Adding files and using coverflow changed mp3 track numbers to 49, 50, ect.

I imported my MP3 library into iTunes 7 and originally everything was fine. After using coverflow to update the album art, all of my track numbers changed. Now the ID3 information for my tracks is labeled as track numbers ranging from the late 40's (48, 49) to the 50's or 60's (58, 59, 60). See the following image. http://www.twofields.com/wrongtrack.JPG
It's also changed the information in Windows. This image shows that http://www.twofields.com/wrongtrack2.JPG
Please help; I have over 4000 MP3s and they've all been affected. This has only affected my MP3s, the iTunes music is fine. I originally used musicmatch to label and tag my files.
Custom AMD 64 Windows XP

When I view this topic I see
"This question is not answered. "Helpful" answers available: 2. "Solved" answers available: 1."
at the top. How do I find those answers?
This isn't even there anymore. I don't know what happened to it, but it's gone. I'm not really worried about it though.
The MP3 Tagger will work good enough, but I really think Apple should release a patch or some way to fix it. This is going to be very time consuming.

Similar Messages

ITunes Match has stopped uploading - every file errors and says waiting - I have tried to delete the files and use other formats etc. I have had the service since Day 1 and NEVER had an issue. It didn't start until the Delete from Cloud switch to Hide

iTunes Match has stopped uploading - every file errors and says waiting - I have tried to delete the files and use other formats etc. I have had the service since Day 1 and NEVER had an issue. It didn't start until the Delete from Cloud switch to Hide from cloud - the files that do not upload show grayed out on my other devices.

Have you confirmed that you successfull purged iTunes Match by also looking on an iOS device? If so, keep in mind that Apple's servers may be experiencing a heavy load right now. They just added about 19 countries to the service and I've read a few accounts this morning that suggests all's not running perfectly right now.

Read from a .db file and use the values within a program

each account has 3 values.. (password, balance,id_number)
my .db file contains the following.
pass201 250 9885 pass202 300 5547 pass203 700 1123
(this is 3 accounts)
I need to be able to read from this file and use each attribute within my program... HELP!

String[][] accounts = null;
try
     // Open a file input stream
     FileInputStream fileContents = new FileInputStream("filename");
     byte[] data = new byte[fileContents.available()];
     fileContents.read(data);
     fileContents.close();
     String contents = new String(data);
     StringTokenizer values = new StringTokenizer(data); // using space character as delimiter
     // Using 3 values per line
     int lines = (int)(values.countTokens()/3);
     int columns = 3;
     accounts = new String[lines][columns];
     for(int i=0; i<lines; i++)
          for(int j=0; j<columns; j++)
               accounts[i][j] = values.nextToken();
catch(Exception error)
     // debug stuff
}

How to get URL of a certain file and use it as an attribute value?

Hello, I am using JDeveloper 11.1.2.3.0
I want to get the URL of a file and use it as input of another attribute. I used inputFile but I can not get the URL directly from there. Do I have to build a managedBean? Can anyone help me with an idea on how to do this? If you could help me with a simple method it would be great.
Thank you

Hi,
seems to need to step back for a moment and learn about how file input works if you don't know how to access the uploaded file. Please read
http://tompeez.wordpress.com/2011/11/26/jdev11-1-2-1-0-handling-imagesfiles-in-adf-part-2/
Frank

To add the JNI dll to the jar file and use the dll inside the jar file

Hi to everybody,
I am new to java.
I want to add the JNI dll to the jar file and use it in the java class.
How can I achieve it.
Please help me.
Thanks in advance.
Regards,
M.Sivadhas.

can't be done because none of the known operating systems support reading binary libraries from .jar files ... you can add the binary to the jar but then you have to extract it...
besides, mixing platform specific and platfrom independent components is not a very good idea, i'd keep the dll out of the jar to begin with

When trying to move file and use command and drag, it doesn't move the file just creates a short cut.

When trying to move file and use command and drag, it doesn't move the file just creates a short cut.

Using command creates a copy.
If you want to just move a file, click on it, hold it and drag it to the new location.

[svn:osmf:] 14428: DVR, CR feedback: adding comments, and using Math.min/ max.

Revision: 14428
Revision: 14428
Author:   [email protected]
Date:     2010-02-25 12:46:16 -0800 (Thu, 25 Feb 2010)
Log Message:
DVR, CR feedback: adding comments, and using Math.min/max.
Modified Paths:
    osmf/trunk/framework/OSMF/org/osmf/net/dvr/DVRCastNetConnectionFactory.as

Freezing when trying to backup-shows adding files and then processing

I'm having an issue when backing up my phone. I currently have 4.0.1 on my iphone 3g and when I hook up to itunes to back up it goes thru the normal steps until it gets to "syncing bookmarks". It then pops open a new window that says "adding files" and inside says "processing: 20100202 103854 1.m4a" or "processing 20091212 200447.m4a". I have uninstalled and reinstalled itunes and all apple software thinking it may have been an issue with the latest upgrade but that hasn't helped. I have to shut down itunes completely because it shows as "not responding". Please help, anyone know how to fix?

Read Harm on drive setup http://forums.adobe.com/thread/662972?tstart=0
- click the embedded picture in Harm's message to enlarge to reading size
>source files are on my other internal 7200rpm sata drive (same drive my adobe suite is loaded on
I have never done this so do not know from personal experience, but I have read in these forums that Adobe software does NOT like to be installed on anything other than the boot (usually C:) drive... click the link above

When I open iTunes on my new computer using the .itl file, and using the same external drive holding the songs, all of the songs I added to iTunes up to a certain date have broken links, while none of the songs have broken links on the old computer.

I want to open the iTunes library on my new laptop with all the playlists and stuff I built on the old computer. I have all my music on an external drive. I have copied the .itl file from the old computer and opened it on the laptop, and it has all the playlists, but all of the songs that were added to iTunes up to a certain date have broken links. What am I doing wrong?

Moving library files around while leaving the data in the same place usually presents no problems. Moving the data around independently from the library usually breaks things. With Windows machines all you should need to do is make sure that the same drive letter is being used on the new system as with the old. If that is not possible you need to get your library into a portable layout before moving it between systems.
Typical layout of iTunes folders:
When the media folder is inside the main iTunes folder as shown above then the library is portable. Typically with a split library the iTunes Music or iTunes Media folder (everything inside the red outline) is moved to a different drive by choosing a new locaton for it and then consolidating.
To make the library portable again you need to copy the library files and album artwork folder into the parent folder of the media folder so that the nested relationship is recreated. (BTW If your media isn't already inside your designated media folder then you will also need to consolidate the files that are outside of it, before you copy the library files.) You can then use the hold-down-shift-when-starting-iTunes method to open the library file in that parent folder. Once the library has been opened, tested and closed you are most of the way there.
The iTunes window inherits its title from the folder holding the library files so, unless you created a folder called iTunes to hold the media folder, iTunes may now have an unexpected title when you run it. The parent folder can be renamed as iTunes, and the library opened again. Alternatively, if the parent folder is at the root of the drive, or has other data which you wish to leave in place, you can create a new top level folder called iTunes and move the library files, album artwork and media folders into it before opening and testing the library again.
If the library doesn't work after any step simply reverse it by undoing a move or rename or opening the previous set iTunes Library.itl file.
If all has gone well then the library is now portable. Once you've migrated the data to a new system you can copy the library files back to their usual internal location if you find that having them on the external drive affects performance...
tt2

Changing MP3 Track Names in iTunes 11 for Exporting to CD

I'm trying to export my playlists from iTunes 11 to an MP3 CD/SD Card to play in my car. When I export the songs/play lists the, iTunes names the file names as the track number and song name (i.e. "01 song name.mp3", "02 another song name.mp3"); which makes it difficult to search for a song while driving.
Ideally, I would like to export the MP3 files as <Artist Name> - <Album Name> - <Song Name>, but will compromise if there are limitations
I tried downloading another software but then it changed all the album names around when it imported the album names and still exported the same way previously, which I'm trying to avoid doing again.
Is there a way to do a mass change retroactively using iTunes for my entire library? I've been seeing posts about changing the default naming structure when importing a new files to the iTunes library, but not in this situation.
MacBook v. 10.6.8
Using iTunes v.11

Make a new folder on your computer which will represent the CD you want to create. Drag the tracks from iTunes to that folder. This will put copies of the files in the folder. Now I haven't needed to do this but what I say should work, though I have to add I have always manually managed my music so in some of hte places where iTunes will fight you I have no problems.. Make a new iTunes playlist which is a scratchpad for working on these files. Select the files and hold down the option key while dragging those files back to iTunes (alternatively, create a new iTunes library just for working on your mp3 CDs by holding down the option key while starting iTunes). Option dragging will have iTunes use the file in its original location and not put it in your media folder. Next look on the Dougscripts website for a script which lets you rename files (probably File Renamer). Use that to rename your selected files as desired. You can use Finder's burn utility to burn this folder to a data CD since that's all a mp3 CD is anyway. However, realize that your car player is likely to simply play everything by file name unless it is a sophisticated player that can read metadata tags (which is sounds like it isn't), but at least the file names will include more complete information.

Add jar files and use those classes at the runtime

Hi All,
I need to add some jar files at the runtime depends on which the user selects where the jar file is located and i need to import those classes in other class for some functionalities . I could add jar files by using the URLClassLoader and Class.forName("myjar.myclassname") is also succeeded and i have no clue how to use those classes with in the jar file as i couldn't import those classes also in the source because the jar files are being added at the runtime(This leads to class not found exception at the compile time).
I had found a complicated way of using those classes after being added at the run time as below.
   Class clazz = Class.forName(myClass);
            final Method method = clazz.getDeclaredMethod(requiredMethod, new Class[]{URL.class});
            final Object returned = method.invoke(clazz.newInstance(), new Object[]{request}); but, its really pain to use in this way in all the places.
Does any of you have simpler suggestions on how to achieve this?
Thanks,
Venky.

Thanks jschell. Yes, you are right. I had found that using reflection API is the only way to load classes at the run time. But according to our application using reflection makes the application little complex, so while start of the application or during other modifications, i am overwriting my jar file to the latest one using FileChannel class as below
      FileChannel ic = new FileInputStream("new.jar").getChannel();
      FileChannel oc = new FileOutputStream("old.jar").getChannel();
      ic.transferTo(0, ic.size(), oc);
      ic.close();
      oc.close();After this code is executed, our application totally uses the new jar file.It is little fast than using reflection. Is this a good idea?

Importing Excel files and using a search function to use specific data based on user selection

Hi, I'm trying to create a search and solve function within Visual Basic.
I want to use the combustion equation C8H18 + 20(O2 + 3.76 N2) = 8 CO2 + 9H20 + 47 N2 to determine flame temperature using
9*Hf of C02 + 8 * Hf H20 + 47 Hf N2 = Hf C8H18
I have all of the values of Hf in an excel spreadsheet but I want to be able to search the spreadsheet as my application requires the user to change to fuel (the C8H18 bit) which changes the value of Hf.
Is there a way of searching that excel file each time I run my program?
Thanks
Jack

Thanks for answering so quickly.
I've used that method before, and I'm sorry I didn't specify.
This will be used as a student learning aid and so the application itself and the tables will be downloaded as a zip file and so I don't believe the line below would work?
I've heard about including excel as a reference file in the application but I haven't been able to find any further information on that.
Thanks again
Dim oWBa As Excel.Workbook = oApp.Workbooks.Open("C:\Users\v-youtan\Desktop\colleagues.xlsx")"

Create a css file and use it

Hi
i use jdev 11.1.1.7
I have several items on the page . for example panelFormLayout .
i want declare several property (background-color ,...) and assing it to all of panelFormLayout .
so whenever i change color of background , background color of ALL panelFormLayout change easily .
(I created a css file and declared my property in it but i cant use it !!! )
NOW i hope to create a CSS file or(any thing you suggest) for this reason and use it .
How can i do this ?
Thanks alot

You can also download the stand-alone Skin Editor to help you create the skins and style you want.
A bit more on the topic here:
https://blogs.oracle.com/shay/entry/styling_specific_adf_components_with

I lost my "recently added" file and can't get it back.

I lost my "recently added" folder and can't get it back.

If the "recently added" playlist is no longer visible under your lists of playlists, you can just make a new one and set it with the parameters below.
In iTunes, go to File, New Smart Playlist. In the dialog box that appears, change the settings to look like the one in the screen grab:
These are the exact settings from my default recently added smart playlist. Customize to your liking.
Hope that helps...

Adding files and folders to TFS

I have created some folders and files from command prompt tool(extjs). Then i have opened Visual studio 2013, click "view all files" and include all folders and files into project.
The problem is that when i check in the project to source control, the files and folders are not there.
CMD creates too many files and folders that I would add each one manually to my project - this way folder is visible in TFS.
So, how can I add folders and files created outside visual studio to my TFS project?

Hi!
You may try the local workspace and promote function: (as example) http://roadtoalm.com/2013/06/13/using-local-workspaces-promote-excluded-changes-with-tfs-2012-api/

Adding files and using coverflow changed mp3 track numbers to 49, 50, ect.

Similar Messages

Maybe you are looking for