Adding field from Custom Infotype in Screen Header-PA30

Hi all,
Can we add the fields from custom infotype to the screen header in PA30? When I tried through Change Screen Modifications, I could not see the custom infotype in the Infotype column, so I could not select the required field.
Please guide.
Thanks in advance.

Hi,
When you take a drop down from the infotype column, you will see a window with infotypes. By default, it is restricted to 500 entries. To change that, click on the narrow bar under u201Crestrictionsu201D (has a downward arrow) and change the maximum number of hits to 999. You will then get all the infotypes including the custom ones.
Hope this helps.
Donnie

Similar Messages

  • Adding fields from KOMK structure to screen painter.

    Hello Everyone,
    i have created an Extra tab(like ADDITIONAL DATA B) using BADI, i have added fields from VBAP table, its working fine. But when i add fields from KOMK structure(KOMK-STCEG) only empty field is showing. Do i need to code something in PBO or PAI?
    Thanks & Regards,
    NarsiReddy Cheruku.

    Hello NarsiReddy,
    I assume that you have linked the field KOMK-STCEG using "Get from Dictionary" option from your above screenshot.
    In PBO section, make sure to write the logic to update the value in the field. The logic which you would build, would be based on your requirement. For instance, you can use BELNR to check and its corresponding STCEG could be found in the structure KOMK.
    But if the KOMK structure itself is not filled with any value, then there is some problem with your code. Try to check your BADI and its corresponding structures which would get updated at runtime and use them appropriately.
    Thank you.
    Regards,
    Naresh

  • EHP5 ESS - Add Additional fields from custom infotype on Personal Data

    Hi Gurus
    I am able to launch the Personal Information screen under Personal Profile
    I will need to add more fields on the Personal Profile --> Personal Data section
    I have added the infotype in V_T7XSSPERSUBTY
    I am not sure if I will need to do some configuration GenIL Model Editor
    Is BADI (Enh. Imp) HRESS_PER_CONFIG_KEY relevant to adding fields to the screen?
    Please guide how to go about doing this
    Thanks in advance

    for adding a infotype and fields you need to do this
    1. Customizing the Fields in Overview Screens
    http://help.sap.com/erp2005_ehp_05/helpdata/en/77/804c18e1844944b7f8baf5
    3159be78/content.htm
    2. Configuration of Personal Profile Services
    http://help.sap.com/erp2005_ehp_05/helpdata/en/3a/fe6eac579d4a9ead651d77
    9a2dbd23/content.htm
    3. Personal Profile application Documentation
    http://help.sap.com/erp2005_ehp_05/helpdata/en/14/60cd56b1514ae5aa811d2a
    a4a59de3/content.htm
    In EhP5 ESS Personal Profile application, in order to change the
    Address overview page fields, you need to adapt the Address component
    configuration HRESS_CC_PER_OVR_ADDRESS_XX.
    Note: In EhP5, ESS screens are based on Floor Plan Manager for
    WebDynpro ABAP Generic UI Building Block concept. To configure
    overview page fields we no longer use 'Determine Fields for Business
    Card on Area Page' View instead of that we adapt the FPM configurations.
    In the standard delivery in the Overview Page, always international
    Address is displayed and in the edit screen based on the country
    selection (Foreign Address scenario), corresponding country screens
    are displayed.
    Note: We always show international address screen in overview page in
    order to support Foreign Address scenario.
    If you want to chanage the fields in the Address overview page fields
    then adapt the Address component configuration.

  • Delete entries from custom infotype overview screen

    Hi
    I have the requirement to delete few fields from overview screen(Screen 3000) from my custom infotype.
    Can I go to screen 3000, and CUT (delete) the fields which are not required? or any other procedure?
    Did anyone get similar requirement?
    Please help me in this regard.
    Thanks in advance.

    HI
    I tried hiding it with the help of code.
    Still not able to achieve the result.
    THe below is the code what I am using.
    Please check it and suggest me.
    if psyst-ioper EQ 'LIS0' or
        psyst-ioper EQ 'LIS1' or
        psyst-ioper EQ 'LIS9' .
         loop at SCREEN.
      if screen-name EQ '*P9009-ZWCADM' or screen-name = 'P9009-ZWCADM'.
        screen-active = 0.
        endif.
        MODIFY SCREEN.
      endloop.
      endif.
    Still able to see the fields on the screen.Not being hidden.

  • Adding Fields to Custom Infotype Using Custom Infoset in SAP QUERY

    Hi All,
    We have a requirement to add fileds to a custom infotype for querying Custom Infoset in SAP Query.
    We are facing problem as the added field is not getting displayed in the Query set so that we can select and display it in the Basic List along with the other filds.
    Kindly suggest a solution.
    Full points will be rewarded.
    Thanks in Advance
    Kumar

    Hi Salman,
    Thank you for your valuable information. I haven't Configured Dynamic Actions yet. Is it simple to write the Logic for Dynamic Actions. Is this the only way to solve this Issue?
    I tried by adding the standard fields, but they are not populating the values; but just appearing as Input Fields with Input help option.
    Please let me know if you have any suggestion in this direction?
    Regards,
    Hems.

  • Showing fields of Custom infotype in standard infotype screen

    Hi Experts
      I have created a custom infotype 9xxx. Now when I go to the PA30 maintenance screen for a standard infotype 0795, i should also see the fields from custom infotype 9xxx. Can you please let me know how I can enhance the standard infotype 0795, since SAP does not allow me to change it directly.
    Thanks
    Neo

    Hi,
    I'm gonna be an *ss and ask why you wanna see the fields of your 9xxx - infotype in SAP IT0795.
    If this is for information purposes, I believe this should be incorporated in reporting and not within master data infotypes.
    Wilfred.

  • Adding new fields in Custom Infotype

    Hi,
    I need to change some fields of Custom Infotype. But project is already gone live for 1 country. will making changes to infotype affect for existing live country?
    Safe side....We are thinking Adding new fields in Custom Infotype. & displaying corresponding fields for countries in another tab
    & hiding the old tab.
    Please let me know procedure for  Adding new fields in Custom Infotype for displaying in new tab.
    Edited by: Sachin Thigale on Aug 23, 2010 7:04 PM
    Edited by: Sachin Thigale on Aug 23, 2010 7:05 PM

    Please search. Lot of Threads on this.
    Follow these steps.
    Go to Transaction PM01.
    2) Enter the custom Infotype number which you want to create (Should be a 4 digit number, start with 9).
    3) Select the u2018Employee Infotypeu2019 radio button.
    4) Select the u2018PS Structure Infotypeu2019.
    5) Click on Createu2026 A separate table maintenance window appearsu2026
    6) Create a PS structure with all the fields you want on the Infotype
    7) Save and Activate the PS structure
    8) Go back to the initial screen of PM01.
    9) Click on u2018Allu2019 push button. It takes a few moments.
    10) Click on u2018Technical Characteristicsu2019. Infotype list screen appears
    11) Click on u2018Changeu2019(pencil) button
    12) Select your Infotype and click on u2018Detailu2019 (magnifying glass) button
    13) Give u2018T591Au2019 as subtype table
    14) Give u2018T591Su2019 as subtype txt tab
    15) Give your subtype field as subtype field
    16) Save and come back to PM01 initial screen
    17) Click on u2018Infotype Characteristicsu2019 u2026 Infotype list screen appears
    18) Click on u2018Changeu2019 (pencil) button
    19) Click on u2018New Entriesu2019
    20) Enter your Infotype number and short text
    21) Here we have to set different Infotype Characteristics as per the requirement. (Better open another session with some standard Infotypeu2019s infotype characteristics screen and use as the reference to fill yours)
    22) Save your entries.
    23) Now the Infotype is created and ready to use.
    24) If you want to change the layout of the Infotype as per your requirementu2026
    25) In the PM01 initial screenu2026Select u2018Screenu2019 radio button and give 2000 as the screen name, then click on edit.
    26) In the next screen.. Select u2018Layout Editoru2019 and click u2018Changeu2019.
    27) Screen default layout appearsu2026here you can design/modify the screen..change the attributes of the fields..etc.
    28) Save and activate. (Donu2019t forget to u2018Activate at every level
    i think u have to select CI_INCLUDE while enhanceing the Standrad Infotype
    The above details are from the following link
    Re: How to add fields in custom infotype and update its screens

  • Adding Form fields from Custom backend service in SAP_PA

    Hi All,
    I have defined a rule in the form scenario using a form field in my custom backend service. I want this rule to be used in the operation of the SAP_PA backend service.
    In order to use the rule in SAP_PA, the field from the custom backend service(used in the rule definition) has to be assigned to SAP_PA as well. Unfortunately I am not able to assign it.
    I have seen SAP delivered from scenarios (S_HR_PA_US_CHG_PERM_ADDR) where they have assigned fields from custom backend service to SAP_PA, Can you please guide me how to acheive this ??
    Thanks,
    Bharath

    Try directly adding the field in the form scenario in the SAP_PA service.
    Thanks,
    Aravind

  • Description for value help field for custom infotype field

    Hi,
       I`ve got to include a field in custom infotype. This field has got a value help attached to it. The values to be displayed in the value help are stored in the domain of the field(in the dictionary).
    The requirement is that once I select a value from the F4 help, the description for that value should be fetched and be dispalyed on the screen.
      I`m using the FM "<b>AM_READ_TEXT_ON_DOMAIN_VALUE</b>" to read the description from the domain ,but unable to make it display it on the screen.
      Can anyone suggest me as what should I do for displaying the description in the custom infotype screen.
    Regards,
    Farhana

    Hi anji,
       While using the "GET_DOMAIN_VALUES", I do get all the values from the domain. But I want only description to be displayed when I select a Value for that field.Kindly help out..
    Eg:
    1-Individual
    2-Family
    Then the description should be displayed as Family when I select the value 2 from the value help.
    Regards,
    Farhana.

  • Update Z table from Custom pop up screen

    Hi All,
    I need to enhance  CC01 transaction.
    CC01 is used to create Change Numbers.
    My requirement is when Profile(Input field in CC01) is entered into initial screen of CC01 and enter key is hit, a custom pop up screen should be raised. This pop up screen will have 10 input fields from Z table. So when the user enters values in the input fields of pop up screen, I need to capture these values. When processing of CC01 is complete and saved system generates a Change Number, then I need to update the Z table with the values from custom pop up screen to the corresponding Change Number (Generated after Save)in Z table
    I have found the customer enhancement for raising Pop up screen pccd0005 (EXIT_SAPMC29C_006).
    My problem is how to link the pop up screen values with the Change number and update the Z table.
    Change Number is generated after CC01 Save.
    Can any one help me how to achieve this functionality?
    Thanks in advance
    Bhasker

    <u>Syntax:</u>
    EXPORT param_1 TO MEMORY ID 'EXIT_PCCD'.
    IMPORT param_1 FROM MEMORY ID 'EXIT_PCCD'.
    FREE MEMORY ID 'EXIT_PCCD'.
    Please look into the F1-help on Export/Import statements for more details.
    Message was edited by: Sam

  • Adding fields to custom idoc type

    Hi,
    i have a query regarding adding fields to custom idoc type.
    To add fields to custom idoc type we are trying to cancel the release from we30, but we are facing error that 'The release of basis type cannot be reset'
    When we are trying to cancel release from we31we are facing error 'Error while ressting release of segment z type'.
    Kindly suggest the solution to add fields in basic idoc type.
    Thanks & regards,
    Farheen.

    Reason that you are getting these errors is that you cannot cancel
    the release of an extension made in previous version . Instead you have to create a new extension.
    1.It is not possible to change a segment definition which is released in a
    lower release.
    2.You must create a new segment definition for the new release e.g. 620 with a new segment
    field with the appropriate length.
    In transaction WE20, outbound parameters, you can specify
    the "segment release in IDoc type" for the communication.
    Please read the F1 help of this field for further information.
    3.For your own segments you can define a new version of the segment
    tcode  WE31 -> Add Version
    Thanks!

  • Moving field from Customer tab to Deatils Tab

    Hi,
    We have requirement to move the field added using EEWB to details Tab in Lead transaction.Using EEWB I have included field in lead transaction.EEWB gegeration was successful and I am bale to see the field under Customer Fields Tab, however according to my business case we need the field under Details TAB.
    Is there any way we can move field from Customer Fields to Details tab.
    Thanks,
    Ajay

    Hi
    i am working on SDB, where we need to create faqs,using text search in TREX,
    i am able to upload problem and solutions , but how can i change default attributes,
    when i try to configure in SPRO, in problem type , problem subtype, it is showing error  " entry in TOKBC doesn't exist "
    who will do that , is this table update is by abaper or CRM guy ,
    i mean it is asking delault number in ABAP table.
    is it necessary to config the fields,
    bcause, without this fields also , search is showing perfect serch results,
    thanks
    kiran budde

  • Text from customer master to delivery header

    Hi Experts,
    Here we have a requirement, Text what we maintain in the customer master (like Shipping point address) text need to be trigger at Delivery header,
    1) Is it possible in standard text determinaction or we need to go for any user exits?
    2) If we want to use user exits what are the user exits we have to copy the data from customer master to delivery header.
    NOTE: Client doesnt want to use the text from sales order or scheduling agrements.
    Please help me to fill the requirement .
    best regards,
    chiranjeevi

    Hi Chiranjeevi,
    It is possible to achieve this with standard text determination procedure itself.
    Goto transaction VOTXN and in the "Delivery --> Header" create a new access sequence with the Customer Master Text IDs (like the ID which contains the Shipping Point address) from which the text is to be selected. Once done, create or make use of an existing text determination procedure available under Delivery Header and then assign the access sequence to the Delivery Header Text ID into which the Customer Master text is to be copied. Maintain additional settings as necessary. This will ensure that the text from customer master is directly copied over to the delivery header.
    There are many documents already available (search in Google) to explain the text determination process if you need help with the same.
    Regards,
    Som

  • How to use macro to pull data from custom infotype?

    Hi all,
    Is rp_provide_from_last p9004 space pn-begda pn-endda. works?
    i am getting all zeros .
    is using macros possible pull data from custom infotype? or only select?
    Regards
    sas
    For LDB PNPCE
    get peras:

    Hi,
    Try the following Macro it will solve out your problem,
    DEFINE rp_provide_from_last.
      rp_found = '0'.
      clear: rp_tabix.
      loop at &1.
        if &2 ne space.
          check &1-subty eq &2.
        endif.
        if &1-begda le &4 and &1-endda ge &4.
          rp_found = '1'.
          exit.
        endif.
        if &1-begda le &4 and &1-endda ge &3.
          rp_tabix = sy-tabix.
        endif.
      endloop.
      if rp_found eq '0'.
        if rp_tabix ne 0 .
          rp_found = '1'.
          read table &1 index rp_tabix.
        else.
          clear: &1.
        endif.
      endif.
    END-OF-DEFINITION.
    rp_provide_from_last <p????> space <begda> <endda>.
    Best Regards,
    Faisal

  • To trigger ADOBE form from Custom Infotype

    hello,
    I hae create d ADOBE form and want to trigger it on "Save" record from Custom Infotype....
    I need this form to be displied as User my do some changes and save it again...
    I have used following code to trigger this from module pool...
    Data : lv_fm_name type rs38l_fnam.
    Data : gs_sfpoutputparams type SFPOUTPUTPARAMS,
           gs_sfpdocparams TYPE sfpdocparams,
           gs_formoutput TYPE fpformoutput.
    Set output parameters and open spool job
      gs_sfpoutputparams-nodialog = 'X'. " suppress printer dialog popup
      gs_sfpoutputparams-GETPDF = 'X'. " launch print preview
      call function 'FP_JOB_OPEN'
        CHANGING
          ie_outputparams = gs_sfpoutputparams
        EXCEPTIONS
          cancel          = 1
          usage_error     = 2
          system_error    = 3
          internal_error  = 4
          others          = 5.
    First get name of the generated function module
      call function 'FP_FUNCTION_MODULE_NAME'
        EXPORTING
          i_name     = 'Z_ISR_FORM_Z017'
        IMPORTING
          e_funcname = lv_fm_name.
       EXCEPTION
       CX_FP_API_REPOSITORY = 1
       CX_FP_API_USAGE      = 2
       CX_FP_API_INTERNAL   = 3.
    Set form language and country (->form locale)
      gs_sfpdocparams-langu = 'E'.
    gs_sfpdocparams-country = SY-LANGU.
      gs_sfpdocparams-FILLABLE = 'X'.
    Now call the generated function module
      call function lv_fm_name
        EXPORTING
          /1bcdwb/docparams  = gs_sfpdocparams
       IMPORTING
         /1BCDWB/FORMOUTPUT = gs_formoutput
        EXCEPTIONS
          usage_error        = 1
          system_error       = 2
          internal_error     = 3
          others             = 4.
    Close spool job
      call function 'FP_JOB_CLOSE'
        EXCEPTIONS
          usage_error    = 1
          system_error   = 2
          internal_error = 3
          others         = 4.
    But still I'm unable to get form on "Save"..
    Please help me.
    Regards,
    Yogesh

    Hi Yogesh,
       Just to test ... can you place your code in a report and call the report with submit ... return in your module pool? For the data tables in the interface, you may export them and import them.. this will ensure that everything is good with your code and the place where you call the code from. I believe the issue is Module Pool rather than anything else. But that's just a doubt and we need to do this to confirm it.
    Best Regards,
    Abd-Al-Aleem

Maybe you are looking for

  • Vendor  payment terms replication

    Hi, Vendor payment terms are not getting replicated to SRM 4.0 from ECC 5.0.We have batch jobs running for vendor replication ( new and update).When i change the payment terms  in ECC , it is  not coming to SRM.I checked in Manage BPs. Thanks for sug

  • Encrypting Message / Payload received from DB Procedure - DBAdapter

    Hi, Im trying to encrypt the message returned from DBAdapter. My scenario is 1) Get User details from thridparty application 2) Pass the details to DB Procedure (Using DBAdapter here) 2) DB procedure creates user and send back its password in plain t

  • Help with menu

    howdy everyone! i'm working on a new edge navbar for a client and i've run into some problems. see this link:  http://salesdigital.com/testmenu/  mouseover products to reveal the drop down. i've got this working pretty good exept my invisible buttons

  • Lead / Cycle time for procurement

    Hi, Is there a T Code which gives me the lead time / cycle time for the complete process from PR-PO-GR. Or I need to develop a report. FS for any Report developped will be appreciated. Regards, Anubhav

  • User role to access configuration management in NWA

    Hi, What USER role is required to create the destination information in configuration management in NWA. When I access NWA, I only have access to SOA management which has only Monitoring tools with role SOA technical ADmin. I need this to convert IDO