Adding field in the selection-screen of a zprogram

hi gurus,
i have to add field in the selection-screen of oppurtunities. in database i have a field salesvalues, some of oppurtunity guids have this field value. first i need to add in selection-screen in this alv report. and fetch the data from ztable into required field . if the input fields of the salesvalues field id filled, then filter the global guids(from global table which had the guid values already) with this guids related to salesvalues. and if one single guid mathes to 2 values of salesvalues then concatenate 2 values with comma and display in single field. if select-options are blank then fetch all opportunity guids which have salesvalues. pls give solution.

Hi Srini,
Thanks for your Reply
I have kept 01 against the field BSEG-AUGDT and selected the preselect check box also.
But still that field is not visible in the dynamic selection screen.
Thanks
Ajay.D

Similar Messages

Adding fields to the selection screen of IW38

We have added some fields to the CI_AUFK include, they have also been added to the RIHAUFK_LIST structure. Currently the new fields appear in the ALV when the report is run.
What I need to do is add them to the selection screen.
Has anyone done this? I have been looking for a user exit etc, no luck.
Thanks, Mike

Why not use the new enhancement framework?
Goto the main program in SE38 and click on the Enhance button - spiral icon (Shift+F4) and try to add new selections at the appropriate by implementing the appropriate enhancement.
I am sure you can achieve it using enhancement spots.
cheers,
Aabhas

Functional area(FKBER( field in the selection screen))

Hi,
I have a requirement to add functional area field in the selection screen for a report painter report. This report using library 1VK and table 'CCSS'. I added functional area field in the general data selection . After the execution of report with functional area field filled with value. report not giving any output. do i need to maintain any setting to achieve?
Regards,
Palani

Hi,
How you have filled the values?
It is 16 CHAR long.

Functional area(FKBER field in the selection screen of the report painter))

Hi,
I have a requirement to add functional area field in the selection screen for a report painter report. This report using library 1VK and table 'CCSS'. I added functional area field in the general data selection . After the execution of report with functional area field filled with value. report not giving any output. do i need to maintain any setting to achieve?
Regards,
Palani

1. Call GR22 and click "Characteristics".
2. Check FKBER and assign a position number to it.
3. Save and close the library.
4. Call your report in GRR2 and you should now see FKBER as an available characteristic.
5. Use it in the General Data Selection or as a Lead Column, as per requirement.
Or,
1. Call GR21 and create a custom library. Provide a name and description and also provide a library you can copy from (scan for the best-fit library).
2. Now follow the steps 2 through 5 above to achieve your result.
Hope this helps.
Cheers.

How to Add a new fields in the selection screen of LDB.

Hi All,
I want to add a new fields in the selection screen of LDB & then i need to select the data for that fields.
So could you please tell me for that where i need to add the code for selecting the data.
Thanks
Roli

Hi
welcome to SDN forum
If you are designing your own LDB with your own tables you can define tree structure and then the selection screen for the tables
if you wants to modify the std LDB of SAp means take the access key and to modify that code
if you add the extra field you have to modify the where conditions in the code also
see the doc
A logical database is a special ABAP/4 program which combines the contents of certain database tables. You can link a logical database to an ABAP/4 report program as an attribute. The logical database then supplies the report program with a set of hierarchically structured table lines which can be taken from different database tables.
LDB offers an easy-to-use selection screens. You can modify the pre-generated selection screen to your needs. It offers check functions to check whether user input is complete, correct, and plausible. It offers reasonable data selections. It contains central authorization checks for data base accesses. Enhancements such as improved performance immediately apply to all report programs that use the logical database.
Less coding s required to retrieve data compared to normal internel tables.
Tables used LDB are in hierarchial structure.
Mainly we used LDBs in HR Abap Programming.
Where all tables are highly inter related so LDBs can optimize the performance there.
Check this Document. All abt LDB's
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.highlightedcontent?documenturi=%2flibrary%2fabap%2fabap-code-samples%2fldb+browser.doc
GO THROUGH LINKS -
http://www.sap-basis-abap.com/saptab.htm
http://help.sap.com/saphelp_nw04/helpdata/en/9f/db9bfa35c111d1829f0000e829fbfe/content.htm
http://help.sap.com/saphelp_nw04/helpdata/en/9f/db9b5e35c111d1829f0000e829fbfe/frameset.htm
http://help.sap.com/saphelp_nw04/helpdata/en/c6/8a15381b80436ce10000009b38f8cf/frameset.htm
/people/srivijaya.gutala/blog/2007/03/05/why-not-logical-databases
Re: **LDB**
www.sapbrain.com/FAQs/TECHNICAL/SAP_ABAP_Logical_Database_FAQ.html
www.sap-img.com/abap/abap-interview-question.htm
www.sap-img.com/abap/quick-note-on-design-of-secondary-database-indexes-and-logical-databases.htm
http://help.sap.com/saphelp_nw04/helpdata/en/9f/db9b5e35c111d1829f0000e829fbfe/content.htm
http://help.sap.com/saphelp_nw2004s/helpdata/en/9f/db9bb935c111d1829f0000e829fbfe/content.htm
Gothru the blog which provides info on LDB's:
/people/srivijaya.gutala/blog/2007/03/05/why-not-logical-databases
Sample code
TABLES: SPFLI,
SFLIGHT,
SBOOK,
SCARR.
START-OF-SELECTION.
GET SPFLI.
WRITE:/ SPFLI: , SPFLI-CARRID, SPFLI-CONNID,
SPFLI-AIRPFROM, SPFLI-AIRPTO.
GET SFLIGHT.
WRITE:/ SFLIGHT: , SFLIGHT-CARRID, SFLIGHT-CONNID, SFLIGHT-FLDATE.
GET SBOOK.
WRITE:/ SBOOK: , SBOOK-CARRID, SBOOK-CONNID,
SBOOK-FLDATE, SBOOK-BOOKID.
GET SFLIGHT LATE.
WRITE:/ GET SFLIGHT LATE: , SFLIGHT-FLDATE.
Regards
anji

I have mapped the fields on the selection-screen to the BDC on transaction

I have mapped the fields on the selection-screen to the BDC on transaction F110.
When I am selecting a particular any value in select-option on the selection screen, it is giving some default value and the value given by me,for example:
Payment methods:C
but in BDC recording for F110 Payment methods:IEQC when the programs is running in foreground mode.
how can I rectify it?

This is because payment methods may be a table and what you see IEQC is actually, I for include, EQ for equal and C as your payment method. This is standard structure for ranges or select-options. You can use variable-low which will give you only C.

Maintaing a default value for a particular field in the selection screen

Hi all,
How to maintain a default value for a particular field in the Selection Screen of a Standard report
Regards
Ajay

>
ajay babu wrote:
> Hi all,
>
> How to maintain a default value for a particular field in the Selection Screen of a Standard report
>
> Regards
> Ajay
Create a variant for your standard program and assign this variant to the field 'Start with variant' while creating transaction code for the standard program in the transaction 'SE93'.
Regards
Rajesh.

Field in the selection screen as a select option with two default values

Hi All,
can anybody tell me how to put field in the selection screen with two defaul values.
for ex: selection screen the Account Group KNA1-KTOKD as a select option. The defeault value should be Y001 and Y005.
please reply ASAP. Its urgent.
Thanks in advance,
Madhu

Hi Madhu,
Since Select options are nothing but ranges, you can use the following code to add two distinct values to the select options by default.
s_ktokd-sign = 'I'.
s_ktokd-option = 'EQ'.
s_ktokd-low = 'Y001'.
append s_ktokd.
s_ktokd-low = 'Y005'.
append s_ktokd.
clear s_ktokd.
However, if you want to mention a range like all the values between these given two values to be considered then u may use,
select-options : s_ktokd for KNA1-KTOKD default 'Y001' to 'Y005'.
or
s_ktokd-sign = 'I'.
s_ktokd-option = 'BT'.
s_ktokd-low = 'Y001'.
s_ktokd-high = 'Y005'.
append s_ktokd.
Reward if helpful.

Field in the Selection Screen.

Hello Experts,
I need some info to list all the reports which uses a field in the selection screen.
For example the field SAKNR (G/L Account). If this field used in the 10 reports selection screen, then I need to display all the 10 reports.
Is it possible to get the fields used in the Sel. screen of a report.
Please give some suggestion.
Regards,
Vasanth

Hello Narendra,
Thanks for the reply.
See In a program I declared the field like this:
PARAMETERS: P_SAKNR LIKE EKKN-SAKTO.
So in this case I have to list this report name.
Hope you understand my requirement.
Thanks !!!
Vasanth

Disabling certain fields on the selection screen.

Hi all,
I want to disable certain fields on selection screen of my program, also i want to display certain fields on selection screen only if a particular field on the selection screen is checked or selected. Please guide me how this can be achieved via coding in a program.
Thanks & regards,
Chetan.

Hi Chetan,
try this.
SELECTION-SCREEN BEGIN OF BLOCK b1 WITH FRAME TITLE text-001.
PARAMETERS: pa_file TYPE rlgrap-filename MODIF ID abc,
pa_lifnr TYPE lfa1-lifnr MODIF ID abc,
pa_vkorg TYPE vbak-vkorg MODIF ID abc.
SELECTION-SCREEN END OF BLOCK b1.
SELECTION-SCREEN BEGIN OF BLOCK b2 WITH FRAME TITLE text-002.
PARAMETERS: pa_kunnr TYPE vbak-kunnr MODIF ID def.
SELECT-OPTIONS: s_lifnr FOR gs_lfa1-lifnr MODIF ID def,
s_date FOR gs_lfa1-erdat MODIF ID def,
s_augru FOR gs_vbak-augru MODIF ID def,
s_vbeln FOR gs_vbak-vbeln MODIF ID def.
SELECTION-SCREEN END OF BLOCK b2.
SELECTION-SCREEN BEGIN OF BLOCK b3 WITH FRAME TITLE text-003.
SELECTION-SCREEN BEGIN OF LINE.
PARAMETERS: pa_upd RADIOBUTTON GROUP g1 USER-COMMAND uc01 DEFAULT 'X'."#EC *
SELECTION-SCREEN COMMENT 3(60) text-004 FOR FIELD pa_upd.
SELECTION-SCREEN END OF LINE.
SELECTION-SCREEN BEGIN OF LINE.
PARAMETERS: pa_rep RADIOBUTTON GROUP g1 ."#EC *
SELECTION-SCREEN COMMENT 3(60) text-005 FOR FIELD pa_rep.
SELECTION-SCREEN END OF LINE.
SELECTION-SCREEN END OF BLOCK b3.
IF pa_rep EQ gc_x.
LOOP AT SCREEN.
IF screen-group1 = gc_abc.
screen-input = gc_zero_num.
ELSEIF screen-group1 = gc_def.
screen-active = gc_one_num.
ENDIF.
MODIFY SCREEN.
ENDLOOP.
ELSEIF pa_upd EQ gc_x.
*For Reprocessing
LOOP AT SCREEN.
IF screen-group1 = gc_def.
screen-input = gc_zero_num.
ELSEIF screen-group1 = gc_abc.
screen-active = gc_one_num.
ENDIF.
MODIFY SCREEN.
CLEAR pa_upd.
ENDLOOP.
ENDIF.
REPORT zrich_001.
PARAMETERS: p_rad1 RADIOBUTTON GROUP grp1 DEFAULT 'X'
user-command chk,
p_rad2 RADIOBUTTON GROUP grp1.
SELECT-OPTIONS: s_datum1 FOR sy-datum MODIF ID d1,
s_datum2 FOR sy-datum MODIF ID d2.
AT SELECTION-SCREEN OUTPUT.
LOOP AT SCREEN.
IF p_rad1 = 'X'
AND screen-group1 = 'D2'.
screen-active = '0'.
ENDIF.
IF p_rad2 = 'X'
AND screen-group1 = 'D1'.
screen-active = '0'.
ENDIF.
MODIFY SCREEN.
ENDLOOP.
reward if useful.
regards,
sravanthi.

Possibele entries are not populating for the fields on the selection screen

Hi,
Possible entries are not populating for the fields on the selection screen for the query.But its working fine in Development and Quality Systems.
Can any body help me out
Regards,
Amit.

Hi,
In the Selection screen,go to Settings->Value Restrictions tab->Read Mode Settings->Custom radio button and select the options Values in Master Data or Only Values in InfoProv or Only Posted values for navigation.
After this setting,check whether you are getting the data or not.
Rgds,
Murali

How to validate a select-option field on the selection- screen

Hi,
   I need to validate a selection-option field in the selection-screen.
Requirement is : i need to read each of customer number one by one and validateCan you please me in achieving this.
Best Regards
Mamatha.B

hi,
chk this sample code.
SELECT-OPTIONS : s_kunnr for kna1-kunnr.
AT SELECTION-SCREEN.
     if 'S_KUNNR-HIGH' = "condition
    "put your required validation here
     endif.
rgds
Anver
Message was edited by:
        Anversha s

Clearing only a few fields in the selection-screen

Hi Folks,
I am having the following fields in the selection screen.
werks.
matnr
quantity
filename like rlgrap-file.
First time the user enters some values and executes it and comes back to the selection-screen.At this point I want <b>only matnr and quantity</b> fields in the selection-screen to be cleared.
If I use FREE MEMORY it is clearing all the fields.I want only the above mentioned fields.I don't want to set the data in the in werks as default in the program.Kindly let me know how to achieve this.
Thanks,
K.Kiran.

Hi Kiran,
You can write your code in AT-SELECTION SCREEN OUTPUT.
So when ever selection screen called you will have your variables you want cleared.
USe LOOP AT SCREEN.. there.
Regards,
Atish

Adding a new field to the selection screen of a LDB

Hi all,
I want to add a new field Clearing date(BSEG-AUGDT) in the dynamic selection screen of the report RFUMSV00.
For adding a new field i have copied the SAP view of a Logical database to CUS view.
Next i had added the Clearing date(BSEG-AUGDT) to the function group Document header(01) and selected the check box Preselect and saved the view.
But still i am not able to find the newly added field in the dynamic selection screen of the report.
Please suggest me where i am going wrong or how to do this.
Thanks in advance
Ajay

Hi Srini,
Thanks for your Reply
I have kept 01 against the field BSEG-AUGDT and selected the preselect check box also.
But still that field is not visible in the dynamic selection screen.
Thanks
Ajay.D

SQ01 - Adding a field to the Selection Screen

Hi All,
I need to add a new Selection Criteria in the Selection Screen for an existing SQ01 Query.
Please advise the procedure to do the same.
Regards,
RR

Hi,
You have marked this thread as being answered, however, neither of your questions has been specifically addressed in the answers provided.
You can make any field from any infotype a selection field in SQ01. First, in Settings --> Settings uncheck the Graphical Query Painter. Enter the query and use the yellow arrows to the right to reach the Selection screen. Here, any field in your query can be checked to become a selection field. If the Graphical Query Painter is checked, go to your query. On the left you have your infotypes and fields. Checking the right hand box will make any field in your query a selection field.
For your second question, if you create your query in SQ01 in the "Global Area" it is transportable when saved and you should get a pop-up requesting the transport number. If you save a selection screen for that query with the starting designation "CUS&", it is also transportable when saved the pop-up should also appear.
Paul

Adding field in the selection-screen of a zprogram

Similar Messages

Maybe you are looking for