Adding formula to a cell that is in another table in the same document

Hi there.
I am new to iwork and i have a question.
I created a document in pages and i added diffent tables in the same document.
The question is how can add a formula to a cell include cells that are on different tables?
Thanks

Not possible in Pages, only in Numbers.
You will need to have just one table and have the references internal.
You can make it look like separate tables by hiding cell borders etc inbetween, if that is necessary.
Peter

Similar Messages

I have a iPod touch that's in another country with the same Apple ID as mine , anyone know is that legal?

I have tried to resolve this matter for over two years, and one day ,I read a post about a person living in the UK asking about the (GSM+CDMA) on Jun 16 2013 10:30AM, stating that they had a device that was bought in the UK, with a certain model number and one of the community modulator told that person that they was wrong, Based on the fact that, that model was never sold in the UK,it was strange to me because I have been looking for my daughters I pod touch that was stolen around this very time frame and certain post was asking how do this and that, as I know there are thousands of people asking the same questions. it was how they asked, like over and over, until I saw this Post about the CDMA ,what got me going again asking. If some didn't want there Apple ID to conflict with an Apple ID here in the USA then would the same Apple ID in the UK be not even looked at as the same owner .. I didn't ask before because I had no proof until that post, only be caused they left there name on the bottom of the form they posted

The only problem would be with making iTunes/App Store purchases and updating app.
You can only use the iTunes/App Store in the country you are located AND the payment method in the ID/account must be associated with that country.
Also, not all apps are available in all countries and thus you may not be able to update an app

How do I reference cells from a different table/ sheet in the same document

Say I have a Sheet that contains two Tables: [A] and . Is it possible to cross-reference the content of a cell in Table [A] from Table and use it to create a function in Table ?
Eg: =SUM[TableA(K20)]+[TableB(F20:F50)]
Could I similarly cross-reference the content of cells in Tables in different Sheets?
Thanks,
Seb

Seb,
Yes, you can. With the cursor in the location where you want to place the external reference, navigate to your Sheet and Table of choice and click the cell that you wish to reference. The external reference will appear in the formula.
Note however that we are talking about different sheets in the same Numbers file. We can't reference sheets or tables in other files.
Jerry
Message was edited by: Jerrold Green1

How to avoid that two or more people alter the same Sales Order same time

I'm looking for a way to avoid that two or more people altering the same Sales Order at the same time.
If someone has entered a Sales Order in the system and something needs to be adjust it can be done by two or more people at the same time. The problem is that when someone is saving these changes, the changes of another person, who is still working on the same order, get lost.
So what we need is an alert that someone is already using this order and that no other person can make any changes at that time. So the order needs to be blocked for altering for any other person at that time.
To avoid this I think you have to do something with the Stored Procedure. Or has someone a more simple and better solution.
I've already put this thread in the Business One forum and someone suggested to put it in the Business One SDK forum, as there isn't a solution in Business One itself.
So if someone can give me a direction for a solution I would be very pleased.
Best regards,
Tim

Hi Tim,
The only thing that comes close to what you want in standard SBO is Data Ownership. However, this can't stop someone editing a document that is already being edited.
You can't use stored procedures to track which document is open because the SBO_SP_TransactionNotification proc (which is the only one that you are able to customise) is triggered when a document is updated or added (or cancelled or closed) and not when the document is actually being edited in the user-interface.
You could do this by writing an addon that uses the UI API to trap events in the sales order form. In theory, a sales order is being edited if the sales order form is in Update mode (ie in order for the form to be in Update mode, the user must have selected an existing document and changed the value of at least one field). You can trap the event of the user changing a value and then log the user and document in a table. When other users try to edit the same document, you could check the table and then prevent them changing values. When the first user clicks on the update button (or cancels the update or closes the form etc etc) you can remove the lock on the document. However, I have doubts as to how robust it would be. The problem with this kind of locking solution is that you sometimes get 'stranded' locks (eg user was editing a document when their workstation crashed) and the solution can end up being more troublesome than it is worth.
Kind Regards,
Owen

Simple button action that goes to a page within the same doc

I can't figure this out. I have a button I want to use that takes a person back to the first, or second page of the same doc. It's a catalog section with a table of contents. I need to make links for the pdf that takes people to certain pages within the same document.
In the Buttons panel, I see how to make the button, but when I assign an action, the only choice that makes sense is "Go To Destination", but I don't get or see any way to choose "page 2" of the document, or another selection method.
I did this before a few years ago on hundreds of pages, and when I open those old documents up to copy/paste the same buttons, they don't even appear to have actions on them anymore, as if it never happened.
So, what's the secret? Certainly there's a way to link to another page in the same ID file, no?

Finally figured it out. I do NOT use the button panel at all. No buttons needed. Just select the grouped object that I want for my button, and hit the "add hyperlink" button in the Hyperlink panel. Then choose "Page" from the menu that opens up and be on my way. What was throwing me for a bad loop, was that I had copied and pasted the button graphic form another document. Well, since the link made previously was broken now, I had the red flag in the Hyperlinks panel...and thus, the "new hyperlink" button was greyed out, sending me in circles. The minute I deleted the old hyperlink it carried over from the old document, the new hyperlink button worked again and all was well.
Thanks.

I installed Firefox 3.6. Since then, I am unable to open pdf documents in Firefox. I get a black page. I tried opening the same document in Internet Explorer. It worked fine. I recently installed Nuance's pdf reader and thought that might be the problem.

I installed Firefox 3.6. Since then, I am unable to open pdf documents in Firefox. I get a black page. I tried opening the same document in Internet Explorer. It worked fine. I recently installed Nuance's pdf reader and thought that might be the problem. Uninstalled it. Still have the problem with Firefox.
== This happened ==
Every time Firefox opened

How about if you right click on the PDF and select Save Link As..., and then open it locally from within Reader? Does it work ok then? That might be a workaround until the issue within the browser is resolved.
Rob Jaworski
Intl Program Manager

I subscribed to iTunes Match and would like to sync my music on multiples devices that have different Apple IDs within the same iCloud family.

I subscribed to iTunes Match and would like to sync my music on multiples devices that have different Apple IDs within the same iCloud family.
Can someone indicate the way to proceed?
Thanks.

Hi,
You can't use family sharing or multiple Apple IDs with iTunes match.
ITunes match is only attached to Apple id that you used to subscribe.
Jim

Good night recently my iphone 4s was exchanged for a new one because was defective and was in warranty. the problem is that now I try to use the same apple id on itunes and applications while had bought the old iphone does not appear and I think should ap

good night recently my iphone 4s was exchanged for a new one because was defective and was in warranty. the problem is that now I try to use the same apple id on itunes and applications while had bought the old iphone does not appear and I think should appear. Can someone help?

?

HT204053 How do I set up a second I cloud ID so that 2 family members can use the same I Pad?

How do I set up a second I cloud ID so that 2 family members can use the same I Pad?

To change a secondary account to a primary account do the following:
Tap Settings > Mail, Contacts, Calendars.
Delete the secondary account. (This only deletes if from your iPad, not from iCloud)
Tap the Back button.
Tap iCloud.
Delete the primary account. (This only deletes it from your iPad, not from iCloud. Your son's iPad will not be effected by this.)
Add the secondary account that you want to be your primary account.

How to avoid that two or more people altering the same Sales Order

I'm looking for a way to avoid that two or more people altering the same Sales Order at the same time.
If someone has entered a Sales Order in the system and something needs to be adjust it can be done by two or more people at the same time. The problem is that when someone is saving these changes, the changes of another person, who is still working on the same order, get lost.
So what we need is an alert that someone is already using this order and that no other person can make any changes at that time. So the order needs to be blocked for altering for any other person at that time.
To avoid this I think you have to do something with the Stored Procedure. Or has someone a more simple and better solution. So far I didn't find a standard option in Business One neither a solution in this forum.
Best regards,
Tim

Tim,
There is nothing in the application settings in Business One that could be used to prevent this. You may post this to the SDK forum as well and perhaps there is a way to achieve this through SDK.

Can't update software because a message appears that I have to log with the same Apple ID that was used to purchase them: iMovie, Garage Band

I can't update software because a message appears that I have to log with the same Apple ID that was used to purchase them: iMovie, Garage Band, iPhoto, but those apps came with OSX Lion.
How can I get the "original" Apple ID?

Support Downloads
http://support.apple.com/downloads/
Luckily, there is always more than one way to update software.

My setup: iMac hardline to Canon i960 printer. Issue: endless printing of the same document. The printer window states that the pinter is in use and there is nothing listed in the Print Queue. How can I stop printing the document?

My setup: iMac hardline to Canon i960 printer. Issue: endless printing of the same document. The printer window states that the pinter is in use and there is nothing listed in the Print Queue. How can I stop printing the document?

Soution: Delete the printer and add the same printer back in, therefore creating a new print queue.

My iphone will no longer connect to my home wifi. it recognises it, but the searching cirlce is constant next to network name. there are three laptops and another iphone on the same wifi that have no issues. i have reset network settings

my iphone will no longer connect to my home wifi. it recognises it, but the searching cirlce is constant next to network name. there are three laptops and another iphone on the same wifi that have no connectivity issues. i have reset the network settings but that did not help. the issue started last week when the second iphone was introduced to the house, could this be the cause?

No.
Any problem connecting your iPhone to any other wi-fi network besides your own?

TS4436 Seems to me this is a bunch of self serving crap. I have many small cameras that don't do this, in the same specs.

Seems to me this is a bunch of self serving crap. I have many small cameras that don't do this, in the same specs.

gdgmacguy,,
Let me help you a bit with the english: "As a fellow user here I can tell you that no one cares what you are saying".
Please let me know if the translation is not correct.
The camera *****. I'm not holding it wrong.

Getting S.M.A.R.T. when trying to install Mountain lion. Hard drive works pretty well. I understand that many users have been facing the same issue. Has apple patched it yet?

I'm getting S.M.A.R.T. error when trying to install Mountain lion. Hard drive works pretty well despite the Failing status. I understand that many users have been facing the same issue. My hard drive was/is working perfectly. Has Apple patched it yet?
Has someone found a solution which is not replacing the hard drive which works just fine? Or Is anyone aware of a procedure that can force the installation despite the S.M.A.R.T error? Below details of my hard drive
Thanks
ST31******ASQ:
Capacity:          1 TB (1,000,204,886,016 bytes)
Model:          ST31000528ASQ
Revision:          AP24
Serial Number:                      6V***5JR
Native Command Queuing:          Yes
Queue Depth:          32
Removable Media:          No
Detachable Drive:          No
BSD Name:          disk0
Rotational Rate:          7200
Medium Type:          Rotational
Partition Map Type:          GPT (GUID Partition Table)
S.M.A.R.T. status:          Failing
<Edited By Host>

If you haven't done so, run Disk Utility /Applications/Utilities
to run a live verification.
The drive may be ok at the moment, but that's not to say the drive may fail at anytime.
Hopefully you have all your important data backed up just in case.

Adding formula to a cell that is in another table in the same document

Similar Messages

Maybe you are looking for