Adding font for 9.0.4

I'm trying to add a font to a mac version 9.0.4. I've tried multipe ways of installing the font. I've placed the font in the fonts folder, placed the font in the system folder and the mac doesn't recognize it as a font. Its a post script font that should work on this verions of the mac. Can anyone think of something that i am overlooking? The font name is Din Schriften

Hi, pcguy2 -
Welcome to Apple's Discussions.
A postscript font for Mac OS 9 and earlier comes in two parts - a postcript file, also referred to as a printer font; and a suitcase, which contains at least one bit mapped font file (usually several are included). Both of those items, the postscript file and the suitcase, must be placed in the Fonts folder in System Folder; both must be loose, not contained inside any additional folder.
Article #11909 - Fonts: Bitmap, PostScript, and TrueType Compared
In addition the postscript font file's name must not be altered. It is linked to the bitmapped file it supports by its name. The name of a suitcase can be changed without affecting the usability of the fonts it contains.
More importantly, perhaps, is that the postscript font (any font, for that matter), must be specifically a Mac type font, in a format suitable for use with OS 9 - a font copied from OSX or a PC will usually not work.

Similar Messages

Adding Fonts for use in FCP

I was wondering how to add fonts to Final Cut Pro. I found one that seems to go in the "Font Book" folder of Tiger, but can't see it in FCP. Any suggestions?

Hi David, you mention that not all fonts work in FCP. Are the ones that work/don't work documented anywhere? Do you happen to know whether Helvetica Neue is one that will not work? I have a client who requires that font but it comes up looking italicized in FCP even though the control window says Plain.
The font shows up okay in other applications. I was worried that this FCP file might have been corrupted but the font behaves the same way even in a new file, and even on another computer.
I have a Genius Bar appt this coming Sunday but maybe you can save me a trip. Thanks!

Problem with adding Fonts using SE73

I have a requirement to add new fonts to use in PDF printing.
1) I have tried to add an MICR font using SE73 and I got the following message.
Error
Licensing: True Type Font must not be embedded.
Question: Is there any restriction on type of fonts that can be added to SAP?
2) I have tried a different font and added it successfully but I dont see the font in Font palette in PDF Layout.
Question: Is there any additional configuration to be done for the font to be visible in PDF - Font palette?
Please help.
Thank you,
Vasu

Hi,
Go to Character formate in your form.
create a new char formate with enable BAR code AND
you can give its type too.
To Create a Bar code prefix:
1) Go to T-code - SPAD -> Full Administration -> Click on Device Type -> Double click the device for which you wish to create the print control -> Click on Print Control tab ->Click on change mode -> Click the plus sign to add a row or prefix say SBP99 (Prefix must start with SBP) -> save you changes , it will ask for request -> create request and save
2) Now when you go to SE73 if you enter SBP00 for you device it will add the newly created Prefix
Create a character format C1.Assign a barcode to the character format.Check the check box for the barcode.
The place where you are using the field value use like this
<C1> &itab-field& </C1>.
You will get the field value in the form of barcode.
Which barcode printer are you using ? Can you download this file and see.
http://www.servopack.de/Files/HB/ZPLcommands.pdf.
It will give an idea about barcode commands.
Check this link:
http://www.sap-img.com/abap/questions-about-bar-code-printing-in-sap.htm
Check this link:
http://help.sap.com/saphelp_nw04/helpdata/en/d9/4a94c851ea11d189570000e829fbbd/content.htm
Hope this link ll be useful..
http://help.sap.com/saphelp_nw04/helpdata/en/66/1b45c136639542a83663072a74a21c/content.htm
go through these links and cose u r previous threads,
http://www.sap-img.com/abap/questions-about-bar-code-printing-in-sap.htm
smartform - barcode
http://www.erpgenie.com/abap/smartforms.htm
http://sap.ittoolbox.com/groups/technical-functional/sap-basis/print-barcode-with-smartform-634396
http://sap.ittoolbox.com/groups/technical-functional/sap-dev/printing-barcode-733550
Detailed information about SAP Barcodes
A barcode solution consists of the following:
a barcode printer
a barcode reader
a mobile data collection application/program
A barcode label is a special symbology to represent human readable information such as a material number or batch number
in machine readable format.
There are different symbologies for different applications and different industries. Luckily, you need not worry to much about that as the logistics supply chain has mostly standardized on 3 of 9 and 128 barcode symbologies - which all barcode readers support and which SAP support natively in it's printing protocols.
You can print barcodes from SAP by modifying an existing output form.
Behind every output form is a print program that collects all the data and then pass it to the form. The form contains the layout as well as the font, line and paragraph formats. These forms are designed using SAPScript (a very easy but frustratingly simplistic form format language) or SmartForms that is more of a graphical form design tool.
Barcodes are nothing more than a font definition and is part of the style sheet associated with a particular SAPScript form. The most important aspect is to place a parameter in the line of the form that points to the data element that you want to represent as barcode on the form, i.e. material number. Next you need to set the font for that parameter value to one of the supported barcode symbologies.

How to set different font for numbers in headings and TOCs

Hi,
I've noticed some people use a different font for numbers in headings and TOCs to get some extra magic. Is there any way to automate such use of fonts in the paragraph styles?
Oh, and any suggestions on what fonts would be good for numbers?
Thanks!

I was merely continuing on the original theme -- any digit in any character style. It was only later revealed that (a) the OP needed old style figures, and (b) those were available in his font from the start.
The negative lookahead is the answer to his question (copied in full now)
Based on the above InDesignSecrets tutorial, does anyone know what to do if some of the numbers end with a dot or a comma?
Like the Norwegian date format: 13. mai 2009
Or the Norwegian way of pricing items: 2900,-
and my example shows it can be done, but with an added caveat. If digits are to be set in red, using the exceptions the OP asks for, my example sentence will come out as
"Think of a number between 1 to 10, but don't use 9."
rather than the (here) intended
"Think of a number between 1 to 10, but don't use 9."

Add font for virtualized Office 2013

Hi,
I need to add a font for Office 2013.
Usually, a font should be added to Windows\Fonts. I believe it should work for virtual Apps too?
Can we do it on package level?
Thanks.
--- When you hit a wrong note its the next note that makes it good or bad. --- Miles Davis

Generally you can add fonts to app-v packages.
Tim Mangan did some research on the pulishing performance of that and also documents some background information: http://www.tmurgent.com/appv/index.php/resources/research/293-deploymentperformance
However: As the Office 2013 App-V package can't be modified with the Sequencer, you'd have to find other methods. One would be to copy/install the Font inside the virtual package using a DeploymentConfig, or you install the Font locally - maybe also using
the DeploymentConfig.
Falko
Twitter
@kirk_tn   |   Blog
kirxblog   |   Web
kirx.org   |   Fireside
appvbook.com

[svn:fx-trunk] 12944: Added support for state specific sccessible names in ToggleButtonAccImpl

Revision: 12944
Revision: 12944
Author:   [email protected]
Date:     2009-12-14 21:36:44 -0800 (Mon, 14 Dec 2009)
Log Message:
Added support for state specific sccessible names in ToggleButtonAccImpl
QE notes: none
Doc notes: none
Bugs: n/a
Reviewer: Gordon
Tests run: checkintests
Is noteworthy for integration: no
Modified Paths:
    flex/sdk/trunk/frameworks/projects/spark/src/spark/accessibility/ToggleButtonAccImpl.as

Sorry about that. I am not exactly sure where the problem is, but I know it takes place after I put the <nav> in (in the html portion). If I understand what I am learning, the CSS at the top will structure my html code so I would have thought the CSS tageting my nav would be the focus. Maybe it is a different section though.
CSS part:
nav p {
font-size: 90%;
color: #FFC;
text-align: right;
font-weight: bold;
background-color: #090;
padding-top: 5px;
padding-right: 20px;
padding-bottom: 5px;
border-top-width: 2px;
border-top-style: solid;
border-top-color: #060;
HTML part: (bold italic is the part I added)
<body>
<div class="container">
<div id="apDiv1"><img src="Lessons/images/butterfly-ovr.png" width="170" height="158" alt="GreenStart Logo"></div>
<header></header>
<nav>
    <p>Home | About Us | Contact Us</p>
</nav>
<div class="sidebar1">
    <ul class="nav">
      <li><a href="#">Green News</a></li>
      <li><a href="#">Green Products</a></li>
      <li><a href="#">Green Events</a></li>
      <li><a href="#">Green Travel</a></li>
      <li><a href="#">Green Tips</a></li>
    </ul>

TTF Font for Unix Server?

Hi,
Does all TTF fonts works in Unix environment for the Font Subseting of Oracle PDF Reports?
Thanks.

Absolutely. It's just that you'd probably using a different font (Type1 font) for formatting your report. However, you can still subset a TTF. Ensure that you have an appropriate entry in uifont.ali plus the .TTF file's path is added to REPORTS_PATH.
With latest Solaris version you may also install TTF and use it in your applications.
Regards
Sripathy

Xserver-pl-fonts pkgbuild. iso8859-2 pcf and bdf fonts for X

These are bitmap x-server fonts (aka biznet fonts). They include aliases for standard x-server fonts (though they do not replace them) so you should see special iso8859-2 characters without doing anything else.
xserver-pl-fonts PKGBUILD
pkgname=xserver-pl-fonts
pkgver=1.0
pkgrel=1
pkgdesc="ISO 8859-2 (Central European) bdf and pcf fonts for x-server"
url="http://www.biz.net.pl/iso/x-fonts/index.html"
depends=('x-server')
install=xserver-pl-fonts.install
source=('http://www.biz.net.pl/images/ISO8859-2-bdf.tar.gz'
'http://www.biz.net.pl/images/ISO8859-2-pcf.tar.gz')
md5sums=('5dd69ab949d833944048b10a97f7a589'
'9274f1730275c6d3ba30414a431ca59a')
build() {
install -d -m755
$startdir/pkg/usr/X11R6/lib/X11/fonts/latin2/100dpi
install -d -m755
$startdir/pkg/usr/X11R6/lib/X11/fonts/latin2/75dpi
install -d -m755
$startdir/pkg/usr/X11R6/lib/X11/fonts/latin2/misc
install -m644 $startdir/src/100dpi/*
$startdir/pkg/usr/X11R6/lib/X11/fonts/latin2/100dpi
install -m644 $startdir/src/75dpi/*
$startdir/pkg/usr/X11R6/lib/X11/fonts/latin2/75dpi
install -m644 $startdir/src/misc/*
$startdir/pkg/usr/X11R6/lib/X11/fonts/latin2/misc
xserver-pl-fonts.install
# arg 1: the new package version
post_install() {
echo "------------------------------------"
echo "Add the following font paths to your"
echo "/etc/X11/xorg.conf or /etc/X11/XF86Config"
echo ""
echo "/usr/X11R6/lib/X11/fonts/latin2/100dpi"
echo "/usr/X11R6/lib/X11/fonts/latin2/75dpi"
echo "/usr/X11R6/lib/X11/fonts/latin2/misc"
echo ""
echo "Rebuilding font cache..."
/usr/bin/fc-cache
echo "...done."
# arg 1: the new package version
# arg 2: the old package version
post_upgrade() {
echo "------------------------------------"
echo "Make sure you have the following font paths in your"
echo "/etc/X11/xorg.conf or /etc/X11/XF86Config"
echo ""
echo "/usr/X11R6/lib/X11/fonts/latin2/100dpi"
echo "/usr/X11R6/lib/X11/fonts/latin2/75dpi"
echo "/usr/X11R6/lib/X11/fonts/latin2/misc"
echo ""
echo "Rebuilding font cache..."
/usr/bin/fc-cache
echo "...done."
# arg 1: the old package version
pre_remove() {
/bin/true
# arg 1: the old package version
post_remove() {
echo "------------------------------------"
echo "You can delete the following font paths from your"
echo "/etc/X11/xorg.conf or /etc/X11/XF86Config"
echo ""
echo "/usr/X11R6/lib/X11/fonts/latin2/100dpi"
echo "/usr/X11R6/lib/X11/fonts/latin2/75dpi"
echo "/usr/X11R6/lib/X11/fonts/latin2/misc"
echo ""
echo "Rebuilding font cache..."
/usr/bin/fc-cache
echo "...done."
op=$1
shift
$op $*

Added to my TUR. Thanks for another quality package, lanrat!

What is supposed to happen if the font for a control on the startup form does not exist on the system?

Say you put a button on a form and dont change the font ie ms san serif, then the app is installed on a system that does not have the font ms san serif installed. Is it supposed to throw an error when the form initializes? Since this happens before any user
code the error can go untrapped in the start up form and crashes to the system.
I discovered it does this if you specify the font in the designer to be "Arial Narrow" and it is not installed. But whats funny is the error is not font does not exist, it is "Arial Narrow" does not support style Regular. Even though
I set the font in the IDE for the control. How can I be setting it with the IDE to something that does not exist for the font I set (Arial Narrow is on the IDE system)?
I have always thought that vb would just use a different font if the control font did not exist without an error. In my case it was a secondary form so the error was trapped. But, I don't see how to trap the error if it is the startup form.

PS
"I meant that you should set the buttons font to something like
MS Sans Serif "
What if ms sans is not on the system? Then you cant do anything.
Maybe I am being picky but just sayin...
I don't suppose you're being picky specifically although I think I got a headache attempting to do the below.
I do think this is a bug though which you should probably report.
However I tried this and it worked fine. Except I had to alter the Form1.Designer.vb file to do this. I tested this. I didn't test without this to see if I would get the exception you received.
I downloaded a Font called Kingsthings Christmas from the second link in my post for links to download fonts. Added that to my systems Fonts and tested the code. Removed that from my systems fonts and tested the code. It worked in both instances.
I suspect that the Font in the Form1.Designer.VB file for the New Font for the TabControl and TreeView would work with the default system font set to use 21.75! and font style regular but if the default system font didn't support both of those then an issue
could occur obviously. So if somebody used Control Panel to set the default system font to something that doesn't support those two things then you will need to alter the code to detect what the default system font can use for those two settings
possibly.
Form1's code
Option Strict On
Imports System.Drawing.Text
Public Class Form1
Private Sub Form1_Load(sender As Object, e As EventArgs) Handles MyBase.Load
Me.Location = New Point(CInt((Screen.PrimaryScreen.WorkingArea.Width / 2) - (Me.Width / 2)), CInt((Screen.PrimaryScreen.WorkingArea.Height / 2) - (Me.Height / 2)))
TreeView1.BeginUpdate()
TreeView1.Nodes.Add("Parent")
TreeView1.Nodes(0).Nodes.Add("Child 1")
TreeView1.Nodes(0).Nodes.Add("Child 2")
TreeView1.Nodes(0).Nodes(1).Nodes.Add("Grandchild")
TreeView1.Nodes(0).Nodes(1).Nodes(0).Nodes.Add("Great Grandchild")
TreeView1.EndUpdate()
For Each f As FontFamily In New InstalledFontCollection().Families
RichTextBox1.AppendText(f.Name.ToString & vbCrLf)
Next
End Sub
End Class
Form1.Designer.VB files code which you're not supposed to alter of course.
Option Strict On
Imports System.Drawing.Text
<Global.Microsoft.VisualBasic.CompilerServices.DesignerGenerated()> _
Partial Class Form1
Inherits System.Windows.Forms.Form
'Form overrides dispose to clean up the component list.
<System.Diagnostics.DebuggerNonUserCode()> _
Protected Overrides Sub Dispose(ByVal disposing As Boolean)
Try
If disposing AndAlso components IsNot Nothing Then
components.Dispose()
End If
Finally
MyBase.Dispose(disposing)
End Try
End Sub
'Required by the Windows Form Designer
Private components As System.ComponentModel.IContainer
'NOTE: The following procedure is required by the Windows Form Designer
'It can be modified using the Windows Form Designer.
'Do not modify it using the code editor.
Dim FontToUse As Font
<System.Diagnostics.DebuggerStepThrough()> _
Private Sub InitializeComponent()
For Each f As FontFamily In New InstalledFontCollection().Families
If f.Name.ToString = "Kingthings Christmas 2" Then
FontToUse = New Font(f.Name.ToString, 24)
Exit For
Else
FontToUse = New Font(SystemFonts.DefaultFont.FontFamily.Name.ToString, 24)
End If
Next
Me.TabControl1 = New System.Windows.Forms.TabControl()
Me.TabPage1 = New System.Windows.Forms.TabPage()
Me.TabPage2 = New System.Windows.Forms.TabPage()
Me.TabPage3 = New System.Windows.Forms.TabPage()
Me.TabPage4 = New System.Windows.Forms.TabPage()
Me.TabPage5 = New System.Windows.Forms.TabPage()
Me.TreeView1 = New System.Windows.Forms.TreeView()
Me.RichTextBox1 = New System.Windows.Forms.RichTextBox()
Me.TabControl1.SuspendLayout()
Me.SuspendLayout()
'TabControl1
Me.TabControl1.Controls.Add(Me.TabPage1)
Me.TabControl1.Controls.Add(Me.TabPage2)
Me.TabControl1.Controls.Add(Me.TabPage3)
Me.TabControl1.Controls.Add(Me.TabPage4)
Me.TabControl1.Controls.Add(Me.TabPage5)
Me.TabControl1.Font = New System.Drawing.Font(FontToUse.FontFamily.Name.ToString, 21.75!, System.Drawing.FontStyle.Regular, System.Drawing.GraphicsUnit.Point, CType(0, Byte))
Me.TabControl1.Location = New System.Drawing.Point(6, 32)
Me.TabControl1.Name = "TabControl1"
Me.TabControl1.SelectedIndex = 0
Me.TabControl1.Size = New System.Drawing.Size(600, 183)
Me.TabControl1.TabIndex = 0
'TabPage1
Me.TabPage1.Location = New System.Drawing.Point(4, 43)
Me.TabPage1.Name = "TabPage1"
Me.TabPage1.Padding = New System.Windows.Forms.Padding(3)
Me.TabPage1.Size = New System.Drawing.Size(592, 136)
Me.TabPage1.TabIndex = 0
Me.TabPage1.Text = "TabPage1"
Me.TabPage1.UseVisualStyleBackColor = True
'TabPage2
Me.TabPage2.Location = New System.Drawing.Point(4, 43)
Me.TabPage2.Name = "TabPage2"
Me.TabPage2.Padding = New System.Windows.Forms.Padding(3)
Me.TabPage2.Size = New System.Drawing.Size(592, 136)
Me.TabPage2.TabIndex = 1
Me.TabPage2.Text = "TabPage2"
Me.TabPage2.UseVisualStyleBackColor = True
'TabPage3
Me.TabPage3.Location = New System.Drawing.Point(4, 43)
Me.TabPage3.Name = "TabPage3"
Me.TabPage3.Padding = New System.Windows.Forms.Padding(3)
Me.TabPage3.Size = New System.Drawing.Size(592, 136)
Me.TabPage3.TabIndex = 2
Me.TabPage3.Text = "TabPage3"
Me.TabPage3.UseVisualStyleBackColor = True
'TabPage4
Me.TabPage4.Location = New System.Drawing.Point(4, 43)
Me.TabPage4.Name = "TabPage4"
Me.TabPage4.Padding = New System.Windows.Forms.Padding(3)
Me.TabPage4.Size = New System.Drawing.Size(592, 136)
Me.TabPage4.TabIndex = 3
Me.TabPage4.Text = "TabPage4"
Me.TabPage4.UseVisualStyleBackColor = True
'TabPage5
Me.TabPage5.Location = New System.Drawing.Point(4, 43)
Me.TabPage5.Name = "TabPage5"
Me.TabPage5.Padding = New System.Windows.Forms.Padding(3)
Me.TabPage5.Size = New System.Drawing.Size(592, 136)
Me.TabPage5.TabIndex = 4
Me.TabPage5.Text = "TabPage5"
Me.TabPage5.UseVisualStyleBackColor = True
'TreeView1
Me.TreeView1.Font = New System.Drawing.Font(FontToUse.FontFamily.Name.ToString, 21.75!, System.Drawing.FontStyle.Regular, System.Drawing.GraphicsUnit.Point, CType(0, Byte))
Me.TreeView1.Location = New System.Drawing.Point(9, 229)
Me.TreeView1.Name = "TreeView1"
Me.TreeView1.Size = New System.Drawing.Size(704, 235)
Me.TreeView1.TabIndex = 1
'RichTextBox1
Me.RichTextBox1.Location = New System.Drawing.Point(9, 475)
Me.RichTextBox1.Name = "RichTextBox1"
Me.RichTextBox1.Size = New System.Drawing.Size(702, 124)
Me.RichTextBox1.TabIndex = 2
Me.RichTextBox1.Text = ""
'Form1
Me.AutoScaleDimensions = New System.Drawing.SizeF(6.0!, 13.0!)
Me.AutoScaleMode = System.Windows.Forms.AutoScaleMode.Font
Me.ClientSize = New System.Drawing.Size(720, 606)
Me.Controls.Add(Me.RichTextBox1)
Me.Controls.Add(Me.TreeView1)
Me.Controls.Add(Me.TabControl1)
Me.Name = "Form1"
Me.Text = "Form1"
Me.TabControl1.ResumeLayout(False)
Me.ResumeLayout(False)
End Sub
Friend WithEvents TabControl1 As System.Windows.Forms.TabControl
Friend WithEvents TabPage1 As System.Windows.Forms.TabPage
Friend WithEvents TabPage2 As System.Windows.Forms.TabPage
Friend WithEvents TabPage3 As System.Windows.Forms.TabPage
Friend WithEvents TabPage4 As System.Windows.Forms.TabPage
Friend WithEvents TabPage5 As System.Windows.Forms.TabPage
Friend WithEvents TreeView1 As System.Windows.Forms.TreeView
Friend WithEvents RichTextBox1 As System.Windows.Forms.RichTextBox
End Class
La vida loca

Adding font to flash text

Hi
I have searched everywhere but I only get results for adding
general font to Dreamweaver's font list
What I am trying to do in fact is add a font so I can see it
when I make a flash text buton, but the font is not showing up in
there
How do I add a font to this please? Are there any limitations
on adding fonts here?
Please help
Thank very much in advance

Oops - the stylesheet embedding should be: b)....
Murray --- ICQ 71997575
Adobe Community Expert
(If you *MUST* email me, don't LAUGH when you do so!)
==================
http://www.dreamweavermx-templates.com
- Template Triage!
http://www.projectseven.com/go
- DW FAQs, Tutorials & Resources
http://www.dwfaq.com - DW FAQs,
Tutorials & Resources
http://www.macromedia.com/support/search/
- Macromedia (MM) Technotes
==================
"Murray *ACE*" <[email protected]> wrote
in message
news:f7gu3d$295$[email protected]..
> That's a more complex thing.
>
> I do it by a) giving each link for which I want this
effect a unique ID,
> e.g.,
>
> <a href="whatever.html" id="button1"....
> <a href="whatever-else.html" id="button2"...
>
> and then embedding a small stylesheet in the head of
each page that
> explicitly sets the appearance of only that link -
>
> <style type="text/css">
> <!--
> a#button2 { color:orange; }
>
> --
> Murray --- ICQ 71997575
> Adobe Community Expert
> (If you *MUST* email me, don't LAUGH when you do so!)
> ==================
>
http://www.dreamweavermx-templates.com
- Template Triage!
>
http://www.projectseven.com/go
- DW FAQs, Tutorials & Resources
>
http://www.dwfaq.com - DW FAQs,
Tutorials & Resources
>
http://www.macromedia.com/support/search/
- Macromedia (MM) Technotes
> ==================
>
>
> "bossent20" <[email protected]> wrote
in message
> news:f7gn4b$np1$[email protected]..
>> thanks for your help
>>
>> now i understand what active is used for
>>
>> but when i once did select visited as black, it
makes all visited ones
>> (i.e
>> history of visited links) stay black
>>
>> and will only turn to their original colour again
once I clear my
>> internet
>> history files
>>
>> what i want to do though, is just make all links
grey and when you click
>> on it
>> it goes black to show the visitor which page they
are on
>>
>> thanks very much for your time btw - do appreciate
it
>>
>

If I use a web font in my website can I use the same font for printed materials such as business car

I am a graphic designer intending to design a portfolio website in Adobe Muse. I plan to use TypeKit web fonts to design my website. Upon completioin of the website I intend to design business cards and my resume to match the look of my website. I would like to use the same fonts as I used on the website. Is it possible to use web fonts for printing purposes? If not, what do people typically do in this situation. The last thing I want to do is use a font that "looks" like the ones used on my website.

Hi redsoxfan15b,
(I think I may have replied to your Typekit Support ticket earlier today, but I will post the same information here to be certain.)
We have recently added a new feature to Typekit that allows you to sync fonts to your desktop and use them in print design. The announcement on our website has more information:
http://blog.typekit.com/2014/01/16/the-fonts-you-love-from-typekit-now-on-your-desktop/
Font sync is available on any Typekit Portfolio, Performance, or Business plan. Here is a list of all the font available for desktop use:
https://typekit.com/fonts?licenses=desktop
We are continuing to license more of the library for desktop use, but for now you should confirm that the font you would like to use it available for both web and desktop. And if there is a font you'd like to use that isn't available for desktop sync, you may also be able to purchase a license directly from the foundry.
I hope that this helps; let me know if you have any other questions! Best,
-- liz

Using font for design

Mr. Dov Isaacs and other crew,
Thank you all for so simple answers on forum, you are the best because something complicated you answer on a simple way, but I have one more question. As you said buying licence means that we are able to use font for design, print, etc. but if we are designing let say watermark for photo, because I am hobby photographer, not selling anything but like to design watermarks for my photos. Is it ok to add or attach ornament to letter, let say if I am using letter M inside some font is it ok if I attach flower to left leg of M, or ornament or anything, not changing software or anything else just adding something that is representing things that I do?

I did reply to your private message. Repeating my response for others to see …
What you can do with a particular font depends upon the font and whom you license the font from. For fonts you license from Adobe, you may make any modifications or augmentations you want, either to the font itself, its outlines (assuming let's say you “outline” some text) or rasters. The restriction is that you may not redistribute such fonts to others, the visual results in your artwork or photos, yes, the fonts themselves, no.
Hopefully that makes some sense?
- Dov

Need help in finding a font for a logo

I was looking for help in finding a font for my logo. I'm not a designer at all, so I'm calling on all the fine designers and folks on the Adobe site to help me out. All replies are, of course, appreciated and any suggestions/comments/ideas will be welcome.
I'm designing a logo for my film company. I wanted to keep it simple but not boring either. I put together the first draft of the logo using Photoshop CS3 and used Trajan Pro for the film company words (Panthera Films) and used Futura for the slogan ("Inspiration through Imagination"). While I don't mind the fonts, it's simple but, alas, too boring. I love the panther image but need a dynamic font for "Panthera Films" and a complimenting font for the slogan.
Can anyone recommend a good combination of fonts to replace the Trajan Pro and Futura? As well, I want to give the logo a nice presence without it being too loud, bold or jumping off the page. As well, should the font for "Films" be the same as "Panthera" or can they be different?
The image I attached is something I was thinking to use as a banner on a website.
Any help would be appreciated too with this
TIA,
Dale

Dale,
As I said, I like it too.
You may consider making it a bit heavier, maybe bold, for readability at small sizes.
It is hard to recommend a specific font because it should represent your company and what it stands for. Have you tried typing the name in a word processing application (Worst or something better) and then running through all the font you have? If not, that might give you a few new thoughts about the overall kind of font you feel is the right one. And then it is much easier to recommend something.

I have problem with fonts for my site, i have used "Lucida sans unicode " family for certain texts. it shows perfect in mozilla 3.5 and mozilla 4. But the font not supporting in mozilla 5.0? please help me

i have problem with fonts for my site, i have used "Lucida sans unicode " family for certain texts. it shows perfect in mozilla 3.5 and mozilla 4. But the font not supporting in mozilla 5.0? please help me

i have problem with fonts for my site, i have used "Lucida sans unicode " family for certain texts. it shows perfect in mozilla 3.5 and mozilla 4. But the font not supporting in mozilla 5.0? please help me

Adding listeners for instances on other frames

I'm trying to create a very standard menu, the type where there are links on each page that links to each other. So far I've put each menu page on a separate frame (total around 35 frames), and each link as its own instance/class. Originally I planned to create an array containing all the links like this:
var menuLinks:Array =
                            //Main menu - frame 1
                            menuRightSide.newStoryLink,
                            menuRightSide.continueStoryLink,
                            menuRightSide.selectChapterLink,
                            menuRightSide.optionsLink,
                            menuRightSide.charactersLink,
                            menuRightSide.aboutLink,
                            //chapters menu - frame 2
                            menuRightSide.chapter1,
                            menuRightSide.chapter2,
                            menuRightSide.chapter3,
                            menuRightSide.chapter4,
                            menuRightSide.chapter5,
                            //characters - frame 3
                            menuRightSide.char1,
                            menuRightSide.char2,
                            menuRightSide.char3,
                            menuRightSide.char4,
                            menuRightSide.char5,
                            menuRightSide.char6,
                            //options - frame 4
                            menuRightSide.languageLink,
                            menuRightSide.costumeLink,
                            //function links - these exist on MULTIPLE frames/pages, eg options, characters, chapters all have backToMainLink
                            menuRightSide.backToMainLink,
                            menuRightSide.backToCharLink,
                            menuRightSide.backToOptionsLink,
                            menuRightSide.backToCostumeLink,
                            ]; //create array of links for menus
            currentPage = "main_menu";
            for each (var links:MovieClip in menuLinks)
                links.buttonMode = true; //set links to behave like button
                links.mouseChildren = false; //mouse over does not affect this instance's children
                links.addEventListener(MouseEvent.ROLL_OVER, onOver);
                links.addEventListener(MouseEvent.ROLL_OUT, onOut);
                links.addEventListener(MouseEvent.CLICK, onClick);
            function onOver(e:MouseEvent):void //apply glow to every link
                TweenMax.to(e.target, 1, {glowFilter:{color:0xFFFFFF, alpha:1, blurX:10, blurY:10}}); //glow effect
            function onOut(e:MouseEvent):void //remove glow on link on mouse out
                TweenMax.to(e.target, 1, {glowFilter:{color:0xFFFFFF, alpha:0, blurX:0, blurY:0, remove:true}}); //remove glow
            function onClick(e:MouseEvent):void
                currentPage = e.target.name;
                if (e.target.name == "newStoryLink") { //if click newStoryLink
                    delegate.beginStory();
                } else if (e.target.name == "optionsLink") { //if click optionsLink
                    TweenLite.to(menuRightSide, 0.2, {alpha:0, onComplete:menuRightSide.gotoAndStop, onCompleteParams:[45]}); //go to frame 45, options screen
                    TweenLite.to(menuRightSide, 0.2, {alpha:1, delay:0.2});
                } else if (e.target.name == "charactersLink") { //if click charactersLink
                    TweenLite.to(menuRightSide, 0.2, {alpha:0, onComplete:menuRightSide.gotoAndStop, onCompleteParams:[10]}); //go to frame 10, char screen
                    TweenLite.to(menuRightSide, 0.2, {alpha:1, delay:0.2});
                } else if (e.target.name == "aboutLink") { //if click aboutLink
                    TweenLite.to(menuRightSide, 0.2, {alpha:0, onComplete:menuRightSide.gotoAndStop, onCompleteParams:[180]}); //go to frame 180, about screen
                    TweenLite.to(menuRightSide, 0.2, {alpha:1, delay:0.2});
Basically adding listener for every link, then simply telling AS what to do when I click the link regardless of what page I'm currently on.
However the problem is I realized listeners can't be added for links that exist on other frames other than frame 1, because they're null I think until AS flips to that frame.
So does anyone have an idea on how I should code this? Another challenge is some links (the ones at the bottom of the array) exist on MULTIPLE frames, but perform the exact same thing regardless of which page it was clicked on.
Thanks.

I arranged them on separate frames because that way I know exactly what's on each page. If I simply list out all the links on one frame, then it gets extremely messy visually.
So if I want to add listeners on other frames, how would I do that? I know the pseudo-code:
on frame 1:
for (each link on frame 1) {
link.addEventListener()
on frame 2:
for (each link on frame 2) {
link.addEventListener()
... etc
function onClick(e:MouseEvent):void
                currentPage = e.target.name;
                if (e.target.name == "newStoryLink") {
                    delegate.beginStory();
                } else if (e.target.name == "continueStoryLink") {
                    //do something else

Adding font for 9.0.4

Similar Messages

Maybe you are looking for