Adding Footer to Large Adobe File (6,400 pages)

Adobe 9 does not have problesm adding a footer to a large document but Adobe X does. It just freezes on a 6,400 page document. Adobe X can do a 3,000 page document. Any ideas?

Then why -- when I do EXACTLY the same thing in either X or XI do I get a file that is only a few megabytes and works fine? In DC the same procedure produced a file that was almost a terabyte! Sorry, but something pretty basic has changed between XI and DC. Hope someone can pass this info to those who can do something.

Similar Messages

Large adobe files created

I use macros to create postscript files using a tektronix driver. Excel 2003 created small files, but since I have upgraded to 2007 the files are a lot larger (from 7mb to 77mb). Has anyone found a fix to this? Even when I convert an excel graph using adobe the file is a lot larger.

When I originally set up this macro, the adobe pdf driver would not create the file properly. I have since tried to use the adobe driver (when this issue came up), but it still gives too large a file even when I changed the settings to compress it.

How can I reprint a large # of files in adobe acrobat XI since there's no batch processing feature?

How can I reprint a large # of files in adobe acrobat XI since there's no batch processing feature?

One of the available commands in the Action Wizard is Print (under the More
Tools sub-section). You create a new Action, add that command and then run
it on your files to print them all.

I want to save large pdf files from my computer to my iPad so I can view them in Adobe Reader.

I want to save large pdf files from my computer to my iPad so I can view them in Adobe Reader. I do not want to view them in iBooks or Quickoffice. Since I cannot email these large files, how can I get them on my iPad? Thanks for your help.

I think that Adobe reader supports file sharing.
Connect the iPad to your computer and launch iTunes. Select the iPad on the left side under "devices". Click on the Apps Tab in the window on the right. Scroll down to the File Sharing Apps list under the main apps list. Click on Adobe Reader. Drag the documents into the file sharing window on the right or select them using the "add" button.
Launch the Adobe reader app and the files should be in there.

I am a new first time user of adobe to convert pdf. files to word, etc. I must add that I am 75 years old and not a computer literate fellow. I have a fairly large pdf file that I want to convert to word so I can cut ?

I am a new first time user of adobe to convert pdf. files to word, etc. I must add that I am 75 years old and not a computer literate fellow. I have a fairly large pdf file that I want to convert to word so I can cut & paste, etc ? Any & all help will be appreciated.

Haakwine you have posted to the Downloading, Installing, Setting Up forum. Which specific Adobe software or service are you trying to use to convert PDF files?

I can no longer use the links in an Adobe file to reach Sharepoint. %2520 is added to link

I use a PowerPoint file saved as Adobe for a visual front end for SharePoint files. With latest revisions of Adobe, I cannot link from the Adobe file to SharePoint.
Adobe adds %25 to the links. This started at the end of 2012. I have 400 users, I definitely need this fixed. I have a work around that is only ok and does not include the use of Adobe.
Many thanks,
Dr. Barbara Pemberton

That bug has been fixed in the latest Reader versions (10.1.7 and 11.0.3).

Problem adding large video files to library

When I try to add large video files to my library. It doesn't work. No error message or anything. It just doesn't happen. The file I'm trying right now is 2.65 GB. I've had no problem with video files around 400 MB.

What format is the video in? iTunes is unfortunately silent when you try to add a video or song that Quicktime can't decode.

HELP!! Very Large Spooling / File Size after Data Merge

My question is: If the image is the same and only the text is different why not use the same image over and over again?
Here is what happens...
Using CS3 and XP (P4 2.4Ghz, 1GB Ram, 256MB Video Card) I have taken a postcard pdf (the backside) placed it in a document, then I draw a text box. Then I select a data source and put the fields I wish to print (Name, address, zip, etc.) in the text box.
Now, under the Create Merged Document menu I select Multiple Records and then use the Multiple Records Layout tab to adjust the placement of this postcard on the page. I use the preview multiple records option to lay out 4 postcards on my page. Then I merge the document (it has 426 records).
Now that my merged document is created with four postcards per page and the mailing data on each card I go to print. When I print the file it spools up huge! The PDF I orginally placed in the document is 2.48 MB but when it spools I can only print 25 pages at a time and that still takes FOREVER. So again my question is... If the image is the same and only the text is different why not use the same image over and over again?
How can I prevent the gigantic spooling? I have tried putting the PDF on the master page and then using the document page to create the merged document and still the same result. I have also tried createing a merged document with just the addresses then adding the the pdf on the Master page afterward but again, huge filesize while spooling. Am I missing something? Any help is appreciated :)

The size of the EMF spool file may become very large when you print a document that contains lots of raster data
View products that this article applies to.
Article ID : 919543
Last Review : June 7, 2006
Revision : 2.0
On This Page
SYMPTOMS
CAUSE
RESOLUTION
STATUS
MORE INFORMATION
Steps to reproduce the problem
SYMPTOMS
When you print a document that contains lots of raster data, the size of the Enhanced Metafile (EMF) spool file may become very large. Files such as Adobe .pdf files or Microsoft Word .doc documents may contain lots of raster data. Adobe .pdf files and Word .doc documents that contain gradients are even more likely to contain lots of raster data.
Back to the top
CAUSE
This problem occurs because Graphics Device Interface (GDI) does not compress raster data when the GDI processes EMF spool files and generates EMF spool files.
This problem is very prominent with printers that support higher resolutions. The size of the raster data increases by four times if the dots-per-inch (dpi) in the file increases by two times. For example, a .pdf file of 1 megabyte (MB) may generate an EMF spool file of 500 MB. Therefore, you may notice that the printing process decreases in performance.
Back to the top
RESOLUTION
To resolve this problem, bypass EMF spooling. To do this, follow these steps:1. Open the properties dialog box for the printer.
2. Click the Advanced tab.
3. Click the Print directly to the printer option.
Note This will disable all print processor-based features such as the following features: N-up
Watermark
Booklet printing
Driver collation
Scale-to-fit
Back to the top
STATUS
Microsoft has confirmed that this is a problem in the Microsoft products that are listed in the "Applies to" section.
Back to the top
MORE INFORMATION
Steps to reproduce the problem
1. Open the properties dialog box for any inbox printer.
2. Click the Advanced tab.
3. Make sure that the Print directly to the printer option is not selected.
4. Click to select the Keep printed documents check box.
5. Print an Adobe .pdf document that contains many groups of raster data.
6. Check the size of the EMF spool file.

Bridge locks briefly when updating metadata on large PSD files

When updating metadata on a large PSD file, Bridge "locks" up for a brief period of time. This is apparently when it's rewriting that large PSD file to update the metadata. I'd like to be able to use Bridge in an uninterrupted fashion while metadata is updated in the background. This normally works for smaller files, just not on large PSD files. You can reproduce this easily by just adding a keyword to a couple 100MB PSD files.
--John

Chris,
How large are the PSD files? If they are over 400MB, I think I know what's wrong.
Bridge has a file-size preference, and won't process files that are larger than your setting. You'll find this preference on the Thumbnails panel in the Bridge Preferences dialog. The default is 400MB--try bumping it up to a size larger than your largest PSD and then purge the cache for the folder containing those PSDs.
If that does not work, I'd like to have a copy of one of the PSDs that is not working for you.
-David Franzen
Quality Engineer,
Adobe Systems, Inc.

IDVD won't load large project file..Help!

iDVD won't load large project file once I close the program for the first time since finishing the project. Basically, I made a compilation DVD of numerous individual files spread across quite a few folders/sub-menus totaling about 236 minutes on a Dual Layer DVD+R. I closed the project prior to burning but now, iDVD gets the rainbow wheel everytime you try to load that particular project. What's the deal?
Notes:
-iDVD does still load if I want to load another (smaller/simple project) or start a new one.
-I've tried to start over from scratch a make the exact same project. When I exited out and went to load it, it did the same thing.
-I'm running Mac OSX 10.6.8 Snow Leopard and iDVD 7.1.2.
Any suggestions?

Premiere Elements is not part of the Cloud... and it has a different forum
http://forums.adobe.com/community/premiere_elements?view=discussions
When you go to the correct forum, you need to provide a LOT more information
From the Premiere Elements Information FAQ http://forums.adobe.com/thread/1042180
•What operating system? This should include specific minor version numbers, like "Mac OSX v10.6.8"---not just "Mac".
•Have you installed any recent program or OS updates? (If not, you should. They fix a lot of problems.)
•What kind(s) of image file(s)? When talking about camera raw files, include the model of camera.
•If you are getting error message(s), what is the full text of the error message(s)?
•What were you doing when the problem occurred?
•What other software are you running?
•Tell us about your computer hardware. How much RAM is installed? How much free space is on your system (C:) drive?
•Has this ever worked before? If so, do you recall any changes you made to Premiere Elements, such as adding Plug-ins, brushes, etc.? Did you make any changes to your system, such as updating hardware, printers or drivers; or installing/uninstalling any programs?
And some other questions...
•What are you editing, and does your video have a red line over it BEFORE you do any work?
•Have you viewed the tutorial links at http://forums.adobe.com/thread/1275830 page?
•Which version of Quicktime do you have installed?

How to break up a large .java file into several?

Hi,
I have a pretty large .java file containing many private methods. I rather not have to always work in this very large file. Is there a way to separate this into several smaller files, but to maintain the same relationship of all these private methods being part of the same class?
Thanks in advance,
Steve

I thought that would be the answer. This is my first
Java app. It uses Swing and I use NetBeans as my
IDE.
I knew it was getting too large, but I was trying to
avoid having to reimplement the whole thing. I have a
few more features to add and I can see this file
growing by another 300-400 lines.You'll find it a lot simpler to write the second time round. You really don't want to have classes that big
I do in fact have a couple other .java files where I
created separate classes. Its just that I really need
to rethink or redesign this whole thing.You do. Sounds like you've got one class that does too many things. What does this big class do? Adding new features shouldn't bloat your code this way

Page header plus page footer too large for the page in crystal report 2008.

Hi,
when we selecting pieview and print after entering paramter it's showing error: page header plus page footer too large for the page. error in File.rpt page header or page footer loanger than page. and it's not showing print layout format if i connect another printer it's showing layout designe. and some times it's showing letter formate and if i give print it's taking default lamdscape but we setup defual setup for printer 10*12 inches in particular printer.please guide me how we can solve this issues.
regds,
samapth

This is a really hard post to read. See if you can take a bit of time to reword it, but one thing I do understand is that you are getting this error:
page header plus page footer too large for the page.
Typically, you can trust that if the error is thrown, it is true. E.g.; this is not one of those errors that says one thing, and means another. I suspect that you have some field(s) in the header(s) that grow, depending on the data. If there is too much data or the data is too long ( a text for example), the error will be thrown. To resolve this, see if placing the field(s) into a group footer / header will help.
Ludek

Large excel files won't combine to pdf in Acrobat X or XI

I have large Excel files (0.3 to 1.2 MB) that I used to combine into a single pdf. It will only work now on Excel files smaller than 1MB. This was working a few weeks ago. What happened? I have tried on computers that have both Acrobat X and XI (we have both scattered around our building).
Any ideas? Thanks.

FileOpen is a security add-on, which is needed to open some files. Not a part of Adobe software. Maybe you need to upgrade or report it: http://www.fileopen.com/

Does anyone have an issue with the adobe files jumping around?

I recently purchased a new Mac Pro running Mountain Lion and installed the latest CS6 upgrade. I've been working with with for a few weeks and notice that while I'm in adobe files (mostely InDesign) the pages will jump around or scroll without prompted. If I zoom in to a specific image on a page, it will jump to a different page in the document. I've noticed it with Acrobat also. Not so much with Photoshop, Dreamweaver or Illustrator. Has anyone else experienced the same? Any advice?
I'm not sure if it's truly adobe related, my magic mouse or the new OS?

This seems to be a generic problem not only with InDesign but with many of the Creative Suite/Creative Cloud apps, namely the ones with large pasteboards surrounding the working area. I would very much like Adobe to implement a preference opportunity to disable Magic Mouse finger scrolling locally in these apps. IMHO, moving the pasteboard around is best done with space+click.
It would be great if there were some kind of product enhancement tip link on Adobe's website, but I haven't found any.

*Added* code to existing source file, compiled it, and class file shrunk

Another newbie here. Fortunately, my classpath is ok, so I'm able to compile a .java file.
I added one line of code (System.out.println) to write the value of a variable to a log. After compiling with javac, I noticed that the resulting [new] class file was smaller than the existing class file. I looked at each of the class files with Textpad. It's gibberish, but I quickly saw that a large block of code was missing in the new class file, even though the size of the source file had been increased.
There is a difference, however, between how the two class files were created. The existing class file was compiled (along with many others) by exporting an .EAR file from a development environment (WSAD) to the WebSphere Administrator Console. Conversely, I am now compiling the same source file with javac on my machine.
I suspect that this is the reason why I can add code to a .java file, compile it, and have the resulting class file actually lose code. Even if I am correct, I don't know what to do about it.
Does anyone have an idea?
Regards,
Daniel T.

Thank you both for your replies. I've read many posts over the past few months, and I know how important it is to provide as much info as possible, when asking a question here. That said, I have another tasty tidbit...
After replacing the existing (larger) class file with the new (smaller) class file, my application now produces this:
"*Error 500: LinkageError while defining class*..." [name of class]
*"...(Unsupported major.minor version 50.0) This is often caused by having a class defined at multiple locations within the classloader hierarchy. Other potential causes include compiling against an older or newer version of the class that has an incompatible method signature. Dumping the current context classloader hierarchy: ==> indicates defining classloader ==>[0] com.ibm.ws.classloader.CompoundClassLoader@6bd156d5 Local ClassPath:"*
...[the entire classpath]...
Original exception--- java.lang.UnsupportedClassVersionError:
I'm guessing that my focus should mostly be on the 'Original exception', and maybe I need to revisit the JRE or JDK or JVM (these terms are somewhat nebulous to me, so please forgive me using them interchangeably) on my machine. For now, I'll just keep trying stuff. Thanks again for the replies!
Regards,
Daniel T.

Adding Footer to Large Adobe File (6,400 pages)

Similar Messages

Maybe you are looking for