Adding image to correct/incorrect caption

How do I add an image (tick or cross) as part of the quiz correct / incorrect caption?

Hi there
Create an image that has the desired element as part of the image and save it somewhere on your drive. Then, edit the caption in Capitvate. Look in the properties panel at the General section. There, you should see a file folder icon that will (when clicked) allow you to browse to the image!
Cheers... Rick

Similar Messages

Using Correct/Incorrect captions & Branching?

Hi,
I'm still new to Captivate, and here's what I'm trying to do.
I'm using questions as formative, individual questions in a branching scenario, rather than as graded questions. When a student submits an incorrect response, I want to say, "Actually, the correct answer is X." Or, "That's correct." And include some "Feedback on the page." Fine; I know how to do that.
And, I want it to branch. So, after seeing the appropriate caption, clicking still takes the user to page B if their answer was incorrect, but to page C if their answer was correct.
I can figure out how to do the branching or the captions but not both. The only way I figure to do this at all is to not use captions but just branch based on the student's submission and take student to a Pre-A or Pre-B page that includes all the content from the question slide (except I can't use the "radio buttons"), painstakingly recreated, plus the caption and feedback text. Then the user could Continue to Page A or Page B. That seems like so much more work than should be needed.
Suggestions so welcome! Thanks.

Hi,
Thanks for asking.
I'm using CP4.
By radio buttons, I mean the choices in the regular multiple-choice question. (I'm not doing anything with image buttons or Flash button widget.)
I'm not sure what your second question quite means. Let's see if this helps. I can work out branching using the Advanced Options for each answer choice, or, in this case, via just if Correct or if Incorrect, as I simply have two paths, one for Correct and one for Incorrect, regardless of which incorrect response a student submits. I've accomplished branching using either of these methods.
What I'm trying to work out is that Captivate seems to allow that a Success caption or a Failure caption appears after the student Submits a response. Great. I want that, so I can indicate if their answer is correct or not. After that, however, I want the student who submitted a correct response to branch to Location A, while the student who submitted an incorrect response to branch to Location B.
Maybe I do need a click box. Do I need two click boxes, one for each case - Success and Failure? Does that mean that I'd need to put the Success caption in one place and the Failure caption in another place, and create a click box for each? (RIght now, I have them appearing in the same place, because they're never both present. It makes more UI sense.) Can I then control it so that a clickbox appears either only IF its respective caption appears?
Thanks again!

Can correct/incorrect captions stay visible after quiz is answered?

Hi,
Currently using the default master slide for Multiple Choice and True/False quizzes when the student answers the quiz and presses the Submit button an incorrect or correct caption will appear with a prompt to "Click anywhere or press 'y' to continue. When the student clicks or presses 'y' they go to the next screen but if they decide to go back and review the quiz the incorrect/correct caption is not displayed. Is there a way to have this caption stay visible once a quiz has been answered so the student will know if they got the quiz right or wrong?
Cheers,
Richard

Just one detail in Lilybiri's post that I want to make sure everyone understands. In Lilybiri's example the Review Mode custom variable she has set up gets set AFTER all quiz attempts have been exhausted.
As she points out, she has dragged the Review Quiz button underneath the Retake Quiz button so that the ONLY way the user can initiate Review Mode is by exhausting the number of allowed attempts. This is a critical point. Because unless you do this, and both Review Quiz and Retake Quiz buttons are visible side by side on the slide, the user could click Review Quiz BEFORE they have exhausted all quiz attempts and then the solution would not work as expected because the custom variable has not yet been set.
So be sure to read and follow Lilybiri's instructions exactly. As usual, she provides a great solution.
Rod Ward
http://www.infosemantics.com.au/troubleshoot-adobe-captivate

Using custom "Correct/Incorrect" images

Is it possible to use images as the "Correct/Incorrect" captions for quiz questions? I'd like to use a green check mark or red X instead of the default "Correct/Incorrect - Click anywhere to continue" text captions.
Thanks!

Hello,
Worked out an example to be able to explain the work flow:
on the question slide I delete the Success/Fail captions (you can keep the Hint if you want, I deleted it as well)
I imported two graphics (see Timeline, sorry for Dutch): Rood and Groen that are displayed for rest of slide duration, but in the PI set to be invisible
normally you have to actions when a user has answered a question: after Submit the Failure/Success captions popup, that also give the message to click on the slide or Y to continue; the first action will not be executed anymore because there are no Failure/Success captions anymore; when the user clicks on Submit, the playhead will continue to play; for this reason I incremented the slide duration, so that the graphics will be visible (in this example) for 4.5secs (after the pausing point) before the playhead reaches the end of the slide and goes to the next slide.
if the graphics may remain on the slide (when user gets back or reviews), you do not need an advanced action, just choose 'Show Rood' for the action on Failure (image for incorrect answer) and 'Show Groen' on Success. You find this in the Quiz Properties (see second screenshot)
if the user can return to the slide and change the answer, you'll better create an advanced action, in which you Show the proper image and Hide the other one.

Quiz Captions for Correct & Incorrect answers

I have a quiz in which I've deleted the Correct and Incorrect captions on each question. My boss has had a change of heart and now would like to provide feedback using these captions. In the Quiz properties, I can bring the Correct caption back onto the slide but can't seem to do the same with the Incorrect caption. Does anyone know of a way I can get this done?

Try putting Failure Levels at something else than None
Lilybiri

Indicated Image Orientation is Incorrect

Hi all:
Aperture 2.1.1 has begun to incorrectly tag images in the portrait orientation as “Landscape,” even though the images were correctly oriented as portrait during import and when viewing them in the Browser or Full screen mode. Doesn’t matter which camera (Nikon D80, Canon Powershot SD600 or Panasonic DMC-TZ1) I import from.
Additionally, when viewing the incorrectly tagged images in the Finder window, set to column view, portrait-oriented images correctly oriented in Aperture are incorrectly oriented as landscape in the Finder window. They also open as landscape-oriented images in Preview. If I correctly rotate the image in Preview, then save the file, the Finder correctly displays the image, but the thumbnail in Aperture becomes corrupted: The image orientation in the Browser window remains as portrait, but the image preview has rotated 90 degrees.
Can’t tell if this occurred since upgrading to Aperture 2.1.1 or Mac OS 10.5.5. Any ideas?

Thanks for the tip. I did exactly what you suggested and ended up with over 2000 extra versions (sometimes up to six) of my files, some with strangely cropped previews, and files long since deleted. All these extra versions did not include any metadata I added (i.e., keywords, description, byline, city, state, etc.). In some cases the file name reverted back to the original one assigned by the camera(s).
Meanwhile, rebuilding the database did not solve the incorrect orientation tag issue. All my images are referenced masters. No masters in my database are stored in the Aperture library.
Thanks for any advice out there.

Background layer seizes added images.

I am trying to create a photo collage by scratch (not using "Collage"). First I create a new blank page for the background and save it. It is shown as "locked" with a padlock. Then I open an image file (.jpg) to add to the background layer, and I get a message that I need to unlock the background layer so I click to unlock it. However the added image locks onto the background layer and doesn't make a new layer. If I open another image file it locks on top of the others.

The Layers panel only shows the layer(s) belonging to the currently active file. You need to arrange your image windows so that you can see your composite image as well as the source. With the source image active the Layers panel will show the source - click and drag that layer to the composite.
So in the following, the violet image is the active image and I drag its layer to the white image I've created for my collage. In the composite image with the new layer selected I can position it where I want. Select each of the other images in turn and do the same. Refer to my previous note, you can also do this with Copy & Paste.
When finished, your composite image and its Layers panel will look like this:
Cheers,
Neale
Insanity is hereditary, you get it from your children
If this post or another user's post resolves the original issue, please mark the posts as correct and/or helpful accordingly. This helps other users with similar trouble get answers to their questions quicker. Thanks.

I am creating a check on learning with 2 responses and want to create a correct/incorrect response

I am creating a check on learning which is scenario based. I want the student to be able to select whether it is permissible or nonpermissible. I had thought to do this with 2 objects--each associated with a clickbox to indicate a correct/incorrect response but this doesn't work. How can I achieve this?

Could you please explain what you want in a little more detail? I'm a bit unsure about what you want the student to indicate is either permissable or non-permissable.
If you are using Click Boxes positioned over objects that the user should click to indicate their choice, have you set the click boxes to show feedback captions?

Adding images to a slide show

I'm sure this has been asked a bazillion times here but I'm
so new to Flash (we're talking a couple of days) that I wouldn't
know what to search on much less what question(s) to ask. That
having been said I'm tasked with adding images to an existing Flash
site that has 4 slide shows (it's for a photographer). I have all
of the .fla files and I can successfully change an image but when
it plays it's taller than the other existing images (even though
they are the same height in pixels) and I'm sure fixing that is
just a couple of clicks.
He said with false self-confidence...
I have other, more specific, questions but it's better to ask
them in
this
image to be more clear about what I'm referring to (without
knowing the correct terminology).
I know Photoshop, ImageReady, Illustrator and GoLive (so I'm
no knucklehead) but Flash is a whole new ball game so I apologize
for my ignorance. Once I get up to speed with Flash I won't be
asking dumb stuff like this.
As a sidebar question what's the best way to get up to speed
with Flash? Is Lynda.com any good?
TIA

I had to restart and opened the file. It asked me if I wanted to try to recover the operations in process before. I said yes. Then it gave me this error which was similar to one of the first two errors I got but did not write down.
[SQLC/interOpen] SQLError: ‘Error #3125: Unable to open the database file.’, details: ‘Connection closed.’,operation: ‘open’, detailID:’1001’

Error while adding Image: ORA-00001: unique constraint

Dear all,
I have an error while adding images to MDM I can´t explain. I want to add 7231 images. About 6983 run fine. The rest throws this error.
Error: Service 'SRM_MDM_CATALOG', Schema 'SRMMDMCATALOG2_m000', ERROR CODE=1 ||| ORA-00001: unique constraint (SRMMDMCATALOG2_M000.IDATA_6_DATAID) violated
Last CMD: INSERT INTO A2i_Data_6 (PermanentId, DataId, DataGroupId, Description_L3, CodeName, Name_L3) VALUES (:1, :2, :3, :4, :5, :6)
Name=PermanentId; Type=9; Value=1641157; ArraySize=0; NullInd=0;
Name=DataId; Type=5; Value=426458; ArraySize=0; NullInd=0;
Name=DataGroupId; Type=4; Value=9; ArraySize=0; NullInd=0;
Name=Description_L3; Type=2; Value=; ArraySize=0; NullInd=0;
Name=CodeName; Type=2; Value=207603_Img8078_gif; ArraySize=0; NullInd=0;
Name=Name_L3; Type=2; Value=207603_Img8078.gif; ArraySize=0; NullInd=0;
Error: Service 'SRM_MDM_CATALOG', Schema 'SRMMDMCATALOG2_m000', ERROR CODE=1 ||| ORA-00001: unique constraint (SRMMDMCATALOG2_M000.IDATA_6_DATAID) violated
Last CMD: INSERT INTO A2i_Data_6 (PermanentId, DataId, DataGroupId, Description_L3, CodeName, Name_L3) VALUES (:1, :2, :3, :4, :5, :6)
Name=PermanentId; Type=9; Value=1641157; ArraySize=0; NullInd=0;
Name=DataId; Type=5; Value=426458; ArraySize=0; NullInd=0;
Name=DataGroupId; Type=4; Value=9; ArraySize=0; NullInd=0;
Name=Description_L3; Type=2; Value=; ArraySize=0; NullInd=0;
Name=CodeName; Type=2; Value=207603_Img8085_gif; ArraySize=0; NullInd=0;
Name=Name_L3; Type=2; Value=207603_Img8085.gif; ArraySize=0; NullInd=0;
I checked all data. There is no such dataset in the database. Can anybody give me a hint how to avoid this error.
One thing I wonder: The PermanentId is allways the same but I can´t do anything here.
BR
Roman
Edited by: Roman Becker on Jan 13, 2009 12:59 AM

Hi Ritam,
For such issues, can you please create a new thread or directly email the author rather than dragging back up a very old thread, it is unlikely that the resolution would be the same as the database/application/etc releases would most probably be very different.
For now I will close this thread as unanswered.
SAP SRM Moderators.

Apple have a big flaw adding images to Apple TV coding error.

Hi all, it seems Apple have a big flaw in there new version of itunes 8.2.0.23.
So heres the problem if you have a Apple Tv system. Adding images is great however the softwares flaw is when you have a lot of images. i have over 3000, and tick boxes apear half way in the list, for know reason.
i have add a link to show you guys and girls a screen shot...
can anyone from apple sort this out?
it really bugging me. as it happens of vista, xp, windows 7, and osx.
Cheers
Adam
null

apple don't monitor the forums for bug reports... this is a user-to-user support forum.
you should report it via the official method - http://www.apple.com/feedback/appletv.html

Adding Images to the List component

Adding Images to the List component while using the FLV
PLayback
All, ( i can send you my source files if it would help)
I'm using the FLV Playback component and loading videos into
it from an external xml file. I also have a list component tied to
the FLV playback that when you click on one of the elements in the
list, it plays that movie.
QUESTION:
My question is how do I add an image to the list component?
Below is the xml file and the actionscript. I've added the image
attribute to the XML file as img="time_square.jpg" and added the
element of the array when calling/creating the list. Did I do this
right?
Any direction would be very much appreciated.

Adding Images to the List component while using the FLV
PLayback
All, ( i can send you my source files if it would help)
I'm using the FLV Playback component and loading videos into
it from an external xml file. I also have a list component tied to
the FLV playback that when you click on one of the elements in the
list, it plays that movie.
QUESTION:
My question is how do I add an image to the list component?
Below is the xml file and the actionscript. I've added the image
attribute to the XML file as img="time_square.jpg" and added the
element of the array when calling/creating the list. Did I do this
right?
Any direction would be very much appreciated.

Adding images and buttons without a frame appearing

I would like to add images to some of my pages without having them appear in a frame. I would like to place some transparent gifs on the page to use as buttons for hyperlinks. I would also like to have some photos (with transparent backgrounds that appear on the page and are not surrounded by a picture frame. Any Suggestions

iWeb seems to default to stroking newly-added images and shapes. Pages (iWeb's close relation) includes a way to change the default appearance, but I can't find anything similar in iWeb. You can, of course, remove the stroke using the Graphic Inspector (just set Stroke to None). Transparency in gifs and photo images is supported. Just drag into iWeb or use Insert > Choose... Again, remove the stroke if this appears.

Javascript - added images display as grey boxes

I am attempting to add an Image to an InDesign document via a javascript that I am executing via the RunScript() soap method of InDesign Cs4 server. The script I am using to add an image is something similar to this:
var imageFile = File("//c/images/animage.pdf");
var imageGraphic = myDocument.pages.item(0).place(imageFile, null, imageLayer);
imageGraphic = imageGraphic[0];
var imageFrame = imageGraphic.parent;
imageFrame.geometricBounds = [IMAGE_TOP_Y, IMAGE_TOP_X, IMAGE_BOTTOM_Y, IMAGE_BOTTOM_X];
imageFrame.fit(FitOptions.proportionally);
imageFrame.fit(FitOptions.frameToContent);
The script adds the image correctly, but when I pull up the document with InDesign, the Images are displayed as grey boxes. I am able to fix this within InDesign designer by manually setting the "Display Performance" to "High Quality" through the menus, but I need to handle this via the script run on the server. I attempted to update the script to the following:
var imageFile = File("//c/images/animage.pdf");
var imageGraphic = myDocument.pages.item(0).place(imageFile, null, imageLayer);
imageGraphic = imageGraphic[0];
var imageFrame = imageGraphic.parent;
imageFrame.geometricBounds = [IMAGE_TOP_Y, IMAGE_TOP_X, IMAGE_BOTTOM_Y, IMAGE_BOTTOM_X];
imageFrame.fit(FitOptions.proportionally);
imageFrame.fit(FitOptions.frameToContent);
//HERE IS THE NEW LINE
imageFrame.localDisplaySetting = DisplaySettingOptions.HIGH_QUALITY;
This script runs without problems within the CS4 ExtendScript Toolkit on my local pc. However, when I run the script against the InDesign CS4 server, I get the following error:
Error Number: 55
Error String: Object does not support the property or method 'localDisplaySetting'
Does anyone have any advice on how I should proceed? My main goal is to have the image display correctly without the grey box.

hello, I'm running into the same issue with image showing up as grey boxes. I'm updating documents via (JS) scripts by placing new images into rectangles. When I open up that document after the script saves it, all I see is a grey box until I change the Display Performance to Typical (or higher). In my scripts, I can change the localDisplaySettings to DisplaySettings.TYPICAL, but it only works locally, when I run this on the server it fails because it says DisplaySettings is undefined. I'm wondering if this is a server setting, and if so, how I might be able to change it?
Thanks in advance!

Adding Image to Search Results

Hi
I am dire need of adding images to search results, particularly the thumb of the resulting product(s). The tags TAG_NAME and TAG_DESCRIPTION work, but TAG_SMALLIMAGE doesn't. Any help would be much appreciated.
Thanks, Teejay

The CSS in http://dandeliongiftshop.businesscatalyst.com/StyleSheets/ModuleStyleSheets.css is causing that overlap.
Search for the below style rule in the above CSS file and make suggested modifications:
.cataloguetitle {
    color: #732772;    font-family: Arial,Helvetica,sans-serif;
    font-size: 14px;
    font-style: normal;
    font-weight: normal;
    position: fixed;          --remove this
    display: block;          --add this
    text-align: center;     --remove this
    text-align: left;          --add this
Should look better.

Adding image to correct/incorrect caption

Similar Messages

Maybe you are looking for