Adding flip4mac video

I have been trying to add a video given to me by the person I am creating this website for over some time now. I put the CD in imovie to compress it as it was too large. It was created on flip4mac trial version, which I know nothing about nor does the person that sent it to me. It will not publish even when I publish all to mobileme. Additionally a new page with just text that I created will not publish after adding the video page. The only page updating is the main page. I am really at a loss at what to do at this point. Should I try to get the HTML code for the video?
This is the error message I get:
An error occurred while publishing file “/Web/.Temporary Web Resources/0C5F76B1-05A6-400B-8670-418E8EC53C41/Kijaso/Portfoliofiles/Media/rrRosefinal1/thumb.jpg”. Try publishing again later.

Try it as a Quicktime file and make sure you export it as the original format as sometimes all that is exported - especially from iphoto is a jpg file unless you specify format. As far as I know Flip4mac is just an add on for Quicktime - if I've got that wrong then someone will tell me. I convert videos with Visual Hub or Handbrake.

Similar Messages

HT4640 Adding a video clip to a keynote presentation - do I have to keep the original video on the camera roll?

I have several keynote presentations that are missing their video clips. Does the original video clip need to stay on the camera roll after you embed it in the presentation? I thought not, because when you add a video, a message comes up saying "compressing video" before it gets added. That made me think that a special compressed version of the original video is made and saved along with the presentation. I've tried testing this by creating a new presentation, adding a video clip to it and then deleting the original video from the camera roll and the video clip in the presentation was not affected. You'd think if the clip were linked to a presentation, that iOS would warn you before you delete it from the camera roll. But I can't think of any other reason why the clips would suddenly be missing from all my keynote presentations.

You can do this with iMovie '06, but not with iMovie '08. You should have iMovie '06 still on your hard disk if you upgraded from iLife '06, or you can download it for free from Apple. Under Editing -> Video Effects, you will find the Fast/Slow/Reverse effect that will do this.

I connected my iPad to my iMac and in iTunes I went to Apps File Sharing and added a video on my iMac to iPhoto on the iPad. I cannot find the video that I added to the iPad. I looked in iPhoto and the camera roll. Any ideas? (BTW, this is a video whi

I connected my iPad to my iMac and in iTunes I went to Apps > File Sharing and added a video on my iMac to iPhoto on the iPad.
I cannot find the video that I added to the iPad. I looked in iPhoto and the camera roll. Any ideas? (BTW, this is a video which I previously had on the iPad but deleted and now I want to add it back.)

Thanks for your reply. I looked in the Video app but it is empty. When I connect the iPad to iTunes on the iMac and look in Apps > File Sharing > iPhoto, the video that I added is in iPhoto on the iPad but I cannot actually find the video in iPhoto on the iPad.

I have accidentially added a video to the photostream upload and now it will not work

I have accidentially added a video to the photostream upload and now it will not work, it would not let me delete the video from the upload file, so I have uninstalled icloud from PC and deleted all the folders. And started again, but still not working

You supply little pertinent about the MBP and the iPhone.
First... on the MBP... Click on the Apple icon.. Top left in Finder...
 > About this Mac > Version...what does it say?
Which iPhone and what is its' iOS Version.

ITunes makes different folders when adding music,videos & pictures

Hi,
I use Windows 7. I have found that when adding music,videos & pictures iTunes makes different folder for it.
I have around 17GB of songs & music. but when I added them to iTunes library it made different folder containing all my songs. Now I have around 34GB of songs. What the ****! It does same for videos & pics.
Please Help!

Hi,
When adding a new song (or any media file) to the iTunes library, it copies those files to a folder (usually C:\Users\<username>\Music\iTunes\iTunes Media\Music ). iTunes does this to keep a backup of your songs. To deactivate this go to Edit>Preference>Advanced (or Ctrl+, then go to Advanced) and uncheck the checkbox "Copy files to iTunes Media folder when adding to library". iTunes will not copy the music files to its folder. But there is one downside to doing so, if you change the directory (folder or place) of the music that you added to the iTunes library (without copying to its folder), the music will not be played. Trying to play such a song will provide you with a messagebox that asks you to relocate the song or to ignore it. So it is always a good idea to allow iTunes copy the music files to the specified folder automatically. But if you are concerned about the disk space, you can delete the songs' copy of yours (the directory you select).
If you want to add some songs to the iTunes Media folder, you right click a song (or multiple songs) and click on "Consolidate Files...". These songs will be copied to the iTunes Media folder and it will be there whatever happens.
If you are afriad that copying a songs will not allow you to copy the music files to another directory from the iTunes Media folder, you shouldn't be. The folder is similar to that of anyother.
Adding a song without using iTunes is also possible, just copy the songs you want to add to "C:\Users\<username>\Music\iTunes\iTunes Media\Automatically Add to iTunes".
Regards,

I added a video to my website but it wont play the entire thing? Does anyone have any imput on this?

I added a video to my website but when I save it and
aynchronize it doesnt play the entire film. Does anyone have any
imput on this?
Thank you.
D Sterlin

Actually I just finished doing what you said and my video
worked!
Thank you so much for your help!
It really was very kind of you.
D Sterlin

Adding a video to a page

One of our team has created a PDF from MS PowerPoint. In Acrobat Pro 9 they subsequently added a page to the PDF and added an MP4 file to it via the Multimedia > Video Tools option. Everything works well except that the video is rendered at a larger size that which it was recorded. The result is that the image appears slightly fuzzy. I can't see a way of controlling the size of the placeholder for the video file. Is there a way?

The problem with plugins is not everybody has QuickTime player or browser add-ons required to play the media. And there's little chance that visitors will download and install required apps just for your site.
The modern approach is HTML5 <video> with MP4, OGG and WEBM files to support all modern browsers and mobile devices.
Below is the HTML5 code:
<!doctype html>
<html>
<head>
<meta charset="utf-8">
<title>HTML5 with Video</title>


</head>
<style>
video {
    max-width:100%;
    display:block;
    margin:0 auto;
</style>
<body>
<h2>Use 3 File Types to support all browsers & mobile devices: MP4, WEBM and OGV.</h2>
<h3>Online Video Converter
http://video.online-convert.com/</h3>

<video controls poster="Your_poster_image.jpg">

<source src="http://techslides.com/demos/sample-videos/small.webm" type="video/webm">
<source src="http://techslides.com/demos/sample-videos/small.ogv" type="video/ogg">
<source src="http://techslides.com/demos/sample-videos/small.mp4" type="video/mp4">
If you're seeing this, you're using an
outdated browser that doesn't support
the video tag. </video>

</body>
</html>
Bigger videos take longer to load. Consider reducing the length, height/width & frame rate to get the file size down.
Nancy O.

Adding MP4 video to a page created in DW CS5

I'm adding video for the first time and my initial attempt leaves a lot to be desired. I used the Insert Plugin to add the video, which is a full HD clip of about 150MB. It opens fine in IE, although it takes it awhile to load. I don't know what plugin to specify so it'll load up in any Mozilla session? Since it will take time to load, any suggestion about adding some "progress" bar would be appreciated- I guess with the right plugin that should be included?
The page I'm working on is here:
http://losangelesbillsbackers.com/video
Thanks

The problem with plugins is not everybody has QuickTime player or browser add-ons required to play the media. And there's little chance that visitors will download and install required apps just for your site.
The modern approach is HTML5 <video> with MP4, OGG and WEBM files to support all modern browsers and mobile devices.
Below is the HTML5 code:
<!doctype html>
<html>
<head>
<meta charset="utf-8">
<title>HTML5 with Video</title>


</head>
<style>
video {
    max-width:100%;
    display:block;
    margin:0 auto;
</style>
<body>
<h2>Use 3 File Types to support all browsers & mobile devices: MP4, WEBM and OGV.</h2>
<h3>Online Video Converter
http://video.online-convert.com/</h3>

<video controls poster="Your_poster_image.jpg">

<source src="http://techslides.com/demos/sample-videos/small.webm" type="video/webm">
<source src="http://techslides.com/demos/sample-videos/small.ogv" type="video/ogg">
<source src="http://techslides.com/demos/sample-videos/small.mp4" type="video/mp4">
If you're seeing this, you're using an
outdated browser that doesn't support
the video tag. </video>

</body>
</html>
Bigger videos take longer to load. Consider reducing the length, height/width & frame rate to get the file size down.
Nancy O.

Adding a video from vimeo

Is there anyway of adding or embedding a vimeo video in an email?

Sorry, you can't do that. However, from the vimeo web site FAQ:
You can share a video with anyone, even people who are not members of Vimeo. Move your mouse over the video window. This will bring up the video controls. Click the 'Share' button. Now you can enter email addresses for non-members or Vimeo members' user names. Add a personal message if you'd like, then click the 'share' button. They will receive an email with a link to your video. That's it!
Aside from this being your only option for now (and the best one), embedding video in email is problematic from the standpoint of it taking up all your resources when it tries to play it from Mail; that's not what Mail was designed for.

Adding a video into Dreamweaver cs4

How do you add a video to your site
I really need help i cant find a video for it on youtube.
Thanks for help

Add your video to YouTube and paste the embed code into your site where you want the video to be.
If that's not what you want then you have to put a little effort into your posts to let others know exactly what you're trying to do because we're not mind readers. There are several different ways of adding video to your site depending on the format. Usually doing a google search will find the code you're looking for. For instance googling the term insert (your video format here) video will most likely query a first page hit containing instructions and code for how to add your video to a website.

HP Pavilion 500-314: big problems adding external video card

Looking for some help.
I recently purchased an HP Pavilion 500-314. Specs are as follows:
http://h10025.www1.hp.com/ewfrf/wc/document?docname=c04293928&tmp_task=prodinfoCategory&cc=us&dlc=en...
The unit includes integrated Radeon R7 graphics, and comes with a 300w power supply
I purchased this unit in large part because it explicitly states that "Supports PCI Express x16 graphics cards". I run a quad-monitor setup for my work, and have traditionally done this using an ATI Firepro 2450 card.
I have now tried three different external graphics cards, and can get none of them to work:
First attempt was with a VisionTec Radeon HD 5570 (item #900345). This card supports quad monitor setup, and requires a minimum 250w power supply. When I installed the card, the HP Pavilion repeatedly beeped a series of 4 or 5 (can't remember which) beeps, but refused to send an image to any video output (either onboard or the new card).
Next attempt was with an EVGA GeForce GT 610. This is a dual monitor setup, and requires a minimum 300w power supply. Got the same exact response as with the VisionTec (i.e. series of beeps...computer would not fire any monitors up).
So with both of these (new) cards, I basically gave up immediately as I couldn't even get into BIOS (b/c no monitors would work) to see what was going on. My understanding is that the series of 4-5 beeps usually means that there is a graphics card issue, or that the card that has been added doesn't have sufficient power. This is frustrating, as the HP Pavilion 500-314 supposedly has a 300w power supply, which is at least equal to the min required for each of these cards.
At this point, I pulled the ATI Firepro 2450 out of my old machine and tried it. This card at least didn't cause the series of 4-5 beeps. Windows booted. However, once I log in, Windows tries to install the new (FirePro card) repeatedly, so the screen just flashes and flashes and flashes. I then went into BIOS. The BIOS indicates that the system is recognizing the card, and that the onboard video has been disabled. However, there is still a signal coming out of the onboard video output (DVI), so it is not in fact actually disabled. My sense is that Windows is trying to control two separate video cards (onboard + external), which is what is causing the problems. I can disable the FirePro video card from w/in Windows (using Safe Mode), and leave the card installed, and things work fine. However, as soon as I try and enable the card I get the endless cycle of flashing monitors again.
I have spent a couple of long sessions with HP tech support and they have been useless. They claim that this isn't an HP issue since the onboard video works fine. I find this response extremely frustrating. I think this is an HP issue, since the BIOS doesn't seem to be properly disabling the onboard video. Not to mention that the PC can't seem to interface properly with Windows 8 compatible PCI-E cards that explicitly claim to require less power than this unit has.
I am generally pretty computer savvy, but have reached my wits end on this one. I would appreciate any help anybody could provide. I have tried all kinds of combinations of variables (i.e. enabling onboard video, setting external card to primary, etc.) through BIOS, as well as combinations from w/in Windows disabling onboard video, but nothing seems to work.
VisionTek 900345 Radeon HD 5570 1GB DDR3 PCI Express 2.0 x16
This question was solved.
View Solution.

lordmonk3y,
Both the ATI Firepro 2450 (which never worked properly, but the system did recognize and was able to boot with when installed) and the GeForce GT 610 claim to draw right around 30w peak (closer to 20w average). Both are considered to be relatively low-draw graphics cards, and neither is a standout performer. My work requires a lot of available screen space, but not a lot of graphics horsepower. I don't do any gaming. For heavier hitting graphics cards you might want to consider a bigger power supply. Based on most of what I looked at, 300w is the bare minimum for a lot of these cards, and many of them require a larger power supply.
For what it's worth, I looked at the specs listed on the side of the PS in the 500-314, and it actually claims peak power of 300w, but only 250w at higher operating temperatures. It's kind of a catch-22, because if you're running a more powerful card it's sure to generate more heat inside the tower, thereby lowering the available power from the PS.
I did notice that there's one other nice thing about using an external card. The onboard Radeon R7 grabbed 1GB of the stated 8GB system memory for itself, thereby leaving only 7GB free for system use. Now that I'm using an external card, I get the whole 8GB available for system use.

Adding a video file to webpage

Hi all, me again, the not a beginner but not an expert (yet!). Another quick question:
I am working with a client that wants a video on his homepage. He is editing an existing video and will provide me the final file. I need to know:
1. what format to ask for (.mov? .swf? other?) {I am a beginner level in Flash.}
2. how I will add to the webpage (is is a simple matter of adding file just like I would add an image?)
3. what size/dimensions to ask for (here is the video that client is editing with his info: http://us.repstars.com/success/products, I cannot tell what the exact dimensions are/I have left about 475 x 290 in me page layout. Here is my rough layout where I will insert new video: http://hungry4web.net/zac_test/)
I am working in CS3 Dreamweaver, Mac.
Thanks!

1. what format to ask for (.mov? .swf? other?) {I am a beginner level in Flash.}
Doesn't really matter - Flash can manage all of them.
2. how I will add to the webpage (is is a simple matter of adding file just like I would add an image?)
INSERT | Media > SWF / Flash Video
3. what size/dimensions to ask for (here is the video that client is editing with his info: http://us.repstars.com/success/products, I cannot tell what the exact dimensions are/I have left about 475 x 290 in me page layout. Here is my rough layout where I will insert new video: http://hungry4web.net/zac_test/)
Ask for something that will fit the available space.

Trouble adding flash video

I am following the directions in Dreamweaver CS3 The Missing Manual for adding a flash video to my webpage. I did the following:
Insert>Media>Flash Video
Selected Progressive Download from the Video Type box,
Browsed and selected my video ("newsmakers.flv)
Used the default skin
Clicked the detect size button and checked the auto play and auto rewind boxes.
Clicked ok.
Then an error message comes up......(see attached screen print)
"Making this change would require changing code that is locked by a template or translator. The change will be discarded."
The only choice I have is to say ok. I am not sure what to do. I don't know what this will do. The book does not address this error.
The entire site is built on a template if that is any help.

The problem has to do with your editable regions in your template source code. If you go to the source code of your template look at the code between <head> and </head> If you do not have an editable region there then you will need to add one in the code view. This is because when you edit a page based on that template DW will fail to add the code because it needs to add header code in addition to the code it inserts at the point of where you want the video to appear on the page. So if both editable regions do not exist DW cannot continue.

Adding Flash Video to web page

Hi Everyone,
I have a web page that I have added a flash video to using
the insert flash video option in Dreamweaver. I uploaded all the
files including the additional files that are created when you use
that option and when I try to get to the video file once I have
uploaded it will not play. If I use a link directly to the .swf
then it will play but the link to the page where the video is
inserted just shows a blank page. Can anyone give me any guidance
on how I can get this to work.
P.S. If I preview it from my desktop before uploading to the
website it works fine.
Thanks,
Robert

Upload the Scripts folder to server.
--Nancy O.
Alt-Web Design & Publishing
www.alt-web.com
"ryonker" <[email protected]> wrote in
message
news:g2mpvv$3j3$[email protected]..
> Hi Everyone,
>
> I have a web page that I have added a flash video to
using the insert
flash
> video option in Dreamweaver. I uploaded all the files
including the
additional
> files that are created when you use that option and when
I try to get to
the
> video file once I have uploaded it will not play. If I
use a link directly
to
> the .swf then it will play but the link to the page
where the video is
inserted
> just shows a blank page. Can anyone give me any guidance
on how I can get
this
> to work.
> P.S. If I preview it from my desktop before uploading to
the website it
works
> fine.
>
> Thanks,
> Robert
>

Photo stream doesn't show added photos/videos?

Hello,
My wife made a shared photo stream, and I added some photos and videos to it, from my phone.
On the phone, it works. But if I try to go to the stream on iPhoto (Mountain Lion), it only shows her photos. Do I need Mavericks for it to show my photos too?
Thanks
Bob

Mac software - OS -- Not IOS
What version of iPhoto and of the OS do each of you have on your Macs?
LN

Adding flip4mac video

Similar Messages

Maybe you are looking for