Adding GOS toolbox to IM22 transaction

Hi All.
Transaction IMA11 has a GOS toolbox icon attached at the top left corner which is used to attached documents or set notes etc. Similarly I have a requirement to create the same GOS toolbox for IM22 transaction. Can anyone help me out in this ?
Earlier to add this Icon for VA02/VA03 transaction , I had set the Parameter ID: SD_SWU_ACTIVE = X  Activate Workflow Box in VA02/VA03  to the user profile to get this icon in the screen. Is there any way we can do the same for IM22 transaction. Please help me out if anyone has done the same scenario.
Points will be rewarded for useful answers.
Regards.
Akhil Rai.

Hi Akhil,
Did you has solved this issue??
or Anyone has solution for this problem
I have same case...
Thanks,

Similar Messages

  • How to add GOS toolbox to standard transaction

    Hello, Experts.
    I want to add GOS(Generic Object Service) toolbox to these transaction: VK12, KE42, KE52, etc.
    so that i can store business document directly from transaction.
    The question is, what should i do to add the GOS toolbox to these transactions?
    Thanks.

    Hi Jiujiang,
    You can do it yourself without basis help. Follow the following steps.
    From your transaction, go to System -> User Profile -> Own Data
    You will reach a new screen. Select the 3rd view "Parameters"
    Add one more line with Parameter ID as SD_SWU_ACTIVE and parameter value as "X". Save
    Now when you go to any document with your transaction. Services for Objects will appear to the left of "CHANGE Quotation xxxxx : OVERVIEW".
    Look also this thread:
    Hope this helps,
    Iván.

  • How to attach GOS in a standard transaction ?

    hi folks,
    could anyone tell me how to attach Generic Object Services (GOS) to a standard transaction eg me23n.
    this GOS toolbar is present in certain transactions like pb40 ..i want to implement the same in me23n ...how can i do that?

    welcome to SDN!!!
      cht this webblog
      /people/rammanohar.tiwari/blog/2005/10/10/generic-object-services-gos--in-background
      reward points if helpful

  • How to Activate GOS button in HR transactions like po13,pp02,pp01 etc

    Hi guys,
    Can you please help, could you please give me so guyide lines on how to activate the GOS button in HR transactions like po13,pp01,pp02 etc. The GOS button is not visible at all in our system. I have rad various threads but they all assume that the button is visible. My requirement is activate it so that it becomes visble.
    We would like to attach .doc.xls.pdf documents against various OM objects hence the need to activate the GOS button.
    Thank you.
    Andy

    Hello Andy,
    I found your post in another thread and I replied there.  So I only add the link:
    Attach PDF to position
    Anyway I was wondering so far if you did selected any HR object in PO13 or PP01 to make sure taht GOS button doesn't appear?  GOS button is shown only if you select an HR objects in those tcode.  (cfr the link above for screenshot).
    regards
    Hadrien

  • Possibility of adding new fields to migo transaction

    Is there a possiblity of adding new fields in migo transaction so that we can enter the base price of items in po.
    Also Can we send mail to relevant authorization if there is difference in price entered in the po and the value entered in GR

    Hi, You can use BADI 'MB_MIGO_BADI' for adding custom fields at item as well as header level .
    or Check SAP Note 339448 - MIGO: settings of table control
    2-You can not do any thing related to price in MIGO, since you cannot enter any manual values in MIGO, it will always pull from PO or MIRO (in case of Imports).

  • Adding a weekly view to Transaction PA51

    Transaction PA61 has a button for accessing a WEEKLY maintenance view.  Is it possible to customize Transaction PA51 to have a similar display WEEKLY view?

    Dear Brinjesh,
    Your requirement is adding a view to MM transactions. If you look at technically, you have to add new view to existing tab strip in main screen. So, the screen type should be sub-screen to add to tab strip contol.
    Coming to your through of creating new screen, there should be some control like menu or button to navigate from main screen. Can you say, is it convenient for end user? Doesn't it look odd?
    Please post your opinion on this.
    Regards,
    Prasanth

  • Adding new authorization objects to transactions

    Hi experts,
    i would like to add new authorization objects to specific transactions, for example the object K_CCA for checking the cost element in the transaction KB15N.
    What do we have to maintain, except the transaction code with (SU22). What do we have to do with the program behind the transaction?
    Is it "just" adding two line of code into the auth object check in the program, similar or like described for client specific ABAP-programs???
    Any experiences on that?
    Regards
    Florian

    Hi,
    First add the objects in DSO then in Info Cube.
    Map the same with transformation.
    Move the objects to production then DSO.
    Load the DSO first. then delete the data from cube in production.
    Now move the modified cube and transformation to production.
    Now load the Cube from DSO.
    No need to change any thing in existing query.
    I hope this will help.
    Thanks,
    S

  • Activate GOS toolbar in WAM04 transaction

    Hi Experts,
    Can you tell me how can we activate the Generic Object Services toolbar for transaction WAM04 (disposal documents) in EHS Waste Management?
    Or write a functional specification for that?
    Thanks

    Dear Abbie
    Go through the below documentation for GOS Tool Bar configuration
    Activating Generic Object Services Toolbar in SAP Objects
    Balajee

  • Adding UPC to the HUPAST transaction

    Hello all,
    We currently use SAP Retail to replenish our retail stores throughout Canada and the US.  We would like to have the UPC field visible in the HUPAST transaction so that when we are scanning our articles we have better visibility of the articles being scanned.  Presently, it shows the SAP article number which is not intuitive (i.e. no logic), therefore the distribution centre would like to know if HUPAST can also display the UPC code in addition to the SAP article number.
    Any advise would be very appreciated
    Kind regards,
    RJ

    RJ,
    There are some BADI's that are available with in HUPAST for enhancements, but I do not know if  an additional screen field can be added using the following enhancements available.
    BADI_HU_MAIN 
    BADI_HU_PACKING_ALWD
    BADI_HU_SAVE 
    BADI_HU_AUTOPACK 
    ENHANCEMENT-POINT LV51PF43_01 SPOTS ES_SAPLV51P
    What kind of development options you are looking at ? Are you planning to develop a custom tcode similar to HUPAST ?
    Regards,
    AB

  • Web Services,Delivery Document Adding Error  Could not commit Transaction

    Dear All,
       I am working with SAP Business One Web Services, While adding Delivery Document it's giving error  "Could not commit transaction"  Please Give your Suggestion It's urget.
    Thanks,
    Madhu
    9701155577

    Hi,
    Do you mean there is no journal entry created orthat the link is missing?
    If this really is a delivery for stock/inventory items there should be a journal entry, else it sounds like an error in SAP.
    Are there still changes in the stored procedure? Also have a look at the TansactionNotice. It is possible the roll back does not work correctly.
    Again sounds like an error.
    Doe sit happen all the time?
    Only for certain items?
    Are the stored procedures now clean?
    What Version are you using?
    Kind Regards,
    Friederike

  • Adding a new tab to transaction IE02/IE03

    Hi
    i've added a new "Z" tab to transaction IE02/IE03 and created in it a subscreen. In the subscreen i've put 2 radio buttuns with the FctCode RAD. When i switch from 1 radio buttun to the other on i get the error message "Requested function RAD is not avalible here" .
    Is there any way to add radio buttun to a Z subscreen i add to a SAP transaction ?  (if i dont add fctcode to the radio buttuns i dont get the error messege but i need to swith between the radio buttuns but pushing the other radio button and pressing ENTER)

    Hello Mayethski
    Can you please tell me if you have got a solution for this since I have approximately the same thing to implement.
    Thanks in advance

  • Adding a Field in a Transaction Datasource

    Hi,
    I have created a ZAUTH InfoObject in BI for the field Authorization group (BEGRU - MARA).  This ZAUTH Infoobject is getting filled in through Master data Load of 0MATERIAL.  I have added the Infoobject ZAUTH as a Navigational Atttribute in 0MATERIAL.
    I have created a Billing DSO for the Transaction load which gets data through the Datasource 2LIS_12_VDITM.  In DSO, i have a requirement wherein i have to write a routine using 0customer & Authorization group (ZAUTH).  The requirement goes like this:
      If the Customer number = 100 & Authorization = ABC, Put Detail = Stock.
      If the Customer number = 200 & Authorization =  XYZ, Put Detail = Trade.
    The Problem here is i dont have the BEGRU field in the Transaction Datasource 2LIS_12_VDITM.  I know we can customize the Datasource & add this field.  But, is there any other way to do this?
    Regards,
    Murali

    I guess you can realize this requirement without enhancing the datasource. There is 1:1 relationship between material and auth group as it is added as an attribute on it. You can derive the auth group by looking up material master data in the code, for the material on the billing document. Once this is derived you can build your logic for detail. You need to derive auth group at a lower level in the data flow and put logic for detail at the next level or you can consider using start (derive auth group) and end routines (logic for Detail).

  • Adding security object to a transaction code

    Greetings,
    I received a request from our Financial side of the house to restrict access to a particular fund type in the transaction codes FM5S and FM5I.  When I examine the objects required for those transaction codes, I don't see anything that is tied to the fund type.
    My questions:
    1.  Can I add an arbitrary object that is checked when a transaction code is executed?
    2.  How do I determine which object is appropriate?  For example, searching for a "*type" in SUIM, Authorization Objects by Field, Text, seems pretty chancy.
    Bill Bormann
    Purdue University

    > It's fairly straightforward to add an object that is required when a transaction code is added to a role, but, you still have to make some kind of modification (cosmetic or more) to the underlying code to check that object.
    Unless it is already checked in the code at the correct location you want to use it for control.
    > For these transactions (FM5I and FM5S), SAP supports a check for fund authorization groups...
    SAP "owns" the authority-checks in SAP standard code. In some cases you can influence them or how the system reacts to them - but not all.
    > ... and the object specifying the groups is automatically added when these transactions are placed in a role. 
    Only if instructed to do so via SU24.
    > Alas, we're not using fund authorization groups here, so if the business wants to restrict by type we're going to have to either find a SAP-supplied object that includes the fund type and modify the code...
    No. Only if there is no equivalent check and no enhancement / customer exit point available
    >...  (here, two transactions)
    Most likely it will anyway just be one and the same function module so is checked or can be changed centrally.
    > or assign the fund types to fund authorization groups.
    This is usually the easiest and least intrusive way. Take note that group type fields (typically called BEGRU) are mostly optional objects.
    The system only reaches the check at all if there is a value maintained. If not, the check is suppressed and you might not even see the trace of it in ST01 or SU53.
    I recommend contacting your functional support of the Funds Management "module" and go through the options with them. They should know what can be done and which is most sustainable.
    Cheers,
    Julius

  • About adding UDFs for serial number transactions

    Hi,
    For some reasons, I need add some UDFs when receivie product or delivery product which are managed by serial number. In UDFs management, I found there is one object called Serial/Batch number object. I add my UDFs under this object then when I go inside serial number transaction report, I can see the new added UDFs. But my question is when I use DI to add goods receipt to receive serial number into system, I can't see the UserFields property. Below is the code I use:
                // Lines + Serial Number
                oDoc.Lines.SerialNumbers.ManufacturerSerialNumber = "LANSN0007";
                oDoc.Lines.SerialNumbers.UserFields.Fields.Item("U_MyUDF01").Value = "XXXXX";
                oDoc.Lines.SerialNumbers.Add();
    In above code, there is no way to set the UDFs like usual. There is no property called UserFields under SerialNumber. So how I can set the value in the UDF then? Or I am using wrong way to add value in the UDFs?
    Any idea?
    Thanks,
    Lan

    Hi nd.Q,
    My version is 8.80.235 with PL:17. But in object of SAPbobsCOM.Documents.Lines.SerialNumbers, I can't find the property UserFields which allow you to set the your UDFs value as usual. In SDK help document, I can't find the UserFields property in SerialNumbers object. In my code I can't use code like this:
    oDoc.Lines.SerialNumbers.UserFields.Fields.Item("U_XXX").Value = "XXX";
    Any idea?
    Thanks,
    Lan

  • Adding new field in ES55 transaction

    Hi experts
    1)I have to add new input field in transaction ES55( second screen where address and all other details are coming )to input Business Partener Number .
    I tried to do so using user exit I tried all function modules of XES55 function group but couldnt find any exit.
    What should I do?
    2) My second requirement is as soon as user Input Business Partner No. the address details of that business partener should come here by itself as connection object address details.
    Any ideas? What should I do?How can this be done.
    Thanks

    Hi,
    good question - as far as I know, there is no solution to this requirement. BUT usually the business partners are created AFTER the connection object was created and get the address of the connection object...
    But anyway, only thing I can think of, check the exists ITOB000* - maybe those are passed ...
    Otherwise - just use ECC 6.0 and the enhancement framework.
    KR
    Uwe

Maybe you are looking for