Adding fields/text on standard SAP transaction screens

Hi,
How do we add the fields on standard SAP transaction screens?
For example, if I have to add field on transaction FB01 screen or change text of existing fields, how does it works?
Please let me know.
Thanks ,
Yogita

hi
every standard sap transaction have enhancement options you can add fields there
try this program to find the field-exits of the standard transaction.
[https://wiki.sdn.sap.com/wiki/display/Snippets/howtogettheuser-exitsofa+transaction]
regards
sarves

Similar Messages

Modificaiton of standard sap transaction screen

Hi All,
I have a requirement to modify standard sap screen for transaction PR05 in travel module. I need to add a few fields to the screen and hide a current field. Can you guide me the best way to do it.
I think of the following ways:-
1. Change the config for the screen (but I guess by this way I cannot add new field, just hide one of the current field)
2. Find user exits ( can I use them to modify screen or can just run them at certain events)
3. changing standard code
thanks for your assistance.
Best regards,
FS

Hello FS,
We can also check the feasibility with screen exits..SAP in the standard code gives us blank screens wherein we can add our fields which can show up at particular locations on the screens.one example is the screen 9999 of the program SAPMP56T which is the program for Travel Expense Manager PR05 transaction....if we go to the screen painter there is a message saying that developer can add thier fields here....we have to find the correct screen exits ourself and it may not always be available for a particular case or a standard transaction..
I believe that in the PR05 there are no proper BADIs or exits that suits the addition of fields to the standard screen....
Changing the standard code should always be considered as a last resort than an option.....
Reward if useful
Regards
Byju

Adding Disclaimer text to standard web dynpro screens in ESS

Hi,
I need to add disclaimer text to the standard web dynpro screens of ESS. The disclaimer text is the same for all screens and there are around 20 different screens where I need to put the same disclaimer text on. Can anybody suggest me the best way to solve this problem.
Thanks,
Tom

HI TOM
u can specify this for each and every workset for ESS.
u used the Additional Inforamation text under each workset.
to change the text do the following
In SAP R3 ecc system go to SPRO->IMG->cross application components->Homepage framework->Areas->define areas->double click on define areas->double click on area key
(work set)
under area description tab
u can found following
Area Description heading --->Additional Information
Area Description (long text)--->
u can change both text accoriding to ur requirement and specify The disclaimer text .
this is done for all workset. one modificaton is finish.
relese the created request.
restart the j2ee server.
regards,
kaushal

Adding field in standard SAP transaction output results.

Hi,
I have to add a new field in standard SAP transaction output results.
Can any one tell me what are the ways (brief explanation) that I can do this?
If using exists - then what kind of exists I have to use? And how to find out the possibility with user exists?
Thanks for your time.
Thanks.
Chris.

Hi,
There are so many ways to find out the user exits.
Hi,
To see SAP Exits -> Use Tcode SMOD
To See create a project for Customer Exits -> Use Tcode CMOD
There are projects to which Exits are assigned. Selects the relevant projects.
What is User Exit:
http://www.sap-img.com/abap/what-is-user-exits.htm
How to find then:
http://www.sap-img.com/abap/a-short-tutorial-on-user-exits.htm
All Exits List:
http://www.easymarketplace.de/userexit.php
Do a search on SAP Exits, Customer Exits, enhancements, etc
Step 1 :- Execute transaction
step 2 :- Click on Status Menu
step 3 :- Double click on the program (screen) __?????___
Step 4 :- Search source code for the 'Customer-Function' string using the find button. Remember to select 'In main program'.
Step 5 :- A list of search results should be displayed indicating where all function exits can be found.
You can now double click on each of them to go to its position in the source code. This also
allows for the insertion of breakpoints so that you can test if the exits are called in the
appropriate place.
Step 6 :-Once you have found the Function Exit within the source code (Find Function Exit) you need to
access the actual function module it executes. This is done using the following steps:
Step 6.1 :-
Step 1
Locate desired 'Call Customer-function' statement within source code.
Step 2
If code is not within main program (module pool) e.g. SAP* then you will need to find this
out by selecting 'Main Program' from the 'GOTO' menu. The Main program for transaction
Step 3
The actual function module name can now be calculated based on the information retrieved,
it is defined by the following format:
EXIT_<Program name>_<Exit number>
eg :- 'EXIT_SAPLMR1M_004'.
Step 7.1:-
Once you have found the Exit function module
Step 1
Execute transaction CMOD
Step 2
Select 'SAP Enhancements' from the 'Utilities' menu.
Step 3
Select 'All selections' from the 'Edit' menu.
Step 4
Now populate the Component name field with the exit function module and press
the execute button.
Step 5
A list of all Exits(Enhancements) containing that function module should now be displayed.
Step 5
You can now double click on the desired exit to display a detailed description of its uses and a list of all
components contained in it.
Implementing Function Exit
This is required in-order to activate Function exit:
Step 1
The first step is to enter source code into function module in the usual way i.e. via SE37.
There will already be an include declaration within the code with the following
format: Include zx*.
Double click on this to create it, source code can then be entered within here.
Although it is good practice to create another include with this to store your
code, this allows separation of difference enhancements allowing them to be easlity
removed without de-activating the enhancement.
Step 2
Execute transaction CMOD and create new Enhancement. Enter name and press the create
Button.
Step 3
The following screen should be displayed, enter short text then click on the 'Enhancement
Step 4
Now enter the Exit name (enhancement) which contains the desired Function Exit.
Step 5
Return to initial screen of CMOD and press the activate icon. The exit is now ready for use.
Please Mark The Helfull Answers & close the thread.
regards
dj
reward for all useful answers.

Changing the text of Text field in standard SAP transaction.

Hi expert,
I have a requirement in which i have to change the text of Text field in standard SAP transaction.
Is it possible? If so, how?
Any pointers will be highly appreciated.

Hi,
I think you want to change the field label of the text field.
For ex in tcode MM01, you can change the field label of Material text field.
The description of the field label comes from the data element it is associated with. To change the text of the field label, you have to change the field label of the data element.
But it will effect all the fields associated with this data element.
To change the field label of the data element go to tcode CMOD. Then click on GOTO->TEXT ELEMENTS->KEYWORDS->CHANGE.
Then enter the data element which is to be changed. In the next screen, change the field label and save it.
Regards,
Vinod

How to pass variable value to field of standard sap transaction.

Hi Experts,
i want to pass the value of variable to field of standard sap transaction. but that field is not having the parameter ID. so please tell me how i pass the value to field.
thanks in advance.

You might like to provide a few more details of which field and transaction you are trying to interact with... typical solutions involve user exits / BAdIs / Enhancements, or transaction variants, or building a BDC to part fill the screens of the Tcode you are calling.
Jonathan

How to populate a field in a standard SAP screen through FMs and Workflows

Hello Everyone,
I have a requirement in which I have to populate a field in an standard SAP Screen.The logic for finding the value of the this field will be done in a new FM and this value has to be passed to this field on the standard SAP screen through workflow.I am new to workflows and need some quick help.Kindly let me know the basic steps I need to follow to realise this requirement.
Thanks,
VP

Hi,
You can create the task in the workflow which contains the method in which you set the value of the field in standard screen using set parameters id and the aprameter name attach to the field

How to Implement a screen exit to a standard SAP transaction

Hi All,
Can any body give How to Implement a screen exit to a standard SAP transaction??
Regards,
AK

Hey,
This link which gives the Step by step way of iimplement a screen exit:
http://wiki.ittoolbox.com/index.php/HOWTO:Implement_a_screen_exit_to_a_standard_SAP_transaction
Regards,
Arjun

How to add button in standard SAP transaction

Hi All,
I would like to know how to add a button in the application toolbar of the standard SAP transaction CO01/CO02. Is there a screen exit for this?
Hope you can help. Thanks
Regards,
April

Check Enhancment CCOWB001. If not then u can search the below list, all of which are called from the T-code.
CCOWB001            Customer exit for modifying menu entries
COIB0001            Customer Exit for As-Built Assignment Tool
COZF0001            Change purchase req. for externally processed operation
COZF0002            Change purchase req. for externally procured component
PPCO0001            Application development: PP orders
PPCO0002            Check exit for setting delete mark / deletion indicator
PPCO0003            Check exit for order changes from sales order
PPCO0004            Sort and processing exit: Mass processing orders
PPCO0005            Storage location/backflushing when order is created
PPCO0006            Enhancement to specify defaults for fields in order header
PPCO0007            Exit when saving production order
PPCO0008            Enhancement in the adding and changing of components
PPCO0009            Enhancement in goods movements for prod. process order
PPCO0010            Enhancement in make-to-order production - Unit of measure
PPCO0012            Production Order: Display/Change Order Header Data
PPCO0013            Change priorities of selection crit. for batch determination
PPCO0015            Additional check for document links from BOMs
PPCO0016            Additional check for document links from master data
PPCO0017            Additional check for online processing of document links
PPCO0018            Check for changes to production order header
PPCO0019            Checks for changes to order operations
PPCO0021            Release Control for Automatic Batch Determination
PPCO0022            Determination of Production Memo
PPCO0023            Checks Changes to Order Components
STATTEXT            Modification exit for formatting status text lines

Is it possible to add PERNR field to MIGO or MB1A transaction screens?

Hi,
Ours is a service industry with @ 10000 employees and we have implemented SAP with MM & HR module. We issue uniforms to all the employees when they join (new Joinee) and again once in January every year as reissuance. We intend to keep size information in employee masters in HR along with station code, designation, department and cost centers.
At present we are using two fields goods recipient and unloading point to mention employee code and type of issue (new joinee or reissuance). This is because employee code (PERNR) field is not there in MIGO_GI screen or MB1A screen.
Is it possible to add PERNR field to any of these transaction screens?
If added then we can fetch the relevant information about issuance of information along with station code, designation, department in Z report.
If possible, then how it can be done?
Thanks in advance,
Satish

Hi ,
as i understand we can add new fields in a transaction through user exit /field exit. so please discuss with your ABAP consultant & try to find out all the exit available for MIGO/ MB1A. then you have to decide which one will suit you. here you have to consider some factors like whether you need to enter values in the field or the field needs to fatch any value from any other table & should populate here.
the ABAPer can then write the code & add your required logic here.
i am not very good in this subject. just tried to share what ever i knew.
regards,
anubhab

Call standard SAP transaction in BSP

Hi guys,
I am working in WAS 6.20.
We have separate server for WAS and records fetched from R/3 server.
Now the requirement is i have to call a standard SAP transaction and the output of the standard transaction should be displayed in the BSP output.
Is it possible to call a SAP standard transaction in WAS 6.20.
Is it possible to display the same output in the BSP screen.
Above to all, displayed output should be refreshed automatically for every 20 minutes.
I come with lot of doubts, expecting your reply.
Hopefully waiting for yours reply.
Saravanan. V

Hi,
Pls check threads like
calling STD SAP transaction in BSP
Calling R/3 Transaction from BSP
Calling standard R/3 transaction from BSP
Calling an SAP transaction from a BSP page
Calling ITS transaction from BSP
Can we call standard transaction from bsp
Eddy
Pimp up the S(D)N site and earn points. Check this <a href="/people/eddy.declercq/blog/2007/02/01/pimp-up-the-jam log</a> for details

What method, BAPI, etc. is used to launch a standard SAP transaction?

Hello friends,
Is there a simple way of finding out what method, BAPI, FM, etc. is used to launch a standard SAP transaction?
I was told that instead of CALL TRANSACTION using BDCDATA stuff, I can use the method or BAPI or FM, or whatever to get the same results. The problem is I don't know how to find out this information.
Apparently using BDCDATA for a CALL TRANSACTION form within an ABAP program can be hazardous because of SAP's upgrades, new releases etc... If one of the screens is modified during the next release, then the BDCDATA will no longer work. So I need to launch a transaction from within my ABAP without having to worry about future changes implemented by SAP.
Any ideas?
Your help is greatly appreciated,

Hi,
It depends on which transaction you are looking for. Usually it comes by experience. You can search in SE37 or transaction BAPI to find out relevant BAPI suitable for you. All BAPI FMs starts with name BAPI.
eg: If you want to findout the BAPI for VA01 transaction, try like this.
SE37=> enter BAPIsalescreate* and click F4.
You can see below list of FMs.
BAPI_SALESDOCU_CREATEFROMDATA
BAPI_SALESORDER_CREATEFROMDAT1
BAPI_SALESORDER_CREATEFROMDAT2
BAPI_SALESORDER_CREATEFROMDATA
BAPI_SALES_DEL_SCHEDULE_CREATE
BAPI_SALESORDER_PROXY_CREATE
BAPI_SALESDOCU_CREATEFROMDATA1
BAPI_SALESDOCU_CREATEWITHDIA
By looking at the name we can identify upto 60%. Just go through the FM documentation and see if it works for u and how to use it.
SCN is always there to help us out. But before posting to ask for a BAPI, please search and give a try to findout:)
Thanks,
Vinod.

Calling a Standard SAP transaction VA03 from another web dynpro application

Hi All,
I have a requirement wherein I need to call the standard SAP transaction VA03 whenever a sales order is selected in some other we dynpro application so that the sales order gets displayed.
No regarding usage of OBN for the above functionality I have certain queries:
1. In order to call VA03 do I need to create a transactional iview for it or is there any direct method.Also how to pass this sales order number as parameter to the T.Code.
2. Can we use standard business object BUS2032 for OBN or a new Business object is created.What exactly is the purpose of these standard business objects in portal and when should they be used.
Thanks in advance
Aman Gupta

Hi Aman - Do you have a portal team in your project or you have to create the IVIEWS yourself?
I do have a portal team and I dont know how they create the IVIEWs but for example, I will go to my portal team and I will ask them to create an IVIEW for TCODE VA03, they will created and they will tell me the input parameters they entered for the IVIEW so I can call OBN and display in webdynpro.
SAP in SRM has webdynpro e.g. for BUS2121 and they have an IVIEW already implemented in the portal context pointing to the webdynpro of BUS2121 so we can used the IVIEW by calling OBN and passing the parameters; in my case the object_type will be 'shc' and the operation will be 'display' and the paremeters itab will be the GUID of my shopping cart, that way the OBN can understand which Shopping cart open and in which operation mode.
I also did something like your requirement, I need it to display a specific case in Records Management but SAP has a standard IVIEW for records management 'RMREGEDIT' that didn't work for my requirement so I went to SE38 created a program that displayed the case based on GUID and I created a TCODE of my custom program. Portal team created a custom IVIEW of my custom TCODE and they told me the input parameters to call the TCODE in OBN and I pass in the itab parameter the GUID of the case using the FM that I post before.
The action to call the OBN is in the event handler ON_CLICK of my ALV and the action is getting trigger when the user actually clicks a HYPERLINK in the ALV.
Hope this helps you!
Please feel free to ask me more details if you need.
Jason PV

How to change the field length in standard sap program.

Hi All,
How to change the field length in standard sap program.
Urgent
Example:
Text1 type c length 75,
To change :
Text1 type c length 150,
Point will be rewarded..
Thank you,
Vikram.C

If the only solution is to change the sap standard program, simply change the program, it will prompt for an access key. This key can be retrieved in the SAP support portal (service.sap.com) at keys and requests, sccr keys, register object.
Sometimes these actions are outsourced to a competence center, so maybe youre not entitled to do this, in any case ask a resident senior developer for support.
regards, Rob

Adding fields to the standard Report

hi ,
could u plz tell me what r the guidelines we have to follow
while adding fields to the standard Report. (Ver ECC 6.0)
in QA32 Tcode, after executing it will generate a report there i hv to add it.
I could find structure of that main final table, i hv appended desired field also,
Now im looking into Enhancement spot for it, is there any method to do it.
Plz hv eye on it.
Regards
Vivek

Hi ,
this is the exact answer for your question.
Go to the inclide RQALVF14 in this there is a perform call_listviewer_f14, in this the output is displaying using REUSE_ALV_GRID_DISPLAY function module . before this do like this ..
modify the output table p_object_tab like this .
the output table is of structure QALS_D02 you can extend this by appending a structure with the custom fields and there is an enhancement ( i have checked it) in this routine call_listviewer_f14 in RQALVF14. Create an enhancement in this routine at the start of the routine and modify the output table using your custom code in it , then you wil get the data as well as fields into fieldcatalog,.
Regards,
Venkat Appikonda.

Adding fields/text on standard SAP transaction screens

Similar Messages

Maybe you are looking for