Adding Fields in the MB51 Report.

Is it possible to include the customised field captured in MIGO in customised table in MB51 report. And if I want to include such customised field in the output screen of MB51, what i need to do. Please suggest.
Also is it possible to include such customised filed in the selection screen of MB51.

Hi Mathew,
Report RM07DOCS could show all fields of the MM documents. That means the required fields should be EITHER in database table MKPF MM document header OR MSEG MM document item.
Please have a look at the note 357187. There you will find a description how to activate further data fields to be processed in transactions MB51.
In the case these fields are components of an other table the SAP standard has no possibility to process these fields in MB51 after changing the corresponding customizing settings.
Regards
Mauro
Edited by: Mauro Bianchi on Mar 3, 2011 4:02 PM

Similar Messages

Adding fields to the standard Report

hi ,
could u plz tell me what r the guidelines we have to follow
while adding fields to the standard Report. (Ver ECC 6.0)
in QA32 Tcode, after executing it will generate a report there i hv to add it.
I could find structure of that main final table, i hv appended desired field also,
Now im looking into Enhancement spot for it, is there any method to do it.
Plz hv eye on it.
Regards
Vivek

Hi ,
this is the exact answer for your question.
Go to the inclide RQALVF14 in this there is a perform call_listviewer_f14, in this the output is displaying using REUSE_ALV_GRID_DISPLAY function module . before this do like this ..
modify the output table p_object_tab like this .
the output table is of structure QALS_D02 you can extend this by appending a structure with the custom fields and there is an enhancement ( i have checked it) in this routine call_listviewer_f14 in RQALVF14. Create an enhancement in this routine at the start of the routine and modify the output table using your custom code in it , then you wil get the data as well as fields into fieldcatalog,.
Regards,
Venkat Appikonda.

Adding field in the standard report

Hi ,
i have added the one field in the standard transaction VL06 , in the outboud deliveries report according to the Note 605460. I have to add the field in LIPOV structure.
after adding that field(include structure), in output i am not getting that added field.
please help me .
regards,
ajay reddy

>
Ajay reddy wrote:
> hI,
>
> i got the one more note to display added field in the report . (Note : 128154)
>
> thanks for your tme
>
> regards,
> Ajay reddy
Hi Ajay,
I have the same problem. I have added the field in the field catalog and the field in the final internal table also.
But sometimes its displayed and sometime not.
Looking forward for some help here.
Varun

Reg: Adding field in the msci report

Dear All,
               In our business process, we are using msci report with user defined say example S966, our requirement is to add the new field in the existing report,
              I have found that field in mc18
             Incorporated that field in key figures in mc22,
           But it is not showing in the report,
Please tell me what else to do to get that field updated in the report.
Regards,
ram

Hi all,
          Any contributions plz........
regards,
ram

While adding some fields to the exixting report

I am getting the following error while try to add some fields to the existing report.
Invaid page size.

Hi,
enable confine mode and expand the frames and then add fields .
--Basava.S

To show a special field on the ME2K report

Hi everyone,
The question is about adding a field in the ME2K report. In the layout is needed the PO status, that is wether the PO is still open/completed or not. I was taught dynamic selection can be used to filter by the 'Delivery Completed' criteria, however the info does not appear on the report when doing this way. Is there a way, excl. programming a new transaction, to have the 'Delivery Completed' field appearing on the report? Are special fields available for ME2K?
Many thanks and regards,
SB

to close

View Customer number field in the FBL3N report

Hi All,
Is it possible to view the Customer Number Field in the FBL3N report??
Please revert asap.
Rgds,
Kunal Vichare
Moderator: Please, search SDN

Hello
Please find the process for adding additional field in FBL3N
SPRO->FA->GLA->GL->Line Item->Display line item with ALV->Define Special Fields for finding and sort data
Added the additional field for Customer account number.
Table Field name Field lable
BSEG KUNNR Customer
Thanks
Kameshwar Rao

Addition of new fields in the standard report QM15

Dear Experts,
i need to add new fields to the standard report t.code QM15 which display the list of items: selection of notifications.
the fields i want to add are:
1. batch no
2. Sample no
3. Main vendor
4. text for CDR
plz let me know how can i do this. if any one can help me with screenshoot doc. this is really helpfull.
Thanks
Sachin
Moderator message: "spec dumping", please work yourself first on your requirement.
Edited by: Thomas Zloch on Sep 28, 2011 9:45 AM

Hi,
Have you added the selection text for the field ? also check the activation status.
Regards
Bikas

Add fields to the standard report QM15

i want to add fields to the standard report.
t.code QM15 which display the list of items: selection of notifications.
the fields i want to add are:
1. batch no
2. Sample no
3. Main vendor
please let me know how can i do this. if any one can help me with screenshot doc. this is really helpful.
Thanks

Hi experts,
I have done with the z** creation of the standard report. I also create the z*include for the standard includes which are in the standard program. But I not able to find the fieldcatlog or include where I can add my new fields.
But I tried with one structure tht is standard structure in tht standard report so i make it as z*structure and I append my new fields to this structure. I debug the report and this works fine and also shows output, but at output when I change the layout to see these new fields it shows dump.
Then I tried with one more thing to give the positioning to my new added fields. (This is what u can say column positioning ).
When I execute this,it goes to dump screen.
Now I don't what to do with this.
If any one like to see the code. Plz let me know I will post the code.
Or if any one have any document on this plz share. Or any other solution.
Thanks in advance.
Thanks
Sachin

To edit the field in the ALV report

Hi,
    i want to edit the field of the ALV report what i need to do for that..
Thanks & Regards
Ashu Singh

hi,
check the code,
REPORT zalv_fcat.* Output table T006 structure declarationTYPES : BEGIN OF ty_t006.
        INCLUDE STRUCTURE t006.
TYPES : END OF ty_t006.*Internal table and wa declaration for T006
DATA : it_t006 TYPE STANDARD TABLE OF ty_t006,
       wa_t006 TYPE ty_t006.*declarations for ALV
DATA: ok_code               TYPE sy-ucomm,
fieldcatalog for T006
      it_fielcat           TYPE lvc_t_fcat,
fieldcatalog for fieldcatalog itself:
      it_fielcatalogue           TYPE lvc_t_fcat,
      it_layout           TYPE lvc_s_layo.*declaration for toolbar function
DATA:   it_excl_func        TYPE ui_functions.
Controls to display it_t006 and corresponding fieldcatalog
DATA: cont_dock TYPE REF TO cl_gui_docking_container,
      cont_alvgd     TYPE REF TO cl_gui_alv_grid.*controls to display the fieldcatalog as editable alv grid and container
DATA: cont_cust TYPE REF TO cl_gui_custom_container,
      cont_editalvgd     TYPE REF TO cl_gui_alv_grid.*intialization event
INITIALIZATION.*start of selection event
START-OF-SELECTION.
LOCAL CLASS Definition for data changed in fieldcatalog ALV
CLASS lcl_event_receiver DEFINITION.
PUBLIC SECTION.
    METHODS handle_data_changed
      FOR EVENT data_changed OF cl_gui_alv_grid
      IMPORTING er_data_changed.
ENDCLASS.                    "lcl_event_receiver DEFINITION
LOCAL CLASS implementation for data changed in fieldcatalog ALV
CLASS lcl_event_receiver IMPLEMENTATION.
METHOD handle_data_changed.
ENDMETHOD.                    "handle_data_changed
ENDCLASS.                    "lcl_event_receiver IMPLEMENTATION*data declaration for event receiver
DATA: event_receiver TYPE REF TO lcl_event_receiver.*end of selection event
END-OF-SELECTION.*setting the screen for alv output for table display and
*changed fieldcatalalogue display
SET SCREEN 600.
On this statement double click it takes you to the screen painter SE51. Enter the attributes
*Create a Custom container and name it CCONT and OK code as OK_CODE.
*Save check and Activate the screen painter.
*Now a normal screen with number 600 is created which holds the ALV grid.
PBO of the actual screen , Here we can give a title and customized menus
*Go to SE41 and create status 'STATUS600' and create THE function code 'SUBMIT'
*and 'EXIT' with icons and icon texts
Also create a TitleBar 'TITLE600' and give the relevant title.&----
*&      Module STATUS_0600 OUTPUT
MODULE status_0600 OUTPUT.
SET PF-STATUS 'STATUS600'.
SET TITLEBAR 'TITLE600'.
CREATE ALV GRID CONTROL IF DOES NOT EXISTS INITIALLY
IF cont_dock IS INITIAL.
    PERFORM create_alv.
ENDIF.ENDMODULE.                             " STATUS_0600 OUTPUT* PAI module of the screen created. In case we use an interactive ALV or
*for additional functionalities we can create OK codes and based on the
*user command we can do the coding as shown below
*&      Module USER_COMMAND_0600 INPUT
MODULE user_command_0600 INPUT.
CASE ok_code.
    WHEN 'SUBMIT'.
*TO GET THE CURRENT FIELDCATALOGUE FROM THE FRONTEND
      CALL METHOD cont_alvgd->set_frontend_fieldcatalog
        EXPORTING
          it_fieldcatalog = it_fielcat.
*refresh the alv
      CALL METHOD cont_alvgd->refresh_table_display.
*to Send Buffered Automation Queue to Frontend
      CALL METHOD cl_gui_cfw=>flush.*Exit button clicked to leave the program
    WHEN 'EXIT'.
      LEAVE PROGRAM. ENDCASE.ENDMODULE.                             " USER_COMMAND_0600 INPUT&----
*&      Form CREATE_ALV
&----FORM create_alv.*create a docking container and dock the control at the botton
CREATE OBJECT cont_dock
      EXPORTING
           dynnr = '600'
           extension = 100
           side = cl_gui_docking_container=>dock_at_bottom.*create the alv grid for display the table
CREATE OBJECT cont_alvgd
      EXPORTING
           i_parent = cont_dock.*create custome container for alv
CREATE OBJECT cont_cust
      EXPORTING
           container_name = 'CCONT'.
*create alv editable grid
CREATE OBJECT cont_editalvgd
      EXPORTING
           i_parent = cont_cust.* register events for the editable alv
CREATE OBJECT event_receiver.
SET HANDLER event_receiver->handle_data_changed FOR cont_editalvgd. CALL METHOD cont_editalvgd->register_edit_event
    EXPORTING
      i_event_id = cl_gui_alv_grid=>mc_evt_modified.*building the fieldcatalogue for the initial display
PERFORM build_fieldcat CHANGING it_fielcat it_fielcatalogue.*building the fieldcatalogue after the user has changed it
PERFORM change_fieldcat CHANGING it_fielcatalogue.*fetch data from the table
PERFORM fetch_data.*    Get excluding functions for the alv editable tool bar APPEND cl_gui_alv_grid=>mc_fc_loc_append_row TO it_excl_func.
APPEND cl_gui_alv_grid=>mc_fc_loc_insert_row TO it_excl_func.
APPEND cl_gui_alv_grid=>mc_fc_loc_cut TO it_excl_func.
APPEND cl_gui_alv_grid=>mc_fc_sort TO it_excl_func.
APPEND cl_gui_alv_grid=>mc_fc_sort_asc TO it_excl_func.
APPEND cl_gui_alv_grid=>mc_fc_sort_dsc TO it_excl_func.
APPEND cl_gui_alv_grid=>mc_fc_subtot TO it_excl_func.
APPEND cl_gui_alv_grid=>mc_fc_sum TO it_excl_func.
APPEND cl_gui_alv_grid=>mc_fc_graph TO it_excl_func.
APPEND cl_gui_alv_grid=>mc_fc_info TO it_excl_func.
APPEND cl_gui_alv_grid=>mc_fc_print TO it_excl_func.
APPEND cl_gui_alv_grid=>mc_fc_filter TO it_excl_func.
APPEND cl_gui_alv_grid=>mc_fc_views TO it_excl_func.
APPEND cl_gui_alv_grid=>mc_mb_export TO it_excl_func.
APPEND cl_gui_alv_grid=>mc_mb_sum TO it_excl_func.
APPEND cl_gui_alv_grid=>mc_mb_sum TO it_excl_func.
APPEND cl_gui_alv_grid=>mc_mb_paste TO it_excl_func.
APPEND cl_gui_alv_grid=>mc_fc_find TO it_excl_func.
APPEND cl_gui_alv_grid=>mc_fc_loc_copy TO it_excl_func.
*Alv display for the T006 table at the bottom
CALL METHOD cont_alvgd->set_table_for_first_display
    CHANGING
      it_outtab       = it_t006[]
      it_fieldcatalog = it_fielcat[].
optimize column width of grid displaying fieldcatalog
it_layout-cwidth_opt = 'X'.* Get fieldcatalog of table T006 - alv might have
modified it after passing.
CALL METHOD cont_alvgd->get_frontend_fieldcatalog
    IMPORTING
      et_fieldcatalog = it_fielcat[].to Send Buffered Automation Queue to Frontend CALL METHOD cl_gui_cfw=>flush. Display fieldcatalog of table T006 in editable alv grid
CALL METHOD cont_editalvgd->set_table_for_first_display
    EXPORTING
      is_layout            = it_layout
      it_toolbar_excluding = it_excl_func
    CHANGING
      it_outtab            = it_fielcat[]
      it_fieldcatalog      = it_fielcatalogue[].
ENDFORM.                               " CREATE_alv
*&      Form fetch_data
FORM fetch_data.* select data of T006
SELECT * FROM t006 INTO TABLE it_t006 UP TO 50 ROWS.
ENDFORM.                               " fetch_data
*&      Form BUILD_FIELDCAT
FORM build_fieldcat CHANGING it_fldcat TYPE lvc_t_fcat
                                   it_fcat TYPE lvc_t_fcat.
Fieldcatalog for table T006: it_fldcat
to generate the fields automatically CALL FUNCTION 'LVC_FIELDCATALOG_MERGE'
    EXPORTING
      i_structure_name       = 'T006'
    CHANGING
      ct_fieldcat            = it_fldcat[]
    EXCEPTIONS
      inconsistent_interface = 1
      program_error          = 2
      OTHERS                 = 3.
IF sy-subrc <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
        WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.*----
Fieldcatalog for table LVC_T_FCAT:it_fcat
Generate fieldcatalog of fieldcatalog structure.
This fieldcatalog is used to display fieldcatalog 'it_fldcat'
on the top of the screen. CALL FUNCTION 'LVC_FIELDCATALOG_MERGE'
    EXPORTING
      i_structure_name       = 'LVC_S_FCAT'
    CHANGING
      ct_fieldcat            = it_fcat[]
    EXCEPTIONS
      inconsistent_interface = 1
      program_error          = 2
      OTHERS                 = 3.
IF sy-subrc <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
        WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
ENDFORM.                               " BUILD_FIELDCAT
*&      Form CHANGE_FIELDCAT
*after the user has modified the fieldcatalogue we build another fieldcat
*for the modified alv display
FORM change_fieldcat CHANGING it_fcat TYPE lvc_t_fcat. DATA ls_fcat TYPE lvc_s_fcat. LOOP AT it_fcat INTO ls_fcat.
    ls_fcat-coltext = ls_fcat-fieldname.
    ls_fcat-edit = 'X'.    IF ls_fcat-fieldname = 'COL_POS' OR ls_fcat-fieldname = 'FIELDNAME'.
      ls_fcat-key = 'X'.
    ENDIF.    MODIFY it_fcat FROM ls_fcat.
ENDLOOP.
ENDFORM.                               " CHANGE_FIELDCAT
ref:saptechnical tutorial.
Regards,
Anirban

Hiding the Selected field in the Crystal reports 2011

Hi Experts,
I am new to the Crystal reports. How to hide the Selected Field in the Crystal report 2011.
Thanks,
Kavya.C

Hi Kavya,
You can right click on the field, go to Format Field -> Common Tab. Select/Check the option "Suppress". Or if you want to hide/ Suppress the entire section in a Crystal Report, for e.g. Detail section, right click on Details Section and select Section expert. You can select Hide/Supress accordinly.
That should hide the filed/Section when you run the report.
- Kuldeep

What does the P/C/S fields in the Aggregated report mean?

What does the P/C/S fields in the Aggregated report mean?

'P' stands for Parent (chassis), 'C' stands for Child (card), and 'S" stands for standalone card.
June

WBS element field blank in MB51 report.

Dear Experts,
I m using ECC 6.00 EHP4, My problem is we issue the project material with movement type 221 Q but in MB51 report if I want to get the output with WBS element with Movement type 221 q data is not showing if I give only movment type 221 Q and WBS field blank than in output screen WBS fileld shown blank please clear me where is the problem..
Neeru

Anyone please...
Neeru Dimri

Drop down box for the selection screen field of the classical report

Hi all.
i want to have the drop down list to choose from, for the region(table:zbwcntry-field:zregion1) on the selection screen.
what is to be added to the code for this requirement.Also,please note that this is the classical report.
thanks for this answered.

hi,
data : gv_name TYPE vrm_id,        " used for vrm id
           gv_repid TYPE sy-repid,      " used to hold program name
work area to provide drop down list
DATA : gs_value TYPE vrm_value,
Internal table to provide drop down list
DATA : gt_values TYPE vrm_values,
PARAMETER : p_run(12) TYPE c AS LISTBOX VISIBLE LENGTH 12
                                 DEFAULT 'DEFAULT' OBLIGATORY,
CONSTANTS : gc_run(5) TYPE c VALUE 'P_RUN',    "constant for run mode
gv_name = gc_run.
gs_value-key = gc_v1.
gs_value-text = text-010.
APPEND gs_value TO gt_values.
gs_value-key = gc_v2.
gs_value-text = text-011.
APPEND gs_value TO gt_values.
CALL FUNCTION 'VRM_SET_VALUES'
    EXPORTING
      id              = gv_name
      values          = gt_values
    EXCEPTIONS
      id_illegal_name = 1
      OTHERS          = 2.
IF sy-subrc <> 0.
    MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
            WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
ENDIF.
Hope this is helpful.
Rgds.,
subash

Adding fields to the selection screen of IW38

We have added some fields to the CI_AUFK include, they have also been added to the RIHAUFK_LIST structure. Currently the new fields appear in the ALV when the report is run.
What I need to do is add them to the selection screen.
Has anyone done this? I have been looking for a user exit etc, no luck.
Thanks, Mike

Why not use the new enhancement framework?
Goto the main program in SE38 and click on the Enhance button - spiral icon (Shift+F4) and try to add new selections at the appropriate by implementing the appropriate enhancement.
I am sure you can achieve it using enhancement spots.
cheers,
Aabhas

Adding Fields in the MB51 Report.

Similar Messages

Maybe you are looking for