Adding field to standard screen in tr. FPSEC1

Hi,
I need to add customer field to standard screen in FPSEC1 transaction (screen 202,second screen in transaction (non cash choice)).
Has someone did it already?
(please don't give me general advices as "find screen exit" and so on...)
Point's will be given.
Regards.
Yossi.R.
*sorry for crossposting

How you solved this.
I am facing same problem
Please reply.

Similar Messages

Without EEWB Is it Possible to adding field to standard tab.

Hi Experts!
Without EEWB and enhancing Screen Is it Possible to adding field to standard tab. Any body can help out in this.
URGENT
Thanks
vikram.c

Yes it is possible, but we are talking a modification of SAP standard here. Also the effort needed will be at least 10 times higher than using EEWB as you have to reprogram all generated code / screen helps that SAP provides. Moreover these fields are then still not exchanged with the interfaces / BDocs etc which will be also some more days of work. There is no usable documentation on this - at least not by SAP and I am not aware of another one. It is much easier to create an EEWB enhancement and then move the fields from one tab to another.
Doing this all by hand is like adding a second processor to an existing motherboard for more performance compared to exchanging the existing one with one of higher specifications.This is possible, but requires a) more work/time/material b) more experience c) you lose warranty d) in the end you do not know for sure what the outcome will be
Regards, Kai

Adding Z-Fields to Standard Screens of Transaction VA01 / VA02 / VA03

Hi All,
The system is being upgraded from 4.7 to ECC 6.0
In 4.7 server, the client has added 2 Z-fields to VBAK table. Moreover, these Z-fields are added to Standard SAP Screens of Transactions VA01 / VA02 / VA03.
One of the Z-field is for the Description which appears on the very first screen of transaction (Screen 4440) replaces the Standard SAP Screen Field VBAK-KTEXT.
The other Z-Field appears on Header-->Additional Data B (Screen 8309).
Please note:- The screen numbers that are mentioned above are the screen numbers of ECC 6.0
I tried to change the edit the Screen by taking the Access Key from the market place, but only got Screen Overlapping Errors.
What should I do to incorporate these Z-fields?
I have heard of Screen-exits but never worked on the same. Would appreciate if someone guides me as to what needs to be done.
Thanks for your valuable time and suggestions.
Regards,
Rajesh

Hi Rajesh,
I am working ECC 6.0
We had the same requirement but for Additional Data B in header and item
For this
(1) Got the access key
(2) applied access keys
(3) In the additonal Data B screens/Program SAPMV45A imported Z fields to the screen in Graphical painter,saved and activated after writing necessary PBO/PAI modules and the codes in 8309 and 8310 screens
Please can you tell more on the "Screen Overlapping Errors"
Maybe we can can work out the error.....
Regards
Byju

Adding search help (F4) for a screen field in standard screen of VA02

Dear Gurus,
I need to add a Search Help (F4) to a Standard Screen Field VBAK-VSNMR_V in the standard Screen of VA01/Va02.....Can anyone please guide me how it can be done.
Regards
Sajid
Edited by: shaik sajid on Feb 2, 2009 8:38 AM

Hi shaik,
Refer to the following useful link:
Search help enhancement in VA01
Hope this will help you...

Adding field in pa30 screen urgent

hi all,
i am new to user exits.
and my requirement is to add a field in screen for PA30 tcode screen.
so how i can go for this .
if anyone has added fields in any SAP standard screen
then plz give me the doc regd that with screen shots if u have otherwise give me the steps.
my mail id is- [email protected]
plz i am looking urgently for it.
i will award all ur efforts.
thanks
sanjeev

Screen Exit
Please remove the TDS-related input fields on the PO entry screen on the customer data tab (PO line details).
- TDS account
- TDS cost code
- TDS sub code
1.     Goto Transaction Code Me21n
Fill the following fields
Enter
Give the input values in following fields from ORGDATA TAB
Purchasing org
Purchasing group
Company code
Vendor
Enter
Select Customer Data tab like following
USER EXIT : MM06E005 (Customer fields in purchasing document )
 Goto : T.Code : SMOD
     Give the Enhacement Name : MM06E005
     Click on Display
     Click on Components Push Button
     Double click on function module EXIT_SAPMM06E_016( Export Data to Customer Subscreen for Purchasing document item)
     Double click on Include ZXM06O01.
     Insert the following coding in that include
SET PARAMETER ID 'BUK' FIELD g_ekko-bukrs.
LOOP AT SCREEN.
    IF screen-name = 'EKPO_CI-ISMSUBTITLE1'.
      screen-input = '0'.
      MODIFY SCREEN.
    ENDIF.
*>>>>>>>>>>>>>>>>>>>>>> Begin of insert CR336/BG1 >>>>>>>>>>>>>>>>>>>>>>
    IF screen-name = 'G_EAN11'.
      screen-input = '0'.
      MODIFY SCREEN.
    ENDIF.
*<<<<<<<<<<<<<<<<<<<<<<< End of insert CR336/BG1 <<<<<<<<<<<<<<<<<<<<<<<
*>>>>>>>>>>>>>>>>>> Begin of Changes for K896570/501411945 <<<<<<<<<<<<<
IF screen-name = 'EKPO_CI-TDSACCOUNT'.
      screen-input = '0'.
      MODIFY SCREEN.
    ENDIF.
IF screen-name = 'EKPO_CI-TDSCOST'.
      screen-input = '0'.
      MODIFY SCREEN.
    ENDIF.
IF screen-name = 'EKPO_CI-TDSSUB'.
      screen-input = '0'.
      MODIFY SCREEN.
    ENDIF.
*>>>>>>>>>>>>>>>>>> End of Changes for K896570/501411945 <<<<<<<<<<<<<
*>>>>>>>>>>>>>>>>>>>>>> Begin of insert SM1 >>>>>>>>>>>>>>>>>>>>>>
    IF ( screen-name = 'EKPO_CI-TDSACCOUNT'
      OR screen-name = 'EKPO_CI-TDSCOST'
      OR screen-name = 'EKPO_CI-TDSSUB'
      OR screen-name = 'TDS_TXT_1'
      OR screen-name = 'TDS_TXT_2'
      OR screen-name = 'TDS_TXT_3'
      OR screen-name = 'TDSACCOUNT-DESC'
      OR screen-name = 'TDSCOST-DESC'
      OR screen-name = 'TDSSUB-DESC' ).
      IF g_ekko-bukrs(2) <> 'U6'.       "not a theatrical company
        screen-invisible = '1'.
        screen-input     = '0'.
      ELSEIF g_flag = 0.                "display only
        screen-invisible = '0'.
        screen-input     = '0'.
      ELSEIF g_flag = 1.                "change
        screen-invisible = '0'.
*>>>>>>>>>>>>>>>>>> Begin of Changes for K896570/501411945 <<<<<<<<<<<<<
       screen-input     = '1'.       "Fharook Syed
        screen-input     = '0'.        "Fharook Syed
*>>>>>>>>>>>>>>>>>> End of Changes for K896570/501411945 <<<<<<<<<<<<<
      ENDIF.
      IF screen-name = 'EKPO_CI-TDSACCOUNT'.
        screen-required = '1'.
      ENDIF.
      MODIFY SCREEN.
    ENDIF.
*>>>>>>>>>>>>>>>>>>>>>> End of insert SM1 >>>>>>>>>>>>>>>>>>>>>>
 save & activate.
 Repeat the above process in ME21N to see customer data fileds in CUSTOMER DATA tab
After the above Modifications CUSTOMER DATA is   displaying like this

How to remove fields from Standard Screen

Hi,
I Have faced one problem in screens(se51). When apply one SAP Note i have to change the screen manually(as per Note ) . My requirement is to remove some text fields and label fields. But I cant delete the Fields.
Normally just select the object and Press delete Key to remove one object from screen. But here it is not working.
How can i remove the objects from the screen as per SAP Note.
Thanks in Advance,
WIth Regards,
Neptune.M

Hi,
T.code SHD0 helps you control which fields to appear, suppress and make mandatory in Standard Screen.
refer
https://forums.sdn.sap.com/click.jspa?searchID=4359065&messageID=2961760
Regards

Adding field in standard SAP transaction output results.

Hi,
I have to add a new field in standard SAP transaction output results.
Can any one tell me what are the ways (brief explanation) that I can do this?
If using exists - then what kind of exists I have to use? And how to find out the possibility with user exists?
Thanks for your time.
Thanks.
Chris.

Hi,
There are so many ways to find out the user exits.
Hi,
To see SAP Exits -> Use Tcode SMOD
To See create a project for Customer Exits -> Use Tcode CMOD
There are projects to which Exits are assigned. Selects the relevant projects.
What is User Exit:
http://www.sap-img.com/abap/what-is-user-exits.htm
How to find then:
http://www.sap-img.com/abap/a-short-tutorial-on-user-exits.htm
All Exits List:
http://www.easymarketplace.de/userexit.php
Do a search on SAP Exits, Customer Exits, enhancements, etc
Step 1 :- Execute transaction
step 2 :- Click on Status Menu
step 3 :- Double click on the program (screen) __?????___
Step 4 :- Search source code for the 'Customer-Function' string using the find button. Remember to select 'In main program'.
Step 5 :- A list of search results should be displayed indicating where all function exits can be found.
You can now double click on each of them to go to its position in the source code. This also
allows for the insertion of breakpoints so that you can test if the exits are called in the
appropriate place.
Step 6 :-Once you have found the Function Exit within the source code (Find Function Exit) you need to
access the actual function module it executes. This is done using the following steps:
Step 6.1 :-
Step 1
Locate desired 'Call Customer-function' statement within source code.
Step 2
If code is not within main program (module pool) e.g. SAP* then you will need to find this
out by selecting 'Main Program' from the 'GOTO' menu. The Main program for transaction
Step 3
The actual function module name can now be calculated based on the information retrieved,
it is defined by the following format:
EXIT_<Program name>_<Exit number>
eg :- 'EXIT_SAPLMR1M_004'.
Step 7.1:-
Once you have found the Exit function module
Step 1
Execute transaction CMOD
Step 2
Select 'SAP Enhancements' from the 'Utilities' menu.
Step 3
Select 'All selections' from the 'Edit' menu.
Step 4
Now populate the Component name field with the exit function module and press
the execute button.
Step 5
A list of all Exits(Enhancements) containing that function module should now be displayed.
Step 5
You can now double click on the desired exit to display a detailed description of its uses and a list of all
components contained in it.
Implementing Function Exit
This is required in-order to activate Function exit:
Step 1
The first step is to enter source code into function module in the usual way i.e. via SE37.
There will already be an include declaration within the code with the following
format: Include zx*.
Double click on this to create it, source code can then be entered within here.
Although it is good practice to create another include with this to store your
code, this allows separation of difference enhancements allowing them to be easlity
removed without de-activating the enhancement.
Step 2
Execute transaction CMOD and create new Enhancement. Enter name and press the create
Button.
Step 3
The following screen should be displayed, enter short text then click on the 'Enhancement
Step 4
Now enter the Exit name (enhancement) which contains the desired Function Exit.
Step 5
Return to initial screen of CMOD and press the activate icon. The exit is now ready for use.
Please Mark The Helfull Answers & close the thread.
regards
dj
reward for all useful answers.

Adding Field in standard Table control in crmd_order (standard order)

Hello All,
I want to add a Field in standard table control in Crmd_order - standard order general tab. Please Let me know it is Possible to add, if Possible Let me know how to achieve this Functionality.
Thanks,
Feroz.

hi,
If you don't want to access key...then only option is ,you have to search USER Exit or BADi (Try using BADI ME_GUI_PO_CUST) for me22n transaction......to adding the field.
Regards
Gaurav

How to add field to standard screen of PNP

hello masters, tell me one thing:
- it is possible to add a field that isn't part of PNP logical database to the standard screen PNP.
Could someone help me?
regards and thanks in advance
Mário

Hi Mario,
I don't know anything about SAP HCM, but: If you work with SE80, you can see the logical database in the object tree. Right-mouse-click to copy the logical database to custom name. Modify as you need. Use.
Regards,
Clemens
P.S.: Before I tried I was always afraid of logical databases.Copying is a lot easier than expected.

Add Custom field to standard screen with table control

Hello,
I need to add two custom fields to a standard screen in CAT2 transaction(not using any screen exit).I will be given SSCR key.The standard screen (screen no. 2100) only has a table control.
How can I add the custom field such that it appears as a field on the screen when CAT2 transaction is opened.
Do i need to write any code?
I'm new to ABAP so could you please give a detailed explanation.
Also, do i need to change the 'fixed columns' field in the table control?
Regards,
Monica.

hi,
1) find the screen
2) add new fields to the screen
3) program PBO and PAI
regards,
Wojciech

Adding field in MIRO screen

Hi ,
There is a requirement to add a new field in MIRO screen.
I mean that a new field needs to be made visible.
Please let me know of how to proceed with it in SPRO.
Thanks

Hi,
maybe this can help you:
https://wiki.sdn.sap.com/wiki/display/Snippets/Displaycustomerfieldsinheaderoflogisticsinvoiceverification+transactions
Best regards.

Adding field dynamically on screen.

Hi All,
I have to add fields dynamically on screen based on the no. of data records.
Is there any way to add field dynamically.
I need field like this:
first a check box       second not editable field third editable field.
Table control is another way to solve the problem but only constraint about check box.
Please help me find out any solution.
Thanks in advance.
Piyush Mathur

write your code as :
AT SELECTION-SCREEN OUTPUT.
for making data set 2# inactive
IF rdt1 = c_x.
    LOOP AT SCREEN.
      IF screen-name EQ 'S_BELNR-LOW' OR
         screen-name EQ 'S_BELNR-HIGH' OR
         screen-name EQ 'P_GJAHR'.
        screen-input ='0'.
      ENDIF.
      MODIFY SCREEN.
    ENDLOOP.
ENDIF.
for making data set 1# inactive
IF rdt2 = c_x.
    LOOP AT SCREEN.
      IF screen-name EQ 'S_BUDAT-LOW'
         OR screen-name EQ 'S_BUDAT-HIGH'
         OR screen-name EQ 'S_KUNNR-LOW'
         OR screen-name EQ 'S_KUNNR-HIGH'
         OR screen-name EQ 'RDS1'
         OR screen-name EQ 'RDS2'.
        screen-input ='0'.
      ENDIF.
      MODIFY SCREEN.
    ENDLOOP.
ENDIF.
END-OF-SELECTION.

Adding field to IE05 screen

Hello All,
Is it possible to add a field for IE05 screen?
I want to add some fields like class, characteristic etc.
Is there a screen exit or bapi for this?
Thanks.

Hi,
I am asked to indicate a package for this enhancement spot and it must be a SAP package.
How can i find the correct package?
Thanks.

Adding fields on selection screen dynamically

Hi all,
Can we add some fields to selection screen dynamically on pushbutton click?
Regards,
Dnyanesh

just have look below code
REPORT zrsdvsr1
       LINE-SIZE 220
       LINE-COUNT 65(5).
TYPE-POOLS : slis.
TABLES
TABLES: vbak.
DATA DECLARATIONS
Ranges
RANGES: r_posnr FOR vbap-posnr.
DATA: BEGIN OF t_veramt OCCURS 0,
        vbeln TYPE vbap-vbeln,
        posnr TYPE vbap-posnr,
        matnr TYPE vbap-matnr,
        netwr TYPE vbap-netwr,
        mwsbp TYPE vbap-mwsbp,
      END OF t_veramt.
DATA: BEGIN OF t_disamt OCCURS 0,
        vbeln TYPE vbap-vbeln,
        posnr TYPE vbap-posnr,
        matnr TYPE vbap-matnr,
        netwr TYPE vbap-netwr,
        mwsbp TYPE vbap-mwsbp,
        netwr_v TYPE vbap-netwr,
        mwsbp_v TYPE vbap-mwsbp,
        disc_val TYPE vbap-mwsbp,
      END OF t_disamt.
*&   ALV FIELDS
DATA : alv_fcat TYPE slis_t_fieldcat_alv WITH HEADER LINE,
       alv_layout TYPE slis_layout_alv.
SELECTION SCREEN
SELECTION-SCREEN BEGIN OF BLOCK b1 WITH FRAME TITLE text-001.
PARAMETERS: p_ver RADIOBUTTON GROUP g1 USER-COMMAND rad DEFAULT 'X',
             p_sab RADIOBUTTON GROUP g1 .
SELECTION-SCREEN END OF BLOCK b1.
SELECTION-SCREEN BEGIN OF BLOCK b2 WITH FRAME TITLE text-002.
SELECT-OPTIONS: s_vbeln FOR vbak-vbeln NO INTERVALS MODIF ID gr1.
PARAMETERS:    p_dwfile TYPE rlgrap-filename
               DEFAULT 'C:\test1.txt' MODIF ID gr2,         "#EC NOTEXT
               p_upfile TYPE rlgrap-filename
               DEFAULT 'C:\test.txt' MODIF ID gr3.          "#EC NOTEXT
SELECTION-SCREEN END OF BLOCK b2.
AT SELECTION-SCREEN ON VALUE-REQUEST FOR p_upfile.
**************F4 Help For Input File Name****************************
CALL FUNCTION 'F4_FILENAME'
       EXPORTING
            program_name = syst-cprog
            dynpro_number = syst-dynnr
            field_name    = 'C:\'
       IMPORTING
            file_name     = p_upfile.
AT SELECTION-SCREEN ON VALUE-REQUEST FOR p_dwfile.
**************F4 Help For Input File Name****************************
CALL FUNCTION 'F4_FILENAME'
       EXPORTING
            program_name = syst-cprog
            dynpro_number = syst-dynnr
            field_name    = 'C:\'
       IMPORTING
            file_name     = p_dwfile.
AT SELECTION-SCREEN OUTPUT.
LOOP AT SCREEN.
    IF p_sab = 'X'.
      IF screen-group1 = 'GR1' OR screen-group1 = 'GR2'.
        screen-active = '0'.
        screen-invisible = '1'.
      ELSE.
        screen-active = '1'.
        screen-invisible = '0'.
      ENDIF.
      MODIFY SCREEN.
    ELSE.
      IF screen-group1 = 'GR3'.
        screen-active = '0'.
        screen-invisible = '1'.
      ELSE.
        screen-active = '1'.
        screen-invisible = '0'.
      ENDIF.
      MODIFY SCREEN.
    ENDIF.
ENDLOOP.
START-OF-SELECTION
START-OF-SELECTION.
Check Radio Button
IF p_ver = 'X'.
    PERFORM get_details_open_so_vertex.
ELSE.
    PERFORM get_details_open_so.
ENDIF.
Display the output.
PERFORM diplay_report .
regards
vinod

Changes in currency field in standard screen

hi.
i have to change, number of decimal places for currency field in standard transactions.
i.e 2 decimals to 4 decimals.
please! how to do it.
Regards.
Sreenu.

Check the Tcode OY04.
these values are maintained in TCURX.

Adding field to standard screen in tr. FPSEC1

Similar Messages

Maybe you are looking for