Adding "Image menu/panel"

Hey all,
I used to work with Photoshop elements but recently upgraded to CS4. To put my problem short, i work with 50~100 pictures at a time. I crop them and add some light, so i need to have them somewhere where i can open them easy right? Well photoshop and its default settings just toss them on upper side which is kind of ok, but id like to add an panel downside where i can scroll down and choose the picture i want to. I tried to get fixed with "Arrange Documents" button and it turned out to be almost what i wanted, but not quite. Here is screenshot which i took to clear things out a bit =>
http://koti.welho.com/epunavaa/photoshop.png
(The red squares would be mini-images of the images that i use and there would be 9~10 each line, and you could scroll down for more)
Thank you

Similar Messages

Adding image to panel gives an error

any ideas whatz wrong with this
Panel p = new Panel();
Graphics g = getGraphics();
g.drawImage(splashImage, 0,0, p);
add(p,BorderLayout.CENTER );
the error i get is
"AWT-Windows" (TID:0x14bda60, sys_thread_t:0x56a0cb8, state:R, native ID:0x540) prio=5
at sun.awt.windows.WToolkit.eventLoop(Native Method)
at sun.awt.windows.WToolkit.run(WToolkit.java:130)
at java.lang.Thread.run(Thread.java:479)
"SunToolkit.PostEventQueue-0" (TID:0x14bde28, sys_thread_t:0x569f970, state:CW, native ID:0
at java.lang.Object.wait(Native Method)
at java.lang.Object.wait(Object.java:417)
at sun.awt.PostEventQueue.run(SunToolkit.java:406)
"AWT-EventQueue-0" (TID:0x14be1f0, sys_thread_t:0x5673818, state:CW, native ID:0x270) prio=
at java.lang.Object.wait(Native Method)
at java.lang.Object.wait(Object.java:417)
at java.awt.EventQueue.getNextEvent(EventQueue.java:216)
at java.awt.EventDispatchThread.pumpOneEventForComponent(EventDispatchThread.java:101)
at java.awt.EventDispatchThread.pumpEventsForComponent(EventDispatchThread.java:89)
at java.awt.EventDispatchThread.pumpEvents(EventDispatchThread.java:84)
at java.awt.EventDispatchThread.run(EventDispatchThread.java:76)
"SymcJIT-LazyCompilation-0" (TID:0x14ae228, sys_thread_t:0x4a1cf90, state:CW, native ID:0x4
at SymantecJITCompilationThread.DoCompileMethod(Native Method)
at SymantecJITCompilationThread.run(JITcompilationthread.java, Compiled Code)
"SymcJIT-LazyCompilation-PA" (TID:0x14ae1f0, sys_thread_t:0x4a1b9e8, state:CW, native ID:0x
at java.lang.Object.wait(Native Method)
at java.lang.Object.wait(Object.java:417)
at SymantecJITCompilationThread.run(JITcompilationthread.java, Compiled Code)
"Finalizer" (TID:0x14a9590, sys_thread_t:0x4964e10, state:CW, native ID:0x4dc) prio=8
at java.lang.Object.wait(Native Method)
at java.lang.ref.ReferenceQueue.remove(ReferenceQueue.java:105)
at java.lang.ref.ReferenceQueue.remove(ReferenceQueue.java:120)
at java.lang.ref.Finalizer$FinalizerThread.run(Finalizer.java:167)
"Reference Handler" (TID:0x14a9338, sys_thread_t:0x4961460, state:CW, native ID:0x598) prio
at java.lang.Object.wait(Native Method)
at java.lang.Object.wait(Object.java:417)
at java.lang.ref.Reference$ReferenceHandler.run(Reference.java:107)
"Signal dispatcher" (TID:0x14a9370, sys_thread_t:0x4960130, state:R, native ID:0x55c) prio=
"main" (TID:0x14a9420, sys_thread_t:0x2f2888, state:CW, native ID:0x528) prio=5
Monitor Cache Dump:
sun.awt.PostEventQueue@14BDE28/153CBC0: <unowned>
Waiting to be notified:
"SunToolkit.PostEventQueue-0" (0x569f970)
java.lang.ref.Reference$Lock@14A9348/14DEB30: <unowned>
Waiting to be notified:
"Reference Handler" (0x4961460)
java.awt.EventQueue@14BE108/153C848: <unowned>
Waiting to be notified:
"AWT-EventQueue-0" (0x5673818)
SymantecJITCompilationThread@14AE228/1505068: <unowned>
Waiting to be notified:
"SymcJIT-LazyCompilation-PA" (0x4a1b9e8)
java.lang.ref.ReferenceQueue$Lock@14A92F0/14DEEB8: <unowned>
Waiting to be notified:
"Finalizer" (0x4964e10)
Registered Monitor Dump:
SymcJIT Method Monitor: <unowned>
SymcJIT Lazy Queue Lock: <unowned>
Waiting to be notified:
"SymcJIT-LazyCompilation-0" (0x4a1cf90)
SymcJIT Method Monitor: <unowned>
SymcJIT Method List Monitor: <unowned>
SymcJIT Lock: <unowned>
utf8 hash table: <unowned>
JNI pinning lock: <unowned>
JNI global reference lock: <unowned>
BinClass lock: <unowned>
Class linking lock: <unowned>
System class loader lock: <unowned>
Code rewrite lock: <unowned>
Heap lock: <unowned>
Monitor cache lock: owner "Signal dispatcher" (0x4960130) 1 entry
Thread queue lock: owner "Signal dispatcher" (0x4960130) 1 entry
Waiting to be notified:
"main" (0x2f2888)
Monitor registry: owner "Signal dispatcher" (0x4960130) 1 entry

Following is the code i am using
i create an instance of this class in another class.
when i run this class, i get to see only a blank window but no image on that...
any ideas!!
import java.awt.*;
import java.awt.event.*;
import javax.swing.event.*;
import javax.swing.*;
class SplashWindow extends Window
     Label l;
     Label l2;
     Label l3;
     Label l4;
     SplashWindow(Frame parent)
               super(parent);
               Dimension screenDim = Toolkit.getDefaultToolkit().getScreenSize();
               Rectangle winDim = getBounds();
               setSize(300,200);
               setLayout(new BorderLayout());
               //l = new Label(" Solutions Demo");
               //l.setFont(new Font("",1,20));
               Image splashImage = Toolkit.getDefaultToolkit().getImage("spalsh.jpg");
               //add(l, BorderLayout.WEST);     /* Center the window */
               JLabel label = new JLabel(new ImageIcon(splashImage));
               add(label, BorderLayout.CENTER);
               setLocation((screenDim.width - winDim.width) / 2,     (screenDim.height - winDim.height) / 2);
               setBackground(Color.gray);
               setVisible(true);
               try
                    Thread.sleep(4000);
                    dispose();
               catch (InterruptedException ie)

Adding image on panel

My applet is in 5 panel and I would like to add an image to my South panel. How can I do this?

Try this,
class p1 extends Panel
Image image;
public canpan(Image img)
image = img;
public void paint (Graphics g)
if (image == null)
return;
g.drawImage(image, 0, 0, this);
}

Background layer seizes added images.

I am trying to create a photo collage by scratch (not using "Collage"). First I create a new blank page for the background and save it. It is shown as "locked" with a padlock. Then I open an image file (.jpg) to add to the background layer, and I get a message that I need to unlock the background layer so I click to unlock it. However the added image locks onto the background layer and doesn't make a new layer. If I open another image file it locks on top of the others.

The Layers panel only shows the layer(s) belonging to the currently active file. You need to arrange your image windows so that you can see your composite image as well as the source. With the source image active the Layers panel will show the source - click and drag that layer to the composite.
So in the following, the violet image is the active image and I drag its layer to the white image I've created for my collage. In the composite image with the new layer selected I can position it where I want. Select each of the other images in turn and do the same. Refer to my previous note, you can also do this with Copy & Paste.
When finished, your composite image and its Layers panel will look like this:
Cheers,
Neale
Insanity is hereditary, you get it from your children
If this post or another user's post resolves the original issue, please mark the posts as correct and/or helpful accordingly. This helps other users with similar trouble get answers to their questions quicker. Thanks.

Image Editing panel

Hi,
I am trying to remove red-eye in a picture but cannot find
the red-eye tool in Fireworks MX 2004 (which is no longer supported
by technical assistance). The help menu is that it is in the "image
editing panel" under the "windows" menu. I cannot find it. Please
help.
Desperate website manager in RI

raymcharl wrote:
> Hi,
>
> I am trying to remove red-eye in a picture but cannot
find the red-eye tool in
> Fireworks MX 2004 (which is no longer supported by
technical assistance). The
> help menu is that it is in the "image editing panel"
under the "windows" menu.
> I cannot find it. Please help.
>
> Desperate website manager in RI
>
Tools panel, within the Rubber Stamp tool set.
Jim Babbage - .:Community MX:. & .:Adobe Community
Expert:.
Extending Knowledge, Daily
http://www.communityMX.com/
CommunityMX - Free Resources:
http://www.communitymx.com/free.cfm
.:Adobe Community Expert for Fireworks:.
news://forums.macromedia.com/macromedia.fireworks
news://forums.macromedia.com/macromedia.dreamweaver

Recently I tried adding disc menu to my project and an error occurs and system shuts down using pre9

Recently I tried adding disc menu to my project and an error occurs and system shuts down using pre elements 9 on mac how can this be repaired

From the Premiere Elements Information FAQ http://forums.adobe.com/thread/1042180
•What version of Premiere Elements? Include the minor version number (e.g., Premiere Elements 9 with the 9.0.1 update).
•What operating system? This should include specific minor version numbers, like "Mac OSX v10.6.8"---not just "Mac".
•Have you installed any recent program or OS updates? (If not, you should. They fix a lot of problems.)
•What kind(s) of image file(s)? When talking about camera raw files, include the model of camera.
•If you are getting error message(s), what is the full text of the error message(s)?
•What were you doing when the problem occurred?
•What other software are you running?
•Tell us about your computer hardware. How much RAM is installed? How much free space is on your system (C:) drive?
•Has this ever worked before? If so, do you recall any changes you made to Premiere Elements, such as adding Plug-ins, brushes, etc.? Did you make any changes to your system, such as updating hardware, printers or drivers; or installing/uninstalling any programs?
And some other questions...
•What are you editing, and does your video have a red line over it BEFORE you do any work?
•Have you viewed the tutorial links at http://forums.adobe.com/thread/1275830 page?
•Which version of Quicktime do you have installed?

Can I move the Toolbox and Menu panels in Elements 12 Editor to suit my workflow?[was: Peter London]

Can I move the Toolbox and Menu panels in Elements 12 Editor to one side when the monitor (1920x1080, 16:9) is in the lanscape position, and to the bottom when the monitor is rotated to the vertical position, so that I can work on the largest image possible?

I think you can .
1. Use extended monitor.
2. Open Photoshop Elements. Make sure following option is checked:
Edit>Preferences>General: Allow Floating Documents in Expert Mode
3. Create a new floating document and drag it to the second monitor.
Start working on the first monitor(having PSE) with canvas on second monitor....
I hope this is what you wanted?

Error while adding Image: ORA-00001: unique constraint

Dear all,
I have an error while adding images to MDM I can´t explain. I want to add 7231 images. About 6983 run fine. The rest throws this error.
Error: Service 'SRM_MDM_CATALOG', Schema 'SRMMDMCATALOG2_m000', ERROR CODE=1 ||| ORA-00001: unique constraint (SRMMDMCATALOG2_M000.IDATA_6_DATAID) violated
Last CMD: INSERT INTO A2i_Data_6 (PermanentId, DataId, DataGroupId, Description_L3, CodeName, Name_L3) VALUES (:1, :2, :3, :4, :5, :6)
Name=PermanentId; Type=9; Value=1641157; ArraySize=0; NullInd=0;
Name=DataId; Type=5; Value=426458; ArraySize=0; NullInd=0;
Name=DataGroupId; Type=4; Value=9; ArraySize=0; NullInd=0;
Name=Description_L3; Type=2; Value=; ArraySize=0; NullInd=0;
Name=CodeName; Type=2; Value=207603_Img8078_gif; ArraySize=0; NullInd=0;
Name=Name_L3; Type=2; Value=207603_Img8078.gif; ArraySize=0; NullInd=0;
Error: Service 'SRM_MDM_CATALOG', Schema 'SRMMDMCATALOG2_m000', ERROR CODE=1 ||| ORA-00001: unique constraint (SRMMDMCATALOG2_M000.IDATA_6_DATAID) violated
Last CMD: INSERT INTO A2i_Data_6 (PermanentId, DataId, DataGroupId, Description_L3, CodeName, Name_L3) VALUES (:1, :2, :3, :4, :5, :6)
Name=PermanentId; Type=9; Value=1641157; ArraySize=0; NullInd=0;
Name=DataId; Type=5; Value=426458; ArraySize=0; NullInd=0;
Name=DataGroupId; Type=4; Value=9; ArraySize=0; NullInd=0;
Name=Description_L3; Type=2; Value=; ArraySize=0; NullInd=0;
Name=CodeName; Type=2; Value=207603_Img8085_gif; ArraySize=0; NullInd=0;
Name=Name_L3; Type=2; Value=207603_Img8085.gif; ArraySize=0; NullInd=0;
I checked all data. There is no such dataset in the database. Can anybody give me a hint how to avoid this error.
One thing I wonder: The PermanentId is allways the same but I can´t do anything here.
BR
Roman
Edited by: Roman Becker on Jan 13, 2009 12:59 AM

Hi Ritam,
For such issues, can you please create a new thread or directly email the author rather than dragging back up a very old thread, it is unlikely that the resolution would be the same as the database/application/etc releases would most probably be very different.
For now I will close this thread as unanswered.
SAP SRM Moderators.

In outlook 2013 Add-In, Adding dynamic menu to splitButton idMso="DialMenu" is working and the same code is not working in outlook 2010 Add-In.

In outlook 2013 Add-In, Adding dynamic menu to <splitButton idMso="DialMenu"> is working and the same code is not working in outlook
2010 Add-In. please let me know, if i am missing something. Below is the xml and screen shot
<contextMenu idMso="ContextMenuFlaggedContactItem">
<splitButton idMso="DialMenu">
<menu>
<dynamicMenu id="CallContactwithFreedomvoice
" label="CallContactwithFreedomvoice"
getContent="OnGetContenttest" insertAfterMso="Call"/>
</menu> </splitButton> </contextMenu>

Hi Narasimha prasad2,
Based on the description, the context menu for the flagged contact doen't work in Outlook. I am tring to rerpoduce this issue however failed.
I suggest that you check the state of the add-in first to see wether the add-in was loaded successfully.
Regards & Fei
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

CC 2014 nik efex - My Nik Efex filters are not working in Photoshop CC 2014 - they appear under plug-ins and seem to work, but after running and clicking okay, no new layer appears - seems to have no effect. The separate menu panel does not appear either

My Nik Efex filters are not working in Photoshop CC 2014 - they appear under plug-ins and seem to work, but after running and clicking okay, no new layer appears - seems to have no effect. The separate menu panel does not appear either. Help with this?

BINGO !!!!
Thanks so much Woodsroad. I had the exact same problem with my Dell Windows 7 64 bit with AMD Radeon 6700 Video card.
All the video tests passed with flying colors.
The sniffer rename trick fixed the problem.
Thank goodness for the internet!

Apple have a big flaw adding images to Apple TV coding error.

Hi all, it seems Apple have a big flaw in there new version of itunes 8.2.0.23.
So heres the problem if you have a Apple Tv system. Adding images is great however the softwares flaw is when you have a lot of images. i have over 3000, and tick boxes apear half way in the list, for know reason.
i have add a link to show you guys and girls a screen shot...
can anyone from apple sort this out?
it really bugging me. as it happens of vista, xp, windows 7, and osx.
Cheers
Adam
null

apple don't monitor the forums for bug reports... this is a user-to-user support forum.
you should report it via the official method - http://www.apple.com/feedback/appletv.html

Adding Images to the List component

Adding Images to the List component while using the FLV
PLayback
All, ( i can send you my source files if it would help)
I'm using the FLV Playback component and loading videos into
it from an external xml file. I also have a list component tied to
the FLV playback that when you click on one of the elements in the
list, it plays that movie.
QUESTION:
My question is how do I add an image to the list component?
Below is the xml file and the actionscript. I've added the image
attribute to the XML file as img="time_square.jpg" and added the
element of the array when calling/creating the list. Did I do this
right?
Any direction would be very much appreciated.

Adding Images to the List component while using the FLV
PLayback
All, ( i can send you my source files if it would help)
I'm using the FLV Playback component and loading videos into
it from an external xml file. I also have a list component tied to
the FLV playback that when you click on one of the elements in the
list, it plays that movie.
QUESTION:
My question is how do I add an image to the list component?
Below is the xml file and the actionscript. I've added the image
attribute to the XML file as img="time_square.jpg" and added the
element of the array when calling/creating the list. Did I do this
right?
Any direction would be very much appreciated.

Adding images and buttons without a frame appearing

I would like to add images to some of my pages without having them appear in a frame. I would like to place some transparent gifs on the page to use as buttons for hyperlinks. I would also like to have some photos (with transparent backgrounds that appear on the page and are not surrounded by a picture frame. Any Suggestions

iWeb seems to default to stroking newly-added images and shapes. Pages (iWeb's close relation) includes a way to change the default appearance, but I can't find anything similar in iWeb. You can, of course, remove the stroke using the Graphic Inspector (just set Stroke to None). Transparency in gifs and photo images is supported. Just drag into iWeb or use Insert > Choose... Again, remove the stroke if this appears.

Email Link... and Email Image menu items don't work.

Suddenly, about a week ago, the Email Link... and Email Image menu items stopped working. Problem seems to be on only one login on one of my three machines. The rest seem to be OK.
Using FF 19.0 and TB 17.0.3 under Windows 7.
Any ideas?

Thank you. Although I had already checked the MailTo: application and found it set to "Use Thunderbird (default)", clearing that association and setting it to "Always Ask" jarred things loose. When I set it back to T-Bird, it worked again.
Again, thanks for the nudge.

Problem with APEX tree in 4.1.1.00.23-while adding context menu

Hi,
Version : Apex 4.1.1.00.23 and Oracle Database 11g Enterprise Edition Release 11.2.0.3.0 - 64bit Production
i wanted to add context menu to my tree region.i followed Jason's blog
http://jastraub.blogspot.com/2010/09/adding-context-menu-to-tree-region.html
But after i add the javascript code he mentioned,nothing seems to have changed.The context menu appears the same way it was before.
Is there anyone facing similar problem?
Appreciate your comments,

Also using Apex 4.1 and I successfully adapted the steps to my application and it worked well ... the context menu and the tool tips come up well and are functional. The only issue I am still having is that the drop-down arrows no longer work ... I had to use a dynamic action to keep the trees all expanded when the page loads. However, I cannot collapse them as I used to (if needed). I am looking forward to a fix to this issue too.
Gerald

Adding "Image menu/panel"

Similar Messages

Maybe you are looking for