Adding Icon Image Elements to a Navigation Bar in Adobe Muse?

I want to add a rollover image in my navigation bar - I want the rollover image to have a dotted line surrounding it and I can't make dotted lines in Muse so I want to make the image in fireworks and import it into my menu. Can this be done and if so, how?!!

You can use fill image for menu items with defined states, regarding dotted stroke line , try this :
https://creative.adobe.com/addons/products/1844#.VFUMBslsiks
Thanks,
Sanjit

Similar Messages

DPS: Disabling Top Navigation Bar in Adobe App Builder disables Hot Spots in Articles

When I disable the top navigation bar in Adobe's app builder, my hot spots (linked to MSOs) in certain articles are also disabled. The hot spots work if I "refresh" and swipe back to an article with no overlays. How do I get my hot spots to work and also have the top nav bar disabled? Thanks.

Unfortunately, I do not know how to access it now that the app has been accepted. I had originally typed it up in Word thinking that I would be able to access it from the appeal site later, but that site is no longer accessible.
I essentially explained that I had followed the 59 page DPS guide step-by-step and that no where did it explain how to enable the iOS status bar to be visible at all times ... that I was a designer and not a programmer ... that in 2012, 12 of the top 20 grossing apps on the iTunes Newstand were created with DPS ... that my app was an interactive "literary" travel app that was to be read like a brochure. All that must have done the trick.

The Menu bar in Adobe Muse

Hi,
I would like to understand why the menu bar in adobe muse it doesn 't show aligned in a website that I built in Adobe Muse. It was ok before but somenthing changes the configuration and now whem I see the website on preview mode it appears misplaced.
Thank you

Hi,
Here is the screen shot of the website. Please note that in Design mode the menu bar is aligned and in the preview mode it is out of alignment.I ll wait your reply. http://
Date: Sat, 14 Dec 2013 05:01:11 -0800
From: [email protected]
To: [email protected]
Subject: The Menu bar in Adobe Muse
    Re: The Menu bar in Adobe Muse
    created by p_nath in Adobe Muse Bugs - View the full discussion
Hello,
Please provide us the page URL where we can see this issue.
Cheers
Parikshit
     Please note that the Adobe Forums do not accept email attachments. If you want to embed a screen image in your message please visit the thread in the forum to embed the image at http://forums.adobe.com/message/5929794#5929794
     Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page: http://forums.adobe.com/message/5929794#5929794
     To unsubscribe from this thread, please visit the message page at http://forums.adobe.com/message/5929794#5929794. In the Actions box on the right, click the Stop Email Notifications link.
           Start a new discussion in Adobe Muse Bugs at Adobe Community
For more information about maintaining your forum email notifications please go to http://forums.adobe.com/thread/416458?tstart=0.

How to put webpage in separate folder but linked to menu bar in adobe muse?

How to put webpage in separate folder but linked to menu bar in adobe muse? Need to do this because I want to make this page password protected from the rest of the website.

Hello,
While uploading only that page from Muse to your host, use the "Host Directory" option to upload it to a different folder. You can choose to upload selective page by disabling/enabling "export page" option for the pages from plan view in Muse, as shown in this screenshot: http://screencast.com/t/vpuIEjtVdZRS
To link selective pages to the menu, use "Manual" menus. This will allow you to link any page to the menu, even an external page. You can change the menu type from here: http://screencast.com/t/Ej8x2KrJ
Hope this helps.
Cheers
Parikshit

Adding Icon / Image on a Submit / ValueHelp button

Hi:
Can any one tel me how to add Icon / Image on a Submit / ValueHelp button.
Thanks
Vijai

Vijai,
Check out Juergen's reply in below thread:-
Adding Image in Button.
Chintan

Can I have two Menu Bars in Adobe Muse?

I am trying to set up a "shopping" website that needs two separate menu bars separating the "Merchandise" menu from the "Services" menu. Does anyone know if and how to use two separate menu bars on a Muse site?

Hi,
Please refer to the following link Can I add more than one menu to a master page?
Regards,
Aish

Pages and icons (in the tabs and navigation bars) are too big due to 22 upgrade

Due to FF22 upgrade (from 21), all my icons (from webpages, addons and regular buttons) and tabs have got bigger and that's really ugly because of the low resolution of the images. Also considering I have a rather big number of tabs I can just see a smaller number of them and it's annoying.
The zoom of the page is now bigger (given that I has already zoom in in version 21, now the pages are too big and I have to zoom out a page that was correctly zoomed in 21)
Surprisingly the menu bar is intact !
Is that a new graphic convention ? Is there an update of something like GTK+ in this new version that could be responsible of this bug ? And mainly is there anyway to fix it ?
My screen resolution is 1920*1080. And for example with chromium or FF21 the menu have the perfect size.
PS: Sorry for my poor English.

All these confusing explanations on how to fix something that never should have been changed. It just pisses me off that I now have to get used to inferior graphics because someone thought it would be cool to screw with settings people have obviously been using for who knows how long. I have tried simply zooming down and that doesn't work. I am not going to enter a bunch of techie gobbledeegook and screw up my whole internet experience. I am just PISSED!!!!
How about another version to correct this? Hey, if someone wants to stay with this one, fine. At least give us people who aren't tech wizards an option to stick with what we have and what we have been happy with for years. Now, excuse me.. I need to get away from this.. I am so f***king pissed!!!
30 minutes later: Okay, I went to about:config and a window came up .. pretty much telling me my computer would blow sky high and take me with it. I'm just an old lady who WAS passing my time browsing and playing a few games. Oops, I'm getting mad again. PS I NEVER talk like this, but this has ruined my whole fricken day.
15 minutes later: I decided to give up. I went to play some monopoly at my favorite game site and the pop up window with the game board was unplayable. The board was way down the window and not complete. So, I went back and despite all the warnings went back to Version 21. I have used Firefox for years and have sworn by it and defended it and given it my best reviews. up until now. I absolutely don't want to quit FF, but I don't know all the tech stuff, I guess is required to change formats back to what you are used to. I still can't believe FF would make a drastic change across the board without warning or giving a choice. If I didn't know how to downgrade, I wouldn't be able to use my PC to help me get through each day. Why why why?

The Go back , or forward drop-down... the history reload ..the Stop loading the current page ....and Open your home page(s) '''icons are missing from my navigation bar.''' It tried reset and it doesn't work. How do I fix it ?

I just loaded firefox 4 and am using windows areo

This whole matter is extremely frustrating. There is NO home icon on any toolbar nor under customize so it can't be dragged in. And this running back and forth in the so-called Help that doesn't help is "helpless!" I'm getting nowhere.

Image Insert Dialog with Navigation Bar?

How come the Image Insert dialog now shows the

No, that stuff wasn't there before.
No, it isn't necessary.
I guess is some sort of style sheet is begin applied that wasn't before.
Take a look at this.
When I first typed this message, my typing looked like this. I went and posted and it all pretty much disappeared except for some blank lines. A couple other times I've seen the overlapped lines of typing.
(And the jumping of the box on Autosave is still occurring.)
I think the last forum updates must have broken more than they fixed.
Attachments:
bad edit window.PNG ‏10 KB

Know why a navigation bar retains previous unwanted images?

Using CS3, I am trying to insert a new navigation bar. When I upload changes, the nav bar uses a combination of current images and old images from a previous nav bar. The "up image" is the problem as it maintains an image of a previous nav bar. I have deleted all the old images from local folder and from server, and cannot figure out how this new insert is picking up old attributes. I have determined unchecking "preload images" eliminates the problem, however now my images won't preload. After countless hours of no resolve, thought I would try a forum. Any thoughts?
djf

I cleared the cache and reset the browser before and no resolve. Just to clarify, these images are from a navigation bar that was created last year and never used. It seems as if there may be a data file somewhere on the server. I have cleaned everything out. Don't understand.

Can't Modify Navigation Bar!

Okay, I've played with this for long enough...now I'm
desperate!
I have a template, which is based on another template, and I
have inserted a Navigation Bar. Works fine. BUT, when I try to add
more elements to the Navigation Bar, I get an error message:
"Making this change would requirechanging code that is locked by a
Template or a translator. The change will be discarded." and, as
promised, it promptly disregards all the work I just did. Does
anyone have any ideas? I'd really appreciate it.

Your method seems like it's the wrong approach.
It's easy to do with CSS or with javascript.
With CSS you would have a little stylesheet embedded in the
head of each
page that allows you to set the down state for any given
button (each button
would have a unique id - for example -
<a href="foo.html" id="button1">...<a
href="bar.html" id="button2">
and then your stylesheet would have this -
a#button1 {{ styles }
on one page, and on another this -
a#button2 {{ styles }
See how that works?
With javascript, put this in script tags in the head of the
document -
function P7_downImage() {{
var g7="<imagename>"
var g7url="<pathname>"
if ((g7=MM_findObj(g7))!=null) {{g7.src=g7url;}
and this on the <body> tag
onload="P7_downImage()"
Then on each page you would need to make two edits:
Set g7 to the *name* of the button (not the file name but the
HTML name -
e.g., "productsbutt"), and g7url to the pathname to the
button (e.g.,
"images/nav/button3.gif"), and bada bing, bada boom!
There is an excellent tutorial here -
http://www.projectseven.com/support/answers.asp?id=126
This will allow you to keep the navigation in non-editable
regions of the
template page....
Murray --- ICQ 71997575
Adobe Community Expert
(If you *MUST* email me, don't LAUGH when you do so!)
==================
http://www.dreamweavermx-templates.com
- Template Triage!
http://www.projectseven.com/go
- DW FAQs, Tutorials & Resources
http://www.dwfaq.com - DW FAQs,
Tutorials & Resources
http://www.macromedia.com/support/search/
- Macromedia (MM) Technotes
==================
"pflew" <[email protected]> wrote in message
news:elfp32$n1d$[email protected]..
>I finally solved my problem, which was I wanted to change
the down image
>for
> each of the buttons on the navigation bar when the page
associated with
> the tab
> was loaded. You cannot do this in a template via modify
/ navigation bar.
> You
> can do it using the tag inspector / behavours.
>
> Hope this helps
>

Buttons on navigation bar not working??

Hello all, I am in a web design class and im currently wokring on my website. When i made my navigation bar in adobe fireworks and saved/exported it then tried to open it in dreamweaver cs6. The way i did this was insert>image objects>fireworks HTML then selected the html version of the nav bar. But for some reason when i try to do live view or open it in browser the buttons don't work, they worked when I opened them from fireworks. Someone help please :/

The old Fireworks code relied on javascript for the menus. If the javascript file is not in the proper location or is missing then the menus will not work. In order to tell if this is the page we would need access to a test page online to view your code. In case this is not possible, I am also including a link to the KB article discussing how this process works from FW to DW to explain all of the steps.
Macromedia Fireworks - Working with Macromedia Fireworks MX buttons and navigation bars : Export the navigation bar

Why does UIBarButtonItem in navigation bar appears disabled?

I have a UITabBarController with 4 UINavigationControllers in it. I successfully added a right UIBarButtonItem in the navigation bar of one of the controllers but it appears disabled and I can't click it. I've already tried to set enable property to true but nothing works...
Did someone already had the same problem? I'm struggling with this for hours...
Here's the code:
self.navigationItem.rightBarButtonItem = [[UIBarButtonItem alloc] initWithBarButtonSystemItem:UIBarButtonSystemItemAction target:self action:@selector(socialShare)];
And a screenshot:
I'll be waiting for an answer.
Thanks for your help!

Are you within these guidlines?
Before creating a navigation interface, you need to decide how you intend to use a navigation interface. Because it imposes an overarching organization on your data, you should only use it in these specific ways:
Install it directly as a window’s root view controller.
Install it as the view controller of a tab in a tab bar interface.
Install it as one of the two root view controllers in a split view interface. (iPad only)
Present it modally from another view controller.
Display it from a popover. (iPad only)

Why navigation bar or Flash options are missing?

First of all, thank you to set aside time to look at this issue.
1- Product:
     Dreamweaver / Trial Version
2- Behavior:
     I am trying to create a navigation bar using images but the navigation bar option is missing when I try to get it from the insert panel - insert/common/image/???Navigation bar???.
Also the flash text, flash button, flash paper, flash video options are missing from insert/media from the application menu bar.
3- Browser / version
     Mozilla Firefox / 3.6.10
4- OS / Version
     Windows Vista / 32 bit - Service Pack 2
Thanks you for your assistance.

F1 (help) Spry Menus.
Spry Widget Samples -
http://labs.adobe.com/technologies/spry/samples/
Using Spry with Widget Browser -
http://www.adobe.com/devnet/dreamweaver/articles/spry_menu_bar.html
Nancy O.
Alt-Web Design & Publishing
Web | Graphics | Print | Media Specialists
http://alt-web.com/
http://twitter.com/altweb

NoScript in 4.0 on Navigation Bar not Add-On Bar

In FF4.0 the NoScript icon shows up on the Navigation Bar but not on the Add-Ons Bar. I don't want the Navigation Bar. How can I get it onto the Add-Ons Bar?

# Press Alt+V
# Select Toolbars
# Select which toolbars you want.
''<hr>Note: If anyone's reply has solved your problem, then please mark that reply as "Solved It" to the right of that reply after logging in your account. It will help us to concentrate on new questions.''

Adding Icon Image Elements to a Navigation Bar in Adobe Muse?

Similar Messages

Maybe you are looking for