Adding Favorites selects only mobil number
Using iOS 7.0.4 I am trying to add Favorites to the phone app. No matter which phone number I select, the app always saves the MOBILE phone number in Favorites (if there is a mobile phone number associated with the selected contact). How can I save e.g. the WORK PHONE in Favorites?
You could enter the contact twice, once with the mobile and once with the other number and favourite both
Similar Messages
-
Selecting only required number of rows in an external table
Hi,
I have an external table with many flat files as source.. I know I can skip rows using the keyword 'SKIP'. I want to select only first 'n' rows from all the flat files as the rows available in my oracle external table. Is this Possible?...
eg..
Flat file 1
c1,c2
123,45
132,56
'ahgh',34
'dfd',22
Flat file 2
c1,c2
56,1212
545,45
'ahcsd',4
'dds',24
I want to create a file which contains the rows, means only the 2nd and 3rd rows from each flat files
123,45
132,56
56,1212
545,45
Thanks in Advance
PouloseIf this means selecting from all these flat files at the same time then it might get a bit cumbersome. Basically you will have to create an external table for each flat file and then do something like this:
SELECT * FROM
( select c1, c2 from
( select c1, c2, rownum as rn from ext_table_1 )
where rn in (2, 3)
union all
select c1, c2 from
( select c1, c2, rownum as rn from ext_table_2 )
where rn in (2, 3)
union all
select c1, c2 from
( select c1, c2, rownum as rn from ext_table_3 )
where rn in (2, 3)
union all
/Cheers, APC -
It will not allow to select my mobile number to send an revive message only lets me select the email
Go to Settings/Messages and log out. Do the same for Settings/FaceTime. Then go here: https://selfsolve.apple.com/deregister-imessage and deregister the old number. Finally, log back in to Settings/Messages and FaceTime.
-
Cannot send text message to one mobile number
Recently moved from iphone 4 to iphone 6 and changed the carrier from Tmobile to Verizon, post this change I am not able to send text message to one specific mobile number. The other person can send text to my number. The message sent to this specific phone number from iphone 6 appears green as sent but is not received by the other specific number. I can send messages to all the other friends but not to this specific number. The other person reached to his carrier (Tmobile) and they confirmed that it is not coming in their network after doing the testing from my end. This problem started when moved from Tmobile to verizon.
Hi,
This was already checked with the Tmobile carrier and their technicians as test from verizon side. It is not that it is not being received on their network, the issue is it is not being sent out from Verizon network. I have checked in my online account of Verizon with my SMS usage and it shows that no SMS has been sent out to this T-mobile number. I have tried sending SMS 30 - 40 times and there is no record in my online account about the SMS sent out. This means that the SMS is not going out from verizon network to this specific user. I hope I have made myself clear here in terms of issue definition. I have tried all possible options of deleting message thread, deleting contacts at both the sides, resetting network, switching off imessage, Airplane mode on-off, sending SMS by adding 001 to the mobile number etc.
Kindly help urgently. -
I recently bought a BlackBerry Z10 and moved my cell service to Rogers to take advantage of the name display service offered by Rogers (Fido also offers this service).
Due to the number of calls that I receive from first time clients, I wanted the name display service to help me know who was calling. Evidently it is impossible to add clients to my contact list before they call me so I'm constantly seeing numbers that have no name to help me decide if I want to answer the call.
When I try to add a caller from my call list to my contact list, only the number gets inserted in the new contact. The name needs to be entered manually.
I understand and realize that not all call display formats are the same and that it's virtually impossible to parse the first and last names from the name portion of the caller id.
However, I would like to see BlackBerry add the functionality to insert the name portion of the call entry from the caller list to a "Nickname" entry in the contact list just like it adds the number to a "Home", "Mobile", or "Work" entry in the contact list.
If a user doesn't have a name display service, there would be no change to how their contacts are added because there is no name variable to copy over.
Can someone from BlackBerry please let me know if this feature can be added to BB10 and when it can be added? For me it's an obvious feature that should just work.
I am really enjoying my Z10 but I'm feeling let down that something so logical and helpful is not supported out of the box.
Regards,
MarcHey ViciousFerret,
It appears that you are not aware of the fact that both Rogers and Fido offer name AND number display service (although the name display feature is an add-on service) and have been offering it for many years (since 2006). Here is a link to the name display service description of each provider...
http://www.fido.ca/web/content/manageyourcalls/calldisplay&lang=en
http://www.rogers.com/business/on/en/smallbusiness/products/wireless/addons/valuepacks/
As you can see from the link below, Rogers and Fido have been offering this service since 2006.
http://www.businesswire.com/news/home/20060914005951/en/Teams-HP-Rogers-Wireless-Fido-Succeed-North
My BlackBerry Z10 shows both the name and number when someone calls (and the caller is not in my contact list).
All I would like is for the Z10 (and Q10) to support the addition of the name and number from the caller list to my contact list without me having to type the name. As I mentioned in my original post, to avoid the OS having to parse the first name and last name from the name portion of the caller list entry the name could simply be added to the contact list as a "Nickname". If your provider only has number display, nothing would have to be copied from the name variable in the caller list to the contact list.
I find it difficult to believe that BlackBerry would not be aware of this name display service since it's been around since 2006 with both Rogers and Fido.
I hope I have clarified the reasons why I would like to have this feature added to BB10 and how it's surprising that this simple feature is not already a part of the BB10 OS.
Either way, I don't think this is a difficult feature for the BlackBerry team to add. They're just copying a 2nd variable from the caller list to the contact list.
I'm surprised that Rogers hasn't asked BlackBerry to add this feature to their phones. I think it would be a popular feature for those who receive a high number of calls from first time callers.
How can I get this feature request to BlackBerry for their consideration?
Cheers,
Marc -
How do I get my messages to come through on my ipad Via my mobile number? They always used to but I've had to change all my Apple ID if that has anything to do with it? In iMessages it will only take an email address!
Hi EmilyWick123!
Here is an article that will help you address this question about linking your Apple ID and phone number:
iOS and OS X: Link your phone number and Apple ID for use with FaceTime and iMessage
http://support.apple.com/kb/ht5538
Thanks for being a part of the Apple Support Communities!
Regards,
Braden -
Anyone help with linking a bank account to your apple id. The form wants a phone number I only have a UK mobile number and it doesnt sem to want to accept it keeps l;ooping me back to entering a phone number.
If you are trying to setup a charge card number on the Apple Store - make sure you are in the Correct country site - icon bottom right last time I saw it - where you can change country.
-
Messages: adding mobile number
I did something really silly today. On my phone I added an email address (my appleID) which could be used to send from if needed. The result was that my mobile number was immediately disabled as an option to send from (let alone the preferred option) and it was removed as one of the options from my computer messages account. It has also been removed from my ipads.
I am now having a brain **** and have no clue how to bring that number back. Its my preferred method to send from the mobile number, and my friends quickly get tired of trying to work out which conversation they need to send to if they want to contact me.
Please. someone remind me how to get that mobile number functioning for messages on computer and ipad.
TIA
SueAnd the solution (for those others who also seem to want it) is at the bottom of the page at
http://support.apple.com/kb/HT5538 -
How do you get only a contacts mobile number to show up when sending text....
On the Droid, when you typed a contact in the "To" line of a text message, only their mobile number showed up. On the Droid X, all contacts phone numbers show up. Very annoying. Anybody know how to fix this? Thanks in advance for any help/suggestions.
Check the settings for your messaging app and see if there's a show only... option. I use handcent on my Eris and I know it has the option.
-
How do I identify the mobile number in Messages?
Hello,
This isn't really an issue, more of a usage question.
When I start a new message from the Messages app, and start typing a contact name, I am presented with a list of numbers/email address for that particular contact. The issue is that the list doesn't identify which number is that person's mobile number, they all show up as available to send a Text Message to.
I have a feeling this is just "how it is", but I wanted to pose the question to see if anyone has come up with a clever way to work around this. Here are a couple of pictures to show what I am talking about:Hi,
In this area Messages is a disaster.
The FaceTime does have a way you can move people to an Favourites List even though the initial listing is from the Contacts App.
Messages does not have this.
Once you have connected to someone the valid iMessages contact in the drop down gets a blue speech bubble indicator.
I have noticed now though that other (non iMessages ones) are being listed as potential "text" ones even though they have not been used and do not have the green indicator for SMS chats. This does mean my Land Line is lists as a Text potential item at the moment where it used to be an iMessages Potential one in the past.
Whilst I did set up Contacts with a Group called "Regulars" I have found no way to have that show first in the Blue + icon selection method (far right after starting a New Messages) It can then be selected. It cannot be used as an option in the "To" spot drop down though.
The "Buddies" option just list those from the Buddy List accounts you have without distinguishing between Off Line and Available Buddies very well (they are marked in Green, red and Amber and then nothing. They are also doubled up if a person is in two or more Buddy lists if they have AIM and Jabber IDs for example.)
The group in the Contacts App is the closet to the FaceTime Favourites I have achieved.
However the cards added here may still show multiple telephone numbers such as Mobile the works and home Land Lines (only a partial move to what your want).
Of course it could be worse...
10 Logged in Accounts in addition to iMessages listed on at least three Contacts Cards (for three Computers) with some not linked to Address Card/Computers but basically listing all the workable connections between them.
I have not found a good work around for listing just the numbers you want.
8:42 pm Wednesday; January 14, 2015
iMac 2.5Ghz i5 2011 (Mavericks 10.9)
G4/1GhzDual MDD (Leopard 10.5.8)
MacBookPro 2Gb (Snow Leopard 10.6.8)
Mac OS X (10.6.8),
Couple of iPhones and an iPad -
IMessage on MacBook Pro - how to use mobile number?
So I upgraded to 10.8.2 on ML and IOS 6 on other devices. I notice on the iPhone that my iMessages can be received by default only to the mobile number.
I previously turned iMessage off because frankly it was a complete PITA and more trouble than it was worth. The mess created for recipients with messages coming from apple IDs when sent from the iPad and from a mobile number on the phone, then messages sent from one not showing on the other, replies not going from one device becase there was no internet available but the message had come to the apple ID and not the phone number etc etc. The woes went on. iMessage thus went off.
Now, the ability to use the phone number as the default across decvices did sound appealing and I THOUGHT that when I activated imessage on the Mac and iPad it would automatically show up with the option to use the mobile number on those devices. Instead I just get the email option and can see phone number at all.
Am I correct in assuming that I need to add the Apple ID so messages can be sent there BUT configure it somehow so that iMessages going out from those devices are sent as coming from my mobile and not an email address? last thing I want is the dog's breakfast that the last incarnation of iMessage brought and I would hope this time around that "It just works". I'm gettng more and more used to having to probe around with Apple though, to find ways to make it work.Finally got this to work, coincidence or not i'm not sure, maybe the system was just catching up. On the iPhone I ONLY had the telephone number enabled. I then added the Apple ID and all the test messages arrived, as did the mobile number verify message. I then went and turned the Apple ID email off as a 'receive at' source. After that the mobile number was verified on the Macbook and was available to add as an iPad 'email address'.
-
IMessage not selecting my phone number, its "greyed" out.
I have an iPhone 4S and it was on a monthly 02 contract but I have not terminated my contract with O2. I had my iPhone unlocked so I could use it on any network. I now have a Vodafone sim card in the phone and am on PAYG. However my iMessage is not working properly. When I try to active my iMessage my phone number is "greyed" out so I cannot send messages via my mobile number ...so can only send text messages. I did use the Vodafone sim card in my iPhone whilst my number was being ported across so it did have a temporary number. However, now my original number has been ported across I can no longer select it under iMessage as it is "greyed" out.
How do I resolve this?Still Problem... I delete my account ID from My daughter's phone and used her iCloud email account and both of us still have same massage "waiting for activation for Message and face Time setting. Still I can see my daughter's phone number in my phone "you can be reached by face time at" and I can able to check it as well as my e-mail address but my phone number is greyed out... Ok just want to verified I can't able to face time using my phone number anymore? I don't have any option to delete my daughter's number or my e-mail address only I can add e-mail's.... I tried trouble shootings step by step but still stack in same way...` any suggestion ?
-
My ipad stopped sending texts from my mobile #, I have an iPhone 5s. It now sends texts only from my email. How do I add my phone number back on to the ipad?
Go to Settings>Messages>Send & Receive at>You can be reached by iMessages at>check (select) your iPhone number in there - if it is appearing. If the phone number does not appear, try turning Messages off on both the iPhone and the iPad. Restart both devices. Turn Messages on the iPhone first and activate it. Then do the same on the iPad and hopefully the phone number will be accessible again.
-
How to assign select only privilage to a user application wise..?
1-i have a function checking for a user_id and password it works fine.
2-i have a procedure checking for the user privilage
Both 1 and 2 stored in a package library,both called from 'ok' button on the main form as follows:
DECLARE
V_USER_ID users_codes.USE_ID%TYPE;
V_PASSWORD users_codes.use_pass%TYPE;
V_EXIST BOOLEAN;
v_insets USERS_PRIVILAGES.I%TYPE;
v_deletes USERS_PRIVILAGES.D%TYPE;
v_retrieves USERS_PRIVILAGES.R%TYPE;
v_saves USERS_PRIVILAGES.S%TYPE;
AL_ID NUMBER;
BEGIN
V_USER_ID :=:TI_USRCOD;
V_PASSWORD :=:TI_USRPSW;
:GLOBAL.USR_CODE :=V_USER_ID;
:GLOBAL.PASSWORD :=V_PASSWORD;
V_EXIST :=SECURITY_NEW.LOGON_AUTH ( V_USER_ID ,
V_PASSWORD );
IF V_EXIST = TRUE THEN
SET_ALERT_PROPERTY('NOTE',ALERT_MESSAGE_TEXT,'V_EXIST = 1 ');
AL_ID := SHOW_ALERT('NOTE');
ELSE
SET_ALERT_PROPERTY('NOTE',ALERT_MESSAGE_TEXT,'V_EXIST = 0 ');
AL_ID := SHOW_ALERT('NOTE');
END IF;
IF V_EXIST =TRUE THEN
SECURITY_NEW.Menu_Status ( V_USER_ID ,
v_insets ,
v_deletes ,
v_retrieves,
v_saves );
MESSAGE(' Priv Exist' ||V_USER_ID||', '|| v_insets||' , '|| v_deletes||' , ' ||v_retrieves||' , ' ||v_saves);
:GLOBAL.insets :=v_insets;
:GLOBAL.retrieves :=v_deletes;
:GLOBAL.deletes :=v_retrieves;
:GLOBAL.saves := v_saves;
END IF;
CALL_FORM('F_Frame_MDC');
END;
==========================================================
Above code returns my parameters just fine.
My doubt now is:
1-how can i give alll privilages to user1.
2-how can i give Select only privilage to user2.
==========================================================
For clarification i used the following code in a when-new-record-instance
--when_new_block_instance
--result protected to be updated
DECLARE
BEGIN
-- MESSAGE(' Priv' ||:GLOBAL.insets ||', '|| :GLOBAL.retrieves||' , '|| :GLOBAL.deletes||' , ' ||:GLOBAL.saves );
-- MESSAGE(' Priv' ||:GLOBAL.insets ||', '|| :GLOBAL.retrieves||' , '|| :GLOBAL.deletes||' , ' ||:GLOBAL.saves ); IF :GLOBAL.insets =0 THEN
IF :GLOBAL.insets =0 THEN
Set_Block_Property('MISSION_CODE1',INSERT_ALLOWED,PROPERTY_FALSE);
Set_Block_Property('MISSION_CODE1',UPDATE_ALLOWED,PROPERTY_FALSE);
Set_Block_Property('MISSION_CODE1',DELETE_ALLOWED,PROPERTY_FALSE);
MESSAGE('ÚÝæÇð ÇáãÓÊÎÏã ÑÞã'|| ' ' || :GLOBAL.USR_CODE || 'ÛíÑ ãÓãæÍ ÈÇáÅÏÎÇá Ãæ ÇáÊÚÏíá ');
RAISE Form_Trigger_Failure;
ELSIF :GLOBAL.insets =1 THEN
Set_Block_Property('MISSION_CODE1',INSERT_ALLOWED,PROPERTY_TRUE);
Set_Block_Property('MISSION_CODE1',UPDATE_ALLOWED,PROPERTY_TRUE);
Set_Block_Property('MISSION_CODE1',DELETE_ALLOWED,PROPERTY_TRUE);
END IF;
IF :GLOBAL.retrieves =0 THEN
Set_Block_Property('MISSION_CODE1',QUERY_ALLOWED,PROPERTY_FALSE);
Set_Block_Property('MISSION_CODE1',DELETE_ALLOWED,PROPERTY_FALSE);
Set_Block_Property('MISSION_CODE1',UPDATE_ALLOWED,PROPERTY_FALSE);
Set_Block_Property('MISSION_CODE1',INSERT_ALLOWED,PROPERTY_FALSE);
MESSAGE('ÚÝæÇð ÇáãÓÊÎÏã ÑÞã'|| ' ' || :GLOBAL.USR_CODE || 'ÛíÑ ãÓãæÍ áå ÈÇáÅÓÊÚáÇã ');
RAISE Form_Trigger_Failure;
ELSIF :GLOBAL.retrieves =1 THEN
Set_Block_Property('MISSION_CODE1',QUERY_ALLOWED,PROPERTY_TRUE);
Set_Block_Property('MISSION_CODE1',DELETE_ALLOWED,PROPERTY_FALSE);
Set_Block_Property('MISSION_CODE1',UPDATE_ALLOWED,PROPERTY_FALSE);
Set_Block_Property('MISSION_CODE1',INSERT_ALLOWED,PROPERTY_FALSE);
END IF;
IF :GLOBAL.deletes =0 THEN
Set_Block_Property('MISSION_CODE1',DELETE_ALLOWED,PROPERTY_FALSE);
Set_Block_Property('MISSION_CODE1',UPDATE_ALLOWED,PROPERTY_FALSE);
Set_Block_Property('MISSION_CODE1',INSERT_ALLOWED,PROPERTY_FALSE);
MESSAGE('ÚÝæÇð ÇáãÓÊÎÏã ÑÞã'|| ' ' || :GLOBAL.USR_CODE || 'ÛíÑ ãÓãæÍ áå ÈÇáÅáÛÇÁ ');
RAISE Form_Trigger_Failure;
ELSIF :GLOBAL.deletes =1 THEN
Set_Block_Property('MISSION_CODE1',DELETE_ALLOWED,PROPERTY_TRUE);
Set_Block_Property('MISSION_CODE1',UPDATE_ALLOWED,PROPERTY_TRUE);
Set_Block_Property('MISSION_CODE1',INSERT_ALLOWED,PROPERTY_TRUE);
END IF;
IF :GLOBAL.saves =0 THEN
Set_Block_Property('MISSION_CODE1',DELETE_ALLOWED,PROPERTY_FALSE);
Set_Block_Property('MISSION_CODE1',UPDATE_ALLOWED,PROPERTY_FALSE);
Set_Block_Property('MISSION_CODE1',INSERT_ALLOWED,PROPERTY_FALSE);
RAISE Form_Trigger_Failure;
ELSIF :GLOBAL.saves =1 THEN
Set_Block_Property('MISSION_CODE1',DELETE_ALLOWED,PROPERTY_TRUE);
Set_Block_Property('MISSION_CODE1',UPDATE_ALLOWED,PROPERTY_TRUE);
Set_Block_Property('MISSION_CODE1',INSERT_ALLOWED,PROPERTY_TRUE);
END IF;
END;
========================================================
I even tried to take the concerned parts in key commit and key-delrec
but it was only disabled 4 both users and then when press exit button it saves alll changes...
========================================================
It's urgent,immediate help will be much appreciated
Thanks in advance,
Regards,
Abdetu..
==========================================================Hello Christain,
i am so sorry but there was problems in the internet connections so i wasn't able to reply to u immediately..
Well,ur guidelines to Globals as they r always charaters was a new info to me that make me change:
-the query,the return values when checked or unchecked it now returns n or y in the privilage forms which affects the behaviour of the select statment in my priivilage procedure instead of returning 0 or 1 it is now returning n or y.
-most importantly,either it was n or 0 i called themas characters from any form in the (WNFI Trigger) if :GLOBAL.INSERTS ='Y'
THEN SET_ITEM_PROPERTY.....etc.
-->what do you mean with "NULL values"? plz clarify...
i am displaying messages with the returned values from the called parameters assigned to the Globals in my loginForm,so if there is a privilage checked it returns with y if not it was previously returned with null.
--i aslo changed the where condition in my privilage procedure instead of :
BEGIN
SELECT I
INTO v_inserts
FROM USERS_PRIVILAGES
WHERE USER_ID = P_USER_ID
AND ( I = 'Y'
p_i :=v_inserts;
to the following :
===========
BEGIN
SELECT I
INTO v_inserts
FROM USERS_PRIVILAGES
WHERE USER_ID = P_USER_ID
AND ( I = 'Y'
or I = 'N');
p_i :=v_inserts;
============================================================
Then i yahoooooo it returns with both n and y values then a college at work made the following function:
===============
FUNCTION Change_Block_Property( Block_Name In Varchar2 , Process Varchar2 , Val_Flag Varchar2)
RETURN BOOLEAN
IS
Block_ID BLOCK;
BEGIN
--WRONG_ALERT('WRONG_PASS','íÌÈ ÊÕÍíÍ ÅÏÎÇá ÇáÈíÇäÇÊ');
Block_ID := Find_Block( Block_Name);
IF Process = 'Insert' And Val_Flag = 'N'Then
Set_Block_Property(Block_ID , INSERT_ALLOWED , PROPERTY_FALSE);
Set_Block_Property(Block_ID , UPDATE_ALLOWED , PROPERTY_FALSE);
Set_Block_Property(Block_ID , DELETE_ALLOWED , PROPERTY_FALSE);
End IF;
IF Process = 'Query' And Val_Flag = 'N'Then
Set_Block_Property(Block_ID , QUERY_ALLOWED , PROPERTY_FALSE);
Set_Block_Property(Block_ID , DELETE_ALLOWED , PROPERTY_FALSE);
Set_Block_Property(Block_ID , UPDATE_ALLOWED , PROPERTY_FALSE);
Set_Block_Property(Block_ID , INSERT_ALLOWED , PROPERTY_FALSE);
End IF;
IF Process = 'Delete' And Val_Flag = 'N'Then
Set_Block_Property(Block_ID , DELETE_ALLOWED , PROPERTY_FALSE);
Set_Block_Property(Block_ID , UPDATE_ALLOWED , PROPERTY_FALSE);
Set_Block_Property(Block_ID , INSERT_ALLOWED , PROPERTY_FALSE);
End IF;
Return True;
End;
=========================================================
and called this Function from (wnfi Trigger) as:
==================================
Declare
V_EXIST Boolean;
BEGIN
IF :GLOBAL.Insets = 'N' THEN
V_EXIST := ATT_SECURITY.Change_Block_Property ( 'EMP_MISSIONS' , 'Insert' , 'N' );
End IF;
IF :GLOBAL.Retrieves = 'N' THEN
V_EXIST := ATT_SECURITY.Change_Block_Property ( 'EMP_MISSIONS' , 'Query' , 'N' );
End IF;
IF :GLOBAL.Deletes ='N' THEN
V_EXIST := ATT_SECURITY.Change_Block_Property ( 'EMP_MISSIONS' , 'Delete' , 'N' );
End IF;
End;
=======================================================
To Handel the only case that return with no privilage assigned to a user
and it finallyyyy on the dead moments of losing hope the darkness of don't know how turns to light and i works fine..
==========================================================
thank u Christian u r a friend indeed,i reappologize for not beeing on line with u..
Thank u very much for the loyal help u offered to me and the useful tips to refine and optimize my code...
Kissess and Hugs Christian
====================
Best regards,
Abdetu.
========================================================= -
I would like to be reached at my iMessage with my mobile number and not my email address
I would like to be reached at my iMessage with my mobile number and not my email address
If you're finding that iMessage & Facetime is showing your email as default & your number is greyed out so can't select it then try signing out of iMessage & Facetime & signing in again.
Maybe you are looking for
-
How can I use Back to My Mac using my Apple ID
I'm having problems accessing my other computers using Back to My Mac. I've gone into System Prefference>iCloud and turn on Back to My Mac on all mey devices. I've have also gone into my router settings and opened the appropriate ports. I can see my
-
Please have a look at my site www.roosboum.nl and try ctrl- and ctrl+ to zoom. If you compare this with any version of IE or Chrome you'll find that since version 14 FF has stopped properly outlining the backgroundimage. Also I noticed in other pages
-
Any problem with 6110 navigator?
Hi, Does anyone has any problem with your 6110 navigator? It seems like the phone always reset on its own and hang whenever the alarm clock goes off. I have sent it back to nokia care center, they upgraded my firmware but it hang when the alarm clock
-
Hello, If my form does a host('cmd /c dir > d:\output.txt') I get the resulting listing on my application server but if I do a host('cmd /c net send myhost ping > d:\ouput.txt) I get an output.txt of size 0 and no message is sent. I have tried sendin
-
Strange issue - XI somtimes process a file and sometimes its not detected
Dear friends, We have a strange problem. Ill describe the situation: We have a simple file to file scenario without any mapping or File Content Conversion. Daily a sender system puts a ZIP file on a server and XI processes this file. The strange thi