Adding field BKPF-XREF1_HD in FBL1N/FBL3N dynamic selection

Hi Friends,
Is there any possible way to add the BKPD-XREF1_HD field to FBL1N and FBL3N transactions?
I tried thru SE36 but no result.(BRF)
As per my knowledge both are line item related process which contains other than BKPF table entries. Bue my client wants to add in the Dynamic selection as it available for FB03 transaction.
Please adivse what are all the ways to do that or is there any SAP notes available for possible or not possible solution.
Plaase reply.
Thanks & Regards
Sankar.
Edited by: sankar babu on Jun 25, 2010 11:54 AM

Hi,
have a look at this OSS Notes:
1.-
Note 984305 - Line item: Definition of special fields (T021S)
https://service.sap.com/sap/support/notes/984305
2.-
Note 215798 - FBL*N: Special fields are not displayed
https://service.sap.com/sap/support/notes/215798
use the search button of the forums and you´ll find more information.
Best regards.
Edited by: Pablo Casamayor on Jun 25, 2010 1:20 PM

Similar Messages

FBL1N with dynamic selection WITHHOLDING TAX CODE is dropping rows

Using FBL1N with dynamic selection field: WITHHOLDING TAX CODE and noticed that several vendors dropped off the report. Appears FBL1N's filter logic uses LFB1-QSSKZ and not LFBW-WT_WITHCD. Upon examination, I determined that the missing vendors didn't have a WTC assignment (column is BLANK) in table LFB1. Problem is I'm using transaction FK02's WITHHOLDING TAX ACCT tab to assign the WT codes but these rows are written to table LFBW (not LFB1). How is the LFB1-QSSKZ field populated? And why do some of the entries in LFB1-QSSKZ have values while others do not? Would ultimately like to populate the blank assignments with the correct WT code.

Hi Steve,
This is due to the limitation due to standard design.
You can see that a vendor can be assigned to multiple WHT codes and can also have multiple WHT code for a single line item. Hence in FBL1N output it would not be possible to show the WHT code as there is no one to one relationship.
You can click on the line item and can then see the WHT information in WHT button. Or alternatively get the data in withholding tax information reports.
Regards,
SDNer

FBL3N - Dynamic selection ignores BSEG-NPLNR

Good afternoon to all:
I want to add BSEG-NPLNR (Network) to the dynamic selection for FBL3N.
I use SE36 to add BSEG-NPLNR to the selection view of logic database SDF, but FBL3N ignores the selection I enter there.
I read in OSS note 310886 that fields from BSEG are ignored in the dynamic selection even though they are added to the selection view of the logical database SDF.
What is the other option to add BSEG-NPLNR to the dynamic selection of FBL3N?
Thanks

if you want to add BSEG-NPLNR (Network) to the dynamic selection for FBL3N you must first set at least, one key param of the logical data base (transaction FBL3N use SDF Logical Database).
The key params of this logical database are:
Chart of Accounts
G/L account
Company Code
if you set any of this 3 params, your BSEG-NPLNR filter will work, otherwise, it will be ignored.

Report FBL3N dynamic selection

Dear all,
Please help me with deriving a field Reference key 1 on the selection screen of FBL3N. How can I add this field in the dynamic selection?
Thanks a lot,
Desimira

HI,
When you are in FBL3N report go settings in the menu bar,
settings --> special fields ---> then add reference key( reference key 1 (XREF1), and reference key 2 (XREF2).
) (you can also reach this customizing in SPRO)
after you add this special field you have to run a program in SE38
RFPOSXEXTEND.
now then you can use this field.
Go O7F4 to add fields.

Enterable field BKPF-XREF1_HD(Ref.key (header) 1)?

Hi
Friends,
Does anyone know how to make the XREF1_HD and XREF2_HD fields on table BKPF available so they may be populated during document entry (FB01, FB50, etc.)?
I know there is no cofiguration for this., only through substitution we can able to display.
(Q) How to do substitution for the above subject? How to make this field enterable during document entry.
Thanks
Anil

Hi
Friend,
Iam working for US Client, I have an issue.
Special handling code u2013 Identify a field in Vendor master or Vendor Invoice and pass this data on to IDOC
HQ1 - Check to be sent to XXXX HQ or to vendorIdentify a field
FX1 u2013 To vendor address by Fedex
(Q) we have to give this code in XK01 or FB60? for this purpose I need Ref.key (header) 1), It is 3digits No code. I can use Ref field in BKPF, but already am using this field.
Thanks
Anil

Add field GKONT in Transactions FBL1N, FBL3N, FBL5N

Hi folks,
is it possible in SAP Standard to add the field GKONT in the transactions (mentioned above).
I did not find a way to add it. In Customizing there is a path in customer and vendor accounting to add additional fields, but the field GKONT can not be found.
The customer says it would have been possible at SAP in the company he worked before, but I guess it must have been an adaptation.
Any ideas or opinions?

Hi Heiko,
I woulsd post this message in FI-section of sdn forum.
I think there are experts, who are more fanliliar with this kind of stuff.
Good luck and a nice week end
Joe

Adding BKPF_XREF1_HD field for FBL3n and FBL1N dynamic selection

Hi Friends,
Is there any possible way to add the BKPD-XREF1_HD field to FBL1N and FBL3N transactions?
As per my knowledge both are line item related process which contains other than BKPF table entries. Bue my client wants to add in the Dynamic selection as it available for FB03 transaction.
I tried thru SE36 but no result. (BRF)
Please adivse what are all the ways to do that or is there any SAP notes available for possible or not possible solution.
Plaase reply.
Thanks & Regards
Sankar.

Hello Sankar babu,
These fields need to be setup as Special Fields in T021S. You can do this by the following path in IMG:
Financial Accounting->General Ledger Accounting->G/L Accounts-> Line Items->Display Line Items with ALV->Define Special Fields for Finding and Sorting Data. (transaction OBVU).
Please check SAP note 207436. It describes you how you should act to see the field XREF* in transaction FBL*N.
Regarding the Special Fields, please see SAP Note 215798. This note will explain that the special fields need to be in table T021S as well as in the RFPOSXEXT structure which can be verified in SE11. If these fields are not yet in RFPOSXEXT see Note 215798 (you can verify this in RFPOSXEXT by going to the bottom of the structure and see under column 'Component' that special fields are denoted by 'U_XREF1'). You may see a field XREF1 under the 'Component' column, but these fields are NOT the special field. The special field is denoted by U_fieldname!!!
However, the field BKPF-XREF1_HD is used in Real Estate module. In this field, you can define control information for all line items.This field is used in third-party management in RE to assign a business transaction to a third party.
Please note that table BKPF is not directly selected in the logical database, so the usage of the field in the selection views in SE36 will not work. So you may have to create the field in the index tables.
I hope this information helps.
Thank you.
Suresh Jayanthi.

Extend dynamic selection for a field added on PRPS table

Hi Gurus,
I want to see the field that I've added in PRPS table as part of dynamic selection on the reports like S_ALR_87013542/ S_ALR_87013532. The LDB for project systems is PSJ. How do I make it appear as a dynamic selection on the selection-screen criteria for these reports?
Thanks...

Hi,
We have done this a lot on my project. Follow these steps:
(1) Transaction SE36 for logical database PSJ
(2) Choose menu path Extras -> Selection views (Ctrl+F7)
(3) Change the "Origin of view" to SAP
(4) Find the PRPS_R node in the top, right "Tables/nodes" view.
(5) Double-click PRPS_R.
(6) Find your custom field that you added in PRPS (in the bottom "Table fields/node fields" view.
(7) Choose and enter a 2-character Function Group ID (see the top, left view) next to the new field.
(8) Save and transport...
Best Regards,
James Gaddis

How to add a new Field in the Dynamic Selection screen section.

HI,
There is a requirement in which I need to add a field in existing program of dynamic selections.
I need to add a field KNKK-DBRTG (Customer Rating) in dynamic selections screen of some existing report
which has a dynamic selection screen with other fields like customer account, company code etc. Along with this i need to add Customer rating field also in the selection screen.
I have used GET KNKK statement to select this in the Dynamic selection screen. But I need to make it appear
on the screen.
LDB used is the Customer Database.
I have added GET KNKK statement after GET KNA1 statement.
Can any one help me how we can make this rating field appear in the selection screen.
With the GET statement Credit control area Fields can be selected in the selection screen but I have to permanantly add the field in the selection screen.
Regards
Prashant Prabhu

Hi,
So you need that this new field have data in old records?
1.- If you are in BI 7.0 and the logic or data for that New field are in the same Dimension, you can use a Remodeling to fill it. I mean if you want if you want to load from a Master Data from other InfoObject in the same Dim.
2.- If condition "1" is not yours.
First add the new field, then create a Backup Cube (both cubes with the new field) and make a full update with all information in the original Cube. The new field willl be empty in both cubes.
Create an UR from BackUp_Cube to Original_Cube with all direct mapping and create a logic in the Start Routine of the UR (modiying the data_package) you can look for the data in the DSO that you often use to load.
To do that both cubes have to be Datasources ( right click on Cube-> aditional function-> and I think is "Extract Datasource")
Hope it helps. Regards, Federico

Adding field in the selection-screen of a zprogram

hi gurus,
i have to add field in the selection-screen of oppurtunities. in database i have a field salesvalues, some of oppurtunity guids have this field value. first i need to add in selection-screen in this alv report. and fetch the data from ztable into required field . if the input fields of the salesvalues field id filled, then filter the global guids(from global table which had the guid values already) with this guids related to salesvalues. and if one single guid mathes to 2 values of salesvalues then concatenate 2 values with comma and display in single field. if select-options are blank then fetch all opportunity guids which have salesvalues. pls give solution.

Hi Srini,
Thanks for your Reply
I have kept 01 against the field BSEG-AUGDT and selected the preselect check box also.
But still that field is not visible in the dynamic selection screen.
Thanks
Ajay.D

Making dynamic selection parameter an onscreen parameter

Dear Experts,
I am search on threads regarding defining new fields and adding fields to dynamic selection options, however I have not found an answer to my issue. I need to add a field XBLNR (Reference) currently in the dynamic selections of FBL1N and FBL3N into the general selection parameters in the entry screen. Option of user going through the dynamic selection and creating variant of FBL1N is not optimal. It is prefered to have the field XBLNR (Reference) as an on screen parameter.
How can I achieve this? I checked SE36 and OBVU to no avail. Did I miss something?
Thanks for your time, Deb

Also check this out:
http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/b0e0039a-0d79-2c10-0aaf-9f6c062c0ffb?QuickLink=index&overridelayout=true
http://ficoexpertonline.com/archive/Volume_05_(2006)/Issue_05_(May)/V5I5A2.cfm?session=

Dynamic Selections for the F.42 report

Hii Experts,
I want to add a field called Business Place(BUPLA) in dynamic Selection in tcode F.42.
So, in F.42 KDF Logical Database is used, so i make a Custom Selection view for KDF database.
Business place is successfully added in Dynamic Selection, but it doesn`t reflect when i execute F.42.
When i test from SE36, it reflects.
Nitin Garg

Note 50370 explains in full detail how the system works for selecting the documents with dynamic selection.
Balance report reads the transaction figures which are stored with the help of several different fields, so the selection according to further fields cannot be proceed. This is standard design.
The dynamic selection for Document Data does not work for reports which use customer / vendor transaction tables (KNC1 LFC1),i.e., document data like doc.number and Doc.date is not stored in transaction tables.
Dynamic selections can only be used with customer / vendor, company code
or fiscal year fields. The following reports are affected by this
program design.
S_ALR_87012186 - Customer sales
S_ALR_87012082 - Vendor Balances in Local Currency
S_ALR_87012093 - Vendor Business
S_ALR_87012079 - Transaction Figures: Account Balance
S_ALR_87012080 - Transaction Figures: Special Sales
S_ALR_87012081 - Transaction Figures: Sales
S_ALR_87012105 - List of Down Payments open at Key Date - Vendors
S_ALR_87012172 - Customer balances in local currency
RFKSLD00 - F.42
RFDSLD00 - F.23
Hope this clarifies.
Kind Regards
Soumya

Unable to enhance dynamic selections in FAGLL03

Followed Note 945932 to extend FAGLFLEXA by adding the fields to CI_FAGLFLEXA.
The fields (BSEG-XREF3) appeared in the dynamic selections but if I try to use the field, it throws the following error:
===============================================================================================
MSITEM 103 - Custom selections deleted because fields not active in ledger
Custom selections deleted because fields not active in ledger
Message no. MSITEM103
Diagnosis
Either you have entered custom selections or you have switched between ledgers and had already entered custom selections for the previous ledger.
System Response
From the custom selections, the program deletes any entries for fields that are not active in the ledger currently selected.
Procedure
If necessary, adjust the custom selections for the currently selected ledger.
===============================================================================================
Is there anything else that I need to do to use the dynamic selections ? How do I activate the field in the ledger ? Looks like most of the fields in the ledger are being read from the totals tables - FAGLFLEXT.
Any help will be greatly appreciated.
Thanks
Sridhar

SE16 - added the fields in FAGLFLEXA as per the note. It said not to add an "append structure". So I went in and added the field directly.

Dynamic selections -reg.

Dear All,
In the report fbl3n,there is no field called "entry date" in the dynamic selections tab. Is it possible to add this field to the dynamic selections tab. Kindly advice me in this regard.
Regards,
P.Krishna Chiatanya.

In Top you see Blogs and Articles link, you will see useful documents.
For forums visit:
http://www.sdn.sap.com/irj/scn/forums
For wiki visit:
http://www.sdn.sap.com/irj/scn/wiki
For blogs visit:
http://www.sdn.sap.com/irj/scn/weblogs
For Articles visit:
http://www.sdn.sap.com/irj/scn/articles-topic

Enhancing Dynamic selections

Hi
I need to add a field BKPF-USNAM in dynamic selections screen of report FBL5N.
I need to add in the Documents folder of Dynamic selections,
The folder Documents contains fields of BSIS and some of BKPF table.
I need to make it appear on the screen, I know in the LDB selections,
there is field selection for BKPF table, I can see field Entry date appear on the dynamic selections, I dont know how to make appear other fields from BKPF table.

Hi
I need to add a field BKPF-USNAM in dynamic selections screen of report FBL5N.
I need to add in the Documents folder of Dynamic selections,
The folder Documents contains fields of BSIS and some of BKPF table.
I need to make it appear on the screen, I know in the LDB selections,
there is field selection for BKPF table, I can see field Entry date appear on the dynamic selections, I dont know how to make appear other fields from BKPF table.

Adding field BKPF-XREF1_HD in FBL1N/FBL3N dynamic selection

Similar Messages

Maybe you are looking for