Adding fingerprint reader to X230

Hi All,
I have an X230 to which I would like to add fingerprint reader. I have ordered a brand new palmrest with fingerprint reader. My question is, is this a simple plug and play operation or will there be bios config to do and drivers to add?
I have an mSATA SSD will this cause any issues??
Anyone added a fingerprint reader to their X230?? if so was it straight forward or did you come accross an issues?
I look forward to any information and suggestions.
Thanks,
K
Spec for X230
ThinkPad X230 (2325) | CPU I5-3210 (2.5GHz) | RAM 8GB | 128GB mSATA | 180GB Intel 520 SSD | 12.5" IPS Panel | Intel HD Graphics | Intel Centrino Advanced N6205 2x2 AGN | Intel PRO/1000 LAN | Bluetooth | Low-light 720p HD camera | Dolby Audio | Backlit Keyboard
Win7 Pro 64bit
Solved!
Go to Solution.

Similar Messages

Fingerprint reader functionality in Arch; possible?

Thus far I am loving my first (actual) install of Arch, but am begginning to miss the use of my fingerprint reader. If theres no way it will work, I suppose thats ok, but I feel like its a waste of some nifty hardware.
I have a Thinkpad X60s. Let me know if any other information is needed, and what I'd need to install/configure to get the fingerprint scanner working (if its even possible).

Atreides wrote:
falconindy wrote:
google?
http://www.thinkwiki.org/wiki/Integrate … int_Reader
Sorry, long day yesterday...
I installed it through pacman, added "uinput" to "modules" in rc.conf, then used "tf-tool --verify" to scan my fingers. It worked perfectly to that point, but what exactly do I have to do to make it so that it asks for a scan on login? Theres so many distros listed on the thinkwiki page, I'm not sure what I need to do.
Read up on the pam_fprint module for pam.
Edit: btw, fingerprint is horribly insecure, a good password is way better.
Last edited by Mr.Elendig (2009-12-16 16:12:09)

T500 fingerprint reader - Windows 8.1 fingerprint option missing "enable biometic framework"

Hy,
It's my first post here. I got a LENOVO t500 at work to use and I wanted to try to use finger print auth to log in. Its in a domain, but I got local administrator privileges on it. The machine runs 64bit Windows 8.1 Pro.
The fingerprint reader driver was missing in the first place (windows identified it as a fingerprint sensor but had no driver).
The sensor is an AuthenTec Inc, AES2810. I've tried to install the lenovo driver:
http://support.lenovo.com/en/downloads/ds034486
But received the error message in the subject about I need to enable the biometric framework.
I've also seen
http://forums.lenovo.com/t5/T400-T500-and-newer-T-series/T420-Windows-8-1-fingerprint-reader/m-p/124...
and downloaded-installed an authentec driver successfully, so now device manager shows it and identifies it as it should..
Well I've went to the group policies as it was suggeseted everywhere on the net and turned on the options.
I've also checked and found a windows services that had biometrics in it : I've set it to auto-start and started it right away.
But even after all of this the fingerprint option is missing in the accounts sign in page in pc settings.
I've restarted the machine multiple times (with the real restart )
Could you please give me a hint?
I've spent a whole day looking for this yesterday..
Have a nice day & Regards,
Steve

Yes, but only after you enroll your fingerprints in the Fingerprint Manager, then Windows will tell you that Biometric logon is not enabled, and then you're given the option of enabling it.
However, for domain machines, this can be enabled thusly:
Goto: Control Panel\All Control Panel Items\Biometric Devices
Click: Change Biometric Settings
Click both:
Allow users to log on to Windows using their fingerprints
and
Allow users to log on to a domain using their fingerprints
Restart the computer.
Click: 'Switch user' at the log on screen and choose the fingerprint icon (this of course requires you to first have added a set of fingerprints to your account)
See if this doesn't do the trick.
ThinkPad W540 (20BG) - i7-4800MQ/24GB // ThinkPad T440s (20AQ) - i7-4600U/12GB
ThinkPad T440p (20AW) - i7-4800MQ/16GB // ThinkPad Helix (3698-6EU) - i5-3337U/4GB
ThinkPad W520 (4282-W4Q) - i7-2720QM/32GB // ThinkPad T400 (2767-W1C) - P9500/8GB
ThinkPad T61 (7665-CTO) - T7700/4GB // ThinkPad T60p (8741-C2G) - T7400/4GB

Fingerprint reader iphone 5s

I'm sure you the end result of this is going back to ATT with my phone but I was wondering if anyone else is having trouble with the fingerprint reader on their phone? My daughter's works first time every time. I'm putting the passcode in 95% of the time. I've re done my "fingerprint" about 5 times and have added most of my fingers and thumbs that I'd ever use and they almost never work.
It's such a pain in the butt trying 3x and getting the notice "unrecognized fingerprint" on 5 different fingers. I delete them all, add them in again and they work for about a day. Then I'm back to being unrecognized again. I've read they are failing 20% of the time. If mine worked 20% of the time I'd be thrilled.
Will Apple replace my phone or am I stuck with it?
Susan

Ok my best advise is you already set up you main finger print on your iPhone (which is yours) try someone else's and see if there's work. If not then don't worry about your iPhone AT&T will have to replace it because the iPhone is then faulty but just double check with someone else's finger print.(Someone you trust) and then you can remove there fingerprint later.

Fingerprint Reader on Lenovo Thinkpad x220

Hey guys, I'm having a few problems installing the fingerprint reader on Arch Linux. I have the 147e:2016 UPEK fingerprint reader according to lsusb. As far as I know, libfprint-UNSTABLE supports that, but I think it causes a few problems too. Sometimes fingerprint-gui crashes from "Segmentation Fault" and I tried adding it to the PAM sudo file, but whenever I run sudo something, it doesn't ask for a finger swipe. The green light also does not turn on. So, I tried manually running /lib/security/pam_fingerprint-gui.so and it returned "Segmentation Fault." I followed the fingerprint-gui on the Fprint page on the Arch wiki, but didn't work. So then I tried the fprint method, but all the packages they listed to install (Excluding PAM) were not found. I googled the package names (libfprint and pam_fprint) and it returned results from the arch package place, but when I clicked on them, it said the packages weren't found. Any ideas on where I could go from here?
Last edited by kkeller (2011-07-03 20:51:02)

Just a FYI. I did some poking around on this and found something interesting, so I thought I'd pass it along.
Disclaimer: I have NOT tried this, and don't even own the fingerprint reader in question.
Anyway, here's the trail I followed...
The ThinkWiki page here:
http://www.thinkwiki.org/wiki/Integrate … int_reader
points to patches from a year ago in this bug report:
https://bugzilla.redhat.com/show_bug.cgi?id=504399
So I downloaded the libfprint-0.4.0-1.fc15 and fprintd-0.4.1-1.fc15 Fedora 15 source RPM packages by drilling down from here:
https://admin.fedoraproject.org/updates … b1ec4e90dc
Then I exploded the RPMs and looked at the "spec" files... and here's where it got interesting.
Fedora seems to be getting the source code for both libfprint and fprintd from here:
http://people.freedesktop.org/~hadess/
and not from the "official" code repository like the Arch AUR packages do.
So... you may want to give that code a try... or not

Fingerprint reader not recognized on Pavilion dv4t-1400 laptop

Within this last week, my fingerprint reader is no longer running on my Pavilion dv4t-1400 laptop. I believe it stopped when last week there were two usb problems which are still unresolved --- i.e., under Device Manager, there are two USBs with a yellow warning triangle and after trying to troubleshoot, it says "Windows has stopped this device because it has reported problems. (Code 43)".
I've reinstalled the Validity Sensor software several times but this doesn't make a difference.
BTW, to the best of my knowledge, there hadn't been any new software updates prior to the USB errors.
This question was solved.
View Solution.

This problem is resolved once I powered down my laptop, unplugged the AC adapter and all external connections, removed the battery, waited about one minute, resinserted the battery, and restarted my PC.
The Validity Sensor driver was automatically added by Windows, and my fingerprint reader is now recognized and working.

IPhone 6 fingerprint reader is not working.

So my iPhone 6 fingerprint reader stopped working. When i try to enable it it just says: "Failed, please try again later". I've tryed to update to iOS 8.3 but that fails too. What should i do? I recently fixed my cracked screen if that has something to do with it.

it dosent get hot, but if i push it in it can move sideways (i dont think thats a good sign) and when the phone is in standby the home button dont work at all

Ubuntu 13.10 on a T440 - Wifi, Sound, Fingerprint reader and TrackPoint issues

I recently got my t440 and put Ubuntu 13.10 on it and have had a few problems pop up. Hopefully someone here can help, or I will find solutions and post here as things get working again.
Wifi - I have a Thinkpad 11b/g/n 2x2 wireless card. I do not believe there are currently Linux drivers provided for this card. According to thinkwiki, the 1x2 version of the card works with real tek's rtl8192se driver; I have tried to load it with modprobe, but it does not work for this card. There might be a solution to this with ndiswrapper, but I haven't been successful. I have ordered an intel wireless card to replace this one.
*-network UNCLAIMED
       description: Network controller
       product: Realtek Semiconductor Co., Ltd.
       vendor: Realtek Semiconductor Co., Ltd.
       physical id: 0
       bus info: pci@0000:03:00.0
       version: 00
       width: 64 bits
       clock: 33MHz
       capabilities: bus_master cap_list
       configuration: latency=0
       resources: ioport:3000(size=256) memory:f0400000-f0403fff
Sound - The sound works when ubuntu boots, but usually crashes shortly thereafter. There are some known sound issues with 13.04 and 13.10, but I haven't been successful stopped the problem with their suggestion.
http://itsfoss.com/fix-sound-ubuntu-1304-quick-tip/
http://askubuntu.com/questions/361730/no-sounds-after-upgrade
Fingerprint reader - All previous thinkpads had AuthenTec fingerprint readers; this generation ships with Validity readers. Info on thinkwiki is describes installing fprint, but fprint does not recognize the validity reader. This post looks promising.
http://www.tuxtrix.com/2012/05/how-to-activate-validity-fingerprint.html
TrackPoint - The trackpoint pointer works fine, but lenovo did away with the physical left/middle/right click buttons. The top on the touchpad can be pressed (in windows) for left/middle/right click, but I haven't gotten this functionality enabled in Ubuntu yet. Might be able to fix this in the xorg.conf file
http://www.thinkwiki.org/wiki/Synaptics_TouchPad_driver_for_X

Fingerprint reader- above links do not resolve the problem. fprintd and frprint-demo do not recognize the Validity fingerprint sensor. My issues are the same as described in this post.
Output from lsusb
benjib0t@benjib0t-ThinkPad-T440:~/Downloads/fprint_vfs5011$ lsusb
Bus 001 Device 002: ID 8087:8000 Intel Corp.
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 003 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub
Bus 002 Device 004: ID 04f2:b39a Chicony Electronics Co., Ltd
Bus 002 Device 003: ID 0bda:8761 Realtek Semiconductor Corp.
Bus 002 Device 002: ID 138a:0017 Validity Sensors, Inc.
Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
The device id is 138a:0017. In this fedora forum, a user successfuly gets a 138a:0018 to work.
1) Clone and compile this git repo: https://github.com/maffmeier/fprint_vfs5011.git
git clone https://github.com/maffmeier/fprint_vfs5011.git
cd fprint_vfs5011
sudo apt-get install libusb-1.0-0-dev libnss3-dev libglib2.0-dev libgdk-pixbuf2.0-dev
./configure
make
sudo make install
2) This has installed libprint is /usr/local/lib, but fprintd still does not recognize the device
3) I created a symlink in /usr/lib to the libfprint I compiled, in hopes that fprintd would pick it up, but to no avail
benjib0t@benjib0t-ThinkPad-T440:/usr/lib$ sudo fprintd
Launching FprintObject
** Message: D-Bus service launched with name: net.reactivated.Fprint
** Message: entering main loop
** Message: No devices in use, exit
Maybe I'll try compiling libfprint too...

X1 Carbon Touch Fingerprint reader 'cannot find fingerprint sensor device' e7210005

Hi all,
I've spent far too long trying to solve this by myself, and need to reach out to someone who might have resolved this issue. I've read tons of similar questions online, and rebooted dozens of times after trying many different things.
I have a Carbon Touch 3444-CUU that can't see it's fingerprint reader. It used to work when brand new, but after lots of lenovo and windows updates, it now does not:
I am on Windows 8.1, with all updates.
No problems in device manager.
Touchchip Fingerprint Coprocessor (WBF advanced mode) installed under Biometric devices fine.
Power management set to _not_ turn off device to save power.
The bios is 2.61.
I suspect the problem is very low-level, because even the BIOS cannot find device when trying to set it up.
If I have the lates BIOS, but it can't see the device - what can I do?
Thanks everyone..
Solved!
Go to Solution.

BleachedWhale......which settings you have changed in the BIOS......
It is possible to work-around the issue, but some manual steps are needed:
1. delete "smihlp.sys" from "c:\program files\thinkvantage fingerprint software"
2. run "services.msc" and stop the service "Windows Biometric Service"
3. delete the file "031D23AD-15AF-4e25-B7B3-DE34893097ED.DAT" from "c:\Windows\system32\WinBioDatabase"
4. reboot the computer (important!!)
5. now try to enroll some fingers
This should make it possible to enroll fingerprint and use it to log into Windows, until the bug can be fixed in some future version of BIOS and/or Fingerprint software.
Best regards from Germany....

My HP Probook 450 G0 fingerprint reader is not working WIndows 7

Hello,
I am trying to enable my HP Probook 450 G0 fingerprint reader.... I tried many driver version of validity sensor... and finally i have currently installed the driver and software that are mentioned in following link....
http://h30434.www3.hp.com/t5/Notebook-Operating-Systems-and-Software/DV4-1240br-FingerPrint-Driver-f...
Both are them working fine (**without any error) But DigitalPersona is showing me the following message on welcome screen.... "The FingerPrint reader is not connected.Connect the reader"....
OS : Windows 7 Professional
What do you say.....is there any compatibiltiy issue or any hardware issue....or if there any driver mismatch, can someone suggest me the supported driver version....
Thanks in Advance

I have the same problem as the original poster, and followed the download link you provided only to encounter the exact same issue. I am using Windows 7 and bought this machine two days ago. I don't understand why this singular process is this problematic. I really miss my ASUS K53E and it's face logon feature.
Perhaps HP should take lessons unless they have something better than this "fingerprint reader." The only consistent feature I am detecting is its inconsistancy. Oh well, I just won't bother using it, or put a sticker over the thing.
If I have to spend more than an hour troubleshooting a feature of medium to low importance then it was a mistake to purchase the machine (but it was a gift sadly), and it was a mistake to implement the feature and release it without making sure it works. Pretty weak HP, but not as bad as Toshiba or Gateway/Acer at least--not that it says much.
Anyone have a legit fix for this annoying issue? Or some third party facial recognition login program instead?

Fingerprint reader not working in IE and saying failed to connect to sensor

Hi all,
I bought a Qosmio x500 10t a couple of months back. For the first couple of weeks i had no probs using the fingerprint reader to log in to windows and to log in to websites in Internet exploer.
All of a sudden it would not work on any website stored. The green banner showed accross the top of site and asked to swipe finger but nothing happened when I swiped. I rebooted and it worked again but not for long before failing. This time a reboot didnt work so i deleted my finger prints and websites and started from scratch. That worked for a couple of attempts before probs started again. And on trying to get into Fingerprint utility it says failure to connect to sensor. So, I did a system restore. It worked for a couple of times again and then same probs. So I found the updated utility software, uninstalled the old and put on the new. Same again, worked for a couple of times then failed.
I could not find anything stuck in the registry but to be on the safe side i did a full system clean back to factory setup using backup discs. Hey presto i thought it had worked. Everything going ok for first 24hrs and then same problems start to occur. Only this time it is also prompting me to enroll fingerprints even though i already have. And when i try to get into the utilioty it says failed to read sensor again.
The fingerprint log on to windows always works as long as i dont close the fingerprint utility down before shutting down. If i do exit the utilty i cant reopen it as it just says failed to connect to sensor. And then i have to unistall and reinstall the utility software. Aty the moment it occasionally works on websites stored but most of the time it doesnt do anything.
Please help. Do I need to send laptop back to Toshiba??

Hi,
*I got a solution* for the problem that the fingerprint sensor "suddenly" does not work any more.
When starting the Toshiba Fingerprint Utility, it says "failed to connect to fingerprint sensor".
Is it possible that just before it stopped working there was a new firewall installed, or firewall settings had been changed?
*In my case, the problem was solved by changing my firewall settings* (Windows 7 Firewall Control) to ALLOW all traffic for
the Authentec Fingerprint Sensor Service (AFSS). It is the file "AtService.exe" in C:\Program files
The reason is simple:
The Toshiba Fingerprint utility communicates with the fingerprint sensor service via TCP/IP.
Therefore, any firewall that blocks traffic on the local computer will block the communication.
*After changing my firewall settings, fingerprint sensor works* on my R700 flawlessly now.

What can be done with the fingerprint reader?

I am trying to figure out simply what I can do with the fingerprint reader on the T400. I understand how to use it to log into the computer. My main question is whether or not I can use the fingerprint reader in the following contexts, and if so how.
1a) To log into internet password protected websites. When I use IE, the password manager pops up and prompts me to save a password. If I save it, I can return to that website and it automatically will enter the login information and password for me. I want to know whether you can have password manager (or another program) prompt the user for the fingerprint and then submit the login information. That way the information is protected each time I log in, but I do not need to enter log in information each time, only a fingerprint.
1b) If this is possible in IE8, I would like to know if it is possible in Firefox 3, in which password manager does not pop up.
2) Can it be used to log into MS Outlook.
3) Can it be used to lock documents in MS Word.
I much appreciate any information letting me know if these can be done, and if so, how to do them. Thank you very much for your help!
J
Message Edited by lenova on 09-07-2008 09:13 PM

After playing with it for a while I figured out at least questions 1a) and 1b). For anyone else who has the same questions:
1a) Have your browser save the password using Lenovo's Password Manager. Then open password manager and open that item. Click the advanced tab and change the security level to custom. Click "Customize Security Policy" and select "Protect with a Fingerprint."
1b) Lenovo has a patch to synch Password Manager with firefox 3. It can be found here and is much easier than the manual fixes found on this forum.
http://www-307.ibm.com/pc/support/site.wss/document.do?sitestyle=lenovo&lndocid=MIGR-70132
I am still looking for help with 3) and 4), particurally 3). Please let me know if you have any ideas. Thank you very much!!

My fingerprint reader is not recognized by DigitalPersona when I upgraded to Windows 7

My fingerprint reader worked with Vista but when I upgraded to Windows 7 it is not recognized by DigitalPersona.
I have a dv3-1075us with the AMD Turion X2 dual core mobile RM-72 2.10 Ghz processor. I have updated the BIOS to F.15, there is not a biometrics option in the BIOS for me to turn on, Authentec Driver 20.0.18 dated 11-24-2009 (Device Manger does nto show an error), and running Digital Persona Personal version 4.11.3826.
I have updated this from the troubleshooting section of the HP Support website.
At the windows login I get a "Reader not detected" message and in DigitalPersona "The fingerprint reader is not connected. Connect the reader."
What further steps can I do to get my fingerprint reader working?
Thank you for your help.

I've got an HDX9350 that I originally ran on Vista, and later upgraded to 32-bit Windows 7 Ultimate. I managed to make most functionality run on that installation, albeit buggy and slow, running assorted drivers in compatibility mode.
Earlier this week I installed the 64-bit version od Windows 7 Ultimate, because the upgraded installation did run into problems sometimes, requiring a long time to get an ip address etc. I was surprised to see a lot of drivers being automatically installed, includingdrivers for the AuthenTec 2501A fingerprint sensor.
I stumbled upon AuthenTecs own basic software, allowing You to log onto the computer and that worked. Or was it Window' own? Never mind.
Installing Digital persona resulted in no reader detected all of the time, despite following instructions on this forum.
Installing HP's SimplePass, things worked straight away! Maybe Digital Persona isn't compatible with Windows 7, or with my HDX9350?
A

Fingerprint reader on DV6t no longer works on windows logon

For some reason the fingerprint reader on my Pavilion Dv6t, LM720AV, does not work on windows logon anymore
I get the usual lock screen where I have to enter my password. The fingerprint option no longer appears
I have tried rebooting, powering off, reinstalling the validity sensor package sp55109 and it still does not work
Any help would be greatly appreciated
Thanks

Export the Webcard Database:
If you have working SimplePass software, Export your Webcards before proceeding. In the event that you must later remove the SimplePass software, your webcard backup can be used (imported) to restore your website login information.
Start SimplePass > Settings > Export NOTE: File will be named *.tsd
Then:
Try / Consider:
===================================================================
The Hard Reset:
This method works for a variety of Driver connection and ‘stuck’ program issues.
Shut down the computer
Disconnect all external devices - everything.
Remove (disconnect / unplug) the AC power
If the notebook contains a removable Battery, remove it
Press and hold power button for at least 30 seconds
Reinstall the AC power cord for first startup ** See Note
Power on - Log in
Next time you shut down the system, reinstall the battery.
** Note: If time is short, reinstall battery the first time and be done with it.
Reference:
Hard Reset to Resolve Hardware and Software Issues
===================================================================
If that does not resolve the issue, then try this:
Repair the SImplePass Software:
Control Panel > Programs and Features >
Look for this program:
Right-Click on HP SimplePass
Select "Repair"
Restart / Reboot your computer and log in...
====================================================================
Kind Regards,
Dragon-Fur

Z61M - Fingerprint reader disabled and now I cannot access windows

My fingerprint reader had been causing issues, so I went into the Thinkpad menu and under "manage security options" , clicked on the fingerprint icon and then preceeded to delete what I thought was the fingerprint option/software. I mistakenly thought I would be able to use the password to access windows, however, I'm now unable to get past the CSS User ID window. I can only access Thinkvantage by pressing the blue button when prompted but can't find anything in there to help me. The finger print reader now fails everytime and the Control/Alt/Del button only brings up the CSS User ID and when I hit "ok" it states - "User was not enrolled or his data cannot be opened". When I click options on the CSS ID window and then click "I am not enrolled and want to use my windows password", it states "unable to bypass logon because the user is enrolled" - which contradicts the first message????
I'm really confused and the Lenovo help desk offered no assistance except to "restore to factory settings" but that means I'll lose everything - surely there is an easier solution to getting access to my laptop without a complete reset.

I've managed to work this out myself by going into BIOS and disabling the Security chip which allowed me then to use the password to get access. From there I have now disabled the finger print reader correctly. Hopefully this helps someone else down the track!! Cheers.

Adding fingerprint reader to X230

Similar Messages

Maybe you are looking for