong discussion room?)
Greener

Disable fading visual effect for all session users

Hello guys,
someone can say me how I can disable fading visual effect on windows 2012 R2 RDS?
All session users have these visual effect that I don't know how to disable.
Thanks
Andrea

Hi,
Thank you for posting in Windows Server Forum.
Firstly please try to provide TP’s reply, in addition to that you can check below settings on server and see the result.
You need to edit parts of System Properties-Performance Options as per below snap.
Snap:
For more information, refer beneath articles might help to solve your issue.
1. Disable visual effects in Windows
2. Program menus slow when accessed through Remote Desktop / Terminal Services
Hope it helps!
Thanks.
Dharmesh Solanki

Black background of title turns color when adding fairy dust effect

I have iMovie HD 5. I created a title using the animated gradient effect with orange font color and with the "over black" box checked. i then went to add an effect to the title clip, the "fairy dust" effect. After the effect is applied, the black background changed to the orange font color. In the previews, the background remained black when I added the effect. What can I do? Thank you
-Annie N
iMovie HD 5 Mac OS X (10.4.4)

Welcome to discussions, Annie!
Please read this Apple Article:
iMovie: Adding effects to a clip with titles may make it become gray or tinted
http://docs.info.apple.com/article.html?artnum=301248
Sue

Effects on titles

For some reason any effect I put on a title is not working... It just rolls through the effect and then jump cuts to the title. Even with just a dissolve. Anyone else having this problem??? They work when they are un-rendered but as soon as you render them to no longer work.
Phil

Thanks Jeff, it's good to know it works, I'll give you some details first and then you can tell if you need me to get you any screens.
Well to give you a quick run down. I drag and drop transitions over my desired location and this has worked for every transition in my sequence, except the title. I've tried adding black video over top of the title and fading it in, nope doesn't work. The funny thing is it plays back fine in the program window, but refuses to render like all the other effects in my sequence and of course doesn't export. In the case of adding a key frame it goes through the motions of rendering but I end up with the red line of death still appearing above the effect in my title.
I have a new Dell t3500 workstation with quad xeon, quadro nvideo video card and 3 hdd's with captured video and audio on one, previews write to another, and applications on the main drive.

Applying effect to title background mask?

I am trying to create a title for FCPX 10.1.4 with Motion 5 (the latest version).
I want it to be a lower third with a blurred background so that the footage is still identifiable but doesn't distract from the text. Imagine this like a normal lower third with a rectangular background the text is projected on, just that the background is not a solid color but the blurry image of what's underneath. I used a Gaussian blur effect for the footage and a mask that fades in and out, unfortunately this leaves me with a black background in FCPX and the only thing visible is a small portion of the background, blurred and beneath the title. I would like the black background to be the normal background and not the black color. None of the compositing settings seem to work. I tried adding a drop zone but unfortunately that adds a second source and it's very complicated to pick exactly the footage that lies underneath the title when it appears. The background color in Project Settings has no effect on the title so when I set that to white the outcome is still a black screen.

Easy. You can't duplicate the Text Template background layer, but you can make a Clone layer of it. Put the Clone layer on top! Apply the Gaussian Blur to that Clone layer, and then use the Crop tool to crop it down to where you want it. I'd still put a drop shadow on the text, though.
Anything you do to the original layer gets done to the Clone, but what you do to a Clone is NOT transferred to the original layer.

Adding spry fade effect to thumbnail gallery??

Hi,
I have a gallery page with a set of thumbnail images each linking to a main image.
I would like to add a simple javascript fade in for each main image. So when the user clicks on the thumbnail, the main image will fade in.
I took a look at the spry effects page (http://labs.adobe.com/technologies/spry/samples/effects/fade_sample.html) but this uses an onclick event and my code already has some onclick events:
<a onclick=\"document.images.galPic.src='$imgSRC'; document.getElementById('$captionDIV').innerHTML='$imgTITLE';return false;\" title=\"$imgTITLE\">
...so i'm not sure if i can add the onclick events for the fade which is:
onclick="firstFade.start();"
Any ideas how i can get this to work?
Thanks for any help
B

hi, thanks for the reply.
This just applies a fade to whatever is being clicked i.e. i add this to the div container where my big image will appear and when I click on this image the main image fades out. However i want the big image to fade in when the thumbnails are clicked.
Here's the html:
<div id="left">
                <img src="images/jpg25.jpg" title="kawasakigreen">
</div>
<div id="right-gallery">
                    <div class="gallery">
<a onclick=\"document.images.galPic.src='$imgSRC'; document.getElementById('$captionDIV').innerHTML='$imgTITLE';return false;\" >
<img src="/images/gallery/thumb_1.jpg" alt=""/>
</a>
<a onclick=\"document.images.galPic.src='$imgSRC'; document.getElementById('$captionDIV').innerHTML='$imgTITLE';return false;\" >
<img src="/images/gallery/thumb_2.jpg" alt=""/>
</a>
<a onclick=\"document.images.galPic.src='$imgSRC'; document.getElementById('$captionDIV').innerHTML='$imgTITLE';return false;\" >
<img src="/images/gallery/thumb_3.jpg" alt=""/>
</a>
<a onclick=\"document.images.galPic.src='$imgSRC'; document.getElementById('$captionDIV').innerHTML='$imgTITLE';return false;\" >
<img src="/images/gallery/thumb_4.jpg" alt=""/>
</a>
                 </div>
</div>
So each thumbnail references a bigger image dynamically. I think i may need to add an onclick event to the thumbnail but I don't know how.
Is there any other way to achieve a fade in on the bigger image when a thumbnail is clicked?
Thanks
B

How to save video effects for title templates?

I just started playing with Premiere Pro CS4.
I have a beginners question, hope you don't mind:
In my video I use a third-low title to tell the name of songs played. I put them in a bin, basically just copy the first one and change the names in the copies. But when I add them to the timeline I noticed it looks much more professional to add a video-effect where opacity goes from 0 to 100% in a second, and then the other way at the end.
My problem is that I seem to have to do this over and over again, for each title. Is there a simple way to make one title-template, put it on the timeline, add video-effects, and then save that and make copies just changing the text in time-line? That would save me a lot of work, and the video-effects would be consistent in looks and timing.
Thanks for any hints or tips for this newbie.
/Ronny

You will also find links to many
free tutorials in the PremiereProPedia that will quickly show you how things are done in Premiere Pro.
Cheers
Eddie
PremiereProPedia (
RSS feed)
- Over 300 frequently answered questions
- Over 250 free tutorials
- Maintained by editors like
you
Forum FAQ

Fading spry effect

Why if I'm trying the fade effect from the behaviors panel,
my image isn't fading? Does it not work on images? Can my image not
be placed in a table cell? I placed a div tag in front of "img src"
Please help, thanks.

http://alanvalek.com/mock_baker_site/untitled.html

Adding a button to the title bar

I need to place a button in the upper-right corner of an NSWindow's title bar. In Interface Builder, I can place a button in the correct spot, but it is always beneath the title bar. To work around this, I'm currently using a subclassed NSWindow with a borderless mask and creating the title bar, including the stoplight buttons, from scratch.
Is there a better way to do this or a way to re-order my button on top of a title bar? It seems like there should be a simpler way to achieve this effect.

> Is there anyway to change what the window is called when
it's
> minimized?
The name you type into the file properties is the name you
will see when the
file is minimized.
Steve
ACE - Adobe Community Expert, Authorware
My blog -
http://stevehoward.blogspot.com/
Authorware tips -
http://www.tomorrows-key.com

Adding fading in effect to titles?

Similar Messages

Maybe you are looking for